Touch sensitive multimedia buttons don't work ! (Toshiba Satellite M645-S4050)
I've Toshiba Satellite M645-S4050. My multimedia touch buttons don't work except Vol+ and Vol-. All of them are making sounds when I touched but no action! 1) I uninstalled Toshiba Value Added Package (TVAP), 2) rebooted the machine, 3) installed TVAP then 4) rebooted again. But nothing's changed. 5) I reinstalled all Toshiba Utilities includes Assist and Flash Cards but same result. Also 6) I unplugged the battery and AC adapter because of static energy issue possibility and 7) choosed the default settings from the BIOS menu. Still same ! What am I supposed to do ?
If it's under warranty, I'd send it back to Toshiba and have them fix it right this time. It took 2 repairs for the Depot to fix my problem, by replacing the mother-board.
Call customer relations and try to get it sent to Toshiba "VIP" Tri-Star repair facility in Garden Grove CA 92843, they repair it when their regular service tech's can't get it right the first, or second time.
Fix it now, or it will be a hassle for you as long as you own it.
Similar Messages
-
Satellite A300-1G5 PSAG4E - Multimedia Buttons don`t work properly
My multimedia buttons don`t work properly any more. I`m talking abut the first 2 buttons (Mute and Media Player - buttons).
I just tried to reinstall VAP but it`s the same. I must say i can use Mute button but it won`t shows up that icon for mute.
The Media player button doesen`t work at all.
I just tried to search on this form for a sollution but i couldn`t find it.
All the rest of the buttons (play/pause, stop, next, previews) are working just fine.
As far as i remember 2 days ago all my multimedia buttons worked perfectly.
In this time i didn`t reinstalled OS or any other drivers.
I`m using the last version of BIOS (downloaded from toshiba website) and Windows 7 Ultimate. I have a Toshiba Satellite A300 - 1G5 PSAG4E.
Can you give me some advices about that pls?
Message was edited by: blunthloxSolved. I used a system restore at yesterday`s date and it`s ok now.
-
Touch wheel and buttons don't work
Touch wheel and buttons dont work. Ipod works with my Alpine car stereo, while using the stereos selector wheel. Sometimes the Ipod tries to work normally, but the buttons still won't work.
You might want to try the five R's
iPod Issues?
These five steps (known as the five Rs) will conquer most iPod issues.
1. Reset your iPod.
2. Retry with a different USB port.
3. Restart your computer.
4. Reinstall iPod and iTunes software.
5. Restore your iPod.
If none of these work, the easiest thing to do is go to the "great" Apple store they know everything overthere.
DELL 4600 Windows XP Apple iPod, 5G, 30GB, white -
Control buttons don't work on Satellite A300 with Win XP
Hi,
I bought a new Toshiba A300-1MX a few days ago.
I had windows XP installed. Service Pack 3. BIOS is version 1.50 (says so in the BIOS).
The problem: My shiny media keys dont work. They just dont respond.
Anyone with any suggestions?
I have downloaded the commute models models driver for XP plus the hotkey utility for XP, and after installing it the FN keys (ESC, F1-5-6-7-10-11) work (altho the F2,3,4,8,9,12 dont work).
Thanks people.
SaschaBecause the A300-1MX belongs to the PSAGCE series you have to choose and download the XP drivers for this model.
I checked the Toshiba driver page and there is a BIOS 1.40 only. So dont understand why you talk about 1.50 Bios.
Secondly the Toshiba media buttons will function if you would install the Toshiba Controls utility from the page.
Last but not least you need Common Modules to get the FN buttons working.
The single FN buttons like F9 for example need a additional tool like Touch Pad On/Off Utility
The Fn F2 or FN F3 will work if a Power Saver has been installed and hibernation has been enabled.
So as you see you need further tools! -
Satellite U400: Need Vista install order and Control buttons don't work
I bought an Satellite U400-11T model with french windows Vista.
I want to change the french Vista to hungarian Vista.
Of course I bought a legal vista HUN and downloaded the drivers etc.
I am interrested in about the install order called installation instruction like at the XP models.
My second problem is; I have already installed the new Vista HUN and the 6 easy key touch buttons don't work anymore.
