Touch screen vibration.

The touch screen vibration of Nokia C6-00 is very high when if it is always in level 1. I checked all Nokia C6-00. But i can see the same thing. Other touch screen phones have good smooth and low touch screen vibration. I search somany softwares to control this problem. But cant find anything. Any solution do u hav for this?

Hi JashiNlk,
Thank you for your post and welcome to the forums!
Unfortunately vibration intensity can be only set in the settings and if the lowest setting is still too high for you, there is no option but to completely switch it off or just endure it.  Also, as far as I am aware, there is no application that would allow you to change the vibration intensity "low level" features such as this. One possible solution would be to get a case and a screen protector for your phone, it may dampen the vibration a bit.
Let us know how you get on,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Similar Messages

  • Touch Screen Vibration broken after updating to th...

    I just updated the firmware on my 5230, and I've noticed that it messed-up the Touch Screen Vibration setting, Level 2 & 3 work properly, but Level 1 is now the same as Level 3...

    Type *#7370# and the phone's lock code (Nokia default lock code is 12345). Note that this code will wipe your phone & mass memory. So, backup first.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • HT4623 Why do the words, graphics, etc on my 4s screen vibrate when I touch it? I powered it off thinking it was a glitch but it continues

    Why do the words, graphics, etc on my 4s screen vibrate when I touch it? I powered it off thinking it was a glitch but it continues to happen. It just started out of the blue

    I think I have found the source of my problem detailed above. Apparently, there have been problems with Preview running on OS Mavericks, dating back to October 2013, which Apple has yet to acknowledge or address. Many have had similar problems with photo images loading very slowly to the point of making Preview unuseable.
    It may also explain problems I have had with flash drives and hard drives that ran on my Mac Book Pro under Lion no longer working  since upgrading to Mavericks. I found other postings on these issues.
    It is a shame that I have to resort to Google as the best source to identify problems with my Mac and possible solutions. In many cases, it directs me to the source on Apple Support, which is difficult to find when one attempts a search via Apple Support. This could use some improvement.
    I am new to using community support sites and Apple does not seem  to provide simple, clear directions  on how to get started. Jumping in with both feet, not only did I get wet, but I apparently "splashed" someone, as I got a hostile response from another community member on the first issue ever posted. I never did get an answer to the problem, though. I hope some find these comments helpful.
    Oh, and wake up, Apple. We all would hope you monitor and glean information from these postings and act promptly to remedy problems with OS Mavericks.
    Message was edited by: MikeMacBP2011

  • JME support for touch screen and vibration

    Hi all, How are you?
    I need to develop a application for mobile phone, and it is going to use the mobile touch screen and vibration features.
    Does somebody know if there is an JME API, or JSR that provides access/control to Mobile's touch screen and vibration features?
    Does somebody know if it is feasible to do it using JME?
    I appreciate any help you can give,
    thanks in advance,
    Roger

    to use the mobile touch screen javax.microedition.lcdui.Canvas methods
    -- hasPointerEvents()
    -- hasPointerMotionEvents()
    -- pointerDragged(int x, int y)
    -- pointerPressed(int x, int y)
    -- pointerReleased(int x, int y)
    and vibration features?javax.microedition.lcdui.Display method
    -- vibrate(int duration)
    Also see proprietary vibration etc. APIs for Nokia / SonyEricsson:
    {color:#0000ff}http://www.wmlscript.it/j2me/nokia-UI-API-v11/com/nokia/mid/ui/DeviceControl.html
    http://developer.sonyericsson.com/entry.jspa?externalID=108&categoryID=12{color}
    db

  • I have an Iphone 4 with IOS 6 and my emails have disappeared.  I also have a very slow reaction time to my touch screen.

    I have an Iphone 4 with IOS 6 and my emails have disappeared.  I also have a very slow reaction time to my touch screen. Help!

    Hello there, parihargs1.
    To troubleshoot display brightness issues the following article provides 2 key steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Of note is the following:
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Display does not adjust brightness automatically
    The ambient light sensor brightens the display when using the iPhone in brightly lit environments, and dims the display in low light. To test this sensor, do the following:
    If the iPhone is in a protective case, remove it from the case. If there is a protective film on the display, remove the film.
    Verify that the Auto-Brightness setting (Settings > Brightness and Wallpaper) is set to ON, and that the Brightness level is set near the middle of the slider.
    Press the Home button to return to the Home screen and then press the Sleep/Wake button to lock the iPhone.
    In a bright environment, cover the top third of the iPhone to block the light, then press the Sleep/Wake button or the Home button to wake the phone. Slide the slider to unlock the phone.
    Notice the brightness of the screen and application icons; they should be somewhat dimmed.
    Remove the cover from the top of the display and in a few moments the display should get brighter.
    If these steps do not resolve your issue please refer to the "Issue not resolved" section for your next step.
    Thansk for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • 5800 touch screen problem

