Touchpad and CD-Boot issues since 10.5.6

Hello *,
since I updated to 10.5.6. I am having strange problems. I have to deactivate the touch pad, otherwise, when I use it, the left mouse button functionality *also of the USB or MightiMouse* is not working anymore. Second problem: no boot from CD via pressing and holding c or d anymore. I can hold option and select the boot device, but I can not run e.g. the hardware test tool from the original installation cd and I also can not reinstall firmware - cd will be ejected. The problem was even worser, but after all kinds of troubleshooting - this is the current status. I reset PRAM and SMC several times, I reinstalled 10.5.6 combo update 2 times. I reinstalled from Leopard CD, I installed from TimeMachine Backup. I assume that something is wrong with my firmware / EFI since the update but there is no possibility to fail back or reinstall, because I can not boot from cd with c or for firmware upgrade via holding down power button. I have no idea what else I could try. Any tips?

I checked already, and there is no cable problem. The prove for this is also that it works for a short time under certain conditions. Then it looks like touchpad starts to send endless left-clicks, which blocks other left-clicks. Disabling the touch pad let me use my mighty mouse, which is also bad, because I usually never use it with my MacBook. If you disable it in system preferences, using your keyboard (which is a pain when you are not used to it - also check if keyboard-mouse is enabled) - you should be able to use a external mouse device. I read somewhere that booting into hardware-test tool can solve the problem. Unfortunately I'm not able to try this, because boot with 'd' or 'c' does not work (fortunately booting with alt and choosing the boot device works, but this does not allow you to start hardware-test.) It would be good to know if there is another possibility to start hardware-test or even better - to flash EFI. Even this does not work (holding down powerbutton during start up with inserted EFI-CD) - the CD will be ejected without any effect. Very strange...
BTW: I searched the web about this issue too, and I saw many other people having similiar problem with all kind of Macs with booting from cd, or problem with left mouse - even in this forum. Does not look like a pure MacBook problem for me...
Message was edited by: 23r0

Similar Messages

[SOLVED] systemd 207, lvm2 and luks booting issue

Hi
i'm using an encrypted lvm (luks) on my notebook.
/boot on /dev/sda1
lvm on /dev/sda2
main-root
main-home
main-swap
since the systemd 207 upgrade i am unable to boot my system.
this error appears at startup:
A start job is running for dev-mapper-main\x2droot.device
so i'm guessing that systemd is unable to use the encrypted lvm2, since this error is aknowledged on the
after checking some threads i tried:
mkinitcpio -p linux
but there was no effect.
HOOKS="base systemd autodetect block keymap encrypt lvm2 filesystems fsck vbox
some people tried suggesting downgrading to systemd 204 but i dont have any pkg file and building with abs leads to the following error
while makepkg -s:
==> Starting prepare()...
patching file src/core/swap.c
Hunk #1 FAILED at 220.
1 out of 1 hunk FAILED -- saving rejects to file src/core/swap.c.rej
==> ERROR: A failure occured in prepare().
Aborting...
am i supposed to remove the patches from the build? i'm not really sure and more of a beginner in this area.
Can anyone help me solve either the build or the boot issue ?
i should mention that i am only able to access my system by using chroot from an arch boot stick.
Thank you so much.
Kind Regards
Last edited by ziv667 (2013-10-01 11:27:06)

https://wiki.archlinux.org/index.php/Mk … mmon_hooks
systemd: This will install a basic systemd setup in your initramfs, and is meant to replace the 'base', 'usr', 'udev' and 'timestamp' hooks. Other hooks (like encryption) would need to be ported, and may not work as intended. As of systemd 207, this hook does not work as intended when combined with lvm2 and may break your boot. You also may wish to still include the 'base' hook (before this hook) to ensure that a rescue shell exists on your initramfs.
Have you tried keeping udev instead of replacing it with systemd hook?
Have you tried https://wiki.archlinux.org/index.php/Ar … ck_Machine ? It has systemd 204.
Last edited by karol (2013-10-01 11:16:57)

