Touch up tool - Full document selection

It seems I can't select all, and use the Touch up tool to change the size of all my text at once.
Is there any way around this?
I am currently scanning old journal pages into pdf (through scansnap [Fujitsu scanner) and using acrobat 7, then converting to word to do a bit of editing where needs be. ( journal was typed and printed from pc in the past), biggest issue I am having is text converting over strangely, all sorts of fudged up symbols being generated etc.
But I did notice when I enlarge the text, and change it all to arial font via the touch up tool, that it converts over much better when I save as .doc
I just need to be able to select 30-50 pages at a time, being that doing one page at a time would take forever when I have over 2000 pages to go.
Any help would be greatly appreciated, Thanks.

If you want to better conversion provide a better scan. Scan at 300-400 dpi. Scan to tiff and import the tiff.

Similar Messages

Touch up tool

Hi there,
there is a problem I come across quite often with the Touch up tool in adobe acrobat 8 professional which is remove/add characters from a document. Specifically this time I am trying to remove a dot from a bullet list which partially disappear after tagging the document. There's only one dot left and I tried to use the touch up tool to remove. The touch tool loads fine but when I try to use it it comes up with
a message saying: "All or part of the selection has no available system font. You cannot add or delete text using the currently selected font." I attached the message and the document I am trying to modify (on the top right there's a red box with a list containing: indoor rowing, dance, aerobics, kurling - which has a white dot which I want to remove). Can anybody tell me why that happens and if there is a workaround?
Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
Ant_rich wrote:
...Can anybody tell me why that happens and if there is a workaround?
I have encountered the same problem, a simple workaround is to highlight the text (in touchup mode), right click and hit Properties. The properties screen will allow you to change the font to one that you have.(See screenshot attached) Once you do this, you can then delete the text. But note that you can't change the font back (as you don't have it).
If you need to add or edit moret ext you may need to this to the whole document, otherwise you'll have different fonts in the pdf.
Hope that helps.

Text Touch Up Tool

I want to edit just one word in a scanned text document. I used the OCR text recognition first and then selected the Text Touch Up Tool. I then highlighted the one word and a cursur was displayed which made me think I could edit the word. When I tried to backspace to delete the word the cursor moves along the line of the word but nothing happens, nothing is deleted. If I try to type the cursor advances but none of the characters are displayed. Am I doing something wrong? Thanks!

If you're using Acrobat 9, you'll need to select Clearscan in the Recognize Text Setting menu. This will allow you to utilize the Touch Up Text tool to make changes to the document. However, note that you'll need to change the font from the custom fonts to a font that is available on your computer.

When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer" most of which are years old and many are recurring events. I'm afraid to proceed

When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer" most of which are years old and many are recurring events. I'm afraid to proceed with sync.

Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream.

F.13 - No document selected-v

Hi,
1. I created a Goods receipt for 10000
2. I created a MIRO for 10000
3.I am trying to do GR/IR clearing throught F.13.
by selected the following parameters:
      Company code
       Fiscal year
       GR/IR clearing account (it is a post automatically in the GL master)
I am getting the message
No customer documents selected
No vendor documents selected
No G/L account documents selected
4. I have done the configuration of 'Automatic clearing in OB74 as follows :
Account type    A/c No from            A/c No. to         Document number
S            0                            9999999999     BELNR
But still I am not able to clear the GR/IR Account.
It is very very urgent issue
Thank you

Hi,
In f.13
Give co.code:xxxx
Select vendor check box and give vendor A/C no-----(if it available)
Select G.L account check box and Give g.l account no ( important)
Select G.R/I.R clearing check box ( if it is avaibale)
And give clearing date : most important
Then execute you will get result
If it is use full please assign points
Thanks
RAM

Type Tool does not select type by double clicking or click and drag. (Windows CS 5 V15.1)

Hi,
My Type Tool does not select type by double clicking or click and drag. (Windows CS 5 V15.1). This is what I have tried so far and the problem still exists.
Check preferences for "Text": "Select text-object by path only" should be off. Checked. It was off. Didn't fix it.
Check the toggle for Show/Hide Edges in the View menu. Cmd(Ctrl)-H. Checked. Edges Showing. Didn't fix it.
Trashed my Prefeerences. Didn't fix it.
Any other suggestions out there?
Thank you!!!

I figured it out! I feel pretty silly, but I will share this in hopes of helping the next person :/ Here goes. Don;t laugh to hard!
It was the leading! The space between the two lines of text was less than half of the point size of the actual text. So it looked like two lines but there was actually 3.
Geeze, I'm embarrassed! Thank you for suggesting that I may not need to recreate the entire document, but start with the text, input manually again (even on a new layer, to match the original), which lead to a fix!
Thank you!!!

