Touchpaad dual finger scrolling is not working

i have hp 15-d107kx i had installed the drivers but it is not working smoothly and also the dual finger touch scrolling is not working properly...... what should i do now...........

Shanks_Jd wrote:
i have hp 15-d107kx i had installed the drivers but it is not working smoothly and also the dual finger touch scrolling is not working properly...... what should i do now...........
Hi Shanks_Jd
Please give your following details: Operating system & 32 or 64-bit?
Hope the model you are having is HP 15-d103 Notebook PC. Hope you have downloaded the latest Synaptics Touchpad driver from your HP product website.
Go to: Troubleshoot your touchpad and follow the steps given there.
Go through HP Notebook PCs - Using and Troubleshooting the TouchPad or ClickPad specifically.
Also, check whether 2-finger scrolling is enabled in Synaptics touchpad controls:
Go to Control Panel --> Hardware & Sound --> Synaptics Touchpad icon below
It'll open Propeties of Synaptics touchpad window.
Enable Multi-finger gestures, Two-finger scrolling & Scrolling by checking mark them. Click Apply, OK.
Restart the system.
Hope this resolves your issue
Thanks
Visruth
*CLICK "ACCEPT AS SOLUTION" TO HELP OTHERS WITH THE SAME PROBLEM*
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

My two finger scroll is not working

My two finger scroll does not work on Firef

hey natchilds, try to switch off smooth scrolling in preferences > advanced > general

Two finger scrolling does not work on my MacBook (late 2008)

Two finger scrolling does not work on my MacBook (late 2008) with either the notebook trackpad or a b/t conected magic trackpad. Yes, I've set system preferences. Suspect a driver or s/w problem. Ideas?

Saw another post that hinted that you need to go to accessibility settings:
System Preferences > UniversalAccess > Mouse & Trackpad > Trackpad Options
Enable scrolling (and I enabled dragging while I was at it and it worked. Looks like wierd things can get set even if you don't mean it to.

MB Air two finger scroll does not work for a user but does for another

Hi
MB Air. 10.9.3.
Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
Tried this in Terminal:
defaults write -g com.apple.trackpad.scrollBehavior 2
Any ideas?

This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

Two finger scrolling does not work ONLY on Firefox

This just started today, suddenly my two finger scrolling doesn't work but only when I'm in Firefox, offline and on Safari and Chrome it's fine. Restarting Firefox only fixes it for a few minutes, then it stops working again. All of the suggestions I've found that I've tried haven't worked, please if anyone could help and also break it down fairly easily, I'd really appreciate it.

''guigs2 [[#answer-674567|said]]''
<blockquote>
Does this happen in Safe Mode?
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
:[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
</blockquote>
The same issue happens on Firefox 35.0 running in safe mode, Mavericks 10.9.5, both with Magic Mouse and normal standard mouse...
It's unbeliaveble this issue is going on since more than one year ago, I can find people complaining about it since December 2013!
Oh, one more thing: I don't have a two finger swipe configuration, I have single finger swipe, so the actual problem is about scrolling the page in itself (considering I've tested it with a normal standard mouse as well....).

Satellite C50-B-14D - Two finger scroll is not working

I have had my laptop for about 6 months now and am generally happy with it. However, the two finger scroll has stopped working (it was working fine when I got it and for a while after). I know it's not essential, but it makes such a difference for the work I end up having to do, which often involves copying and pasting etc, and I really miss it!
I've read many threads saying that you should go to Control Panel, click on Mouse and go to device settings. However when I get to that point, my Mouse box just says "buttons; pointers; pointer options; hardware" and there is no "device settings" panel along the top. What can I do? I also can't find the synaptics driver anywhere to uninstall it, as some other people have suggested.

Obviously this additional touchpad feature isn’t available because the touchpad driver isn’t installed.
I recommend you to visit the Toshiba EU driver page and to download the touchpad driver for this notebook model.
I’m not quite sure what touchpad module this notebook supports (Synaptics or ELAN) but I think you could try to check both drivers.
If one would not work, check the other one…
After that you should see the additional tab within control panel -> mouse

Two finger scrolling does not work on Synaptics touchpad + clicking problems in web browsers

Hello, Since yesterday, i have problems with my synaptics touchpad on my HP Elitebook 8570w.The two finger scrolling and scrolling at the edge of the pad does not work.Also in google Chrome, all the links open in a new tab and when i try to click the new tab, it closes (normally that is the action when i click it with the middle touchpad button) Even in the practice mode of the synaptics settings of the touchpad, the two finger scrolling and edge scrolling does not work. Both options are enabled in the settings. I already tried to roll back the driver and reinstall the driver, without any effect.I expect the problem is the touchpad or the buttons itself. Is there a way to test the buttons and touch pad? How can i solve this problem? please help me sincerely, Karel