H87M-G43 and automatic boot issues

I have an H87M-G43 and for 4 weeks have been struggling to get a new clean Windows 8.1 UEFI build on the PC without odd automatic boot issues.
Here is the PC configuration:
CPU Intel Core i5-4440 3.1GHz
PSU Corsair CX430
DIMM1:
DIMM2: Corsair XMS3 DDR3 4GB CMX4GX3M1A1333C9
DIMM3:
DIMM4: Corsair XMS3 DDR3 4GB CMX4GX3M1A1333C9
SATA Port 1: SSD Samsung 840 EVO 120GB
SATA Port 2:
SATA Port 3: HDD Samsung 1TB SATA II
SATA Port 4: HDD Samsung 1TB SATA II
SATA Port 5: DVD Liteon IHAS124-14 24X
SATA Port 6:
JAUD1: Coolermaster 352 Series Case Front I/O Intel HD Audio connector
JUSB1: Coolermaster 352 Series Case Front I/O USB 2.0 connector
JUSB4: Coolermaster 352 Series Case Front I/O USB 3.0 connector
BIOS v1.6:
01. F6 Restore Defaults: Load Optimized Defaults
02. SATA Mode: [RAID Mode]
03. SATA3 Hot Plug: Enabled
04. SATA4 Hot Plug: Enabled
05. Initiate Graphics Adapter: IGD
06. Serial(COM) Port 0: Disabled
07. Parallel(LPT) Port: Disabled
08. Windows 8/8.1 Feature: Enabled
09. Resume From S3/S4/S5 by USB Device: Enabled
10. GO2BIOS: Enabled
SATA Port 3+4 RAID1 (Mirror)
Windows 8.1 UEFI installation
Install Windows Update:
1. Important Updates
2. Recommended Updates
3. Optional Updates
Install MSI Drivers/Software:
01. Intel Chipset Driver 9.4.0.1026
02. Intel SVGA Driver 10.18.10.3412
03. Realtek PCIE Network Drivers 8.23.11.26.2013
04. Intel RAID Driver 12.9.0.1001
05. Realtek HD Audio Drivers 6.0.1.7111
06. MSI Wallpaper
07. Intel AMT Driver 9.5.15.1730
08. Intel SBA 2.2.39.7991
09. Intel Smart Connect Technology 4.2.40.2418
10. Super Charger 1.2.020
I have not configured any of the Intel Management and Security, Small Business Advantage, Smart Connect software, just installed them.
The issues I get are:
1. JUSB1 connected and Resume From S3/S4/S5 by USB Device: Enabled in BIOS. When I shutdown the PC, it automatically boots 2-3 seconds later. If I set Resume From S3/S4/S5 by USB Device: Disabled or disconnect the JUSB1, the PC shutdown is fine.
2. Once the PC is shutdown OK, PC boots itself several hours later. Yesterday at 15:50pm PC was shutdown. At 21:18pm, PC automatically booted itself.
This is my first MSI and UEFI motherboard. What I would like is some advice on setting up the BIOS and the software to get sleep/hibernate working and no automatic boots.
I have contacted MSI regarding these issues, but they say they cannot reproduce them. I have subsequently googled these issues and of course, other MSI users are experiencing similar problems, but there are no obvious resolutions. Please can anyone help/advise?

Hi,
I have the MSI Z87-GD65 Gaming mobo and perhaps similar problem as discussed in this thread.
I wanted to be able to wake my PC from sleep mode via my USB connected mouse and keyboard. Therefore I went into BIOS and set the "Resume from S3/S4/S5 by USB Device" to "Enabled". And yes, now it is possible to wake my PC from sleep mode by just clicking any button on my keyboard or just moving my mouse a little bit. So far so good. BUT, another feature was also added which I did not want to have: By just clicking any button on my keyboard or moving my mouse a little bit the PC also started after I have "shut it down"! This could seem as the PC boot by itself but it does not, I have to move the mouse just a little bit (by accident for example when needing more space on my desk) or clicking a button on the keyboard. I THINK THE ROOT CAUSE TO THIS PROBLEM IS AS FOLLOWS: In BIOS, it says "Resume from S3/S4/S5 by USB Device". Instead it should only be "Resume from S3 by USB Device". S3 is the same as "Sleep" and S5 is the same as "Soft off" = PC shutdown. Do you understand what I mean? When I shut down my PC it is put into state “S5”. (NOTE: I have another PC with MSI Z77-GD65 and here it only says "Resume from S3 by USB Device" and no problem with any starting of that PC via USB device from a shutdown state, it only starts from the sleep state (=”S3”) as I want. How do I get rid of the "S5" state in BIOS for this USB wake up feature? (Btw "S4" is hibernate state which is not the same as a shutdown PC, therefore not causing this problem.)
ADDED No. 1: Please read msdn.microsoft.com/en-us/library/windows/desktop/aa373229(v=vs.85).aspx for explanation of the different system Power states I mention above.
ADDED No. 2: My Click BIOS version is 1.8 for Z87-GD65 with release date 2013-12-06. On a Youtube video I have seen that version 1.0 of this BIOS has Wake up "Resume from S3 by USB Device" and not ...S3/S4/S5...

