Touch screen support?

Probably a stupid question, but I recently picked up an acer W500, and while the beta works fine using the nub or a mouse, it defaults to the hand tool whenever I try using the touch screen. As in the tool I had selected changes to the hand when I touch the screen and back again when I release. Is there a setting I'm missing, or will it just not work with a touch screen?

Actually no question is stupid - forums are the best way to find the answers to problems that are driving you nuts.  :-)  I'm not familiar with Acer but try checking your touch settings for the tablet.  I have the Intuos 5 touch and it is working just fine with the CS6 Beta.  Does your touch tablet work with other applications?  Do you have your brush tools set for your tablet?
Terri

Similar Messages

  • Touch screen support (no context menu)?

    Happy to see this, but how are touch screen devices (that don't have a right-click) being supported? Even though people might not type that much on touch screen devices, they do make more mistakes *if* they have to type on them, so some easy typo correction is even more essential.

    Thanks for your feedback.  I would like to clarify that currently the SpellUI feature is very limited, lots of improvement to be done. However, currently If you need to support touch screen or other advanced UI features, you can create your own UI components and utilize the SpellChecker class.

  • Touch Screen Support for OS X

    Hi,
    I am fairly new to OS X, recently making the jump from Windows.
    And I haven't looked back and don't think I will!
    I have come across quite a few problems during the transition when it comes to hardware, but usually it came down to my error with configurations.
    I am struggling with one issues and hoping someone in the apple community has overcome this and can maybe share the knowledge?
    Here goes:
    I have an AOC e2239Fwt multi touch monitor, works exceptionally well for a cheap touch screen with windows 7.
    However it hardly fuctions at all with MAC OS X, I have tried numerous touch screen device drivers with a glimmer of hope it may make mine function correctly.
    But they didn't, I have tried imtouchbridge, eol and 3m drivers non of which have worked!
    It recognises its a touch screen but I have to put 2 fingers on it to show the mouse cursor, but then its as if I have left click held down and it also is about 2 inches away from any of my fingers!
    If anyone can help it would be massively appreciated and if you can't, thank you for taking your time to read and consider.
    Thanks in advance
    Paul

    unfortunately, the two drivers above are basically the same TPMon TouchKit drivers. I have used these with a resistive screen I had but the AOC doesn't appear to like them.
    Running parallels, the drivers from the AOC site are working perfectly. unfortunately i haven't been able to callibrate the screen as of yet so that is a little annoying but it isn't far off.
    In Mac os i am yet to find any useful drivers.  I did read on one site that touch-base have some drivers that can handle the AOC but they charge £180 for a single license and i dont know if i can justify that for the gimic of touch screen in mac.
    of course, if anyone out there knows of a similar driver to the touch-base one i would be only too happy to try it. i believe the have a gesture recognition package that can be run along side the driver to open up a few more features.
    sorry this isn't particularly helpful but hopefully it opens a few doors to ideas in people.
    I'm keen to see how this all turns out and if anyone manages to get the monitor running.

  • Phone that supports location JSR, JSR179, and touch screen

    Hi All
    Does anyone know which phones that have touch screens support the location jsr (JSR179) ?
    Regards
    Steve

    If this case is blocking or partially blocking the iPhone's proximity sensor, sure you can use it but this problem will remain.
    If so, you can try increasing the size of the case opening around the earpiece - the sensor is located above and there is also a light sensor beside it which combined are wider than the earpiece opening or purchase another case that is better designed for the iPhone in this regard.

  • I love the new touch screen features!

    I just wanted to say that whomever added the new touch screen features to Illustrator CC is AWESOME!  Very cool!  Great work!  Touch type tool, free transform, multi-touch zoom/panning... very nice!
    I like it so much I made a video: http://youtu.be/ZKhifrhMmNg?t=4m13s
    (and also showed some touch screen support in a few other Adobe CC programs.)
    Hope to see more of that kind of innovation.

    Gorgeous.
    Some people may not be able to enjoy that great enhancement due to some controversy when it comes to buy (not rent) that piece of software.

  • Touch screen configuration options for Windows 8.1

    Which kind of configuration options are available for the following:
    PC configuration:
      MSI-GeForce-GTX-750-Ti in PCIex16_1
       ~ DVI-D free
       ~ VGA free
       ~ HDMI connectd to Samsung 24" monitor
      NVIDIA Quadro FX 1800 in PCIex16_2
       ~ DisplayPort connected to Samsung 24" monitor
       ~ DVI-D port free
    Scenario options(?):
    1) medium (21.5") touch screen is used mainly as GUI for command & control
        and two digital displays are used for content  
       a) USB 2.0 is fast enough for  touch screen i.e. USB 3.0 not needed 
       b) touch sreen connected to NVIDIA Quadro FX 1800's DVI-D port
    2)  medium (21.5") touch screen both as display and touch screen
       a) MSI-GeForce-GTX-750-Ti card HDMI-port connected to touch screen
           (DVI-D port to Samsung 24")
    3) small touch screen supported by Windows 8.1
      a) Intuos Pro Pen & Touch Small
    https://store.wacom.com/us/ ?  
      - is the industry standard the Microsoft Ink API or the Wacom Wintab API ?
    4) Microsoft/Nokia smart phone/tablet device as touch screen to Windows 8.1
      a) remote connection to Windows 8.1
    Other options ?

