Touchpad and keyboard dosen't work

Hi,
am using a MacBook4,1
it was working properly until i pluged into a non Apple keyboard to my MacBook.
After i pluged in an error has been occurred like press the key rapidly just after the right button.
but there was not such kind of button in my USB keyboard.
whatever,an external USB keyboard works fine.
after some time later,i discovered that my built in touchpad and keyboard stop working.
now i dont know how to fix it up. even am writing it using an external keyboard.
is there anyone who can rescue me up from that **** good condition??
if anybody know how to fix the problem,please help me out from this **** good problem.
My MacBook Config is-
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
L2 Cache: 3 MB
Bus Speed 800 MHz
Boot ROM Version: MB41.00C1.B00.
SMC Version (System):1.31f1
Serial Number (System): W8******0P2
Operating System: Mac OS X 10.5.8 (Leopard)
<Edited by Host>

Hello there, omsmac.
The following Knowledge Base article provides a great place to start with some good information that can apply to keyboard issues as well as trackpad:
Trackpad or Magic Trackpad is jumpy or erratic
http://support.apple.com/kb/TS1449
Aside from the usage recommendations, this recommended step is very practical:
If none of the above resolve the issue, try to rule-out software not created by Apple as a cause. To do so, start in Safe Mode.
There are some good steps for testing the keyboard as well found here:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
If the issue persists after attempting Safe Mode, then you may want to try an SMC (System Management Controller) reset. The steps on how to accomplish that are found here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is

    I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is

    You cannot download the upgrade to Snow Leopard.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer)
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
             3. MacBook Pro (Mid/Late 2007 or newer)
             4. MacBook Air (Late 2008 or newer)
             5. Mac mini (Early 2009 or newer)
             6. Mac Pro (Early 2008 or newer)
             7. Xserve (Early 2009)
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         Am I eligible for the free upgrade?
             See Apple - Free OS X Mountain Lion upgrade Program.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • My touchpad and keyboard don't work.

    When I turn on my computer, my touchpad and keyboard don't work, and only the touchscreeen seems to function properly. It only turns on after a good ten or fifteen minutes. I have had to use a mouse.

    hey maybe this link http://www.ubuntuask.com/q/answers-touc … 89324.html will help you, for me reloading the kernel module for the mouse with "modprobe -r psmouse" and "modprobe psmouse" did the trick.

  • Touchpad and keyboard aren't working properly][Only one battery charges

    When charging cable is plugged in, I have no problems, but when I detach it, keyboard and touchpad stops working.If I put my flashdrive into keyboard dock it will do sounds like it's connecting and disconnecting looped. And the second weirdness: it shows that I don't have the second battery.. I checked it in bios and there were displayed two batteries(32wh and 33wh)..I wonder if it's really only one battery charging all the time..  I just bought it yesterday and it is killing me..

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Split 13-m010dx x2  and issues with the charging while detached. When the Tablet part is detached you will not see the other battery and it will not charge as it is detached. The setting you have it on will drain the battery very quickly, Change the setting from High performance to Hp recommended will help. Here is a link to update the battery. Here is a link to troubleshoot the battery. Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue. The keyboard and TouchPad will not work when the Tablet is detached. This is by default. If this does not help, please use the following link to create yourself a case number, then call and it may help speed up the call process:
    Open link: www.hp.com/contacthp/
    Case number and phone number appear.
    They will be happy to assist you immediately. Thanks.

  • Touchpad and keyboard don't work at same time

    Hi. I knew how to fix this problem on Windows 8 but can't seem to figure out how to fix it on Windows 8.1. I put the touchpad on no delay through change PC settings but it still seems to do this. Does anyone know how to fix it?

