Touch up tool stops working

Hello everyone.
Strangest thing keeps happening to me. From time to time the touch up tool simply doesn't work on some photo's. If I try a different photo it is fine. Go back to the one it didn't work on, and it still doesn't work. But, if I clone the photo using "duplicate version from master" it starts working on the duplicated version.
Using version 2.12. Anyone else experience this?

/bump
Really? No one else has seen this problem?

Similar Messages

My daughters imessage on her ipod touch has just stopped working - to get it going again I reset it with my email address but this doesn't allow her to send messages to any of her contacts. When I try and put her email back in it says it can't verify it

My daughters imessage & face time on her ipod touch has suddenly stopped working. The only way i could get it going again was to reset it up with my email address. This will not allow her to send messages to any of her contacts in her addess book. I have tried to set up her email (which she previously used successfully) but it will not allow this it states 'unable to verify email because it is already in use' - anyone any ideas its is driving me mad !!

Try here:
iOS: FaceTime is 'Unable to verify email because it is in use'

The speakers on my iPod Touch 2nd generation stopped working.

The speakers on my iPod Touch 2nd generation stopped working. The volume doesn't even register - can't turn it up or down. On occasion the headphones will work when plugged in. Turned it off and on, tried reset, nothing works. I bought it second hand so no AppleCare. What can I do?

Try restoring the iPod via iTunes on your computer. First from backup and if problem persists restore to factory defaults/new iPod.

Suddenly in the middle of editing a large project the cropping and other tools stopped working. Did i hit some key or something accidently?

suddenly in the middle of editing a large project in Aperture the cropping and others tools stopped working. Did I accidently hit something to do that?

Maybe you hit the "p" key?
Then "Quick Preview" will be turned on and prevent editing. Hit "p" again or use the "View" ->"Quick Preview" menu entry.

Hi I was using my iPhone 4s like normal and all of a sudden my touch has completely stopped working I have resettled my iPhone numerous times I don't know what to do ?

My iPhone 4s touch has completely stopped working resettled numorous times still won't work

In iTunes, select iTunes Store under STORE, scroll to the bottom and change the flag (bottom right) to the country where you are.

Hand tool stops working in Flash CS5

Does anyone know why my hand tool stops working after some time? Whenever I restart Flash, it works, but after like 30 minutes working, it just won't work. The hand tool symbol appears, with the shortcut key, the space bar, and the button on my pen as well, but it won't drag it at all.
I have to restart it every time, and its getting annoying.
I have a
Intel Core i7-2600k @3.40GHz
Windows 7 64-bit
8 GB Ram
1TB Space
Everything works fine, is just that hand tool issue.
Any help is appreciated.
Thank you.
P.S. First time I've posted, maybe wrong forum section.

Hi ,
Yes for the brush tool , we just have the fill color. Snapshot attached -
Let me know what do you want to achieve using the brush tool so that I can suggest you some other tool to be used for the requirement.
Thanks and regards,
Sudeshna Sarkar
Adobe Flash Professional Team.

Touch gestures feature stopped working/disappeared two days ago

I use Photoshop CC on a Surface Pro, and actively use touch gestures experimental feature as part of my workflow. Two days ago, the feature all of the sudden stopped working. I went into Settings, and it's no longer even listed under experimental settings, only the screen scaling and the printing features, two instead of the three that should be there.
Is this something that went away with a recent update (I hope not!), or am I dealing with another issue? How do I get it back? This is seriously impairing my workflow.
Thanks for any help!

Seili010 - Adobe has mentioned that the Touch features are now part of the base Photoshop CC 2014 so no need to turn them on.
HOWEVER
I am running the same setup on my Surface Pro 2 (Win 8.1) and my touch features have stopped working as well. I also have a Surface Pro 1 (Win 8.1) that my backup copy of Photoshop CC 2014 is installed on and the touch features work fine.

