Touch screen not responsive for droid 2

The touch screen on my phone only works when I slide it open. can't unlock phone without sliding it open. very frustrating

        That's very frustrating to have a non responsive touch screen. Have you removed the battery and retested? Did this start after a application was downloaded? Please back up your information on the device thru Google and then master reset the device. Click here for reset instructions. If that doesn't fix the problem please PM me and I will troubleshoot with you further.
Thank you

Similar Messages

  • Touch Screen not working for Google Maps or Youtube

    Just the other day I started noticing a weird issue. The touch screen is non responsive for the top banner on Google Maps (the location field, the transit buttons, the edit button). The touch screen works for the rest of the application. I can move the map around and use any of the buttons along the bottom. It renders the app pretty much useless as I can't enter any new addresses in.
    I also noticed a similar behavior in Youtube. The "Done" button can not be pressed. When I go to the Mapquest iPhone page, I get the same issue...buttons in the top banner do not react to touch.
    At first I thought it might just be a defective screen but other buttons (such as the Text app button in the same location) can be pressed and respond to the touch.
    I've rebooted and even restored to a point before this started happening, but no change.
    Has anyone ever seen this issue or is anyone experiencing it with the above apps? Any ideas?

    I took it in and they replaced it.

  • Touch Screen not responding for setting icon in iPhone5s after upgrade to iOS 8.

    After upgrade to iOS8 in IPhone 5s, the touch screen is not working for settings icon. The settings will be opened on the screen, but unfortunately I can;t use any of the operations available on the setting window. Once I pressed the home menu button or power button and re-open the settings, it works.

    at jpetr1
    Your observation is right. I am facing the same issue after upgrading to iOS 8.3. The trial and error was common with Microsoft .. it seems Apple is catching up with MS .
    I hope they address this issue quickly.

  • Ipod touch screen not responsive.

    I locked my 3rd gen Ipod touch by pressing the power button. Now the screen turns on but there is no response to touch screen. Won't unlock. Any help is appreciated.

    - Try reseting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next restore the iPod from backup via iTunes
    - Last, restore to factory default/new iPod

  • Touch screen not responseing HELP !

    my i phone 3gs has some sort of problem with the touch screen at the below part i can slide to open but i cant press anything at that area how to fix?

    Try this:
    PRESS AND HOLD VOLUME UP + Home Button + Power 
    Turn the phone off
    Press and hold Volume UP and Home (center) button
    Press Power until the phone vibrates
    Wait until you see the Android logo then release all the buttons
    Select Wipe data/Factory reset with VOLUME DOWN, press Power (right hand-side)
    Select YES...delete all user data with VOLUME DOWN and then Press Power
    After format, press Power again to reboot the phone (select reboot system now)
    If you are still unsure you should call VZW tech support.

  • IPhone 6 Touch Screen Not Responsive

    Hi everyone-
    Just curious if anyone is having the same problems as me.  There have been several times now where I'm touching my iPhone 6 screen, but there is no response from the phone.  This happens both within apps as well as on the home screen.  The problem is not just with my phone, but with my fiances iPhone 6 as well.
    I've tried the power on/off but that's more of a temporary fix.  Is it worth going to apple store and asking to switch for a new device?  I've had every iPhone model since the first, this is the first time I've experienced response issues...
    Curious to hear the rest of the communities thoughts.

    Have you ever dropped your phone? You know I thought my screen was acting weird because of the ios updates. It first started twitching in certain apps. When I updated to 8.3 the twitching was gone but then all of a sudden my screen started blink white. Touch won't work but when the screen blinks wildly it will start opening apps on its own. Like a possessed phone it would open things, close, start typing...I'd have to either tap it with my hand or twist the frame a bit and it'll start working. I'm thinking it's because of the several times my phone dropped. Elsewhere I read some people having a clean wipe/factory reset solving their issue...

  • 4 gen touch screen not responsive/responds slowly, not functional.

    I have a 4th Gen iPod touch that I have owned for just over 2 weeks and three different times now the screen has gone unresponsive.  The first two times I restored it (had to restore it twice each time) and it has fixed it.  Now I have tryed to restore it 3 times and it is still not working.  Any suggestions??
    When I say unresponsive, it kind of responds but it is very delayed, and I cant scroll through the screens.
    Any help is much appreciated.

    If you restored it to factory defaults/new iPod and are still having the problrm then it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order. If not try that restore.

  • Bypassing lock screen 5S. touch screen not responsive

    I have the 5S and I broke the screen. The screen now doesnt work so its not respnsive to touch either. I have to use siri for eveything. BUT it died and so I had to recharge it and on the first turn on you have to type in the code always. Is there any way to get around that?