I would try installing the Windows 8.1 (64-bit) Synaptics touchpad driver available in your sleekbook's web support download section before using compatibility mode. Try the available earlier versions if the current driver does not work for you.
If you still do not have positive results, then use compatibility mode (choose Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most current one.
To use compatibility mode to install the driver softpaq just right click on the file and choose troubleshoot compatibility. Choose Windows 8 and run the installer.
The following video has a decent explanation, but the narrator does not get to the point for a bit. Skip forward to minute 4 and watch it from there.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Two finger scroll down not working on touchpad

Hi,
The two finger scroll function on the touchpad is not working.
The driver is updated as well.
Overall the touchpad seems unresponsive as well. It gets stuck and cursor stops moving. It is the only thing that I am not happy with regarding the spectre x360.
Can you please help.
Thanks

Hello @ukx360 ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Spectre x360 Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad, you will see a restore defaults button. If you select that it will restore the original settings.
Hope this fixes things up.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My two finger scrolling is not working for my hp envy 4 1017nr

my hp envy 4 1017nr touchpad has stopped responding. the tapping , two finger scolling and edge scrolling has all become non responsive. I have reinstalled the synaptics driver but the problem still persists.

Hi abbhey,
Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Trackpad scroll function not working in any app - tried everything

Hello.
This is my 1st time writing in the forums, and although I have read multiple threads on this issue, nothing has yet solved my problem, including: http://support.apple.com/kb/TS1248, & http://support.apple.com/kb/TS1449. SO ANY HELP IS WELCOME! I have a mid-2010 MBP 13" intel-based dual core with Mavericks OSX 10.9.1 installed already a couple of months now. As of last night, my two-finger scroll does not function in any app. It is the ONLY function on my trackpad that does not work. I have tried changing all scroll preferences, restarting the browser (firefox 27.0.1) & computer, as well as opening Preview app 7.0 to see if it affects other apps as well. It does not work even in Finder. I looked in the permissions section of my apps by right-clicking on "get info" & there seems to be a discrepancy between the default users and their permissions. I am wondering if this is perhaps the problem and can be reset somehow to default settings or if there is a terminal command that can reset the trackpad (like the PC function in the device manager of the control panel, diagnose/repair)? I have a screen shot of the different users/permissions that I can send/post you if necessary, but you'll have to explain me how to do this, as this is my 1st post. Thank-you!

So whoever falls on this issue, I have visited the Apple Genius Bar today & this is what finally solved my problems:
1. We created a TEST guest account in System Preferences to find out if it was a user-specific related problem, and it was as the 2-finger scroll function was working in the new user account. I was told this means that the problem is due to a setting that was recently added/deleted/changed.
2. We deleted the new user account.
3. We deleted the entire user library folder (except the Mail folder), as that is where all preferences are apparently stored.
4. VOILA! 2-finger scrolling now functions as was intended (only all settings must now be recreated).
It is tedious, but at least everything functions as normal & nothing needs to be backed up!
Hope if anyone else has had this problem, they find this post.
Cheers,
Leo

Magic Trackpad - 2 finger scrolling has stopped working in Mac Mail - works in Safari

Hi,
I've been happily using a Magic Trackpad for a couple of years but just recently the two finger scrolling has stopped working in Mac Mail. It still works fine in other apps eg Safari so this seems like a very odd problem ie I can't imagine you can configure it to work in one app and not another! Any suggestions?
Thanks,
Rob

Thank you merleau. I had the very same problem and found your solution perfect. This helped me tremedously.

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Scroll is not working when results seen trhu SP01.

Hi all,
I have observed an issue , in one of mine report, when I see list using SP01 spool list , Scroll is not working.
I have used SET LEFT SCROLL-BOUNDARY . It is working if i run this report in Foreground.. but my need is to schedule that report, and see the results thru SP01. using SP01 Freezing is not working.
Any one have any idea about this, please do help me out.
Thanks in Advance.

Hi,
None of the interactive functions will work once the output is on the static spool.
Regards,
Darren

HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro

My HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro.
In device manager showing that biometric reader is working properly. But actually the finger printer reader is not reading or senseing. It seems like "dummy" part. Please help me to correctly configure step by step for this issue.
thankyou
Hillet
This question was solved.
View Solution.

Have you installed the Validity Sensor Fingerprint driver software for Windows 8.1?
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943811&swItemId=ob_134806_1&swEnvOid=415...
See page 64 in the following Windows 8.1 user manual for Validity Fingerprint setup information
http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=6943810&docId=emr_na-c04371762&docLocale...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

Touchpaad dual finger scrolling is not working

Similar Messages

Maybe you are looking for