Touchpad and keyboard don't work at same time
Hi. I knew how to fix this problem on Windows 8 but can't seem to figure out how to fix it on Windows 8.1. I put the touchpad on no delay through change PC settings but it still seems to do this. Does anyone know how to fix it?
One of the fonts may be corrupt; to find out which, place half of the fonts on the desktop or inside a folder on the desktop and then try using the Internet again. If it works properly, one of those you removed was causing the issue. Repeat this process until you find the source of the problem; if that font doesn't cause the crash when it is in the Fonts folder, you may have installed too many fonts.
(10884)
Similar Messages
-
My touchpad and keyboard don't work.
When I turn on my computer, my touchpad and keyboard don't work, and only the touchscreeen seems to function properly. It only turns on after a good ten or fifteen minutes. I have had to use a mouse.
hey maybe this link http://www.ubuntuask.com/q/answers-touc … 89324.html will help you, for me reloading the kernel module for the mouse with "modprobe -r psmouse" and "modprobe psmouse" did the trick.
-
Touchpad and keyboard don't work simultaneously
Hey everyone! I just got a new Edge 15 yesterday (this is the Best Buy exclusive one, and it's more expensive of the two options available), but I'm having an issue with it that's really preventing me from enjoying using the machine, and it's incredibly frustrating!
Whenever I press keys on the keyboard and go to use the touchpad together with it, the touchpad freezes/delays for a number of seconds. It makes it incredibly difficult to play any kind of casual game or just browse the web. I've spent a long time looking up solutions, but none of them have helped at all. This Lenovo uses the Alps driver and while it has palm tracking, turning it down to minimum doesn't fix the problem, neither does going through windows 8.1 and choosing the option to have no delay in the mouse/touchpad settings there. I have no idea what to do to fix this problem, if anyone could help that'd be amazing!Try resetting your SMC.
Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
Note: This will not delete any data.
The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
Austin -
Lenovo G500 TouchPad and Keyboard wont function at the same time
Lenovo Laptop G500
Windows 8
Synaptics TouchPad V7.5
Driver Version 16.3.13.3
The Synaptics TouchPad and the keyboard won't function simultaneously. If I uninstall the driver for the TouchPad the keyboard and TouchPad will work simultaneously on the windows driver however the TouchPad is very limited. There is no option to turn off the palm touch listed as a fix in other forum post.
This problem makes it impossible to play games that require the TouchPad and mouse to work simultaneously I would appreciate any help in resolving this issue.
Thanks in advance Dennishi djdishaw,
Welcome to the Forums.
Can you try to:
1. Lower the palm tracking and touch sensitivity to minimum, apply the changes and observe.
- Link to picture
2. If same problem, try to update the Synaptics Touchpad driver to v16.3.15.1 and repeat Step 1.
Windows 8/7/XP/Vista 64/32-bit Edition v16.3.15.1
All Languages
113.9 MB zip
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
USB mouse and keyboard don't work on HP Pavilion g7 2203sd, Windows 8.1.
It is not possible to use a USB mouse or keyboard on the HP Pavilion g7 2203sd notebook running Windows 8.1.
A wireless mouse used to work (already some time ago), but now wired or wireless mouse and keyboard don't work any more.
I have tried removing USB devices in the Windows Device Manager and let Windows detect them again, but it does not work.
I read somewhere that it might have to do with the xHCI USB controller that is installed.
I tried removing that and connecting the USB mouse but no succes.
I also looked for driver updates or something to disbale in the BIOS (like xHCI), but nothing found for that.
Can anybody help me with this problem.
Thanks!Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are having issues with the Keyboard on your Notebook.
We will surely assist you with this.
Let’s start with a questions.
1. Was there any liquid split on the Notebook Keyboard
2. Is there any Dust settled on the Notebook Keyboard
3. Are there any Keys which are fallen off / Any Keys which are loose
Troubleshooting:
Step 01. Could you please check and verify if External Keyboard works fine or not?
Note: Please click on the below shown link to find more troubleshooting steps
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP -
I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is
You cannot download the upgrade to Snow Leopard.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
After Installing the mac os x update for 10.6.8 ive recentley in the last couple of days the bluetooth mouse and keyboard going off at the same time ive looked at some help but i feel like this is a software bug after installing so any other suggetions than taking it into an Apple Store,
I hope apple fixthis problem in there next patch update.Hi,
Welcome to the Discussions
Does the App launch form the Applications Folder rather than the DOCK ?
The icons in the DOCK are links to the App. Sometimes this link can get broken.
8:37 PM Sunday; December 27, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Touchpad and keyboard dosen't work
Hi,
am using a MacBook4,1
it was working properly until i pluged into a non Apple keyboard to my MacBook.