    Daejahnae Carter wrote:
    My mom bout me a iPhone 4 and it has and pass code lock on it. I do not know the owner and can not get in contact with them. Is there any possible way that I could bypass the lock screen and gain access to the phone? 
    Not if it has iOS 7 installed  http://support.apple.com/kb/HT5818

  • Ipod touch touch screen not responsive

    well i went home sick monday from work and i put my ipod touch and my phone in my lunchboxi made sire there was no kind of moisture in the lunch before i put it in my ipod was in my lunch box from about one til atleast 6 at night when i took it out to play some games i tried to slide it to unlock it it wouldnt budge it kept turning on and off and it kept flickering i immediately got on the computer and did some research and contacted apple they sent me a package to put my ipod in when i found out about the water sensor i got a flashlight and made sure that the sensor thingy white and indeed it was i just need some advice i sent it into apple for them to repair it if the water sensor is still white do you guys think they will replace it? please someone help me out ive been praying to the sweet lord above that they will replace it ill keep you guys updated and the next week or so but please someone give me some advice

    I was just wondering if you ever got your replacement Ipod Touch. Something similar happened to me and my ipod stopped working I also checked the the water indicator to make sure it was still white and it was and now I am going to be sending it in to apple and kind of wanted to know if you had gotten yours replaced without a problem.

  • Touch Screen Un-Responsive

    Problem: Touch Screen not fully responsive at all times.
    I broke one screen trying to answer calls before the ring sequence timed out. 
    After missing 7 calls over  a few hour time span, I tried harder and harder presses on the screen.
    Lesson learned - take it back anytime it hiccups.   The phone was 5 to 6 weeks old.....
    That phone was sent off for out-of-warranty repair.
    The replacement (luckily I had a line up for upgrade) has the same problem, but not as severe.
    The problem seems to be worse under high humidity weather conditions. 
    Problem: Repaired Phone now unable to be brought out of standby
    The original arrived back from repair. 
    The screen was replaced, and the LCD was reported to be damaged in shipping, so it was also replaced.
    The phone now will not wake from standby, under any circumstances.  You have to remove the battery and restart.
    I have the screen timeout set for 30 minutes.  At least it lets me do some things via WiFi.
    I have done a Full Reset, format SD Card and format Phone Storage. 
    I have also done a complete firmware reload. 
    Anyone have any ideas?

    Yuy can try the standard fixes to rule out a software problem:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restor to factory defaults/new iPod.
    If you still have the problem that points to a problem like bad digitizer. Apple will exchange your iPod for $99, $149 or $199 depending upn the capacity.
    A third-party place may be less expensive. Google for more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replae the screen yourself
    iPod Touch Repair – iFixit

  • Touch screen doesnt response anymore.

    So, my phone did get bricked by some extras-devel software, I had to re-flash it (OS and EMMC). Now after flashing touch screen doesnt response anymore. If tried to flash it again (OS and EMMC) without luck, still it doesnt response to anything. Can't get past the settings menu. Is there a way to fix this or do I need to send it to Nokia Care?

    hmm.  wierd.
    so your have a device that is at factory specs now, with absolutely no software on it with exception to the OS, and your touch still does not work?
    if it were me, i would crack the phone and make sure that the flex-cable is attached, and if it wasn't, i would connect it and try again. ....
    however, if it was connected and didnt work, or you are not comfortable doing that, then i would take it to a nokia service center for repair.   IF you are in the USA, then that would mean going online to this site, http://www.nokiausa.com/get-support-and-software/repair-and-recycle/repair/repair-locator and then put your imei in and get a print screen of the warranty information and then finish the rest of the questions online until you get the confirmation page that you mail in with your phone.
    if the website doesnt work, as it had problems when i was trying to do it, then call in to their customer service number @ 1-888-665-4228 and they will help you over the phone with the same thing.
    if you have to mail it in, be sure you take out your battery, sim card, stylus, battery cover, memory card.  (you will not get them back)

  • IPhone 4 touch screen not working

    iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

    Good Morning S.GOPINADHAN,
    I understand your iPhone screen is black and you are not able to turn it on.  The article below will explain what to do when your iPhone is not responsive.  I'll also include instructions on how to back up your iPhone when you are able to turn it on.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    iCloud: Back up your iOS device to iCloud
    https://support.apple.com/kb/PH12520?locale=en_US
    Regards,
    - Judy

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Lenovo A1 - Touch screen not working after digitizer replacemen​t

    After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
    But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways. 
    I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
    When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

    Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
    You can say thank you by pressing the star left to my post IF I HELPED YOU

  • Touch screen not responding as it should

    Touch screen not responding properly and keeps locking up.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for