Touch Screen Retrofit for iMac9,1 Screens

I am currently conducting research on virtual organs using the Hauptwerk/Classic MIDIworks systems. These are heavily dependent on touch screens. According to Darryl Wood of Classic MIDIworks " . . . there are a lot of switches inherent in organs. There's no way to implement that many physical switches, multiplied by all the different sample sets, practically or economically." This is why touch screens are recommended. That is to forgo the expense of independent drawknobs ($25 to $50 each) to say nothing of all the pistons, couplers, swell shoe displays and memory level displays that would cause a $7,000 organ project to drastically escalate in cost. I have found a retrofit in the form of the 3M MicroTouch System 3250EX. This is a surface capacitive touch system based on the 3M MicroTouch Controller EX and optimized for displays ranging from 6.4 to 32 inches.
If you do not recommend the 3M system, please send a list of touch screens and necessary connection hardware.

Hi @Bobi617 ,
Welcome to the English HP Consumer Forums!
Please feel free to post a revised message in English.
I understand you are having issues after a possible update on your HP Notebook and your touchscreen not responding. You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
Here is a document on troubleshooting the Touchscreen if the system restore does not help.
Thank you, and have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • How to find screen exit for a screen?

    Hi,
    If you know the transaction, how to find if there is a screen exit exists or not?
    Here even I know the screen number also. I have opened it in screen painter. How can I see if there is a screen exit for the screen?
    Thank you.

    Hii
    Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
    1. Go to the screen>System>Status-->Program (Double
    click this program. It will take you to the program.
    2. Now, Goto-->Object Directory Entry.
    3. Make a note the package name.
    4. Now run the transactions SMOD, press F4 and enter the
    above noted package, press enter.
    5. It will display list of Exits.
    6. Now go back to the initial screen SMOD.
    7. Specify the exit name here and select the radio button
    Components.
    8. It will display four group boxes one for FM, second
    for Fcodes, thrid for Screen areas and last for
    includes.
    9. Goto transaction CMOD, create a new project, and
    click the button "Enhancement assignments" and
    specify your enhancements that you got in SMOD.
    10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
    Screen exit
    Regards
    Naresh

  • How to get the screen groups for the screen field which are on selectionscn

    hiiii Experts,
                   How to know the screen groups for the screen field which are on selection screen.
    Thanks and regards,
    kasyap

         NAME                                             PNPABKRS-LOW
            GROUP1                                             SEL
            GROUP2                                             DBS
            GROUP3                                             LOW
            GROUP4                                             180
    to get this use this:
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        if screen-name CS 'ABKRS'.
          BREAK-POINT.
        endif.
      ENDLOOP.

  • Are there any mac screen savers for multiple screens

    Are there any mac screen savers for multiple screens? like the one in the swordfish movie with john travolta haha

    screensaver +, free from the apps store, will do two monitors.  It does not do three monitors . 

  • Screen changes for Document screens

    Dear All:
    In the documents change screens I want to 'display only'some fields based on values in certain other fields. Would you please suggest some ideas?
    I posted this in the Financials Forum, but havent got any suggestions.
    [Posting in ERP Financials|Re: Document Line Items fields]

    Hi,
    go for the event at selection-screen output and modify your screen, like
    PARAMETERS: TEST1(10) MODIF ID SC1,
                TEST2(10) MODIF ID SC2,
                TEST3(10) MODIF ID SC1,
                TEST4(10) MODIF ID SC2.
    AT SELECTION-SCREEN OUTPUT.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'SC1'.
        SCREEN-INTENSIFIED = '1'.
        MODIFY SCREEN.
        CONTINUE.
      ENDIF.
      IF SCREEN-GROUP1 = 'SC2'.
        SCREEN-INTENSIFIED = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    with luck,
    pritam.

  • In normal view, half the page disappears off right of screen. in full screen this does not happen. what can be done to correct the screen ratio for normal screen?

    version 5 loaded on windows 7. all went well for a while. one day while using, ratio of normal screen doubled in width; i.e. half the page disappears off the screen to the right (on a wide screen). when full screen mode applied, ratio is fine. it only happens in normal view, which is the usually prefered option. I cannot determine any means within the program to resize the normal screen. nothing else is affected, only mozilla firefox in normal view. not that when program is opened from keyboard the page is correct for a moment, then enlarges the width with 1/2 page dissappearing.

