Touch Screen Support for OS X

Hi,
I am fairly new to OS X, recently making the jump from Windows.
And I haven't looked back and don't think I will!
I have come across quite a few problems during the transition when it comes to hardware, but usually it came down to my error with configurations.
I am struggling with one issues and hoping someone in the apple community has overcome this and can maybe share the knowledge?
Here goes:
I have an AOC e2239Fwt multi touch monitor, works exceptionally well for a cheap touch screen with windows 7.
However it hardly fuctions at all with MAC OS X, I have tried numerous touch screen device drivers with a glimmer of hope it may make mine function correctly.
But they didn't, I have tried imtouchbridge, eol and 3m drivers non of which have worked!
It recognises its a touch screen but I have to put 2 fingers on it to show the mouse cursor, but then its as if I have left click held down and it also is about 2 inches away from any of my fingers!
If anyone can help it would be massively appreciated and if you can't, thank you for taking your time to read and consider.
Thanks in advance
Paul

unfortunately, the two drivers above are basically the same TPMon TouchKit drivers. I have used these with a resistive screen I had but the AOC doesn't appear to like them.
Running parallels, the drivers from the AOC site are working perfectly. unfortunately i haven't been able to callibrate the screen as of yet so that is a little annoying but it isn't far off.
In Mac os i am yet to find any useful drivers.  I did read on one site that touch-base have some drivers that can handle the AOC but they charge £180 for a single license and i dont know if i can justify that for the gimic of touch screen in mac.
of course, if anyone out there knows of a similar driver to the touch-base one i would be only too happy to try it. i believe the have a gesture recognition package that can be run along side the driver to open up a few more features.
sorry this isn't particularly helpful but hopefully it opens a few doors to ideas in people.
I'm keen to see how this all turns out and if anyone manages to get the monitor running.

Similar Messages

  • Hello,Where in Singapore can I get a LCD display and touch screen digitizer for a iphone 2g.

    Hi there,Where in Singapore can I get a LCD display and touch screen digitizer for a iphone 2g.

    Try searching google.

  • Where are the Touch Screen Drivers for HP Pavilion TouchSmart Notebook PC

    I have a HP Pavilion 15-n210dx TouchSmart Notebook PC (ENERGY STAR)                                                                     
    Need the Touch Screen Drivers, where are they?
    This question was solved.
    View Solution.

    Thank you for your quick response.
    None of the offerred solutions work, please see screen captures.
    First Screen Capture: Computer does not recognize that a TouchScreen is an active device. [This indicates a driver is damaged and/or missing]
    Second Screen Capture: There are no Tablet PC Settings available. [This confirms that the driver is missing]
    HP needs to upload TouchScreen Drivers to its' support downloads immediately.

  • Touch Screen Icons for dzen2

    Hey guys,
    touch screens are more and more prominent in the modern computing world so I'm looking for ideas and scripts to make them useful with dzen2.
    As you might know dzen2 (SVN) does support stackable, clickable areas using the ^ca() command. That way it's extremly easy to create simple
    touch bars that will launch any command you could think of, e.g.:
    echo '^ca(1,uzbl-browser)^bg(blue)^i(/path/to/uzbl.xpm)UZBL^ca()\
    ^ca(1,xterm -e mc)^ca(2,pcmanfm)^bg(green)^i(/path/to/filemanager.xpm)Files^ca()^ca()'\
    | dzen2 -p
    The above code will create a simple dzen bar with two items, Uzbl and Files, when clicking with the left mouse button into the former it will spawn uzbl.
    While the latter will either launch mc when cliked with the left button or pcmanfm when clicked with the middle button.
    So what I'm looking for is icons suitable for touch screen use and ideas on how to integrate dzen2 into touch scenarios.
    Some already available custom icon packs can be seen here:  Dzen icon packs
    Thanks for your attention, Rob.
    Last edited by gotmor (2010-09-06 21:16:47)

    Have you tried your good friend Google?
    I found this during a quick search: Add-On Touch Screens
    I am sure there are plenty of companies that make such devices, the only concern being that it is both Mac-compatible and of a desirable color.
    Luck-
    -DP

  • Touch screen support (no context menu)?

    Happy to see this, but how are touch screen devices (that don't have a right-click) being supported? Even though people might not type that much on touch screen devices, they do make more mistakes *if* they have to type on them, so some easy typo correction is even more essential.

    Thanks for your feedback.  I would like to clarify that currently the SpellUI feature is very limited, lots of improvement to be done. However, currently If you need to support touch screen or other advanced UI features, you can create your own UI components and utilize the SpellChecker class.

  • Where can I buy a touch screen digitizer for hp?

    Hi
    I have hp laptop with following properties:
    Natural Silver 15.6" ENVY TouchSmart 15-j023cl Laptop PC with
    AMD Elite Quad-Core A10-5750M Accelerated Processor, 8GB Memory,
    Touchscren, 1TB Hard Drive and Windows 8.
    Recently, my touch screen digitizer has broken and I had such a hard time to work with my laptop. I want to replace my broken digitizer by the new one, but unfortunately I couldn't find any web site providing me a link to buy a digitizer, although I searched a lot. 
    So, I just wanted to know if there is anyone here knows how to buy a digitizer for Natural Silver 15.6" ENVY TouchSmart 15-j023cl Laptop?
    Thanks 

    Hi,
    You can buy from the following Part store:
       http://partsurfer.hp.com/Search.aspx?SearchText=E0M24UA
    Or using part number (Display, item #1) and buy elsewhere.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Touch screen support?

