Touch Smaart pavilion 1050uk - Windows 7 home premium does not boot up!

No matter how many times I press F8 or boot up from a CD, it starts loading the files, then the PC gets stuck. I have tried to use one of those CDs tools which promises to boot up a PC in any state, it does not work. I know how to double check the fist boot up device (in BIOS, done it) -
It all started because I have scheduled a check disk on restart but this was interrupted due to a power failure, since then I have been unable to get windows 7 to start.
The funny thing is that at the start up it gives the option to run diagnostics and all of them passed, including the RAM, Hard drive, and even the boot path!!
This is ridiculous, how can I get windows to start again or at least access my files which were not backed up yet and then save them? Thanks

Hi
I know you said you tried to boot from cd's but did you try to boot from a Windows 7 installation disc? if not ...try it ..and instead of installing go into the "repair your computer" option and try the "startup repair" tool...try it a few times before you give up on it..sometimes it can take a few attemps to fix a problem. If that fails you can try to use the command prompt to fix it....here's a link to the bootrec commands BOOTREC COMMANDS <<<< YOU USE THIS AT YOUR OWN RISK!!! If you do not have a Windows 7 installation disc you can use this instead WINDOWS 7 REPAIR DISC <<<<<this will give you the windows 7 enviroment to try the above repair methods, you will also need a torrent client to download this disc >>> UTORRENT . If you cannot boot into the windows 7 disc (this is a long shot) you can try to boot from USB >>> BOOT WINDOWS 7 FROM USB
Good Luck!

Similar Messages

Windows Vista Home premium does not boot up properly

My vista laptop worked fine for two weeks then started having many problems.
Programs stopped working and the windows problems report and solutions kept popping up I think I have over 40 issues unsolved.
Then if I haven??t been on the laptop for a while I start getting the blue screen of death, and won??t boot up for 20 mins because it is running thought a restart every time because of the blue screen. I have formatted the computer a few times and still have the same effect after a while.
I think that this could be a software issue more then a hardware problem but I don??t want to go back to windows XP.
I can?t install the service pack 1, when I try and install it says there is an internal error.
I don't know how to solve my boot up problems any ideas ?
Because it is wasting alot of time, I don't know if i should return my laptop
thanks

Hi mate,
such issues - especially a BSOD - are not very good signs of an healthy system/machine. Did you recently installed some new applications or something else??
If NOT I would suppose some hardware failure (memory, mainboard), because such problems appearing out of the nowhere are most likely hardware based and not really software dependant..
If you really formatted your HDD several times and nothing was solved after re-installation of the system, then contact an [Service Center|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] send the machine to them and let them check your machine on hardware malfunctions. You have a warranty, so please use it.
Greets

Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out.

Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out. HP 600-1315xt.
Have tried everything I can find on internet and here on HP. None of the suggestions worked. Windows fixit for windows could not fixit. Any suggestions are appreciated. I can always use my disks and rebuild the computer. A last resort.

Hi,
It might be the graphic driver not compitable with the graphic device. Has there been a change to the graphic driver?
One thing you can try is to uninstall graphic driver and download the latest from Windows Update (if you haven't tried this). Here are the possible steps:
1. Go to Control Panel->Hardware and Sound->Device Manager, uninstall the graphic card driver by right clicking and select "uninstall". Make sure the option "Delete the driver software for this device" is selected.
2. Reboot the system.
3. Go to Control Panel->System and Security->Windows Update, click on "Optional updates" and find the driver for g210 and do the update.
I work on behalf o HP.
Please click the white Kudos star to say thanks.
Please click Accept As Solution if you found my response helpful.

Laserjet P1005 used with Windows 7 home premium does not print out envelopes

Laserjet P1005 used with Windows7 home premium does not print out envelops generated with Microsoft Word.The printer does envelops when used with Windows2000 Professionel or MP.Any help would be appreciated!Otto

Is that a HP driver or Windows driver for Windows 7? http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-P1000-Printer-series/3435674/model/3435675#Z7_3054ICK0KGTE30AQO5O3KA30R1 Is this the version you installed?

HT1212 what if your home button does not work to try to fix the connect to itunes problem?

How do you diable your locked i pod touch using itunes if your home button does not work?

Use one of these programs to place the iPod in recovery node:
RecBoot: Easy Way to Put iPhone into Recovery Mode
The Firmware Umbrella - TinyUmbrella

