Touch tones not working with FaceTime/Handoff Calls in Yosemite

Has anyone successfully used the new Handoffs feature to call into a conference bridge? I've tried and failed a few times now. I hear the touchtone sounds when I enter the numbers on my keyboard but they are not recognized. One service - GotoMeeting - responds back with "You entered zero numbers".
Here is a number you can try calling. +1 (646) 749-3131
If it is responding back to you with "You entered [the numbers you entered]" then I guess it is just happening to me.
Thanks for your help!
---Marc

Works fine on my MacBook Pro (Retina, 15-inch, Late 2013), and iPhone 6 with iOS 8.1.

Similar Messages

After upgrading to Lion internal mic does not work with Facetime

After upgrading to Lion internal mic does not work with Facetime. The mic is picking up sound as noted in System Prefs. This was working just fine before the updgrade. Facetime works OK on my iPod.

you have in french a tutorial to recreate your partition here
Rebuild partition with Recovery HD lion after upgrade to 10.7.2
i tested, it's work !
For your wifi problem:
Try to change your setup of wifi, look this table given by apple:
I changed my wifi setup wep to wpa and it's work !

My iPod Touch is not working with Bose SoundDock. How can I fix it?

My iPod Touch is not working with Bose DoundDock Series II. Can anyone suggest how I can get these 2 to work together?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
iPod Touch Repair – iFixit

TS4185 Blackmagic ultrastudio not working with facetime

Blackmagic ultrastudio not working with facetime, however the audio of the ultrastudio is recognised and can be selected in the source section what can i do to get facetime recognise it? also wirecast virtual camera is detected and recognised by facetime but doesnot work anyway to fix that?

Best option is to do a reset (restart) of the iPad to do this press and hold the On/Off button and the Home button, until the Apple logo appears. It will show you the "Slide to power off" just carry on holding the two buttons down until the logo appears and then release and that should have your FaceTime working again with your cameras.

My 4th gen iPod Touch does not work with Ford sync since updating OS

When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

Have lots of issues with Fords MySync and here's some info that might help....
Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
http://www.ford.com/syncmyride/
or call 1-800-392-3673 Opt 3
A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
Good Luck

Touch pad not working with HP G60 operating on Windows 7

I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
I was using touch pad and wireless mouse interchangeably for past year.
No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems. On one occasion, i was not even able to type and that resolved after re-starting computer.
There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment.
Would appreciate any advice about what is the problem and ways to resolve it.
Thanks a lot!
Mo

Hi,
The numbers are fine
Try the following.
First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this. Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Camera not working with FaceTime

camera isn't working with FaceTime, it's frozen... But works with regular camera

Best option is to do a reset (restart) of the iPad to do this press and hold the On/Off button and the Home button, until the Apple logo appears. It will show you the "Slide to power off" just carry on holding the two buttons down until the logo appears and then release and that should have your FaceTime working again with your cameras.

IPhone, iPod Touch will not work with Skullcandy Icon2, Icon 2

I pulled my Skullcandy Icon 2 's out for my ski trip and found that the mic and control had stopped working with my iPhone. Thinking that the Mic/Button had broke I went out and picked up a new pair, which also didn't work.
Both sets of head phones were tried on an iPhone 3g, iPod Touch 1st Gen. and iPod Nano 3rd gen. None of which would allow control of the devices in music mode or call answer.
To rule out a defective headset, I connected them to my friend's phone, a HTC Hero. The controls on the Icon 2 would play and pause any music program, including Pandora including controlling calls, (answer, mute and hang up).
I haven't found anything other then lint in the head phone jack to as a solution to this. (not a solution for me).
If anyone has any suggestions please let me know.
Hardware Info:
Skullcandy Icon 2 Purchased 2009-2010
Skullcandy Icon 2 Purchased 12/2/2010
iPhone 3g Software version 4.2.1
iPod Touch Software version 3.1.3
iPod Nano 1.1.3

Has this worked for you in the past? I am under the impression that your units are older and do not support this functionality. See <http://support.apple.com/kb/HT3310>.
I'm interested in what you find out
Allan

External usb microphone not working with FaceTime and mac mini with os x Yosemite