    I have this phone from six months.
    It is having touch screen problems since a few days.
    like for eg. When I tap the message icon it opens gallery,The touch seems to be on right side wherever I tap or touch.The phone then when it gets restarted works fine.
    Touch screen calibration does not seem to work and I have the latest firmware update too.
    Please help.
    Thanks

    Had my 5800 for a few months now, and had no issues until 2 days ago.  Suddenly, the touch screen stopped responding properly and was selecting the wrong icons.  It was impossible to write a text message!  The weird thing was that it wasn't selecting the next character/ icon to the left, it was completely random!!  Tried turning off and on and removing battery, but that didn't work!  Calibrating the screen also didn't work. 
    About 3 hours later I felt it vibrate in my pocket, so took it out and couldn't figure out why (no call/ text/ keypad still locked etc) but the touch screen was back to normal as if nothing was ever wrong!
    So, happy it was just a minor 'blip', I carried on using the phone (with no problems) until tonight... Exactly the same has happened!  Guess it'll be going back to Nokia for repair tomorrow!

  • E7 Touch screen gets stuck

    E7 would need a mechanical call disconnection button (could be programmed e.g. for on/off-button??), as the touch screen every now and then gets stuck and you're not able for example to end the call. Especially when you don't want to leave a message to a voice mail and the phone just keeps on going there's gonna be several f-words in the voice mail.......
    This is really irritating!

    After installing the newer phoneware from version 013.XXX to version 014.002 there is an not understandable phone reaction to end the call.
    Pressing on screen end call vibrates, but still shows on screen. Why - pressing few times activates some screen apps that appear after really ending a call. And it acts faster than auto key lock locks the screen and finishes to show "end call" button...
    Nokia 1611, 2210, 3110, 5110, 6210, 6310, 6310i (up to these models totally satisfied)
    Then don't remember model, then E50 (mostly happy), then N97 mini - phone with briliant keyboard, but poor touchscreen, then business phone E07, phone that can not make a photo of contract, invoice or business card. poor design of usb port and 5 months at service did it - my nowadays phone is Apple. Company gave me Asha 300, so frustrating, that I use my old E50 instead...

  • Touch screen not responseing HELP !

    my i phone 3gs has some sort of problem with the touch screen at the below part i can slide to open but i cant press anything at that area how to fix?

    Try this:
    PRESS AND HOLD VOLUME UP + Home Button + Power 
    Turn the phone off
    Press and hold Volume UP and Home (center) button
    Press Power until the phone vibrates
    Wait until you see the Android logo then release all the buttons
    Select Wipe data/Factory reset with VOLUME DOWN, press Power (right hand-side)
    Select YES...delete all user data with VOLUME DOWN and then Press Power
    After format, press Power again to reboot the phone (select reboot system now)
    If you are still unsure you should call VZW tech support.

  • Yoga 2 13 Laptop touch screen disable

    Hi Can any one please advise me , how to diable the touch screen of Yoga 2 13 laptop. Murali

    I upgrated to Windows 10 on July 31st with my Yoga 2 13 and I only ran into two major issue and a minor issue.
    Side note: my Windows logo button on the Bezel (vibrates when you touch it and then brings up the app tiles screen) hasn't worked for some time and still doesn't work after the upgrade - anyone know if there's a software fix, driver location etc?
    Major issue 1: No internet connectivity!
    - All network devices show up as working properly and all drivers upto date.
    - No possibility for network connection not even through bluetooth sharing via mobile phone.
    I discovered one post suggesting removing all Cisco VPN connections before upgrading as removal after upgrade didn't resolve the issue.
    Fix:
    If after upgrading you have no internet connectivity, revert back to your previous windows version, uninstall all Cisco and other VPN clients then reinstall windows 10. Internet connections should work now.
    Major issue 2: I am still having issues with Cisco based VPN's not staying connected. Haven't yet investigated a fix at the moment, just dealing with it.
    Admin Edit - Microsoft released a support tip related to the VPN / Wifi issue here -  https://support.microsoft.com/en-us/kb/3084164
    Minor issue:
    - Windows 10 doesn't recognize any of the transitional modes of the yoga (as in Lenovo transitions) resulting in the keyboard and mouse being disabled only in full tablet mode. Using Window's Tablet mode button in the action center doesn't disable these inputs either. Until Lenovo comes up with an update to Transitions this could be a serious annoyance for some folks.
    Minus these annoyances the move to windows 10 hasn't been too awful. Granted I haven't had much of an opportunity to try all the software I rely on as of yet, but in the next couple weeks I'm sure I'll discover several other hicups.