Home button does not wake up iPod Touch

Hey all,
After the iPod screen turns off automatically after the preset idle time, pressing the "Home" button does not wake the device up from the first press; on some occasions it has to be pressed twice before the "Slide to unlock" screen appears.
This is intermittent and I can't pin down how to accurately reproduce the issue, but it seems to happen randomly. I have never experienced an issue where the "Home" button didn't work when pressed during normal operation, so I don't think it is a hardware issue with the button itself. Note that I had this issue before updating the device to 3.1.2 as well.
I have auto-lock set to 3 minutes, with Passcode Lock on.
The device is the 32GB model MC008C, updated with the latest 3.1.2 (7D11) OS.
Cheers

sorry to reply and intrude here but i cannot for the love of god find he new thread button. (maybe a mod will move me please)
I recently restored my iPod touch and i didn't really watch the restore. I know the loading bar on ipod was nearly at end. Anyways, 10-15mins later i go to use my ipod and clicking the home button nothing displays.
I then try to turn on, yet nothing. So googling, i left the battery to completely drain if there is any.
I plug my ipod into my computer and nopthing happens, it does not wake up(turn on) or even charge. I have tried an Iphone wall charger, yet no response from my ipod touch as well.
So i kept googling and i found out about some DFU mode, there was lots of different combinations on the web, i tried them all, yet my ipod does not respon. No noises, notifications or anything in itunes(if itunes closed, does not open up!)
It has now been a good few days since it stopped working, and i cannot think is there anymore to do. It is still in warranty for a few months.
Only problem is, i do not think i;m entitled to phone support, and the nearest genius for me is hours away.
PS: my iPod touch was restored to version 3.2 (latest version if thats wrong <!-- )
I have itunes 9.1
Running windows 7 rc
I have tried my ipod also on the following:
My dual boot vista, another computer with vista and a Mac Pro.
Can anyone suggest anything or help me please?
Thanks in advance,
Malcom

How do I re install windows home premium OA?

I had windows home premium OA on my computer , but I believe it was accidentally uninstalled from my hard drive. I have the product key that is on my computer. I was having trouble finding the correct link to reinstall it on my lap top.
When I went to the microsoft Website all I found was support for windows 8 . Can you give help me with the proper link? thank you

Please provide the manufacturer and model of your pc.
It is possible you have a hidden recovery partition on your hard drive which may be used instead of a recovery disk to restore your system (and Windows) to factory defaults.
Recovery procedures vary from manufacturer to manufacturer.
You should also search for any recovery disk/s that were supplied with your pc. Manufacturers invariably charge a significant fee to supply replacements.
If you decide to use borrowed/downloaded media to reinstall Windows on an OEM pc, the process may not be straightforward. Without some experience and patience you may end up with no other option than to pay a professional to finish the job.
Microsoft does not publicly provide download links for Windows. While you may stumble upon an official download source, beware that many unofficial sources will come pre-loaded with viruses, trojans etc.

ITunes 9 Home Sharing does not work on Windows 7 x64

iTunes 9 Home Sharing does not work on Windows 7 x64.
Getting the following error message:
Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
I've just upgraded my iPhone to OS 3.1 using it this morning.
Please advise.
Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
Ivan Farkas
<edited by host>

I am using Windows 7 x64.
I am running iTunes 9.0.2.25
I am running Mcafee.
I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
Message was edited by: turcott

My ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

Get it fixed then, make an appointment with the Apple genius bar.

TS2771 my ipod touch home button does not work how do i fix this?

my ipod home button does not work. How do i fix this?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Ipod touch 2nd gen home button does not respond

I have tried restarting my ipod several times but my problem still trmains.
The home button does not respond. I can get to the screen with all my apps, but once I get into an app, I cannot exit it. What can I do?

See:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
You can also go to Settings>General>Accessibility and turn on Assistive Touch It adds the Home button to the iPod's screen.
Yes, if you get it fixes, the iPod will likely be erased. Apple will not repair your old iPod, they exchange it for a refurbished one and do not transfer data.

1st generation touch home button does not work

What are my options and what is the best option for 1st genernation touch on which the home button does not work? Otherwise functions perfectly. Thank you.

Apple will exchange it for a refurbished 1G for:
$149 for 8 GB
$199 for 16 GB, and
$249 for 32 GB
not worth it for yor old 11G
Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 cont...

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 ULTIMATE then after the exctraction of files and everything the windows setup came and my mouse and keyboard stopped working and i dont know how to open mac os x there is no option anywhere?? what shall i do pls help!!!!if there are any keyboard shortcut key to open mac os x or boot camp pls mention.

For Boot Camp issues please repost in the Boot Camp forum located by clicking Boot Camp

Can I change the OS of Touchsmart 610 from Windows Home Premium to Windows 7 Pro?

I have 610 1100me system loaded with Windows Home Premium 64 bit. We bought it from Dubai and is in use in Pakistan. It started giving problems after few weeks of use. Its' hard disk makes noise and sometimes, system could not find boot disk. Most of the times blue screen of death and hanging issues. Any idea about this issue and how to fix it? My observation is that the culprit is hard disk!
Also, can I change its OS to Windows 7 Pro or ultimate (32 or 64 bit)? Where can I find all drivers for Pro or Ultimate?
Many thanks for your valueable advice.
Regards,
KK
This question was solved.
View Solution.

Hi,
Nearly nothing change interms of drivers required for Windows 7 (HP, Pro, Ultimate) unless you switch from 64 to 32 bit. You can reuse your current HP 64 bit drivers for 64 bit W7 Pro or Ultimate.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

yes, though you may need to use compatibility mode to install.

Touch Smaart pavilion 1050uk - Windows 7 home premium does not boot up!

Similar Messages

Maybe you are looking for