MbP Boot issues since last firmware upgrade

We have about 15 MacBook Pro's at work here that have been running fine. I have about in my lab area that I do testing on. Were working on getting them managed better, but at this time it's still the users job to run updates. Last week I ran apple software update on my two local MbP and things seemed ok. This week I went to re-image them to test a new image I created and troubles began. It looked like it installed the image ok but when it went to boot - just gray Apple logo. So going by standard procedure I got the gray DVD that came with it and attempted to boot up. It gave me these beeps and the light in front came on three times. I tried our white SL DVD - same thing. So I tried to boot up the second MbP from both gray and white DVD's - same issue.
So I did further testing and it seems that while our current image doesn't work, our Lion test image did. I found this odd but figured it must have been something with the last upgrade. But since all the DVD's we have don't work we didn't really know what to do. Thankfully we got our shipment of new MbP's that came with a 10.6.7 DVD. We were able to boot up and re-image the machines ok.
So in the future, how would we know an upgrade is coming that would make our old boot DVD useless? Thankfully there wasn't any emergencies I had to handle that I was able to work on this. But this was quite and odd event even for Apple.
Anyone else have these issues?

Hello mate,
Send your laptop back to warranty.
There is a thread about the same problem with S10-3s there : http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/S10-3S-BIOS-Update-issue-gt-Recovery-procedure...
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

MSI-KN8 neo4 Plat and windows booting issues...please help!!!

let me start with my system specs:
msi- 7125 plat KN8 (1B0 bios)
amd 64 3500 venice
1 GB (2 x 512 MB) corsiar valueselect (set at 2.5V)
antec neopower 480W
gigabyte nvidia 6600gt
(2) 80 GB maxtor sata150
250 GB maxtor sata150
zalman 7700 series cpu fan
sony dvd burner.
Thanx in advance for any and all help i am, hopefully about to receive. i read quite a few of previous threads and didnt find one with my issue.
HERE GOES...
this entire system was running with a different brand mobo (just upgraded to this msi-7125) and was running great!!
however when i installed windows xp media center edition 2005, things where working great. that is until i installed the nforce system drivers from the disk that MSI provided me. once i installed the ethernet driver,ide-sw driver, network controller the ask me for a reboot after install was done, when the system restarted i got all the way the windows xp splash screen or loading screen. at that point windows stops loading stays on the loading screen for about 10 minutes, then the computer shuts off.
i have tried running memtest and had no errors, im positive that my psu is capable of handling my components.
i'm really stuck on this one, any help would great thanx again!!!
Sam

You should be able to get into Windows through safe mode. From here uninstall the drivers and restart. You should hopefully be able to get into Windows normally now. Get hold of the latest drivers from the Nvidia web site and try them.
Also check both Ethernet controllers are enabled in the BIOS.

Pc and mac gmail issues since fios installation

I have several gmail accounts. Before Fios install I received all emails into pc and mac. Now I receive some in the pc, but not in the mac and vice versa. I have to always keep the gmail server open to make sure to not miss anything.
IMAP AND POP ENABLED ON GMAIL SERVER.
IN MAC ALL ARE SET FOR POPMAIL
IN PC HAVE IMAP.ON MICROSOFT OFFICE 2003/advanced setting 995/465.
help!!

Yes it's multi-platform and you are permitted 2 installations.
If you are not in a hurry PSE11 is due soon, but in the meantime why not give the free trial for PSE10 a go.