    This issue can be caused by the Babylon Toolbar 1.1.8 extension
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Selection-Screen - Warning for similar screens with same info

    Hi Gurus!
    I have a small question regarding the screens. I have a program which splitting of the UWI's. This program has a selection screen  for entry of the company code , plant and date and two radiobuttons to show incomplete ones and all lists. Now the problem is that when this report is used by 3 or 4 people in the department and if they are working on the same plant say 0311, everyone has this screen opened and can make changes without the other person knowing that the other person is also doing changes . I want to make something in the repot that will give a message that this screen is already opened for this particular plant (warning message) which will make the other ppl aware that someone is already working on that plant , not only that evben if a single person has two screens of it opened with similar plant , also it should give message as that its opened for that particular plant. Is it possible please.?
    So like in here in my report I should be adding in something or what?
    *&                  Module  CHECK_INPUT  INPUT                         *
    *                      Field Input Check                               *
    MODULE check_input INPUT.
      DATA: lv_plant TYPE t001k-bukrs.
    **** Checking For Plant Input.
      IF dyn_plant IS INITIAL.
        MESSAGE e000 WITH text-002.
      ELSE.
        SELECT SINGLE bwkey FROM t001k INTO t001k-bwkey
                      WHERE bwkey = dyn_plant.
        IF sy-subrc NE 0.
          MESSAGE e000 WITH text-019.
        ENDIF.
      ENDIF.
    Thanks
    Aarav

    I used the enqueue and dequeue function module in my program to dis-allow two or more people to work on the same screen with similar input of plant ,and I am getting the error message too on the first screen itself that "selected plant si used by another user", but the problem is that its not allowing me to get into it even when I am the first user, I wanted actually it to happen with the second user or if I open up another screen and try inputing same plant and try entering then it should give me the message but its giving me message in the first screen itself and locking , not allowing me to get in.
    Kindly suggest what should I be doing to this happen in the second or thisrd ascreen and so on , but not on the frist screen.
    I put the logical lock after the plant validation happens , but for teh first user it should allowing him to go through the screen  and just give warning for other uses if they enter the same plant and try entering the screen.
    Thanks
    Aarav

  • Screen exit for RF screen LM61

    Hi all,
       I have created a screen exit SAPLXLHU 1765 for the dummy RF screen SAPLLMOB 1765.
      The new screen has to be part of the XLHU function group, as the screen to be modified is for packing by delivery through the RF transaction LM61.
      I have saved this new screen as a local object. and now I am unable to change it or move it into a workbench request by changing the dev class. Even if I delete the screen and create it again it directly saves it as a local object without promting for the development class.
    Is there any other way to assign this to the request.
    Thanks in advance
    Sheetal.

    Hi Sheetal,
    Very interesting, I to am working on a similar enhancement for an RF screen in SAPLXLRF (not SAPLXLHU but the concept is the same). I also saved the enhancement screen as a local object to allow testing but can no longer add it to a development package or transport. Even if I delete and recreate the screen, it still ends up as local.
    I do not need to transport the enhancement screen as yet but will in future. I was thinking of raising a customer message with SAP to see if they could help.
    Let me know if you manage to find a solution.
    Regards
    Che

  • Screen Exit for SAPLMGD1 Screen No. 2156

    Hi All!
    Can anybody give the screen exit name for program SAPLV02Z screen number 2156.This is needed to add a customer field MVKE-ZZMVGR6 to this screen.I had added the field to the screen and now i have to do the coding.I do have the modfication key if required to change the standard SAP program.
    regards
    Praneeth

    Hi,
    these are the exits..
    SD_KNA1_MAINTAIN_EXIT
    <b>SD_KNVV_MAINTAIN_EXIT</b>
    SD_MAINTAIN_SAVE_EXIT
    bold is the one you are looking for ,in that they gave some documentation..
    *   All changes should be made in the includes:                       *
    *      LV02ZTO1 : DATA-Definition                                     *
    *      LV02ZOKV : PBO-Modules                                         *
    *      LV02ZIKV : PAI-Modules                                         *
    *      LV02ZFKV : Forms                                               *
    you need to make the changes in the specified one's.
    Regards
    vijay

  • How to avoid maximal expand of screen size for welcome screen? VmWare prob?

    I run Suns Solaris Express Edition for VmWare under WinXP.
    When I start Solaris VM everything is fine except the fact that the welcome screen at boot up (= the screen where the user has to enter his login and password) is expanded to approx 2400 x1600 pixel).
    I have to use the horizontal scrollbar to get the entry fields for login and password.
    After I entered correctly login and password Solaris retrieves the internal correct display size
    of 1280 x 960 and shrinks the screen size accordingly.
    So again everything is fine from this time except the screen size at the beginning.
    Is this an error of VmWare or of Solaris?