    4) can one use any Microsoft/Nokia smart phone/table device as touch screen to Windows 8.1 ?
    Can you install Remote Desktop Connection on that?  Another related tool which would be worth looking at is TeamViewer...
    http://www.teamviewer.com/en/download/mobile.aspx
    Robert Aldwinckle

  • Directory structure support and sluggish touch screen

    I bought a Zen X Fi2. My expectations were high since I already had a creative some years ago. (I was quite pleased with the performance and sound quality etc)
    However I am a bit dissapointed with Zen XFi2- The touch screen is not very successful. The scroll function does not work at a satisfactory level and sometimes (when I want to scroll), it makes a "selection" rather than "scrolling".
    Also it does not support browsing with directory structure. For those people (like me) who are quite used to drag and drop type of copying for mp3 files, it is really a pain to re arrange all the songs for ID3 tag information.
    I believe these two issues are software issues and can be improved by new firmware upgrade.
    I also want to take this opportunity to tell that the software (interface software) that comes with the device is totally crap- I have never seen a software that tries to control the user rather than the user controlling the software. An ideal interface software for such a device should be the one which allows user to choose the songs from any directory, drag and drop into the device.
    I was going to return my Zen however after playing around for a few days, I somewhat get used to its sluggish touch screen behaviour and accepted ID3 tag browsing (which still gives me a lot of problem) so right now I am gonna keep it.
    May be software developpers can work on touch screen improvement, adding the support for directory structure browsing (as well as ID3 tag browser) and work on interface software a bit more ?
    Thanks
    Best Regards

    This is indeed interesting because when you say "I don't have the problems you mentioned" I believe you also refer to the sensitivity of the touch screen. This makes me ask the question if my item has some problems. Since I do not have any means of cross checking this (apparently there is no other Zen XFi2 around me) may be I should ask you this question: "When you want to browse among albums for example, you wipe your finger across the screen so the screen rolls down; can you have it fluently like in an IPOD touch?- or does it not recognize immediately and you have to do it again sometimes?"
    As for the volume button- I do indeed agree. For devices like this one; having physical buttons for at least volume, mute, stop/pause is a "must"! Choosing, browsing or starting a song is not a big deal however muting, stopping or changing the volume may be needed instantly from time to time. It is very unpractical to browse for volume, find it and adjust it!
    Also may I add that for such a nice device, there should be a remote control on the headphone/earphone cable and should employ at least stop/play/mute/volume/forward/reverse buttons. I mean think about it for a while- why would you want to take use this device- apparently not to watch movies at home! You take it with you and listen to music, while cycling, jogging, skiing, roller blading etc. It is so difficult taking out the device from your pocket, browsing for volume button and turning up and down the volume (while cycling for example!) or skipping to next song with one touch!
    Cheers

  • Support for Multiple Multi-Touch Screens

    hello,
    I have written some code that implements the multi-touch and it has been working fine with just one multi-touch screen.  However, someone using my program with 2 multi-touch screens hooked up is getting no input from the second device.  I did not
    see anything documentation referring to more than one multi-touch device, although the existence of hSource in the TOUCHINPUT structure would imply multiple devices are supported.  After searching the forums, I found this post
    http://social.msdn.microsoft.com/Forums/en-US/tabletandtouch/thread/9c11871d-945c-4f7b-bdaa-a1b1452959b8/
    in which someone stated that 2 multi-touch monitors should work fine, but not with simultaneous input.  Since the post is almost 2 years old, I am wondering if anything has changed, and whether this might be the problem my user is having.  Or is
    there some way to tell if it is a driver issue?  I am not using the gesture library, just retrieving data with GetTouchInputInfo.  I'll appreciate if anybody can point me to documentation or mention their experiences with multiple devices.
    thank you.

    thank you for your quick reply.  I have gotten a few more details and the problem is not the scenario you suspected.  They are using 1 window spanning 2 multi-touch monitors.  The problem does seem to be related to simultaneous input.  If
    they have a finger down on the first monitor, my program does not receive any events from the second monitor.  If they are not pressing down on the first monitor, the input from the second monitor comes through.
    Does Windows 7 support simultaneous input from 2 or more multi-touch monitors?  Is there something I have to do so that my program will work correctly?  Or are there driver specific issues, and if so, where can I get help for that?
    thank you.

  • Touch Screen defective - NO Support!!

