Touch Volume Control

Hi..I got a little problem on the touch volume control when i'm using the ipod. I tried to adjust the volume(increase or decrease) but the blue dot always goes back to its place..(No problem with the volume control on the side..)can somebody advise me what to do..thanks in advance..

Try just resetting the phone...hold the Home and Slep button and continue holding them after the slider appears on-screen, until the phone switches off.
Then switch back on with the top button again. That should sort it

Similar Messages

ITouch 1st gen OS 3.1.2 - missing touch volume control

Does anyone know if apple has made it possible to upgrade the 1st gen iTouch to OS 3.1.2 without losing the volume controls? I have read some people saying that they are missing volume controls and others just forgot to plug in their headphones. Does the iTouch volume control work on a 1st gen? I really hope that I don't have to upgrade hardware to get the new OS. Any help would be appreciated. Also, is it possible to downgrade firmware to a version that supports touch volume, if it's necessary?

I tried restarting my iPod Touch by holding down the top button until it gives the option to power off. This didn't seem to help, as there was still "no volume available", however, when I moved the iPod Touch from the dock and plugged the jack directly into the port, the volume control reappeared immediately, and when I moved it back to the dock, it stayed present and is still there now. Earlier today, when I used my headphones, there was also "no volume available", so perhaps power cycling did help?

1st Gen IPod Touch Volume Controls won't come up after a few minutes

I've got a first gen IPod touch and ever since I upgraded to the OS 3 family I've had a problem where after a few minutes of playing a video, if I tap the screen to bring up the volume controls, nothing happens. If I tap the screen in the first few minutes, the controls come up fine but after a few minutes a screen tap does nothing. Returning to the home screen and re-launching the video player didn't work either. I was turning the unit off and back on to correct the problem but after reading that a new "feature" of OS 3 pertained to volume control and headphone detection I tried a new tactic. When the volume controls would not display, I unplugged my headphones (the video paused when I did this) and plugged the headphones back in and the volume controls display auto-magically and would appear on with a screen tap for a few minutes then I was back in the same situation. Is there anyway a setting could be created to disable headphone detection and the "features" that it brings? The headphones work fine when the volume controls won't display so it doesn't feel like a headphone problem. Thanks.

To The Apple Discussion Boards!
Except for your keyboard & mouse, disconnect all devices from your computer & repair disk & permissions from your Tiger DVD.
Repairing permissions from the Tiger DVD
Boot up from your Tiger Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
Once this process has been completed restart your computer.
http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature

Ipod touch volume control

volume control stuck/ not working...nothing recently changed any suggestions? I'm not tech savvy, am at work and son texed me about this prob with his IPOD. He's a bit challenged.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

G560 Feather Touch Volume Control Problem

I have this laptop Lenovo G560 and the volume control option in the right to hand corner which has 4 buttons blinks itself and the volume controls automatically goes up and down and itself gets mutted again.
I am tired of this so I want to disable those commands of volume up and down and mute option.
I heard there is some kind of registry edit option.
Can someone help me in this?

No yet dear, but I have figured out one thing and that is when the laptop gets heaten up it starts blinking.
When you are in a AC room and the laptops temperature is normal at that time its perfect but when I bring it outside it starts blinking again.

Ipod Touch Volume control's decreasing by itself

Ive just started to have a problem where the volume decreases right down to zero, when i try and slide it up it simply slides all teh wya back down! help please!!!!!!!!!!

Odd problems like this are often resolved by Resetting or Restoring (which erases the Touch and puts the OS back on). If that doesn't fix it, try Restoring again but do not re-load your last backup (i.e. set it up as a new iPod).

2G Touch: Music is far too loud. Volume controls don't work.

My Touch is very new and it looks like there is stuff I don't understand yet.
When I play my music, any track, it's way too loud and is injurious to hearing.
I have slid the volume slider all the way to the left. No result. The slider does nothing.
I have used the volume buttons on the left of the Touch. No effect. Way too loud.
I have used the Volume Limiter in Settings>Music. It's all the way to the left. No effect.
Clearly the Touch must not be used to listen to music until I get my volume control working.
"Reset all settings" has no effect on the volume problem.
Any Suggestions?

OMG! Found it. Very unintuitive.
The Touch volume controls do not work if the 'Pod is sat in the Apple Universal Cradle. I was using the cradle without the USB cable.
That makes little sense to me.