    Probably a stupid question, but I recently picked up an acer W500, and while the beta works fine using the nub or a mouse, it defaults to the hand tool whenever I try using the touch screen. As in the tool I had selected changes to the hand when I touch the screen and back again when I release. Is there a setting I'm missing, or will it just not work with a touch screen?

    Actually no question is stupid - forums are the best way to find the answers to problems that are driving you nuts.  :-)  I'm not familiar with Acer but try checking your touch settings for the tablet.  I have the Intuos 5 touch and it is working just fine with the CS6 Beta.  Does your touch tablet work with other applications?  Do you have your brush tools set for your tablet?
    Terri

  • Handling Touch Screen Events for Sony Ericsson P990i Phone

    Hello all,
    i recently just learned Java and i am trying to develop a GUI for a phone - P990i. I was wondering how i can handle touch screen events. Are there APIs for that or is it just a mouse event?
    Any help is very much appreciated.
    Thank you.

    Hello all,
    i recently just learned Java and i am trying to
    develop a GUI for a phone - P990i. I was wondering
    how i can handle touch screen events. Are there APIs
    for that or is it just a mouse event?
    Any help is very much appreciated.
    Thank you.Hi there,
    Have you found an answer for this question?
    Thanks.
    Tim

  • Touch Screen Retrofit for iMac9,1 Screens

    I am currently conducting research on virtual organs using the Hauptwerk/Classic MIDIworks systems. These are heavily dependent on touch screens. According to Darryl Wood of Classic MIDIworks " . . . there are a lot of switches inherent in organs. There's no way to implement that many physical switches, multiplied by all the different sample sets, practically or economically." This is why touch screens are recommended. That is to forgo the expense of independent drawknobs ($25 to $50 each) to say nothing of all the pistons, couplers, swell shoe displays and memory level displays that would cause a $7,000 organ project to drastically escalate in cost. I have found a retrofit in the form of the 3M MicroTouch System 3250EX. This is a surface capacitive touch system based on the 3M MicroTouch Controller EX and optimized for displays ranging from 6.4 to 32 inches.
    If you do not recommend the 3M system, please send a list of touch screens and necessary connection hardware.

    Hi @Bobi617 ,
    Welcome to the English HP Consumer Forums!
    Please feel free to post a revised message in English.
    I understand you are having issues after a possible update on your HP Notebook and your touchscreen not responding. You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
    When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
    Here is a document on troubleshooting the Touchscreen if the system restore does not help.
    Thank you, and have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Touch screen overlay for iMac G5

    All,
    Does anyone know ofa source where I can get a touchscren overlaythat is compatible with OSX? I was thinking of installing a touch screen overlay on my iMac G5. That could be quite fancy.
    I suspect people have already done so. I am having troubl finding a source for touch screen overlays plus the required software.
    Anyone who can help?

    Have you tried your good friend Google?
    I found this during a quick search: Add-On Touch Screens
    I am sure there are plenty of companies that make such devices, the only concern being that it is both Mac-compatible and of a desirable color.
    Luck-
    -DP

  • Touch screen problem for Pro Slate 8

    Hi  I have got my new pro Slate 8 recently and I found I can't control the touch screen when it placed flat, I could only use it again when I take the tablet up with an angle. How could I solve the problem?Thx

    Hey , Welcome to the HP forums. -Are you using Windows 8.1 on your tablet or did you upgrade to Windows 10?-Did this issue start right out of the box?-What have you tried to resolve the issue so far? Can you please confirm the product number for your tablet or the full model number? Thanks.

  • Is there any way to get touch screen working for unit that got wet?

    i recently had my ipod touch fall in water for a few seconds, and since then my touch screen will light up dimly, but is unresponsive.  the unit works for sync on my computer, as well as playing on my bose sound dock.  only the touch screen seems affected

    If the liquid damage has occurred recently you should try to dry it completely before attempting to use it. Have you tried putting the iPod Touch into a bag/bowl of uncooked white rice? That would help to pull all the remaining liquid out of the iPod.
    If, after that the iPod's screen is still not responsive then it's something you may need to have repaired or replaced.

  • The touch screen buttons for arent working

    on my iphone the buttong for wifi isnt working i turned my phone on and off a lot and it still isnt working and its the only button that isnt working. I keep trying to push it over on the screen but i have no idea why it isnt working and i can turn all my other buttons on and off just not the wifi.

    Hi there keakiakool,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    -Griff W.

  • What is the best touch screen computer for Photoshop

    I want a touchscreen computer/ tablet / detechable  with windoes 8 - and I want to run Photoshop and Illustrator.
    Any suggestions for a computer type. Under 800. I% or 3/ musthave hdmi/
    I ask as I see or read that people are having a lot of problems with downloading cloud or using a stylus with Photoshop.

    Start here to see what screens have Mac drivers.
    http://www.touch-base.com/

  • Can you get your ipod touch screen fixed for free if its the first time that is broke?

    my friend broke her ipod screen and she took it into apple and they fixed it for free so can i get my fixed for free.

    If someone breaks part of their device (intentionally or otherwise) it is not covered by the 1 year warranty so I'm not sure why she would have had it fixed for free.
    If you are interested in finding out repair pricing make an appointment with a Mac Genius at an Apple store or contact AppleCare via phone.
    Cheers.

Maybe you are looking for