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

Z68A-GD80 B3 Random cold boot issues

No mater if system is set to optimized defaults or Overclocked I randomly get odd boot behavior ranging from slow boots to no boots
Symptoms:
delays at post on blank screen with exception of "A2" and or "B3" displayed in the bottom right hand side of the screen.
Generally after stops looking for a floppy to boot to, which makes no sense at all there is not even a floppy header or bios option to disable.
I can have three days in a row with no boot issues at all.
Note: PC and all peripherals are connected to My Tripp Lite 1200w UPS which is connected to a dedicated 20 amp circuit with hospital grade receptacle.
I have the board speaker attached to the board to broadcast the beep codes.
When a good boot happens I hear three beeps and a final short beep all in fairly quick succession.
During a failed post the beeps come slower with a greater duration between beeps and one less beep
Sometimes it sounds like 5 beeps in total but that is with a good post 4 quick beeps and a final marginally longer beep.
Since their is no post code display with this board I'm left with wondering what these beeps mean on the Z68 boards.
Also of note the Corsair H70 CPU cooler I have attached to the mobo CPU header for the pump and the Mobo fan 2 header for the H70 fans, so I can monitor the RPMs start very slowly not unlike a jet turbine begins slowly and gradually builds momentum. I only mention this because it does not act this way on other boards I have tried the cooler. Especially when bios setting were set properly which bring me to what I have tried to resolve the situation.
I've been able to stabilize the board with OC genie and manually at 4.8, 4.7, and 4.6 MHz with 1600 and 1866 memory speeds. To be clear I consider, 20 pass max mem of LinX, 10 hrs prime 95 w/o error and 200% coverage HCI design Memtest (two instances "usable" and "all remaining") with no errors stable.
Further more I've been able to stabilize Turbo Boost at x49 1core, x48 2cores, x47 3cores and x46 4cores with little more than a Vcore adjustment away from default settings.
The issue remains intermittent cold boot issues.
I haven't had a system pass these test and have cold boot issues since the NF2 days.
What I've tried:
bumping Vcore way past minimum required to boot to any given clock down to 4.2 (1.2v)
bumping CPU I/O same as above
running at default
running at default with XMP
running default manually set RAM timings and volts
running with the above with EuP 2013 disabled
Smart Fan disabled and enabled
disable a boot devices except actual boot drive
tried two different Corsair 850 watt PSU.
Questions:
What are the beep codes for this board?
When will we see a bios update to fix the multiple UEFI interface problems and possibly this issue as well?
I thought I bought an enthusiast motherboard yet RPMs from motherboard fan headers are only monitored 1&2 headers.
I use Aida64 Extreme to monitor temps and voltages but conspicuously missing are things like VTT, SA and PLL voltages and the temps for same.
Is this normal?
are they lacking sensors on this board?
or do I have a defective board?
Final Q
When Aida64 is running CPUz current an previous version will not run on this board. I have spoken to the developer of CPUz Franck and Aida and for the moment it seems to be related to this board only but the failure is consistent even after format and reload. CPUz and Aida64 are known to work/coexist on similar Z68 boards. So my question is, Is this a known issue for this board?
Amendment to the system specs below
I have two opt drives attached to the SataIII (white) headers in AHCI mode the Blue Ray drive is not discoverable in IDE mode. Blue Sata ports 3,4 are configured in a Raid-0 array and 5 & 6 have WD 640 Caviar Blk drives respectively port 7 is empty.

My apologies for posting this in the wrong section. Can a mod move it to the appropriate forum. TY