Touch pen tool appearance

How can I get the touch pen tool to appear on a file if I'm opening an image. It only appears now when I open a blank work space.

Yanina,
What happens if you File>Place (the PDF contents, if any, of) the troublesome file in a new document, then try the Pen Tool?
If that works, you most likely have a corrupt file.
One thing often tried first is to create a new document and File>Place the (PDF contents, if any of the) corrupted one, as already suggested above, to see how much may be rescued that way.
Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
http://www.illustrator.fixtoolbox.com/
As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html

Clicking the Stamp tool doesn't select the most recently used stamp - Acrobat X

My issue is pretty much what the title says. Clicking the Stamp tool doesn't select the most recently used stamp. According to the Help screens and training videos, it should. I've checked Edit > Prefernces and could not find a setting that adjusted this behavior of the Stamp tool. Does anyone know what can be done to fix this? BTW - It's not just my installation of Acrobat X. Other users at my firm are having the same issue. The OS is Windows 7. Users have administrator rights. Thanks in advance.

Hello Abhilasha,
So, what your saying is that this function, the ability to select the most recently used stamp by clicking the stamp tool, has been removed, in spite of the fact that Acrobat's Help pages says it can be done (Using Acrobat X Standard > Collaboration > Commenting > Apply a Stamp > Step 1 > Second bullet). I wish they would put it back. It was quite handy.
Perhaps I should adjust my request. Do you (or anyone else) know of a way to use the same stamp several times in a row without having to choose the stamp from the stamps list? For example, if you needed to put a check-mark stamp in several places in a document, it would be a pain to have to go back to the list each time. Is there perhaps an undocumented feature (maybe holding down a particular key while using the stamp) that would allow for multiple stamping?
Thank you,
Phillip

Touch type Tool - two improvements

Hi!
Tool "Touch type Tool" cool and long awaited feature. Well done and thank you team Adobe illustrator.
Missing:
1. The shift key to move the font in fixed axis.
2. The ability to select more than one character at a time adn edit.
Best Regards!

+1
Best Regards,
Pawel Kuc

I am using the pattern stamp tool. when i select my pattern it adds a hatching to teh source pattern and copies that hatching to the destination image

I am using the pattern stamp tool. when i select my pattern it adds a hatching to the source pattern and copies that hatching to the destination image

Please post screenshots to illustrate what you are talking about.

I want to get rid of the Bing screen but there is no "menu at the top of the Firefox window" for me to "select Tools and then select the Add-ons menu item. "

I suddenly have a "Bing" screen when I sign onto Firefox---and I want to get rid of it. The support section of Firefox says
1. "From the menu at the top of the Firefox window, seledt Tools and then select the Add-ons menu item."---but I see no "menu item" nor Tools, much less Add-ons.
2. "In the Add-ons window, click on the Extensions panel."---but how do I find the Add-ons window?
3. Find the Bing Bar and Search Helper Extension in the list and click Disable for each of them."---but what and where exactly is that?
At the top of the screen is only a Yahoo icon on the left and to the right of it a search box, "Web Search,", "My Apps," Yellow Pages," "Weather," "Updates," and "Skype." to the right of those there is a green cross saying "Add more apps. to your toolbar" and to the right of that a sort of gear shift looking icon saying "toobar settings."
So, in short, how do I get rid of the Bing screen and how do I access those Tools?
Thanks.

To get rid of Bing Search Window..............
Click on View tab / Tools and un-check 'Search' (alias for 'Bing')

[JS CS3] Frontmost document/selection when other with same name?

I have a few scripts used to perform various operations on the current selection in InDesign. Under normal circumstances these work fine, but I can't seem to reliably get the frontmost document/selection when there is another document open with the same name. Most references to the document and every reference to the selection I have tried so far will simply lead to the document which was most recently opened (and has the same name).
app.activeDocument.fullName always return the path to the most recently opened document of the same name, but app.documents[0].fullName will return the correct path. Trying to get the selection though will always return the selection of the most recently opened document of the same name, regardless of whether I try app.selection, app.activeDocument.selection or app.documents[0].selection. I have also tried with getElements()[0] appended to the document reference but it makes no difference.
My primary environment is still CS3 and the problem appears to be that it only references documents by name. Brief testing with CS5 indicates this has been solved by Adobe, presumably because it now refers to documents using an id by default. Haven't tried CS4 but since its document object does not have an id property I'd assume it will behave the same as CS3. Is there any way around this, or is the best I can do to detect the issue (a simple app.activeDocument != app.documents[0] comparison seems to work reliably) and refuse to run if encountered?