Where can I switch on it or wich program must i reinstall?
Thanks
SchmidHi
The installations order for Satellite U400 should be as follow:
Windows Vista SP1
Intel(R) Chipset Module
Intel(R) Robson(Intel iMSM Driver)
Intel(R) Crestline-GM / UMA Driver or AMD M82XT /M86 Driver V8.452.2
Conexant CX20561 Audio Driver
Marvell 8040/8055 LAN Driver
Synaptics Touch Pad Driver
Alps Touch Pad Driver
Conexant Modem Driver
Netwaiting
Modem Region Select Utility
Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver V7.1.62.2012
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Utility
TOSHIBA ConfigFree
TOSHIBA WPS Library
TOSHIBA Assist
TOSHIBA Speech System
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer V2.02.00
Toshiba HDD Protection
TOSHIBA Face Recognition
TOSHIBA TRS Driver
Broadcom
HDMI Control Manager
Please do not ask me about single tools. Install all offered stuff following this list and I hope everything will work well.
Bye -
Satellite A300-1GN - Media buttons don't work with Win 7
Hei
I installed windows 7 to my Toshiba satellite a300 1gn, Short Model No: psagce and some illuminated media buttons don't work.
i have the latest drivest but still nothing. first button is should controll the illumination for media buttons, touch pad and Satellite logo.
second button should open media player or something like that. the other fore buttons work fine!
Could someone helt me solve my problem?Hi
You have to configure the single buttons.
This Toshiba button support pop up will appear if the pressed button was not configured.
So press the button and then assign the action, application.
You have to expand this menu pressing on the small arrow on the right.
Greets -
Portege M750 and Win8.1 Pro -tablet buttons don't work
Hi
I'm having difficulties installing the tablet buttons in WINDOWS 8.1 Pro. Everything else works, perfectly.
In Windows 8 Pro this buttons worked nicely, but now, after a clean install of Windows 8.1 Pro two of the buttons don't work. The buttons are the Toshiba assist button and the presebtation button. I've tried to configure them in Toshiba assist software but nothing happens.
I'm sure I've installed all drivers that made wverything work with Windows 8. As anyone tryed this and add success?> I'm sure I've installed all drivers that made wverything work with Windows 8
Windows 8.1 is not Windows 8 and many of Toshiba Win 8 drivers and tools dont work or are not fully compatible with Win 8.1
As far as I know the Toshiba does not support Win 8.1 on this Portege M750.
This means that no Win 8.1 drivers will be released and in such case some notebook features like the control buttons could not work properly.
Fact is that using Windows Vista or Win 7, such buttons were controlled by Value Added Package. This package does not exist for Win 8.1 and has been replaced by other software called Toshiba System Driver
So in case you want to try to get the buttons to work, I recommend checking this with Toshiba System Driver -
Satellite A300-1JH PSAGLE: Control buttons don't work with XP
Hello there.
I own a Toshiba Satellite A300 psagle.
It works beautifully, but there is a problem: the tactile music buttons don't work.
I am using Windows XP and I have installed all the drivers available.
Could some one please tell me what I should do.
P.s. how can I activate the "face recognition" option?
Please reply.
Regards.Hi
Regarding the Toshiba Control Media buttons;
You have to install the Toshiba Controls from the Toshiba European driver page.
Check there the Satellite A300 PSAG8E series and download the Toshiba Controls
Regarding the face reorganization:
Check these threads:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=127846🍦
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=131453
Bye -
M30 - Front Mode and Audio/Video Control buttons don't work
Hi
The Front Mode and Audio/Video Control Buttons Don't Work
Any ideas?
ThanksHi
As far as I know the Toshiba Controls utility is responsible for key usage.
Did you try to install Toshiba Controls?
Check the Toshiba driver page for this driver.
Bye -
Front buttons don`t works Qosmio X300
The front buttons don`t works. I can`t turn up and down the sound or take on or off the light on the computer.
I can`t push a button to take next song.
Do anybody have a good answer on that?Hi
I think you are talking about the Toshiba Control buttons.
This buttons are controlled by software which is a part of VAP (value added package).
I would recommend removing the old VAP. Then to clean the OS using the CCLeaner and finally after an further notebook reboot you could reinstall the VAP again!
