Touch screen not working after installing windows 8.1 hp pavilion ts 15-n200se laptop

touch screen keybord is comming but touch screen is not working no responses...plz help me

Hi @jewaxen
Welcome to the HP Forums!
It is a fantastic place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your touchscreen is not responding.
Was there any changes made before this issue occurred?
Have you checked for viruses or malware? Microsoft Malicious Software Removal Tool
Have you ran the HP Support Assistant to aid with HP updates and resolving issues?
Have you tried using Using automated troubleshooting (Windows 8)
Here is a link to Troubleshooting touch screen issues in Windows 8 that will guide you through some steps.
If after completing the steps in the above link the issue remains, I suggest contacting HP support for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Lenovo A1 - Touch screen not working after digitizer replacement

After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways.
I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
You can say thank you by pressing the star left to my post IF I HELPED YOU

HP Pavilion 11 x360 - touch screen not working after upgrading to Windows 8.1 Pro

I installed windows 8.1 pro and now my touch screen isnt working. i checked system screen and it says NO PEN OR TOUCH INPUT AVAILABLE
and i have 2 keys swoped on my keyboard. The @ and " i

Hello theow,
Welcome to the HP Forums!
I understand the touch screen on your notebook is not detected after updating to Windows 8.1.
This would be the best place to start: Troubleshooting Touch Screen Issues in Windows 8. This is a great document that covers touchscreen issues from start to finish. Do not be alarmed that it states the document pertains to TouchSmart PC's, as the steps are the same.
It would also help to know which product you are using so I can give you more detailed information, such as driver downloads.
For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
Hopefully this gets you going!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Touch screen not working after windows 10

Touch screen is not working after windows 10 was down loaded. Also the zoom keeps changing on it's own. Does anyone know how to fix this?

Could you provide the unit's Model name/number?

Touch screen not working after update

Hi, I am using Sony laptop which have the model name: SVF14N11CXB. Till yesterday it was working fine, when I shut it down it did its mandatory update. However, today when I start it up its touch stopped working, Although this laptop is touch supported and till now the touch screen was working perfectly but today when I searched in the computer properties it is showing that this laptop is not pen or touch supported. I restored my laptop to factory default but still it is not working and making me go crazy. Please help me in this regard.
Thanks.

Hi Pirat3,
Welcome to Sony Community!
We regret to hear that the touch screen feature is not working anymore. You're right this laptop has a touchscreen function. Click here for more information. You mentioned that you reformat the computer back to factory default, if done properly the computer should be back up and running the way it was when you first got it (including the touch feature). Kindly visit this website and reformat again the computer back to default setting. Please follow thr instructions there carefully.
Keep me posted.
Thanks,
Jen
If my post answers your question, please mark it as "Accept as Solution"

Hp pavilion g6-2305tx left side usb 3.0 not working after installing windows 7 home premium

Hi ,
The left usb ports are not working on my pavillion g6 2305tx after a fresh win 7 installation. Already installed chipset drivers, but this doesnt solve the problem.
Please check the screenshot below.
Kindly help.
Thanks

Hi,
Please try installing window 7 USB 3.0 driver for the following issue
For Win 7 64 bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?
cc=us&lc=en&dlc=en&softwareitem=ob-102571-1
For Win 7 32 bit
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescript
ion.jsp?
cc=us&prodSeriesId=5260575&prodNameId=5260578&taskId=135&swItem=w
k-106309-1
Regards,
Sumit
I am an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Kudos if my post helped you.

Keyboard and Mousepad does not work after installing windows support software.

I was able to successfully install windows 8.1 64bit on an late 2012 iMac. I went through the installation just fine with the mousepad and keyboard. I went into the desktop and open up the files and went to computer to download the windows support software. After it was done installing the windows support software, my mouse and my keyboard stopped working completely. I couldn't even click "finish" on the download. I turned the computer off by pressing the power button, then turned it back on. I held the option key and the Macintosh HD and Windows showed up. I turned the mousepad and keyboard back on and it was working again. So I clicked on Windows and as I enter the startup screen, the mouse and keyboard stopped working again.
Computer: iMac 21.5 in. late 2012
Used Windows 8.1 Pro 64bit
The keyboard and mousepad that I have is bluetooth.