Hello
When I try to do a phone call with face time through my iphone 6 face time is not recognizing my external usb microphone connected to my mac mini. I have just updated my mac mini to os x Yosemite. If I go to the audio system preferences and look to the audio input signal I can see that the external microphone (SB Omni Surround 5.1) is working (audio input level is showing an input signal).
Can someone help. I saw that this was also an issue in the beta versions of Yosemite.
Thanks.
BR Stefan

Interesting. I don't have a USB mic on the Mac Pro. Its the OLD FireWire 300 iSight. It works for FaceTime calls but not the iPhone call via the FaceTime app.
I also have 2010 MBP that works perfectly, even since the first Public Beta. I'm to sure if that mic is considered an external USB device or not, or if it has to do with device signatures vs. external or internal. I would almost assume that the built-in mic is on the USB bus. How would it be any different than the external USB.
I think I have to agree that this is a point release bug. I have submitted a bug report at bugreport.apple.com, and would ask others to do the same, or at least post to apple.com/feedback. The more noise we make through process the more likely to get a fix in the .1 release.

1st gen ipod touch will not work with new iTunes 11.help!

1st generation Ipod Touch. I ran an update on my ITunes on my PC, and my IPOD will no longer connect to my itunes. Please help. If at all possible.

iTunes 11 works with all model iPods.
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
iOS: Device not recognized in iTunes for Windows

U430 Touch: wireless not working with windows 7

My friend bought a U430 Touch with Windows 8. He hated Win 8 so I helped him downgrade to Win 7. Now the wireless dowsn't work. Ethernet works fine and we are able to get on the internet, but wireless does not work at all. I've been to Lenovo's site and downloaded the drivers from their support site, but nothing weems to work. Is there a special driver I'm missing?
Solved!
Go to Solution.

It's possible that they are shipping with Intel only at the moment, but the Hardware Maintenance Manual lists two non-Intel cards: a Liteon, and a "non-Intel", whatever that means.
Just sayin'
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Apple ID not working with facetime and messages what to do

I'm not sure when this issue occurred but I cannt use my facetime and messages at all. My apple ID works with everything else but facetime, messages and oh yeah icloud . I have changed my ID like three times and I also looked at my DSM but nothing. I'm frustrated because I live in Trinidad where there is no apple store to correct this issue. Please help someone!!!!!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Camera not working with Facetime under iOS7

Hello,
My front camera doesn't work since upgrading my iPhone 4S to iOS7. The image is not clear (I just see my shadow)
It was working perfectly under iOS 6.1.4
The front camera is working with other apps like Skype and I can take picture with Camera' app.
I have an iPad and there Facetime works correctly.
Does anyone has the same problem ?
Soft or hardware problem ?
Many thanks for your help.
Kind regards,
Sébastien

I have the same issue, and when i try to switch back to my other camera, it freezes the screen and I have to force shut down the camera app.
It all worked fine before the install of ios 7
I have tried reinstalling the software by restoring the phone, but its just the same.

Ipod touch equalizer not working with radio

My first Apple device just purchased today. The ipod Touch 8GB Generation 4. The first thing I did was downdoad Tunein to listen to radio. I noticed the preloaded Apple equalizer with presets does not work. Is this normal with radio or this app. Does the equalizer only work with itunes music player? Thanks

It's a bookshelf stereo system with an output channel so I have a Logitech Jukebox Internet Radio hooked up to it and it works fine but the iPod Touch ..... nada happens when I plug in the output cable to it.

Touch id not working with iTunes and App Store

Touch ID will work to unlock my phone, but not with iTunes or App Store. It keeps asking for my iTunes password. I have turned on 'Use your fingerprint instead of your Apple ID password when buying from the iTunes & App Store'. I am running IOS v7.0 (11A466)

I was having this issue too, it was always asking for the passcode even though the setting was on for iTunes & App Store. To fix it I turned it off and then back on again, it asked for my password and then it worked.
Steps:
- Go to Settings -> General -> Touch ID & Passcode -> Touch ID
- Disable iTunes & App Store
- Re-enable iTunes & App Store
- Enter your passcode one last time
- It should work
Also as others mentioned, under General -> Restrictions -> Require Password might need to be set to 15 minutes.

Touch tones not working with FaceTime/Handoff Calls in Yosemite

Similar Messages

Maybe you are looking for