    One of the fonts may be corrupt; to find out which, place half of the fonts on the desktop or inside a folder on the desktop and then try using the Internet again. If it works properly, one of those you removed was causing the issue. Repeat this process until you find the source of the problem; if that font doesn't cause the crash when it is in the Fonts folder, you may have installed too many fonts.
    (10884)

  • Touchpad and keyboard don't work simultaneously

    Hey everyone! I just got a new Edge 15 yesterday (this is the Best Buy exclusive one, and it's more expensive of the two options available), but I'm having an issue with it that's really preventing me from enjoying using the machine, and it's incredibly frustrating!
    Whenever I press keys on the keyboard and go to use the touchpad together with it, the touchpad freezes/delays for a number of seconds. It makes it incredibly difficult to play any kind of casual game or just browse the web. I've spent a long time looking up solutions, but none of them have helped at all. This Lenovo uses the Alps driver and while it has palm tracking, turning it down to minimum doesn't fix the problem, neither does going through windows 8.1 and choosing the option to have no delay in the mouse/touchpad settings there. I have no idea what to do to fix this problem, if anyone could help that'd be amazing!

    Try resetting your SMC.
    Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
    Note: This will not delete any data.
    The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Austin

  • Touchpad and Keyboard not working (including external devices)

    Hi,
    I am using an rmbp with win7 and macosx.
    Win7 on my bootcamp partition was working perfectly(4 months+) until now .I restarted my system  and realized that the touchpad and keyboard are not working(inluding external mice/keyboard).I can boot into Macosx and the mouse and keyboard are working perfectly so its not a hardware problem.I havent set any restore points and have tried all the other recovery options (using f8 before booting) but to no avail
    I have read some other solutions which involved opening the device manager but I cannot press anything when I login to windows.Does anybody have any idea except reinstalling windows? I would really appreciate any help !
    Cheers

    I have even loaded my Bootcamp partition in parallels ,in hopes of repairing the installation from there but Parallels give an error about mouse coherence and I cannot use my keyboard and mouse there .
    Does anyone have any other idea except reinstalling windows ? .Thanks !

  • Touchpad and keyboard not working at startup

    i am having lenovo g series 460 machine
    the machines touchpad and keyboard doesnt get detected at startup .. it continues for approx. 10 minutes and after it works fine..
    what wil be the posssible pblm with my notebook.
    i feels like the touchpad and keyboard are only working when the system was heated up..
    pls help

    one interesting thing i observed is that a usb mouse or usb keyboard is working nicely at the startup itself

  • Hi i need help one of my key on the keyboard dosen't work for some reason please help

    hi i need help one of my key on the keyboard dosen't work for some reason please help

    try smc reset
    http://support.apple.com/kb/ht3964
    and Pram reset
    http://support.apple.com/kb/ht1379
    (Try pram a few times to get correct sequence)
    Check what you have selected in
    system preferences/system/accessibility/keyboard
    and system preferences/hardware/keyboard  (keyboard and keyboard short cuts tabs)

  • USB mouse and keyboard don't work on HP Pavilion g7 2203sd, Windows 8.1.

    It is not possible to use a USB mouse or keyboard on the HP Pavilion g7 2203sd notebook running Windows 8.1.
    A wireless mouse used to work (already some time ago), but now wired or wireless mouse and keyboard don't work any more.
    I have tried removing USB devices in the Windows Device Manager and let Windows detect them again, but it does not work.
    I read somewhere that it might have to do with the xHCI USB controller that is installed.
    I tried removing that and connecting the USB mouse but no succes.
    I also looked for driver updates or something to disbale in the BIOS (like xHCI), but nothing found for that.
    Can anybody help me with this problem.
    Thanks!

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are having issues with the Keyboard on your Notebook.
    We will surely assist you with this.
    Let’s start with a questions.
    1. Was there any liquid split on the Notebook Keyboard
    2. Is there any Dust settled on the Notebook Keyboard
    3. Are there any Keys which are fallen off / Any Keys which are loose
    Troubleshooting: 
    Step 01. Could you please check and verify if External Keyboard works fine or not?
    Note: Please click on the below shown link to find more troubleshooting steps
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    I work on behalf of HP

  • Auto brightness of screen and keyboard backlight not working

    Basically, since I updated to OS X Lion, the auto brightness feature for the screen and keyboard hasnt been working, despite the fact I have it turned on
    Thanks in advance for your help

