Touch screen not working with internet link in safari

Anyone has the same problem?
After 1.1.1 update, my touch screen occassionally fails to respond any tap on internet links in safari. no matter which web site you go to, no link will work on tap.
I tried to clean catch, cookies, etc. The only way to out of it is to reset the phone (both key pressed).
It happens about once or twice a day, not often enough for Apple people to duplicate it, but enough to bother me.

I have had the same exact problem occur 3 or 4 times since the update. I fix it by turning the phone off and on again.

Similar Messages

Dual HP touch screens not working with t620

HI, I have two L2206tm touchscreens on a t620 thin client running ThinPro 5.1.0. When connecting two monitors, the touch screens function erraticly or not at all. If you only connect one touch screen, it works okay (either monitor, so it's not a problem with the monitors). Some notes:The touch screen applet that's included with ThinPro has a calibrate button is shadowed out. The touchscreens are recognized in the USB as 1 device in the ThinPro USB mgr. (TPV - OpticalTouchScreen)Both touchscreen work when the settings for monitor 1 and 2 are setup as "Same As Primary" (meaning that the displays are mirrored. As soon as you set one of the monitors to be Entended (right or left), the touchscreens stop working.Any help would be greatly appreciated. -Chris

Hi,
The numbers are fine
Try the following.
First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this. Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?

Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Lenovo A1 - Touch screen not working after digitizer replacement

After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways.
I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
You can say thank you by pressing the star left to my post IF I HELPED YOU

My iPod Touch is not working with Bose SoundDock. How can I fix it?

My iPod Touch is not working with Bose DoundDock Series II. Can anyone suggest how I can get these 2 to work together?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
iPod Touch Repair – iFixit

8500 All in One - touch screen not working

One minute the touch screen with all it's functions was working fine and then, bam (!), the touch screen stopped working and I can't even use the one/off switch to power the unit off - it does not respond. Funny thing is that the printer is still working from my computer so I can still send a print job via the wireless. With the touch screen not working I can't use any function from the unit itself (copy a hard copy, fax a hard copy) and if the unit runs out of paper I have to unplug it to reboot since I can't hit the 'enter' on the touch screen once I've reloaded.
Bottom line --- nothing from the unit itself works. Has a printer fairy locked me out or does this sound like a hardware error? Thanks for any help ...
Linda T

Excellent. Let me know how round 2 treats you. The sad demise could have been due to a couple of things...as a side question, is the climate where you live especially dry right now? I may request that our testers recheck how well we handle a static shock on the product if it is dry where you live.
Regards, CF
I work for HP and hope to make your day Sproutastic!

TOUCH SCREEN NOT WORKING XPERIA Z ,

Hi all, can anybody help please, the touch screen is not working on daughters Xperia Z. Loads ok & can power off using the volume + key & power button & then turns on but touch screen still not working, It hasn't been dropped & no liquid spilt on it, only 2 months old. Can't download anything support etc from Sony as it asks to enter the password to open the phone which she can't do as the touch screen not working.Is there another way or does it need to go back to the comapny for repair. It is contarct with VirginThanks in advance

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I'm sorry to hear. If the touch does not work, it's not much that you can do on your own more than performing a software repair to exclude software related problems. This can be done via our program Update service:
http://www.sonymobile.com/global-en/tools/update-service/
Download and install SUS, follow the instructions that appear.
Note that the personal data will be lost when performing this repair and if you cannot access the menu, you are unable to back up this data.
If the problem persist, I suggest that you contact your local support team to get information about how you should proceed in this case:
http://www.sonymobile.com/global-en/support/contact-us/contact-info/

IPhone 4 touch screen not working

iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

Good Morning S.GOPINADHAN,
I understand your iPhone screen is black and you are not able to turn it on. The article below will explain what to do when your iPhone is not responsive. I'll also include instructions on how to back up your iPhone when you are able to turn it on.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
iCloud: Back up your iOS device to iCloud
https://support.apple.com/kb/PH12520?locale=en_US
Regards,
- Judy

Ipod touch screen not working even after resetting to factory specs

ipod touch screen not working even after resetting to factory spec. lock symbol appears at top

That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

Ipod touch 32 GB touch screen not work

32GB ipod touch touch screen not work WHAT TO DO SOME BODY HELP ME MY PHONE NUMBER 09880252978

If your iPod is not dry, dry it before further use. To dry:
How to fix a wet iPod or iPhone | eHow.com
It recommends drying for seven days and changing rice every day.

Sony Vaio Pro 13.3 Touch: Touch screen not working

Hi, The touch screen for my Sony Vaio Pro 13 Touch suddenly stopped working two days ago and I have no idea how to fix it. I didn't install anything new before it stopped working, and I tried to install all the new drivers on the VAIO update but it still didn't work. I thought it might be because of Windows so I updated to Windows 8.1 today and it still does not work. On the PC info it even says" Pen abd touch: No pen or touch input is available for this display". but this laptop is supposed to have touch capability and it has been working up until now. Please help! My model number is SVP13215CDB. Do I need to install or update my driver?