IMac boot issues, panic report since Yosemite upgrade

I've been having serious issues getting my iMac to boot ever since upgrading to Yosemite - Basically it turns on, makes the chiming sound, goes to the white screen with the apple logo and progress bar and at about 1/3 of the way, goes blank white/black, then either reboots on a loop or freezes until I'm forced to manually shut it down.
When I boot in safe mode, I get this ProblemReport:
Anonymous UUID:       CFB3276F-B26B-291C-F495-653576C46E49
Wed Oct 22 16:58:32 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff800c77a590): "a freed zone element has been modified in zone ipc importance inherit: expected 0x58a9e1599e00910 but found 0xbfbfbf00bfbfbf, bits changed 0x53521aa995fb6af, at offset 0 of 88 in element 0xffffff801f2c7e40, cookies 0x3f001114074f583a 0x53521aa995fb6af"@/SourceCache/xnu/xnu-2782.1.97/osfmk/kern/zalloc.c:496
Backtrace (CPU 0), Frame : Return Address
0xffffff811662b910 : 0xffffff800c73a811
0xffffff811662b990 : 0xffffff800c77a590
0xffffff811662ba00 : 0xffffff800c779c17
0xffffff811662ba40 : 0xffffff800c778de7
0xffffff811662bb70 : 0xffffff800c720a3b
0xffffff811662bc40 : 0xffffff800c7337ff
0xffffff811662bcb0 : 0xffffff800c72b873
0xffffff811662bd00 : 0xffffff800cbb89e0
0xffffff811662bdc0 : 0xffffff800cbb6fc0
0xffffff811662be30 : 0xffffff800cbb8860
0xffffff811662bf20 : 0xffffff800cbb6627
0xffffff811662bf50 : 0xffffff800cc4dcb2
0xffffff811662bfb0 : 0xffffff800c83ac46
BSD process name corresponding to current thread: diagnosticd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x000000000c400000
Kernel text base: 0xffffff800c600000
__HIB text base: 0xffffff800c500000
System model name: iMac11,1 (Mac-F2268DAE)
System uptime in nanoseconds: 24152197674
last loaded kext at 23160986348: com.apple.driver.AppleBluetoothMultitouch 85.3 (addr 0xffffff7f8e5df000, size 61440)
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.driver.AppleHDAHardwareConfigDriver 266.5
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.14.37
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 266.5
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.kext.AMDFramebuffer 1.2.8
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.iokit.IOBluetoothUSBDFU 4.3.0f10
com.apple.ATIRadeonX2000 10.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.kext.AMD4800Controller 1.2.8
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleIRController 327.5
com.apple.driver.AppleUSBCardReader 3.5.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AirPort.Atheros40 700.74.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.driver.IOBluetoothHIDDriver 4.3.0f10
com.apple.driver.AppleMultitouchDriver 260.30
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSerialFamily 11
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 97
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.kext.AMDSupport 1.2.8
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IO80211Family 700.52
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.54f36
Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 2 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Hub
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
Thunderbolt Bus:
I have a late 2009, 27" iMac, 2.8 GHz, 8gb Ram - was running Mavericks, upgraded to Yosemite
Ive run disk utility and verified disk multiple times - on one occasion it said the HD was corrupt but successfully fixed and hasn't reappeared since.
I've also run the hardware test (hold down D as computer restarts) with no problems found
And the ram reset thing (hold down R when computer restarts)
Ive also reinstalled Yosemite and clean Installed it so my computer is now empty.
I've also taken out each piece of ram and tried booting with each individual piece (the same problem occurred with each piece)

I am experiencing this same exact problem; however, I upgraded to Yosemite a couple of weeks ago and didn't experience any problems until this past Friday. The only other thing that's been done since then was installing some updated drivers for my daughter's Wacom Intuos Tablet. Everything was fine for a bit and then (as best we can tell), the video froze up on my son while he was using it and he walked away without shutting it down. We *think* it got overheated and appears to have resulted in the ATI Radeon HD 4850 now causing kernel panics during boot-up.
Symptoms:
On boot, the chime plays and apple logo appears and the progress bar begins to fill in until it gets about 1/4 of the way across.
After the progress bar gets about 1/4 of the way across, the screen goes gray/white, then black while the machine shuts down and re-starts
The machine starts back up and there is an error message (sometimes) that appears and says something went wrong during boot.
After a bit (or if I press a key), the whole cycle starts all over again with Step 1. above.
I've done the following, myself, to no avail:
Reset the SMC (unplug the power and all cables, wait 15-20 seconds and plug the power back in) - didn't help
Reset the NVRAM/PRAM - didn't help
Attempted to boot into Safe Mode - boots and then the display shifts to the left and has garbled/pixelated squares on the bottom right corner
Attempted to boot from the 10.6.2 DVD that came with the iMac when we purchased it back in November, 2011 - boots and then the entire display is pixelated/garbled
Ran the Apple Hardware Test (simple (5+ minutes) and extensive (1+ hours) - no problems found by either, but it didn't appear that the GPU was tested during this diagnostic
Verified that the EFI and SMC firmware is up to date with the latest for the iMac 11,1
Booted into the Recovery Partition (this is the only thing that has succeeded)
Recovery Mode: Ran the Disk Utilities to verify the 1TB HD - no issues with the disk or with permissions.
Recovery Mode: Created a .dmg of my entire 1TB Disk to a backup drive (No time machine backups...I know, bad practice on my part).
Recovery Mode: Attempted to re-install Mac OS X Yosemite - problem persists on reboot
Recovery Mode: Erased and Low-Level (1 pass) write of the entire 1TB partition on the HD and re-installed Mac OS X Yosemite - problem persists on reboot
When I attempt to boot into Safe Mode (Verbose: Command + Shift + V rather than Command + Shift), the messages scroll from the screen before I can catch what it's saying, but it appears to be stating that the machine is re-booting after a kernel panic due to display problems...which correlates with the garbled/pixelated display.
I've found a couple of other posts on here and they seem to point to the ATI Radeon HD 4850 and issues with it overheating and going tango uniform as well.
Basic Troubleshooting of Gray Screen Situations: Mac OS X: Gray screen appears during startup - Apple Support
Specific Troubleshooting and ATI Radeon Info: 09 27" iMac 2.66 grey garbled screen, no boot up   10.8.3. / Senior mods please
I've scheduled an appointment to take it into the Apple Store next Saturday (my first available) to have them verify my findings. I'm hoping and praying that it doesn't cost an arm and a leg to repair/replace the GPU...can't really afford it right now.
At any rate, I hope this information is useful to you!