    Same problem here.  I initially thought the auto-brightness problem had been fixed in 10.7.3, but sadly it hasn't. The auto-brightness works when the Mac starts, but I find it loses control and fails after wake from sleep. 
    I have telephoned AppleCare several times but they are not aware of this bug.  They think a PRAM reset cures it, but it doesn't.  As soon as the machine goes to sleep then auto-brightness fails on wake.
    I have used the Apple Form to report the bug.  It might eventually get fixed if others would kindly report it as well please.  Here is the link:
    http://www.apple.com/feedback/macosx.html

  • How can I stop the Thinkpad Yoga 14 from disabling the touchpad and keyboard?

    My dad got a Thinkpad Yoga 14 about a month ago and he usually uses his laptop at a 90 degree angle in bed. So when he is on his side, the laptop is on it's side as well. When he does that with the Thinkpad Yoga, the touchpad and the keyboard are disabled and he cannot use the laptop like he wants to. I think because it's a setting to not accidentally touch the keyboard or mouse when using it in tablet mode.
    I cannot find any setting on how to stop Windows from disabling the touchpad and keyboard on rotate. I've turned off auto-rotate but can't see anything else. Any help would be greatly appreciated! Thank you!

    iPhoto seems to be viewing the iPod as a camera.  Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
    OT

  • HT5639 I have downloaded Windows 8 on my Mac Pro 13'' retina display. The first few hours everything worked fine until I open windows today and the trackpad/mouse and keyboard aren't working. Ive tried resetting windows but it didnt work. help appreciated

    I have downloaded Windows 8 on my Mac Pro 13'' retina display. The first few hours everything worked fine until I open windows today and the trackpad/mouse and keyboard aren't working. Ive tried resetting windows but it didnt work. help appreciated thanks

    It sounds like it is time to restore from the backups you made just before making the disk changes.
    You can re-partition and restore your backups.  If you didn't make backups first (you were warned that it might damage things and to make sure you had a good backup) then you will need to repartition everything and reinstall from scratch...

  • I've downloaded apps. on my iphone 4 and it dosen't work ??

    i've downloaded apps. on my iphone 4 and it dosen't work ??

    Reset your iPod (hold down home and power buttons until the iPhone restarts).
    If that doesn't work, hold down power button only until the iPhone turns off, then hold it down to turn it on again.
    if that doesn't work, then restore your iPhone through iTunes, but back your device up FIRST so you don't lose data. http://support.apple.com/kb/HT1766

  • My Muse compositions, panels and slideshows dosen't work (preview).

    Hi!
    What's wrong? I didn't have any problems with muse earlier... older version and older Win XP.
    Now I have the latest version of Muse and Win8.
    My compositions, panels and slideshows dosen't work when I try to preview designt site in browser.
    Is something missing on my computer? Or what's wrong?
    Regards from Finland!
    -Nanna

    Hello,
    Please provide us with the site URL and if possible, screenshots showing the exact issues.
    Cheers
    Parikshit

Maybe you are looking for

  • Computer says you've been signed out when I try to enter creative cloud

    This is apparently a problem for many people.  What's the solution? Joe and Mandy

  • HT2280 Apple TV stopped working.

    My apple TV used to work but now just flashes quickly and The TV displays an iTunes logo and a USB cable. I can't access any menus to try anything and restarting just brings me back to the same screen. Is it dead?

  • 'Other' taking unusual space in my iPhone 4s

    Recently i erased all content and settings on my iPhone 4s and set up it as a new phone because it had taken more than 1.4 GB of space for 'other' category according to iTunes. But after the set up process (As a new phone) i noticed that it's taking

  • Iphone apps not detected

    iTunes has obviously just updated itself.  Today when I plugged in my iphone I got an error message that apps could not be detected on my iphone.  They are still there on the phone, and iTunes seems to have remembered which ones are on the phone and

  • Is a way to get some classes loaded?

    I run into a problem today. After the main class is up, a "java.lang.NoClassDefFoundError" exception is thrown while running. The class is located in the same directory as the main class. After I turn on the verbose option, I find the class is not lo