    I agree that iMovie's still image quality is embarassingly bad and has many bugs.
    Even with no Ken Burns, the sharp images tend to flicker on a TV because iMovie doesn't blur them properly.
    And as you very well described, iMovie's Ken Burns produces uneasy zooms/pans because the subpixel rendering is, uh, suboptimal.
    iMovie's immortal rendering bug when exporting non-Ken Burns'ed images to iDVD/tape doesn't make things any better.
    Yes, bicubically downsampling the input images to 640x480 or adding gaussian blur to the megapixel input images takes care of the flicker and uneasy zooms/pans, but as a side-effect the maximal zoom-ins are then TOO blurry.
    The best workaround is to use Photo To Movie's higher quality export setting. It has the best quality rendering engine (I recently compared it to Still Life and FotoMagico). Disclaimer: I'm just a satisfied customer of Photo To Movie.
    See also:
    http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#slideshow

  • Screen exit for me32k for header and for items

    hi experts,
    i need a screen exit  from me32k to add subscreen in :
    1. items
    2. header
    thanks in advanced,
    dana.

    Hi,
    Just some information on screen exits:
    Screen Exit:
    How to implement screen exit for a SAP standard transaction
    Introduction
    SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
    To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
    To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
    An append structure in the database table with the new fields.
    A subscreen area into the standard screen – where the programmer can attach his subscreen of his own program with the new fields.
    A function group under which the new subscreen has to be created with the new fields.
    Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen – so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
    Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
    Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
    Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
    Pre-Requisites
    The developer to work on screen exit should have essential knowledge on the following:
    DDIC concepts, including the knowledge of append structure.
    Concept of SAP Enhancements and implementing them using Projects.
    Concept of function exits.
    Knowledge on Module Pool – including subscreens, Tabstrip controls etc.
    Steps
    Guidelines
    So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
    Find out the Required Enhancements
    Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton ‘SAP Applications’. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest – for e.g., Purchasing, Asset Accounting, etc.
    Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
    Utilize the Enhancement in a Project
    After you have found one, do as directed in the documentation. Generally, the steps are as follows:
    Create a project using CMOD including your enhancement.
    Create the append structure with new fields.
    Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
    Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
    Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
    Activate the project.
    Test to ensure that required functionality are met.
    Case Study 1
    Add three new custom fields for Asset master and maintain information for them
    Requirement
    Three fields in the legacy system have to be maintained in Asset master. These fields are:
    Original Asset number – 20 characters
    Location 2 – 15 Characters.
    Model no – 20 characters
    Location 2 should start with ‘L’.
    Pre-Analysis
    Finding out the Enhancement
    As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
    Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
    Studying the Function Exits
    The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
    EXIT_SAPLAIST_002
    Function module Level Documentation
    This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
    Import Parameters
    Understanding
    This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
    EXIT_SAPLAIST_003
    Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
    Understanding
    This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
    Studying the Documentation of the Enhancement
    The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
    Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
    Deciding the Final course of Action
    After making all the investigations, the final course of action was determined.
    SrlNo Step Justification
    A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
    Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
    A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be ‘CUST’ (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
    In the PAI of the subscreen, validation for Location to start with ‘L’ will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_002’, the following code will be written:-
    ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_003’, the following code will be written:-
    E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
    Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done – otherwise, the new custom subscreen will not be displayed in the Asset master screens.
    Development
    Creating a Project to include the enhancement
    Go to transaction CMOD and create a project.
    Enter a description for the project. Then, click on the pushbutton ‘Enhancement Assignments’ in the Application Toolbar.
    Enter the name of the enhancement and Save.
    Go to ‘Components’.
    Creating Custom Include for ANLU
    The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
    Create the include structure with three new fields, as required. Then, save and activate it.
    Develop the subscreen and the program
    Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
    Create it as subscreen.
    Then, go to the Layout of the screen and create three new fields from Database table ANLU.
    Drag the fields in the screen body and place them.
    Then, save and activate the screen and come back to screen flow editor.
    Create the PAI module to add validation for field “Location 2”, as required .
    Activate the whole function group and come out.
    Write code in the Function Exits to synchronize the programs
    Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
    Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
    Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
    Then, activate everything – the whole project and come out.
    Complete the configuration to link the subscreen
    The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
    Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
    Here, the requirement is to create these three custom fields in the tab page ‘General’ of asset master screen ( AS01/AS02/AS03/AS91).
    Determine the Layout
    To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class ‘1000’ and click on folder ‘General Assignment of Layout’.
    Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout ‘SAP’ cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
    Create new tab layout
    Go to transaction AOLA. Copy the tab layout ‘SAP’ to create another layout, say, YSUB.
    System will copy all the settings and will inform you about that.
    Select your newly created layout and double-click on the folder ‘Tab page titles’.
    You want to put your custom fields in the tab page “General”. So, select this tab page entry and double-click on the folder "Position of Groups".
    Here, all the field groups currently residing in the tab-page “General” are shown. Add an entry for your newly created fields.
    Select the group box from the list. An entry will come with “U” padded with the custom subscreen prepared by you.
    Then, save and come out.
    Assign the new Layout to Asset Class
    Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
    Save and come out.
    Test the Exit
    Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to them…save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
    Original Source: ittoolbox.com
    User Exits:
    User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    To find a Exit.
    Goto Transaction -- Find The Package
    SMOD >f4>Use the Package here to Find the Exits In the Package.
    Else if you Want to search by Application Area wise ,
    There is one more tab to find the Exits in the Respective Application Area.
    Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
    Now Run ur Transaction to Check if it Triggers.
    Thats it..
    Suppose you need to find out all the user exits related to a tcode.
    1. Execute the Tcode.
    2. Open the SAP program.
    3. Get the Development Class.
    4. Execute Tcode SE84.
    5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
    6. Enter the Development class and execute.
    Check out this thread..
    The specified item was not found.
    1. Type the transaction : system->status-> <PROG. NAME>
    2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
    3. Open CMOD utilities->SAP enhancements
    EDIT->All selections
    4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
    5. The displayed list contains the enhancements names for the transaction You were looking for.
    6. Create a project in CMOD and the code in default include->activate.
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    User-Exits
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/ab038.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
    These links will help you to learn more on user exits.
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.allsaplinks.com/user_exit.html
    www.sap-img.com/abap/what-is-user-exits.htm
    Also please check these threads for more details about user exits.
    Re: Screen exit
    user exit and customer exit
    user exit
    1. Document on UserExits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    2. Finding User Exits...
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
    3. List of all User Exits...
    http://www.planetsap.com/userexit_main_page.htm
    Reward if found helpfull,
    Cheers,
    Chaitanya.