Check if this helps. Usually it should -
Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
"Archive" and "View" buttons don't work after folio update
Hi all,
I have a subscription to the professional edition and I have built a custom viewer app for Android. I have built about 10 folios and at first download all is ok, the folios are displayed without problems and the app works fine except for one issue: "Archive" button don't work, when I tap on it, near folio cover, nothing happens, the folio does not disappear from folios list.
But the serious problem occurs when I perform a folio update from Folio Producer ('Update content' from adobe dashboard DPS): both "Archive" and "View" buttons stop working, nothig happens when I tap tap on them and I am forced to uninstall and reinstall the application on tablet (.apk file) to see folio changes in my custom viewer.
This is very annoying as well as time expensive.
Tablet is Samsun Galaxy Tab SII with Android 3.2.
Any help is appreciated.To the best of my knowledge, the SII is a smartphone and not a tablet device, and the official claim is (correct me if I'm wrong) that DPS on Android is corrently tablet only.
Anyway, it seems strange to me so checked and found out that even though the DPS apps are not available when you search for them in the Play Market of a smartphone you can still force load them to the phone and run them.
I've done it on both a Samsung SIII running Android 4.0.4 and a Samsung GT-I9070 running Android 2.3.6 (I currently don't have a device running Android 3.2)
The interface is so small that it's hardly possible to use it, but it works. -
My Finder is going crazy. Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop. buttons don't work.
Something else you can try.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist. Move the .plist to your desktop.
Restart and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates. -
I created my template in Dreamweaver and 9 other pages from
the template. Now I inserted flash buttons in the original template
and linked them to all other pages. Buttons work in the original
template but not in any of other pages, even though I updated the
pages with all the changes. What am I doing wrong??? I am losing my
mind here.
Any help appreciated.
Thanks!Flash buttons don't work in any real sense of the word,
anyhow. Why are you
using them?
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
This problem is due to the fact that you are placing the
buttons into a
Template file. In this case, and assuming you want to inherit
all the
problems, make the links to the buttons ROOT RELATIVE.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"zxh5079" <[email protected]> wrote in
message
news:ga1gp6$qos$[email protected]..
>I created my template in Dreamweaver and 9 other pages
from the template.
>Now I
> inserted flash buttons in the original template and
linked them to all
> other
> pages. Buttons work in the original template but not in
any of other
> pages,
> even though I updated the pages with all the changes.
What am I doing
> wrong???
> I am losing my mind here.
> Any help appreciated.
>
> Thanks!
> -
IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.
I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all. I have already tried the following:
Switched the Lock Rotation/Mute settings in General
Power cycling it
Held the sleep and menu button to reset it (the button worked for that at least)
Done a network reset
Reset All Settings and restored from backup
Reset All Settings and restored from iCloud
Erase All Content and Settings and restored from backup
Erase All Content and Settings and restored from iCloud
If anyone has any OTHER suggestions besides what I've already tried, I am all ears. Thanks.Go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.
Maybe you are looking for
-
Help needed in MERGE statement
Hi, I am new to PL/SQL, I want to update a table called "final_test" based on the below query result. 1. I want to check whether that particular record is present or not in my "final_test" table. 2. If its present in the "final_test" table and the pr
-
How to wipe away my iphone4s which was stolen by the chief?
It will be appreciated if you have patience to listen my story and help me to solve my misgiving. Two days ago(before Chinese New Year), My iphone4S was stolen when I was helping selling in my cousin's store, The chief came into the store and bought
-
Convert Word Doc to PDF - font in Excel object is changed
Hi, I have tried to convert a word document to PDF. The document has an Excel object embedded. In the PDF file created by acrobat.com, the font in Excel object was changed (no longer Times News Roman). Can someone please contact me and give it a try?
-
Oc4j server embeded in Jdeveloper 10g is not ruuning
hi, 1. I am trying to run ocrj server embede in Jdeveloper from command promt for which as given step in Jdevelioper handbook , i proceeded as executing setvars -go from directory jdev\bin , but i am getting the following error D:\JDev\jdev\bin>setva
-
How many R/3 instalations on Oracle?
Somebody know where I can find this information? regards