Macbook Air late 2008 boot and sleep/wake issues

First off I have a booting issue. When I press the power button when it's off, the little front light comes on for a second, I hear the little non solid state hard drive spin up, then the little front light turns on again, but nothing else happens. The computer is definitely on since I can hear the fan, and it gets pretty hot after a while. Sometimes I'll get the startup sound and everything will be fine after a very long wait, like ~15 minutes. Second I have a wake from sleep issue that I can't predict. Every once in a while, I'll try to wake the computer and the screen just stays blank, not doing anything. The light in the front stops pulsing and just stays solid, but the screen doesn't turn on. I've noticed that sometimes I can predict when these things will happen since before I shut it down or put it to sleep, the battery will be X'd out, saying I have no battery connected, even when I'm not connected to a power source. I've already tried resetting the power management and resetting the PRAM. This is a very annoying issue and makes the computer very unreliable. Has anyone had similar issues or has been able to come to a solution?

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the hard drive does not appear in the DU sidebar list then it has died and will have to be replaced. No need to proceed beyond this point.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Touchpad and bluetooth issue

Hi,
The bluetooth and touchpad enable/disable feature is not working on my hp g4 1303AU model. I have installed lots of bluetooth drivers but to no avail.
Please advise.
Thanks,
Parag

Hello @paragpratim,
I have read your post on how the TouchPad and Bluetooth software on your computer is not functioning correctly, and I would be happy to assist you in this matter!
Since the TouchPad and the Bluetooth are collectively not working, I recommend installing the original software and drivers that first came with your notebook computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7) or for (Windows 8).
Once this software is installed, please follow this resource on Using HP Support Assistant (Windows 7) or for (Windows 8) to update the drivers.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Lag Issues since RAM and HD Upgrade

Hi all,
About a month ago I finally ran out of space on my 2007 MBP (2.2ghz). After much research, shopping, etc. I upgraded to 2x2GB Corsair RAM and the Western Digital 500gb Scorpio Blue hard drive.
RAM installation went smooth, no apparent issues.
Then the HD replacement followed a day or two later (just so I was sure the RAM was OK). Opening up the case was daunting, but seemed fine. Clean install of Tiger from the disks, and everything boots up great!
But....now I have lag. No clicking or audible hard drive parking as some have experienced, just a little delay that is inconsistent and across functions (i.e. typing, load new tab in Safari, CMD-TAB to switch applications). Sometimes beach ball, sometimes not.
I have checked all things posted in various forums - repaired permissions, smc and pram resets, and have used Disk Utility, Onyx and TechTool Deluxe (I'm still under Apple Care). The result is less lag, but lag nonetheless.
After booting to my old drive (external and left untouched since the upgrade), guess what? NO LAG!
Can anyone comment / help on the possible issues here? As I see it, here's the possible conclusions I've narrowed it down to:
1. This particular WD is (a bit) faulty. Exchange it assuming WD Scorpio Blues are compatible?
OR, can anyone suggest an HD that is more likely to work without issue?
2. Apple firmware is simply not 100% compatible with 3rd party drives - just need to hope they address this?
3. Tiger is the problem? Move to Snow Leopard and issues will disappear?
4. Insert your theory here.
Thanks!
Kevin
Message was edited by: Kevin Schultz