Hi,
Have you checked it from Sounds yet. Please
Right click the speaker icon
Select Recording devices
You should see a "tick", otherwise Right click it and enable it.
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Webcam not working after installing Windows 7

Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system, which is unexceptable. I should have waited to purchased after windows 7 came out. This is the worse HP computer I have ever owned and the worse customer service. When this orginially happened I was told I had to stay on Windows Vista and customer support did nothing for me. Its been over two years and I thought I would find a repair solution on the HP page, I have tried them all and still now webcam working. I am lost and very angry. I get a code 43 error when trying to load the webcam drivers. My computer keeps giving me a message that windows does not reconize the device installed on my computer. It states its is an unknown divice. I have tried to unstall it, but everytime I restart my computer it reinstalls it. Please help me, I paid over a $1000.00 when this computer came out, HP gave away free windows 7 update when I purchased this computer and my Webcam has never worked since.
Thank you.
Arby96
{Personal Information Removed}

arby96 wrote:
Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system, which is unexceptable. I should have waited to purchased after windows 7 came out. This is the worse HP computer I have ever owned and the worse customer service. When this orginially happened I was told I had to stay on Windows Vista and customer support did nothing for me. Its been over two years and I thought I would find a repair solution on the HP page, I have tried them all and still now webcam working. I am lost and very angry. I get a code 43 error when trying to load the webcam drivers. My computer keeps giving me a message that windows does not reconize the device installed on my computer. It states its is an unknown divice. I have tried to unstall it, but everytime I restart my computer it reinstalls it. Please help me, I paid over a $1000.00 when this computer came out, HP gave away free windows 7 update when I purchased this computer and my Webcam has never worked since.
Thank you.
Arby96
{Personal Information Removed}
Which version of Windows 7 is installed? (32 or 64-bit)
I see there is a BIOS update available only in Vista. You may wish to consider cloning your hard disk to an external storage device. Macrium Reflect Free is ideal for this. Recover your OS to the Vista OS and apply the BIOS update. Use Macrium Reflect and the clone image file that you created to return your notebook to Windows 7. Once you have done that, try the webcam updates available at the HP web support portal for your TouchSmart notebook.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

USBs not working after installing Windows 7. Please assist.

HP - Beats Special Edition
Model: 15-p030nr SKU: 7018105
Problem: 3 USB ports are not working. Does not acknowledge devices plugged into any of the PORTS.
I installed Windows 7. I install all the drivers listed on http://support.hp.com/us-en/product/HP-Beats-Special-Edition-15-p000-Notebook-PC/6936229/model/71742...
I notice there is not any CHIPSET driver folder.
Already attempted START/DEVICE MANAGER/UPDATE DRIVERs. None could be found.
Please advise.
This question was solved.
View Solution.

Hi:
See if downloading and installing the amd chipset drivers works for you. Reboot after install.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

Satellite M100 sound not working after installing Windows 7

Everything else is working after this upgrade except the sound. Have tried everything. Any suggestions?
Many Thanks.
Rory

Hi,
For me the case is clear: Windows 7 is not the market as yet and its not released as yet. So I think this is the problem.
Anyway, have you tried to install the driver from the Toshiba website? There you can also find the Synaptics driver. Its for Vista but normally the drivers for Vista are also work in Windows 7. Its worth a try.
http://www.csd.toshiba.com
Have you tried the key combination FN+F9? So you can enable and disable the touchpad but I doubt that this works. Normally you need the Toshiba utility for this
Greets

Aspire R7 572G touch screen stopped working after a windows 10 upgrade, pls help

I did a windows 10 update, but to my dismay I lost my touchscreen functions. I checked the properties on MY COMPUTER and it now says, pen and touch input not supported. Help pls

Hmmm.. I upgraded my R7 572G but my touch screen is ok. I'm not sure what you did. However, my problem was the screen does not auto-rotate in Windows 10. So I went to this folder to run as administrator to fix the auto rotate problem and it works. C:\OEM\Preload\FIXAUTOROTATE\EnableRotate.cmd