  • Touch Screen not responding - help!!

    The touch screen on my Galaxy S3 is not responding, I reset it to factory settings but it is still not working and now I can not set up the phone.. please help

    Try this:
    PRESS AND HOLD VOLUME UP + Home Button + Power 
    Turn the phone off
    Press and hold Volume UP and Home (center) button
    Press Power until the phone vibrates
    Wait until you see the Android logo then release all the buttons
    Select Wipe data/Factory reset with VOLUME DOWN, press Power (right hand-side)
    Select YES...delete all user data with VOLUME DOWN and then Press Power
    After format, press Power again to reboot the phone (select reboot system now)
    If you are still unsure you should call VZW tech support.

  • Problem push and hold on a Surface Pro tablet's touch screen

    Hi,
    I tried posting this before, but I can't find my origional post so I hope I'm not spamming accidentally.
    I have a problem with my program on a Windows 8.1 Surface Pro tablet. I programmed a button to be 'push-and-hold', but when I touch the tablet nothing happens until I release my finger. This briefly controls the button. When I connect a USB mouse to the tablet, it responds normally; when I press the left mouse button: the button in my program goes down until I release the mouse button. I tried about every setting in the Touch section of the Windows control panel without any succes.
    Does anyone have a suggestion?
    Any help would be greatly appreciated.
    Chris  

    Previous Post.
    http://forums.ni.com/t5/LabVIEW/Press-and-hold-on-a-Surface-pro-touch-screen/m-p/2816346
    If you clicked on your username and looked at your profile, you can see the messages you've created or replied to in the past.

  • Why did my brand new Ipod 5g 32gb touch screen stop working?

    So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?  

    If the reset does not work try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Has anyone used a touch screen monitor with scxi.I am having video lock ups while using LV and MAX

    I have a PCI-MIO-16XE-50 daq card (dev1) connected to a scxi-1000 chassis address 0 ID 1, with a scxi-1102,1163,1163,1162 slots 1,2,3,4 respectively.Cable is connected to daq card to 1102 card .Micro touch screen is used on com2. Have tried other serial ports 1,5. Touch screen works fine with windows until LabView and max is installed .Video lockups,Max failures occur.MAX seems to confict with touch screen.

    Max is the NI interface for all the drivers. It may be a specific driver that is causing problems, perhaps NI-VISA. I would try installing things one piece at a time. Might want to start by uninstalling everything so that you start with a clean system. First install LabVIEW with no drivers at all. See if the Micro touch screen still works. Then try installing NI-DAQ. Install each of the drivers you need one at a time. If you don't need something, leave it out.

  • Touch Screen unresponsive after iOS 8 update

    My 1 year old 64GB iPhone 5 touch screen started to become unresponsive after iOS 8 update
    It's not consistent. Touch screen functionality will seize whilst phone is being used for either answering calls, typing messges, surfing, gaming etc and won't become responsive until it is turned off and on again (via power button). Home button is functioning with no problems.
    As the phone is now out of its warranty period I want to verify if it's the OS that's causing this or do I actually have a hardware issue.

    I have the same issue. iPhone 5, 1 year-old, not even a scratch.
    Sometimes my touch screen works, sometimes not. When it works, it is just for some seconds, then some phantom touches start to happen all over the screen, but specially, when i'm typing, it types z or m, when I try to type something in, and it receives it, it will act as z or m again....
    If I switch off my screen and switch on again... sometimes it will work, sometimes it wont... veeery unstable.
    I considered downgrading to 7.1.2 but since I heard it is ilegal I decided to wait for a new iOS release.... any suggestions? (already wiped it and the issue continued...)
    Is it really not recommended to downgrade it and have my phone funcionalities back?

  • IPhone 5S touch screen issues

    Hi! I have a lot of issues with the touch screen of my iPhone 5S! the touch screen have areas without response! but not always the sames areas!
    each picture represent the different areas without response in the touch screen! are not the same in some cases!
    I´m writing from Argentina, so we don´t have apple store here to go to replace the cellphone or repair it! I could buy the whole touch screen and replace it by my self, but I don´t know if is only a problem with the touch screen or maybe an issue with the battery or other hardware components!
    Sorry for my English! thank you in advance!

    Hi there Psycho_ar,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/TS1827
    -Griff W.

Maybe you are looking for