Touch volume freezing and preventing all other keystroke commands from working

Hello
I have an HP pavilion DV4-1514 laptop running windows 7 64 bit. The touch volume control gets stuck all the way at zero and continues to display on the screen. The main problem is when this is displayed it prevents all other computer functions from working. You cant click on any other windows or start any programs because the touch screen keeps displaying front and center. How do i disable the touch volume

Welcome to the forum, Cliff -
You could try reloading your Audio driver (6.10.6225.0 A):
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45211.exe
Now, if that doesn't kick that driver, there are ways to force it a bit. You can get to it from the Device Manager.
For reference - your HP sorftware and driver webpage:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4072...
I hope this helps!
Click The Kudos for Thanks!
Click Accept as Solution if it's Fixed!
Kudos are Earned!
Kind Regards,
Dragon-Fur

The volume control on my ipod touch 4th Gen is gone,what should I do?

It just happen to me lately, so as I open the music while my earhones are plugged,I saw that there is no volume control on my screen but the song is still playing but I can't hear anything so I remove my earphones then I plugged it again then the volume controls show. I have to do this all over again just to listen to my songs. Also,when I try to play it on loudspeaker,the volume control is missing again. I already restore my ipod but it is still the same. My OS is up to date so my itunes are. what should I do? Does somebody experiencing the same? Somebody help. Thanks

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Ipod touch 1st Gen, no volume control after update to 3.1.2

So i just upgraded my ipod touch to 3.1.2 which cost about $6, and the volume control is missing( even with the headphones plugged in).
How can i fix this? i dont want to do a restore and not have the firmware i just paid for.

The recovery at a XP-PC was successful! So it's clearly a driver issue.
For he ones who have a similar problem, but without the two "Recovery Mode - Devices" in the device manager, I had this problem, too. But it was easier to solve.
Look for your iPod in the device manager. It can be found in "Portable devices". Let your Windows (even 7) update the driver online. That helped in my case. But only till I tried the firmware update... :-/
So be careful! If you want to update the software of your iPod Touch or iPhone, too, I think, on a Windows 7 machine, make sure, that you have another PC with an older OS in reach!
I hope I could help somebody till Apple releases some compatible drivers...
Bye, folks.
Sascha from Germany

Ipod Touch Gen 1 and 3.1.3 volume control

Im pretty annoyed at the latest firmware upgrade, the completely removes onscreen volume control. and the ipod touch 1st generation has no side buttons for it, making this now impossible for me to change without going into an app that has volume in it.
Before it was bad enough because I could not double click my button to enter the volume control/song change quick menu unless music was already playing, but I got around it.
I'm pretty disappointed with apples lack of support for earlier versions. Not only that, but I can find absolutely no feedback forms for anything other than itunes and the website.

I seem to recall that this issue only exists when there is nothing plugged into the headphone jack -- if you plug something in then you should have volume control. I guess the problem would be if you use an FM transmitter, is that the case?

Updated ipod touch 3G to ios 5.0.1 and only have volume control with headphones doesnt work in bose dock anymore

I just updated my 3G ipod touch to ios 5.0.1 and lost volume control except when headphones are used, it will no longer work in my speaker dock, any suggestions?

- iOS 5 seems to have messed up connecting with Bose docks:
Re: iPhone 4 upgraded to iOS5, now Bose SoundDock not working
- Have you tried the standard fixes
--- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
--- Restore from backup
--- Restore to factory defaults/new iPod

My ipod touch thinks headsets are plugged in as indicated when pressing volume control. We did a reset but that did not work. What is next?

My ipod touch thinks headsets are plugged in as indicated when pressing volume control. We did a reset but that did not work. What is next?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

G530 Touch sensitive volume control panel

After a quick reformat of my G530, the touch sensitive volume control panel (four black circular buttons in the upper right part above the keyboard) still works but the volume up/down buttons are in slow increments of 2% whereas before blue rectangular sound bars showed up on the screen when pressed and the sound increased by increments of 10%.
Where can I find the drivers for the touch sensitive volume control panel? I've looked everywhere but can't find them.
Any assistance would be greatly appreciated.
Lenovo G530 4446-35U
Conexant High Definition SmartAudio 221
V. 4.55.0.0
Solved!
Go to Solution.

try to re-install power management from here

Is the Ipod Touch power button also a volume control?

Ever since I got my iPod Touch, whenever I press the power button, the volume goes up one level. I never thought anything of it until I started wanting to take screen shots and the volume control icon ends up in the picture, which is REALLY annoying and no one else seems to know why. I read around under apple support and in discussions, and no one else seems to have this problem. Is this normal? And how can I fix it?
I added a screen shot that I took on my iPod Touch so you know what I mean by volume control icon.

No it is not

Touch Volume Control

Similar Messages

Maybe you are looking for