    I have had an iphone for just over a year and this is my third one. Apple replaced the first two for a crack on the back case, advising it to be a flaw in the case. Now I have a touch screen issue, but I would not call it a dead spot like Apple states. Apple also said it was a hardware issue. The issue is that the screen work with some apps but not on the home screen or the keypad. When I stated having this issue I looked up and saw that this is more common then Apple let on. I was happy with the iphone till this happened and I was told to just buy a new iphone. I am extremely dissatisfied with the support and customer service Apple has displayed on what clearly is a defect. Toyota has taking care of their customers. I would like to here from others in my situation. I am sure that Apple will remove this post so I may be starting a new Facebook group for this topic.

    If no change after restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, more than likely there is a hardware problem. With a hardware failure, it can be a partial or complete failure.
    If this were a problem specifically with Apple software on the iPhone only, then the overwhelming majority of iPhone users or all iPhone users running the same firmware version would be experiencing the same, which is not the case.
    Your iPhone has a hardware problem as already stated by Apple and you have been provided the options for getting it fixed - via a 3rd party repair service, or making use of Apple's out of warranty or not covered under the warranty "repair" price, which pays for an exchange for the same model at a discounted price. If this isn't acceptable, use the money to purchase another phone instead.
    Message was edited by: Allan Sampson

  • Cisco 340 (Edge) DMP can support ELO 3209L Touch Screen

    Hi Cisco Expert,
    Could you help to check ELO 3209L Touch Screen, i'd like to use this screen in our Digital Signs Systems (AppSpace 5. and 340 DMP), but i'm not sure about 340 DMP which can support 3209L or not, some screen model from cisco website.
    ELO Interactive Digital Signage Display
    including 4201L, 5501L, and 7001L.
    ELO Desktop Touchmonitor including 1715L,
    1515L, 1519L, 1919L, 2201L, 1940L, 2243L,
    2244L, and 3201L.
    ET4201L-CUWA-0-MT-GY-G, SY-4210H
    Anytouch WTM320T
    Dell ST2220Tc
    NEC V463-TM,V423-TM
    Thanks&Rgds.

  • Support code 1600, touch screen not working

    The 1600 support code popped up to tell me that two of my ink cartridges are low, but it won't let me do anything else. The touch screen seems to have stopped working. Also, is there any way I can change settings so that certain documents are printed in black and white only? 

    Hello.
    The 1600 error indicates that one or more of the ink tanks are empty.
    Please replace the empty ink tank in order to resume operation.
    Unfortunately, the empty color tank would have to be replaced even though you will be printing a black and white document.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Does elements 13 support win8 touch screen?

    Is touch screen fully supported in 13? Currently using 11.

    Darryl
    Yes.
    Please see my comments in your other thread.
    elements 13 wont open raw files from Nikon d750
    Thank you.
    ATR

  • Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

    Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

    IakovM,
    See below for a few links.
    You should ask the people at Troll Touch if the have a software to create a user interface.
    Usually, the maker will provide programmers with the programming codes and a interface guide line on how to program the different gestures.
    I know that PQLabs as a SDK for their touch screens.
    With the programming codes in hand, any good Flash or HTML 5 programmer can setup a web site that will take advantage of the touch screen.
    One thing I can tell you is that with touch screens based web sites, when it comes to links or buttons to push,everything needs to be bigger than on a standard web site. People will be using their fingers to do the clicking.
    A finger is a much bigger pointer than a mouse pointer!
    So links or buttons that are too small or to close to screen edges will be hard to click.
    You can look at these for possible solutions:
    TUIO is an open framework that defines a common protocol and API for tangible multitouch surfaces.
    http://www.tuio.org/
    http://kivy.org/#home
    http://www.touchuserinterface.com/2009/06/multi-touch-programming-for-python-and .html

  • Hp model 15-r033tx will support touch screen or not

    Dear sir,
       I  have a doubt   hp  model 15-r033tx will support touch screen or not .  please  clarify    mention subject
    Regards
    Senthil
    [email protected]

    Hi,
    Model HP 15-r033tx does not have touch screen. You need Touchsmart models or Envy models.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • 6th generation nano screen black but able to touch screen from memory to get music to play..called customer support they said it's the backlight since touch screen can still be touched and music can be played..any thoughts?

    second 6th generation nano..again with the same problem..screen is black will not turn on but am able to touch screen and get music/radio to play...able to touch around on screen from memory..nano is recognized in itunes and computer..but screen will not turn on..called customer support today..of course out of warranty but was told that it sounds like my backlight is burnt out and that's all i need fixed, told that it shouldn't be that expensive (live in myrtle beach SC) and that my screen is fine since i am able to touch around on it...any thoughts?
    thanks to all for any advice or input..will try to take to local icitymac store in next couple of days
    jenn

    Replacing the backlight usually requires replacing the entire front LCD/digitizer.  And yes, it sounds the backlight has burned out.
    Keep in mind that if you go the Apple route, they won't actually repair the iPod, but instead will do an out of warranty exchange meaning your current Nano will be replaced with a refurbished model of the same capacity and generation.
    B-rock

Maybe you are looking for