Help!!!! clone stamp and healing brush tool stopped working suddenly

Help!!!! clone stamp and healing brush tool stopped working suddenly

What are the Tools’ Blend Mode, Opacity and Flow (see Options Bar)?
Could you please post a screenshot with the pertinent Panels visible?
Have you tried resetting the Tools?
Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

-Why did my CS2 Dodge Tool stop working as set?

CS2 dodge tool stopped working as set, yet Burn, Sponge, Clone Tools all work; dodge tool leaves centered white specks if clicked multiple times; all my CS1 tools work; all my CS2 & CS1 tool settings are same (0 hardness, 20% exposure), rebooting does not fix; can anyone help? Is it possible to create this problem by accidentally typing Shift, Alt or Ctrl "," or "." or similar whilst using CS2 Dodge Tool? Thanks in advance!

It's probably something to do with the tool's brush. If picking a brush preset (not just a brush tip) doesn't fix it then reset the Dodge Tool. Right-click on the tool's icon at very left of Options bar and pick Reset Tool.

TS3274 why would touch screen just stop working?

The touch screen just stopped working, it is charged, can not turn off, can't do anything with screen. Has anyone else had this problem and any suggestions
as to how to fix. Thanks in advance

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Hand tool stops working randomly (CS6)

Hi,
So I'm working on this composition with a lot of 3d layers. Sometimes when I switch views, the hand tool stops working completely, for no apparent reason. I hit space, the hand icon still shows, but nothing happens when I drag the cursor. Then after a while it starts working again, for no apparent reason either. It's driving me nuts.
I've already tried resetting the preferences, to no avail.
My specs :
i5-3330 @ 3.00GHz
6 gigs of RAM
NVIDIA GeForce GT 620
1 To HDD
Windows 8

Could be a cache issue or your graphics card not flushing its buffers. Turn off the performance cache in the prefs and update your graphics driver....
Mylenium

I have and ipod touch 4g, it stop working out of nothing, tried everything..

i have and ipod touch 4g, it stop working out of nothing, i tried to restore, i plugged in to another computer and to the outlet wall and nothing, didnt drop it or got wet, someone told me that it happens sometimes with this ipod generation. what can i do? i bought it to years ago.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My Snipping Tool stopped working

My Snipping Tool stopped working.
When I open the tool I get a box with a Circle/line and OK.

Hi,
Did you launch it via a shortcut?
Try to open it via original application:
1. Open C://Windows/System32 directory;
2. Find SnippingTool.exe as the figure below:
3. Double click to open it to check the result.
If it works fine, remove the old shortcut and then recreate a new one.
Karen Hu
TechNet Community Support

Spot Healing Brush Tool stops working in CS6 on Mac

Hello:
Just wondering if anyone else has experienced this. While working in the Spot Healing Brush Tool in CS6 on my iMac (Mountain Lion) , the tool stops working. I use it a few times on a busy BG, and then it goes away. The brush turns to a cross, and the tool no longer works. Reseting the tool, or All Tools, does not fix the problem.
Please let me know if there is a fix for this problem.
Thanks,
Richard

BTW:
This is also hapenning when I use the Patch tool. It "Eventually" comes back, but I loose it again after a fix or two. Can't figure this one out. Need help.
Richard

Pro L10: After using a wireless mouse, the touch pad has stopped working

Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. On start up the touch pad icon shows and the touch pad operates intermittently, after a few minuets the icon disappears and the touch pad stops functioning. In the control panel/mouse & or device drive I can the program operating and then disappears.
I have removed the software and reinstalled to no avail. On occasions I get a message to say that another pointer is in operation.
Can you help?

Hi
It seems that the wireless mouse or the wireless mouse drivers/software has a bad influence on the touchpad.
I dont have a proper solution for this issue. Well, you can check the Toshiba driver page for newest driver updates. If the updates doesnt solve this issue so I suggest to use either the wireless mouse and disable the touchpad with the key combination FN+F9 or to use a common USB mouse.
I assume that you dont have any problems with a common USB mouse.

Touch up tool stops working

Similar Messages

Maybe you are looking for