Welll...chances are the selected item will not be a valid ID in both documents of the same name. (I don't think ID's are globally unique, so that's not a guarantee -- but it's something you can check and only give an error if it happens to be that there is a collison).
So, get the transaction specifier of the selection:
app.activeWindow.selection[0].toSpecifier()
Result: /document[@name="u1.indd"]//text-frame[@id=211]
Then, iterate over app.documents to find the indexes of the documents with that name.
In my test, of course it is just zero and one.
Then, try to resolve the specifiers against those documents:
resolve("/document[0]//text-frame[@id=211]")
Result: [object TextFrame]
resolve("/document[1]//text-frame[@id=211]")
Error: Object is invalid
Since only doc 0 has a textFrame with id 211, you know it's doc 0 and you have a valid specifier.
I chose to adjust the specifier by hand, because I think that's probably the most general. The other choice would be to call app.documents[0].textFrames.itemByID(211), but then you would need to map "text-frame" to "textFrames" and that seems annoying and errorprone.

Invoice Plan Run T.code MRIS : Message getting - No documents selected

Dear All Experts,
Very Good Morning !
I am configuring Invoice Plan for my periodic invoicing requirement, While I am referring this these threads found on our forum SDN.
1 ) [Invoice Plan|Invoicing plan; - Post
2 ) [Invoice Plan in SAP|http://wiki.sdn.sap.com/wiki/display/HOME/InvoicingPlanin+SAP] - Wiki
I am following as per the experts replies mention in it and finally running MRIS for the same, I am getting below message after execution :
No documents selected
Message no. M8702
Diagnosis
There are no documents that comply with your selection criteria.
Procedure
You can enter new selection criteria or exit processing.
Steps I produce for this scenario :
For PO :
1 ) Selected FO in ME21N / Enterted validity period in time frames 01.11.2011 to 30.12.2012 ( DD.MM.YYYY)
3 ) Created account assignment PO with K, Tax code V0 entered.
4 ) Item Details - Invoice Tab : Inv. Receipt - TICKED. ERS - TICKED.
5 ) Item Details - Delivery Tab : Goods Receipt - TICKED GR Non - Valuated - TICKED
6 ) Item Details - Invoice Tab : Invoice Plan is selected - 10 ( Standard SAP )
For Vendor Master : XK02
1 ) GR Based Inv Verification - Not Ticked.
2 ) AutoEvalGRSetmt. Del - TICKED
3 ) AutoEvalGRSetmt. Rel - TICKED
After all this running MRIS I am getting message " No documents selected ".
Apart all these settings have I missed anything here to configure ?
Experts guidance / inputs / comments will be very helpful.
Regards,
Revati Joshi.

Dear redriver,
I tried as you guided, and saved the condition type INS. And run MRIS still no luck.
I tried with selection & unselecting of Test Run. It is giving me same result.
Let me produce the vendor master XK02 details for purchase organization :
1 ) GR- Based Inv Verfi. - TICKED.
2 ) Auto Eval GRsetmt Del - TICKED.
3 ) Auto Eval GRsetmt Ret - UNTICKED
In PO :
Delivery Tab :
1 ) Goods Receipt - TICKED.
2 ) GR Non - Valuated - TICKED
Invoice Tab :
1 ) Inv. Receipt - TICKED
2 ) ERS - TICKED.
3 ) Tax Code - V0 Assigned.
4 ) Invoice Plan : Invoice Plan Tpe 10 is selected as a Sample periodic invoice plan.
Anything else need to check ? Thank you quick replies.
Regards,
Revati Jsohi.

Text touch-up tool in Acrobat 9 not working

Does anyone know if this is a glich in CS4 or if I'm doing something wrong. When I click on the text touch up tool in Acrobat 9 (comes with CS4), nothing happens. The arrow doesn't change into a text tool so there's no way to fix text in a PDF.

Do you have text, or a picture of text? If you take the tool over text it should change to an Ibar. If you hold down the ctrl key and place the cursor, you should get an Ibar waiting for you to enter text at that location. If it is simply a graphic, you will only get an arrow.

Help! can adobe acrobat X pro. Cannot edit a pdf. watched videos, followed directions, nothing. Tried tools, edit document text, recognize text, then tried even to change font, nothing.

help! I have adobe acrobat X pro. Cannot edit a pdf. watched videos, followed directions, nothing. Tried tools, edit document text, recognize text, then tried even to change font, nothing.

This is the Reader forum. The Acrobat one is here: Acrobat

Touch up tool - Full document selection

Similar Messages

Maybe you are looking for