After i pluged in an error has been occurred like press the key rapidly just after the right button.
but there was not such kind of button in my USB keyboard.
whatever,an external USB keyboard works fine.
after some time later,i discovered that my built in touchpad and keyboard stop working.
now i dont know how to fix it up. even am writing it using an external keyboard.
is there anyone who can rescue me up from that **** good condition??
if anybody know how to fix the problem,please help me out from this **** good problem.
My MacBook Config is-
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
L2 Cache: 3 MB
Bus Speed 800 MHz
Boot ROM Version: MB41.00C1.B00.
SMC Version (System):1.31f1
Serial Number (System): W8******0P2
Operating System: Mac OS X 10.5.8 (Leopard)
<Edited by Host>Hello there, omsmac.
The following Knowledge Base article provides a great place to start with some good information that can apply to keyboard issues as well as trackpad:
Trackpad or Magic Trackpad is jumpy or erratic
http://support.apple.com/kb/TS1449
Aside from the usage recommendations, this recommended step is very practical:
If none of the above resolve the issue, try to rule-out software not created by Apple as a cause. To do so, start in Safe Mode.
There are some good steps for testing the keyboard as well found here:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
If the issue persists after attempting Safe Mode, then you may want to try an SMC (System Management Controller) reset. The steps on how to accomplish that are found here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Thinkpad t42 mouse and keyboard don't work after factory reset
I get to the system preperation tool 2.0 but i cant click or select anything . Same thing happens if i turn the machine on and go into safe mode - the keyboard works to select safe mode but when I get to safe mode they both don't work. they both work if i go into the IBM recovery menu.
Any help would be appreciated
Thanks
DK
Solved!
Go to Solution.Hi DK,
If you are using the Rescue and Recovery to reload Windows, you should never see the "SysPrep 2.0" appear. Are you using the orignal recovery CDs to reload windows or booting from the F11 partition? To fix this problem, I would simply start the process of reinstalling Windows again.
Go to this website and follow the guide for Using Rescue and Recovery to Recover your OS
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70803
If you are still seeing the "System Preparation Tool 2.0" after reloading Windows, do the following:
Step 1: Under the "Options" box, make sure the following are checked:
"Don't reset grace period for activation"
"Use Mini-Setup
"Don't regenerate security identifiers"
Step 2: In the drop down menu for "Shutdown mode", change this setting to "Quit"
Step 3: Click the "Reseal" button
This should resolve your issue. Be sure to reload the OS using R&R FIRST before doing the above steps.
Regards,
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks -
The touchpad and trackpoint don't work on X220
All greetings! I from Russia, therefore am sorry for my bad English. On my X220 (4290RV4) the touchpad and trackpoint have ceased to work, but the keyboard and fpr works normally. I tried different versions of BIOS and drivers, reinstalled windows, but it is ineffectual
hey Solo,
try removing the ultranav/mouse drivers from your unit via Device Manager.
go to http://support.lenovo.com ; download the latest ultranav/mouse drivers for your unit and install.
try again.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
[solved] Xorg 1.8.1 + FGLRX Mouse and keyboard don't work...
Beginning this week i installed Arch linux for the first time (several times infact) and i followed the installtion guide to get gnome working on my machine...
pacman -Sy
pacman -S xorg
pacman -S gnome gnome-system-tools gnome-extra gdm gksu
I also added the "fuse usblp" and " fam hal" entries to /etc/rc.conf in their respective sections as decribed there.
When i would reboot and type gdm the system would start up and i could configure everything else, but after reinstalling this morning this no longer works because the xorg got upgraded to a new version.
When i type gdm or startx in complains that "vesa" has no modes, so i installed and configure the fglrx drivers from the pacman source.
Now comes the actual problem, when i now type gdm or startx i get the graphical enviroment but my keyboard and mouse do not work and the computer is frozen.
I tried going to a diffirent tty but it won't take those commands either.
Does anyone have any idea what the problem could be ? i do not understand what is wrong....
The Solution - Because the vesa driver didn't work i installed fglrx and i deleted this folder called /etc/X11/xorg.conf.d as i had never seen it before and figured that i didn't need it if xorg.conf was present.
Leaving the folder intact solved the problem
it was a noobish mistake from a beginner, sorry folks
Last edited by Dennis Beekman (2010-06-21 10:17:04)Beginning this week i installed Arch linux for the first time (several times infact) and i followed the installtion guide to get gnome working on my machine...
pacman -Sy
pacman -S xorg
pacman -S gnome gnome-system-tools gnome-extra gdm gksu
I also added the "fuse usblp" and " fam hal" entries to /etc/rc.conf in their respective sections as decribed there.
When i would reboot and type gdm the system would start up and i could configure everything else, but after reinstalling this morning this no longer works because the xorg got upgraded to a new version.
When i type gdm or startx in complains that "vesa" has no modes, so i installed and configure the fglrx drivers from the pacman source.