Touch screen not working after system update

A few months ago, my laptop (Satelitte P55t-A5202) went through an automatic system update. Ever since then, my touch screen won't work. I followed the directions to reinstall the HDI programs several times. The first time it worked but only for a few hours. The next time I tried to reinstall, it worked for a second. Now reinstalls do nothing.
Before the system update, my touchscreen worked fine. And in reading the forums, this seems to be a common problem with the updates. I called TOSHIBA customer service for help. The FIRST thing they want to do is charge me for tech support because my laptop is out of warranty. I told the customer service rep repeatedly that my touch screen worked fine until the update. He refused to give me any help because I did not want to pay for him to tell me how to resolve...
In my opinion, this is a toshiba issue not mine so regardless if my laptop is out of warranty, Toshiba should take ownership and be accountable for the problems they cause.
Does anyone have any suggestions as to how to take care of this?
By the way, Toshiba customer service representative was rude, you could barely understand him because of his accent, I had to repeat SEVERAL times what my issue was because he couldn't get past the warranty issue and I had to ask several times to speak with a supervisor ( to which he told me a supervisor would call me instead)

See my reply in the laptop forum.
-Jerry

IPod Touch Screen not Working after using Assistive Touch

Hey everyone!
Yesterday my iPod Touch 4th gen touch screen froze (not the screen itself - it still wakes from sleep & responds to notifications and charging etc.), after myself accidentally taping 'Voice Control' on Assistive Touch.
I was wondering, since it's out of warranty (it's a couple of years old), I can't send it back. I'm currently backing up & restoring it.
Can anyone tell me if it's the software or hardware? It's going to take at least a good day or so to backup & restore, due to storage is full, and it's 32GB capacity, so it'd be good to know in advance.
And if anyone has got any other suggestions to fix it, please let me know! It'll be much appreciated.
Thanks heaps!
PS. Please don't tell me to repair it...it'll cost just as much to fix my whole iPod, buttons & screen than it is to buy a brand new one!!

There is really no what to know if hardware or software problem without trying to restoring the iPod. First from backup and then to factory settings/new iPod. If still problem then it is a hardware problem.

Help please! Keyboard not working after installing windows XP sp3 on T61

I just changed to windows XP sp3 in last weekend on my T61. From then on, when I turn on the T61 every morning, the key board is not working, sometimes I could not type password. I need reboot several times to make it work. I installed the keyboard customizer utility from some online information, however, it's not helping. I searched the lenovo support website, but there are lots of drivers there,I don't know which to pick. Does anyone had met the similar issue or know how to solve it? Thanks a million!

I have exactly the same problem. It is not related to docking for me - just regular standby/resume. A reboot solves the problem. Not exactly what you'd expect from a high-end business model. This is the first time in my over 22 years history of using computers that the keyboard fails randomly. Fix this IMIDIATELY Lenovo!
Message Edited by Chigu on 06-13-2009 12:39 PM

Scanner not working after installing Windows 7

Just installed Windows 7 and lost the ability to use the scanner function in Adobe. My scanner still works with my HP C6380 softwar
e. Was wondering if another driver was available for Windows 7. Yes or no, send if possible
I am usin Acrobat 9.0
I have already done the following.
1)    a. Launch Acrobat
       b. Click menu File->Create PDF->From Scanner->Custom Scan...
       c. In Custom Scan dialog, select the driver installed.
       d. Click Options button in Input section.
       e. Set Data Transfer Method as Native Mode.
       f. Initiate Scan process. Or, remove any compression settings in scanner's user's interface while scanning (Set compression to None).
2) Login with new user Account
3) Deleted Preferences folder.
4) Download the update for 9.1.
5) Repair Acrobat installation.
6) Scan the image into another application as a TIFFfile, and then convert the TIFF file to a PDF file.

Does your scanner work without using Acrobat? If not, you should go to HP's web site and see if there is a Windows 7 driver for your scanner you can download and install.
You should also update Acrobat to 9.3.

Touch screen not working after installing windows 8.1 hp pavilion ts 15-n200se laptop

Similar Messages

Maybe you are looking for