Hi FlyingTortoise,
Was there any changes prior to touch screen not working? Like installing software or hardware? If not, then try using windows system restore to restore back to a date that you know when it was working. If that still does not resolve issue. Then we may have to put the unit back to factory condition to eliminate software related before servicing the unit for hardware.
Nick--

IWeb Page Navigational Links not working with Internet Explorer 7

I'm hoping someone can help me out here? My wife created her 1st website using iWeb. I am testing the sites functionality before we publish it. All the pages and links work fine on Firefox and Safari for windows. However, the page navigational links are not working on Internet Explorer 7. All I see is a dot to the left side of where the page links should be. When I start the site in IE7 I get an Active X script warning and I am asked if I want to allow the script to run; to which I reply yes. After I allow the Active X script the dot to the left side of where the page links should be disappears, but the links do not appear.
Is there anyway to resolve this? Most of the members of her club have Windows based PCs and are using IE7.
Message was edited by: cviz821

Yes, Javascript is running on IE7 and other java script applets appear to be working with the exception of the Navbar script.
It would be great if my wife's friends used a "real" browser, unfortunately 70% of the people on the web use IE7, so this is a real concern if we can't get this to work. I'v seen other iWeb site on IE7 that seem to function fine, so I'm not sure what the issue is here.
Message was edited by: cviz821

Droid Eris touch screen not working

I have the droid eris. I got it off a friend and its been working just fine and all of a sudden the touch screen stopped working. i tried taking the battery out and putting it back in and it still doesnt work. i cant slide and unlock nor are any other touch buttons working. any solutions?

Hello cfarrell856,
Without a touchscreen, you don't have a phone! We need to get your phone fixed quickly! There is an alternate master reset that you can perform without a working touchscreen. I will include a link with the steps. If the reset does not fix the issue, then it's hardware related and you will need to activate another device. Let's hope the reset fixes it!
Click here and follow the "Alternate" method: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=27431
Thank you!
Katie H
VZW Support
Follow us on Twitter @VZWSupport

U430 Touch Screen not working on Ideapad

I just bought a new IdeaPad U430 laptop a few days ago and I love it. However, the touch screen doesnt work. I've looked through the forums and have tried a lot of things and none of it has helped so far. Using the f6 key on the laptop freezes the mouse but the touch screen doesnt seem to recognize my finger. Please help! Like I said, I love everything else about this laptop and I really dont want to return it.
Moderator Note; subject edited; system type added

hi graceella,
Welcome to the Lenovo Forums.
Ideally, the OS automatically identifies if you have unit with a Touchscreen or not. To check, look under Control Panel (large icon view) > System (see images below).
Non-Touchscreen:
- Link to picture
- Link to picture
Touchscreen:
- Link to picture
If the machine is showing No Pen and Touch Input:
1. The OS is not identifying the screen as Touch capable. To isolate, perform a System Recovery (via the OneKey Recovery button) to check if the issue is on the OS level (ensure you backup important files first).
If the machine is showing Limited Touch Support:
1. Recalibrate or Reset the touchscreen
2. Reconfigure the Touchscreen
If same problem,
3. Press the Windows key‌ +R, type devmgmt.msc and press Enter.
4. On the device manager, navigate to Human Interface Devices and uninstall anything that says HID-compliant device. When finished, reboot the system and observe.
5. After the reboot, press Windows key‌ +R, type mspaint and press Enter. On mspaint, try to touch the screen and observe if the touchscreen capability is working.
- Link to picture
If the above steps doesn't resolve the issue, I recommend you contact Lenovo and report the problem (or the place of purchase if it's still possible to exchange the unit).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My touch screen not working please help!!!

I recently baught a hp touchsmart 320-1010a running windows 7 home premium and then installed a new version of windows (windows 7 ultimate 64 bit) and now the touch screen doesnt work and i have non of the hp touchsmart applications like, hp magic canvas and others. i installed all the drivers from the hp webbsite and it still doesnt work
can somebody please help??? im dying here !

Hello Jerome19961996:
Sorry about your wipe out. Are you ready to try it again? This time we will do it the right way. We first have to get you back to orginal factory ok. Lets first see if can use the recovery manger. Type in your all program search box Recover Manager.Open it and click factory restore. If it is still there. If not then you will need to use your recovery disk. If you did not make a copy then you will need to purchase them from HP's parts store. Direction on how to order them are on your computers update page. Ounce you have your computer restored to factory condition. We can now upgrade to Windows 7 Ultimate.
This time we are going to use just the product key number. Goto all programs search box again and type in Windows 7 Upgrade Advisor. Open it and inter the product key that you purchased already. This time do not remove programs or delete any thing. Let it upgrade on it's own. This time everthing that is on your computer already will not be touched. The upgrade will only install what upgrades are needed with out disturbing HP's software. Ounce the initial upgrade is completed then go on line and download Windows 7 Ultimate add on's. Windows XP mode, XP Virtual Windows and Languages . http://windows.microsoft.com/en-US/windows/downloads/windows-7 You should be all set now. Thank and welcome to the forum. Please click on Kodus if this has helped resolved your issue. Thank you.frrw

Touch screen not working with internet link in safari

Similar Messages

Maybe you are looking for