Now comes the actual problem, when i now type gdm or startx i get the graphical enviroment but my keyboard and mouse do not work and the computer is frozen.
I tried going to a diffirent tty but it won't take those commands either.
Does anyone have any idea what the problem could be ? i do not understand what is wrong....
The Solution - Because the vesa driver didn't work i installed fglrx and i deleted this folder called /etc/X11/xorg.conf.d as i had never seen it before and figured that i didn't need it if xorg.conf was present.
Leaving the folder intact solved the problem
it was a noobish mistake from a beginner, sorry folks
Last edited by Dennis Beekman (2010-06-21 10:17:04) -
Wireless Mouse and Keyboard don't work under bootcamp. Any suggestions?
I installed Windows 7 through Boot Camp. Everything works, but my wireless mouse and keyboard. If I add a wired mouse and keyboard, they work. Have reinstalled Bootcamp a few times, but when I try and add the devices. they are seen, but then can't pair.
Any help would be appreciated.Well, the 'unplugged' reference was noted earlier and I wasn't sure if you'd get a
better response than a standard suggestion to try the other ideas in this link first
•Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
before actually performing the SMC, that is a dragnet kind of catch-all, sometimes.
All of my keyboard & mouse units are USB and I've gone as far as supplying the
mouse and other peripherals with a powered USB hub; so power from the Mac
isn't spread too thin. The keyboard is one of the only items that should be attached
to the USB port; as it has to work on startup pre-boot keyboard shortcuts... Such
as SafeBoot, PRAM reset, and others where you need a live keyboard and BT
may not be up to the task of being ready. Three going on four of my Macs have
bluetooth capabilities for those items; but I can't justify the continual upkeep cost.
Spare USB keyboards and a few extra mouse are handy as troubleshooting tools, too.
There are some USB keyboard references among search results in this linked page:
https://www.google.com/?gws_rd=ssl#q=Apple+USB+keyboard+troubleshooting
Perhaps the SMC pre-reset suggestions may help resolve the issue, if not, try reset.
Good luck & happy computing!
edited -
After catalyst 10.10 / xorg 1.9 update, mouse and keyboard don't work
Hi guys,
Yesterday I got the new catalyst update together with the new xorg server, but after rebooting and starting x, I neither could move the mouse nor press short cuts.
I have reinstalled xf86-input-evdev and xorg-input-drivers, but still same issue.
How to fix this?
Edit: Solution: remove [xorg18] repo from /etc/pacman.conf
Thanks
Last edited by scenox (2010-10-26 11:42:09)Double checking,
are you loading hal at startup (evdev needs it)
yes, see my rc.conf
DAEMONS=(syslog-ng hal cups @network @net-profiles netfs @alsa !slim)
and did you try recreating your config with aticonfig --initial?
yep.... i try
my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen "aticonfig-Screen[0]-0" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "record"
Load "dri"
Load "glx"
Load "GLcore"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection -
Sound and Vibrate does not work at same time
Hi Support,
I have recently purchased BlackBerry Z3.
It does not support Sound & Vibrate at same time.
In Normal mode, I have enabled Sound and Vibrate but it does only give sound for incoming calls/messages.
(does not vibrate)
In Vibrate Mode, it does only vibrate.
This is the first time I am using Blackberry and I am annoyed with the basic feature not working.
Please respond.
Regards,
Sunil.
Solved!
Go to Solution.I'm glad things are back to normal for you.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
How to get dual 5ghz and 2.4ghz to work at same time
i am unable to get both 5ghz and 2.4 ghz to work at the same time - i only get options to use either one or the other - i have the AE xtreme -[bought when 1st came out] and the radio mode does not give me the option to choose both.
never mind i found the answer ... i didnt know they just came out with a new
aEBS ....
Maybe you are looking for
-
How to write an inverse routine for an info object at field level.
Hi All, Our requirement is as follows: Need to populate 0MAT_PLANT in a virtual provider. But during query performance it is like - If someone were to add a filter to the BW query on 0MAT_PLANT, it would take the system awhile to search the APO datab
-
Inline attachments such as PDF
I receive numerous pdf attachments from a friend. They show up inline as graphics. I would prefer that they show up just as attachments. I cannot find a setting for this. Is there any way to change this? Daniel
-
Java update not working with OS X
Downloaded Java and it doesn't seem to be working after updating to OS X and can't play mine craft -
-
Can Reminders in ML sort/order items per dates?
Can Reminders in ML sort/order items per dates? It was possible when it was part of Calendar in its previous incarnation. Doing it manually is a drag (no pun intended). Seeing uncompleted reminders as well as what is imminent, without sifting th
-
Confusion in group by function- Any thoughts?
Hi, I always have a doubt regarding the group by function i.e. if we are using a group by function and we want to display some columns which are not to be grouped by then how do we display those. Like for eg. to display last name, department no and a