Touch screen works better than I'd hoped

Just had a chance to install a distributed exe on a Surface Pro. Very slick, so far. Several copies of logic and UI for duplicate controlled motion and sensors. Simple DAQ, this time (USB-6009), and USB-to-Ethernet adapter for UDP. Haven't seen MAX, yet, but someone here was running the LV2012 IDE with USB DAQ (of course an external monitor and a mouse helped a lot.)
Not to try a LV2013 app and see if a control with key focus will change value with a two-finger swipe (mouse scroll).
Disclaimer: I am not a Microsoft employee, but I have done work for them.

Hi,
I'm trying to use the USB-6009 through Ethernet with a USB over IP adapter (http://www.startech.com/Networking-IO/USB-PS2/10-100-1000-Mbps-Gigabit-1-Port-USB-over-IP-Device-Ser... but NI Max doen't find the device. It does it if it is directly connected through the USB port. You mention a "USB-to-Ethernet adapter for UDP" that you are using. Have you had any success with it? If yes, please, could you recommend me which device you used?
Many thanks,
Alex

Similar Messages

The screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

the screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

Have you tried a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

TS1398 problem in wifi range i use my phone my rume but i think china mobile is working better than iphone ......

problem in wifi range i use my phone my rume but i think china mobile is working better than iphone ......

I don't understand what you are asking here. Can you try and ask again?

How does the touch screen work?

Can someone explain how the touch screen works?

Google is your friend.
This explains it pretty well (the iPad uses the same basic technology):
http://electronics.howstuffworks.com/iphone1.htm
Message was edited by: Dave Sawyer

My iphone 5s screen won't work but the touch screen works perfectly...I've tried resetting it several times but it continues to stay black. How can I fix this?

Iphone screen is black but the touch screen works and everything else, I just can't see anything on the screen . I tried resetting it but that did nothing.

You held down the home & power buttons until the Apple logo appeared? This could take as long as 30 seconds or more.

Is the 4g ipod touch retina display better than the 3g Led screen?

I was thinking about getting an ipod touch but i don't know if th 4g ipod touch retina display is better or the 3g led screen is better?

How do you get AirPlay on ipod touch

The top of my iPod touch screen is darker than the rest of my screen after the newest update?

So today I turned on my iPod touch (5th generation) and it said there was a software update available. I updated it with no problem, but after the update I noticed almost half of my screen was darker than the rest at the top. (Posting screenshots below) I don't know if it's supposed to be like that because of the update or not. Also, I have a little blue dot (assuming it's a 'dead' or 'stuck' pixel) on my screen that was there when I bought the ipod BRAND NEW on February 13th of this year and I'd like to know if that may be affecting it? Any help would be appreciated!
The darker top screen:
Using apps and Safari the screen is normal:

Hi iBridgetx3,
You can try several things:
1. Go to Settings>Wallpapers & Brightness, and turn the Brightness up or down
2. Go to Settings>General>Accessibility>Increase Contrast, and play with the three options available there - I turned off Reduce Transparency, and turned on Darken Colors and Reduce White Point, because I like the color gradation on the wallpaper on my Home screen. But if you don't like it, then make sure Darken Colors is off, and try that with Reduce White Point both off and on to see what you like best
There are a lot of new settings specifically designed to address the variety of problems that people were having with the initial iOS 7 "look". Play around with them. You will probably find a combination that will suit you.
Cheers,
GB

Encore 2 WT10 - touch screen works poorly

Sometimes the touch screen does not work, or works poorly, as did replacement of the system, and continues. When it crashes I have to suspend the tablet and wait a bit, sometimes I have to play many times to select what I want. Anyone know what it could be?
T have a Toshiba Encore 2 WT10

You said; you have already changed the system.
What did you change? The ENCORE 2 WT10-A-102 was preinstalled with Win 8.1 OS.
Furthermore I guess that the described issue is related to busy OS.
Probably too many applications (apps) as well as processes run in the background and this might lead to short few dropouts or performance problems.

Why does my $40 wireless phone work better than my airport?

I have a $40 wireless phone... ge... 2.4ghz... that works in any room in my home.
I have an $200 airport that doesn't work more than 10 feet away...
What is the difference that makes one work so much better than the other?
Are they completely differenct technologies, and if so, why wouldn't apple use the better one?
Don't get me wrong, I love apple and I love the airport when I am in the same room with it, but just don't understand why it can't work through a wall.
agp g4 1 ghz - titanium powerbook - airport Mac OS X (10.4.8)
agp g4 Mac OS X (10.4.2)

There are several things that affect wireless technology all through the spectrum of Bluetooth, LAN's, WAN's
Here is a site that covers all aspects of the technology. This should answer any questions you have.
http://wireless.utk.edu/overview.html
Don

Iphone 5 touch screen works then becomes unresponsive.