Just thought I would chime in here,
I am in exactly the same situation as yourself after installing a WD 500GB HD (Model: WD5000BEVT). I have also tried the "hdapm" application but after a lot of effort just couldn't get it to work. I am currently waiting for a response from WD as this seems like a common issue and should hear back from them by the end of today. Just to make sure we have the same thing here are the symptoms from my computer:
- Very brief lag (1 - 2secs) on most things. For example, right click on an item to bring up a menu will result in spinning wheel for a few moments and then the menu.
- At time of lag/freeze a noticeable sound of the HD spinning up before the action will be performed
- Computer boot up and shutdown time seems seem longer than with pervious "official" HD
- I also noticed when I was transferring all my music (43GB) onto the computer the computers responsiveness while using applications was much faster.
Whilst here, does anyone know which HD is the official 500GB 2.5inch SATA drive that apple uses and if apple themselves modify the firmware to make it work better with there notebooks. I would just be interested to know and if it comes to it I will put this current HD into something else and get a more compatible HD.
When I hear back from WD I will post what they said.
Regards.

X220 resume from sleep and boot issues

This is driving me crazy! I have an X220 with Windows 8 and UEFI boot installed.
It all started when I first installed Windows 8 a few months ago which required me to update my BIOS to the latest version. The installation process often got stuck when booting from the Installation CD (the round circle stopped spinning, the display was at full brightness). Eventually I managed to boot into the Installer (when the boot logo doesn't get stuck, the display is then dimmed to minimum).
I was quite happy to have a superfast lightweight OS which booted in an instant.. When suddenly it started to get stuck when booting (same issue with the boot logo not spinning anymore). This happens quite randomly, but I often manage to boot (maybe 2-3 times a week, I don't boot often though..). Now, the booting hangs are less of an issue for me but more often that that it fails to resume from sleep. The LEDs flash and then it instantly drops to sleep mode again (well at least the sleep/moon LED is active). This happens quite often as I sleep/resume up to 5-10 times a day (changing lecture rooms, meeting rooms, save battery when the lectures are boring, ...)
Now after researching and spending hours in debugging this issue, it seems that I'm not the only one having this (or a similar) issue, but often without any definitive solution being specified.
This is what I have already tried:
* Upgrade BIOS and SSD firmware to latest
* Install/update latest drivers
* Mess around with BIOS options
** UEFI/Legacy First options
** Intel Virtualization/vt-d
** Others..
I know based on other threads that I'm not the only one experiencing exactly these issues. Has anyone managed to fix this?
Thank's in advance
Fabio Scala

I had a similar issue, as soon as a described even a little bit of it to warrenty support they sent someone to swap the board
It seems thats the only fix, its been fine since

TS1398 I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc.

I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
Thanks

Noooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!

Windows 8 Laptop Boot Issue (and other related problems)

My Toshiba Satellite S855D-S5148 laptop was bought about a month ago, but it's been giving me issues for the last week.
The most significant one was a boot issue, where out of nowhere, the PC would not start, and after a hard restart, I received an error message saying Windows was not able to start. So I called tech support and they guided me through a PC refresh. That seemed to have solved the issue until twenty minutes later, when my system froze and I could not move the cursor let alone use any applications. So I did a hard restart again, and tried to do another PC refresh until the laptop 'clicked' and shut off. I restarted again, and my system seemed to be working normally until two days later (I did not shut it off or restarted it during this period, only kept it in hibernate when not in use).
Upon trying to use my laptop, it said Windows was reconfiguring. Afterwards, I received an error message saying that Windows had to restart due to 'this problem,' though the problem was not specified. The error message included a list of file addresses that presumably contained a description of the problem, but I can't access the files because they don't show up when I search their addresses. They are .dmp and .xml files, respectively.
Is anyone familiar with this problem? I wish I could return the laptop but it's a couple of weeks shy of the return period (Staples has a measely 14-day return period, but I didn't think I'd have to use it). I don't want to go through the hassle of shipping it off to Toshiba for repairs. Would reformatting the laptop solve the problem? I wish I could attach the .dmp and .xml files to this post but I can't locate them. I'd try using the recovery disks, but they were recently destroyed in a flood.
Any comments, advice, and/or suggestions are very much welcome!

Happy to learn the hardware is fixed.
I was told they could not do so without the product key. ... Any ideas as to how I can get my product key?
Everybody should know by now that there is no product key for preinstalled Windows. The OEM has it locked into the motherboard.
As I've said over and over, recovery media will restore the hard disk to its original out-of-the-box contents. Windows will be activated.
Windows is not installed during this process. Everything on the hard drive is restored. It's an important distinction.
-Jerry

Touchpad and CD-Boot issues since 10.5.6

Similar Messages

Maybe you are looking for