  • Someone has a tutorial for creating screen exit?

    I have a development and I do not know how to create screen exit.
    Case Someone has a tutorial for creating screen exit please help me
    Thank you
    <b><i>Wagner Duarte
    Consultant - SAP ABAP</i></b>

    hI
    Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
    1. Go to the screen>System>Status-->Program (Double
    click this program. It will take you to the program.
    2. Now, Goto-->Object Directory Entry.
    3. Make a note the package name.
    4. Now run the transactions SMOD, press F4 and enter the
    above noted package, press enter.
    5. It will display list of Exits.
    6. Now go back to the initial screen SMOD.
    7. Specify the exit name here and select the radio button
    Components.
    8. It will display four group boxes one for FM, second
    for Fcodes, thrid for Screen areas and last for
    includes.
    9. Goto transaction CMOD, create a new project, and
    click the button "Enhancement assignments" and
    specify your enhancements that you got in SMOD.
    10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
    Have a look at below link It will definately help you to undestand the same.
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    check these links.
    http://help.sap.com/saphelp_46c/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
    http://www.allsaplinks.com/screen_exit.html
    USER EXITS
    https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=312792
    https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=1320078
    https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=2669896
    How to implement screen exit for a SAP standard transaction
    Introduction
    SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
    To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
    To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
    An append structure in the database table with the new fields.
    A subscreen area into the standard screen – where the programmer can attach his subscreen of his own program with the new fields.
    A function group under which the new subscreen has to be created with the new fields.
    Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen – so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
    Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
    Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
    Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
    Pre-Requisites
    The developer to work on screen exit should have essential knowledge on the following:
    DDIC concepts, including the knowledge of append structure.
    Concept of SAP Enhancements and implementing them using Projects.
    Concept of function exits.
    Knowledge on Module Pool – including subscreens, Tabstrip controls etc.
    Steps
    Guidelines
    So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
    Find out the Required Enhancements
    Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton ‘SAP Applications’. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest – for e.g., Purchasing, Asset Accounting, etc.
    Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
    Utilize the Enhancement in a Project
    After you have found one, do as directed in the documentation. Generally, the steps are as follows:
    Create a project using CMOD including your enhancement.
    Create the append structure with new fields.
    Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
    Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
    Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
    Activate the project.
    Test to ensure that required functionality are met.
    Case Study 1
    Add three new custom fields for Asset master and maintain information for them
    Requirement
    Three fields in the legacy system have to be maintained in Asset master. These fields are:
    Original Asset number – 20 characters
    Location 2 – 15 Characters.
    Model no – 20 characters
    Location 2 should start with ‘L’.
    Pre-Analysis
    Finding out the Enhancement
    As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
    Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
    Studying the Function Exits
    The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
    EXIT_SAPLAIST_002
    Function module Level Documentation
    This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
    Import Parameters
    Understanding
    This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
    EXIT_SAPLAIST_003
    Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
    Understanding
    This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
    Studying the Documentation of the Enhancement
    The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
    Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
    Deciding the Final course of Action
    After making all the investigations, the final course of action was determined.
    SrlNo Step Justification
    A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
    Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
    A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be ‘CUST’ (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
    In the PAI of the subscreen, validation for Location to start with ‘L’ will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_002’, the following code will be written:-
    ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_003’, the following code will be written:-
    E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
    Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done – otherwise, the new custom subscreen will not be displayed in the Asset master screens.
    Development
    Creating a Project to include the enhancement
    Go to transaction CMOD and create a project.
    Enter a description for the project. Then, click on the pushbutton ‘Enhancement Assignments’ in the Application Toolbar.
    Enter the name of the enhancement and Save.
    Go to ‘Components’.
    Creating Custom Include for ANLU
    The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
    Create the include structure with three new fields, as required. Then, save and activate it.
    Develop the subscreen and the program
    Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
    Create it as subscreen.
    Then, go to the Layout of the screen and create three new fields from Database table ANLU.
    Drag the fields in the screen body and place them.
    Then, save and activate the screen and come back to screen flow editor.
    Create the PAI module to add validation for field “Location 2”, as required .
    Activate the whole function group and come out.
    Write code in the Function Exits to synchronize the programs
    Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
    Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
    Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
    Then, activate everything – the whole project and come out.
    Complete the configuration to link the subscreen
    The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
    Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
    Here, the requirement is to create these three custom fields in the tab page ‘General’ of asset master screen ( AS01/AS02/AS03/AS91).
    Determine the Layout
    To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class ‘1000’ and click on folder ‘General Assignment of Layout’.
    Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout ‘SAP’ cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
    Create new tab layout
    Go to transaction AOLA. Copy the tab layout ‘SAP’ to create another layout, say, YSUB.
    System will copy all the settings and will inform you about that.
    Select your newly created layout and double-click on the folder ‘Tab page titles’.
    You want to put your custom fields in the tab page “General”. So, select this tab page entry and double-click on the folder "Position of Groups".
    Here, all the field groups currently residing in the tab-page “General” are shown. Add an entry for your newly created fields.
    Select the group box from the list. An entry will come with “U” padded with the custom subscreen prepared by you.
    Then, save and come out.
    Assign the new Layout to Asset Class
    Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
    Save and come out.
    Test the Exit
    Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to them…save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
    Original Source: ittoolbox.com
    Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
    1. Go to the screen>System>Status-->Program (Double
    click this program. It will take you to the program.
    2. Now, Goto-->Object Directory Entry.
    3. Make a note the package name.
    4. Now run the transactions SMOD, press F4 and enter the
    above noted package, press enter.
    5. It will display list of Exits.
    6. Now go back to the initial screen SMOD.
    7. Specify the exit name here and select the radio button
    Components.
    8. It will display four group boxes one for FM, second
    for Fcodes, thrid for Screen areas and last for
    includes.
    9. Goto transaction CMOD, create a new project, and
    click the button "Enhancement assignments" and
    specify your enhancements that you got in SMOD.
    10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
    and you just go through these links also
    Screen exit
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    screen-exits
    Check the following link.
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=how%20to%20find%20screen%20exits&cat=sdn_all

  • When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
    Message Edited by bleakreserve on 02-3-2005 06:34 AM

  • My iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
    There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
    Regards.

  • Where are the Touch Screen Drivers for HP Pavilion TouchSmart Notebook PC

    I have a HP Pavilion 15-n210dx TouchSmart Notebook PC (ENERGY STAR)                                                                     
    Need the Touch Screen Drivers, where are they?
    This question was solved.
    View Solution.

    Thank you for your quick response.
    None of the offerred solutions work, please see screen captures.
    First Screen Capture: Computer does not recognize that a TouchScreen is an active device. [This indicates a driver is damaged and/or missing]
    Second Screen Capture: There are no Tablet PC Settings available. [This confirms that the driver is missing]
    HP needs to upload TouchScreen Drivers to its' support downloads immediately.

Maybe you are looking for