The touch screen on my iphone 5 stops working sporadically every time I use it.
I will turn it on and start using it, but after about 15 - 30 seconds it will always become unresponsive.
What I do to get around this is to touch the power button -> turning the screen black.
Turn it on again and resume. But this is extremely inconvenient, to have to do this every time I am typing, playing a game, trying to control my music.
In the worst case scenarios I am unable to answer calls! -> As you cannot turn the screen off and back on while it is ringing and if my phone decides to become unresponsive I am unable to do anything!
I have noticed a slew of issues that have come since the new IOS has come out and this is the most incovenient of them all.
Can anyone help me out here?

This issue is driving me nuts too - began just after installing newest verson of IOS. I've reset to factory settings and I still have this issue.

Touch screen works when wet ipod touch?

my ipod touch fell into the water and the touch screen does not work, even if the device appears to work well in his other pieces. plays music, lights, but the screen is opaque. I want to know how I can solve.

but my ipod got wet almost two months. and every time I load it I never got the screen working. can be solved?

My touch screen barely works and nothing has happened to it. How do I get the touch screen working?

How do I re-set or get the touch screen fully working?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW.
If you've been through ALL these steps and you still have problems, then you'll need to bring your phone into Apple.

My touch screen isn't working so I can't use my iPad.any ideas how to get the touch screen working again?

My son has done something to his ipad2 and now his touch screen does not work so he can't get from the lock screen as the screen isn't responding to touch. Any idea I can't even switch it off to restart.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

Will this setup work better than my iMac?

I edit lots of DSLR HD video on adobe premiere CS6, and have been using a 2011 21.5" iMac with an i5 processor and 12GB of ram. I am going to ditch my mac (since I don't even use any mac based programs anymore due to fcpx sucking) and building a PC. Here are the parts:
Intel Core i7-3770K 3.5GHz Quad-Core Processor
$299.99
FREE
$299.99
Amazon
Remove
Buy
CPU Cooler
Choose a CPU Cooler
Motherboard
ASRock Z77 Extreme4 ATX LGA1155 Motherboard
$124.99
$2.99
$127.98
Newegg
Remove
Buy Combo
Combo discount automatically applied. (View details.)
Memory
Corsair Vengeance 16GB (2 x 8GB) DDR3-1600 Memory
$67.99
FREE
$67.99
Amazon
Remove
Buy
Add More Memory
Storage
Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive
$73.75
FREE
$73.75
NCIX US
Remove
Buy
Samsung 830 Series 128GB 2.5" Solid State Disk
$104.99
FREE
$104.99
Adorama
Remove
Buy
Add Additional Storage
Video Card
EVGA GeForce GTX 650 2GB Video Card
$149.99
-$20.00
$129.99
Microcenter
Remove
Buy
$20.00 mail-in rebate
Sound Card
Choose a Sound Card
Case
Antec Twelve Hundred V3 ATX Full Tower Case
$119.99
-$10.00
FREE
$109.99
Newegg
Remove
Buy
$10.00 mail-in rebate
Power Supply
Antec Neo Eco 520W 80 PLUS Certified ATX12V / EPS12V Power Supply
$54.99
$3.99
$58.98
Newegg
Remove
Buy
Optical Drive
Asus DRW-24B1ST/BLK/B/AS DVD/CD Writer
$19.98
$19.98
Outlet PC
Remove
Buy
http://pcpartpicker.com/parts/optical-drive/
Will this new computer work a LOT better than the machine I currently have? Will it be a worthwhile upgrade? Will my video card work well for my intended purposes in Premiere?

Go to the CS5 Benchmark http://ppbm5.com/ and review the results
To allow for future expansion (more ram and added hard drives) my PERSONAL choice would be a larger power supply
The computer I built is described in http://forums.adobe.com/thread/652694 - with an 850w power supply

Is there any way to get touch screen working for unit that got wet?

i recently had my ipod touch fall in water for a few seconds, and since then my touch screen will light up dimly, but is unresponsive. the unit works for sync on my computer, as well as playing on my bose sound dock. only the touch screen seems affected

If the liquid damage has occurred recently you should try to dry it completely before attempting to use it. Have you tried putting the iPod Touch into a bag/bowl of uncooked white rice? That would help to pull all the remaining liquid out of the iPod.
If, after that the iPod's screen is still not responsive then it's something you may need to have repaired or replaced.

Touch screen works better than I'd hoped

Similar Messages

Maybe you are looking for