Touchpad/Cursor not Working

I have a HP 2000 Notebook PC; can't seem to find the model numbers or anything. My touchpad just randomly stopped working when I opened my laptop this morning. I'm using an external mouse right now but need to have access to the touchpad. I have already attempted the following: Rebooting 5 timesTrying function keysToggling on/off: there is not light above the touch pad, and double tapping does not facilitate any change in the light or function of the touchpadReinstalling touchpad driver twiceSearching mouse properties: does not list touchpad as mouse device. Thanks in advance.

brainking wrote:
yes Sir , It workred Thanks but that created anopther problem !!!after getting curser back I started my laptop and I lost all Icons on screen ,just a blue screen !! Ifew mis a go I post the same request in forum I am in middle of filling oput application for my college admision , Please I need help desperatly . Please reply fast Thanks Sanchertx wrote:
Try a hard reset: Remove AC and Battery:Hold Power down for 30 secsreconnect Battery and AC and see if this brings it back. Sanchertx wrote:
Try a hard reset: Remove AC and Battery:Hold Power down for 30 secsreconnect Battery and AC and see if this brings it back.
Hello Sir, I tried that but not working If I install bettery and No power supply only Icons on screen and Remove bettery , supply power from AC supply only curser and NO icons !! Not getting icons and curser together !!I need urgent help

Similar Messages

Touchpad Buttons Not Working

I purchased this Toshiba Satellite C55D-B5102 last week, I installed Windows 10 last night. After installing Windows 10 the touchpad did not work. I have since fixed that issue. However, now the buttons for the touchpad are not working and I'm unable to find a solution to this issue. I am able to use a wireless mouse for functionality, so that helps, however, this is a very hindersome problem... Any guidance would be much appreciated.

Hi I´m not sure if this gives any guide but this what I have done to "Win 10 + touchpad problems". I have a Satellite P30 W-B which is brand new. I installed Win 10 yeasterday and my Touchpad didnt work any good after that, I only had the cursor function and a click function working, no right click or so. I checkad all possible solutions here and there and what I finally did was to uninstall the ELAN tocuhpad driver and a ree-start. I thought the touchpad would be dead after that but it works fine! Now its a MS softwere instead automaticly, quite old. Now it works like before. THe ELAN driver came with he Win 10 package. I might have lost some functions incoperated in the ELAN driver like scroll or so but I wont install any new driver unless its working properly with Win 10 so I can wait for that. I hope this can be something for the moment.

Touchpad does not work even after format - x220t

Hi there,
I've had my X220 tablet for about 10 months and it has been great. For the last month however, the touchpad and touchpoint have become flaky. When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing. I have also updated/reset the BIOS.
I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating.
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that. When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled. I am not sure of this, but it is my belief now.
Are there solutions out there for me? I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
thank you,
steve

xyster wrote:
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
If you are ready to reinstall Windows, try this method:
http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

Touchpad is not working properly on Satellite L30-X10

Hi to all of you.
I've got the following issue: On my notebook the scroll on the touchpad is not working. If somebody can tell me how to fix this problem it would be kindly appreciated.

Hi,
I am not sure if this can be a good solution but maybe its worth to try it:
1. Download the latest touchpad software from here:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
2. Remove the old software
3. Reinstall the downloaded software
4. Go into your mouse properties and check if everything is configured (especially the scroll function)
Give some feedback in case of further questions..
Cheers

Tecra M3 - touchpad is not working with Windows 7

I have a Tecra M3 that I have updgraded to Windows 7. The touchpad is not working.
The Toshiba website does not have Windows 7 drivers for this model. I have tried installing the touchpad driver and TVAP from the A11 model but still cannot get it to work.
Can anybody help? The audio doesn't seem to be functioning either.

Hi buddy,
As Silas wrote, it could be a little bit problematic to find the correct drivers because it doesnt support Vista...
You should try a touchpad driver from another model like Tecra M4. This should work.
But Im wondering about this. Basic functions of touchpad should also work without special driver.
Can you use the touchpad at the moment?

The click at touchpad is not working, please help!!!

I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!

For this issue AppleCare support told me to so a SMC reset as follows:
Power the machine OFF.
At the SAME TIME hold down the following buttons:
Shift
Control
Option
Power
Then release all buttons. Power up the Macbook and see if the trackpad button work.
Hope this helps.
Bill

Re: Satellite L500D - Touchpad "touch" not working

Hi everyone,
my touchpad's touch function (to emulate left-clik by tapping the touchpad) is not working any more. I can move the mouse with the pad.
Also the left button below the pad is not working - the right one is.
I've already tried :
-Updating the driver
-Fn+F9
-The touchpad settings - the "touch" function is enabled
-The Toshiba hardware test - passed
but with no success.
Not sure whether it's a software issue or a hardware one.
Any suggestions?
Thank,
Andres

Hi
As far as I know the option is called Tap to Click
You should check if this enabled in the touchpad settings.
>Also the left button below the pad is not working - the right one is.
Maybe this has something to do with the fact that the left click by taping is not working
Its hard to say what could cause this
As I said; the options should be checked once again in control panel -> mouse -> device settings -> settings (or properties)
If all the settings would be ok, then a touchpad hardware issue might be possible

Touchpad is not working anymore after Windows Update

Issue:
After a Microsoft Windows update it may occur that the touchpad is not working anymore.
Resolution:
Press the shortcut function keys (typically F5 or Fn+F5) to enable the touchpad again. Please refer to the user manual of your notebook to find the correct key combination for enabling the touchpad.
More Info: aps2.toshiba-tro.de/kb0/TSB5303QQ0002R01.htm

Check the settings:
Press FN+F9 or hotkey to turn on touchpad.
If the problem persists then enter the BIOS and make sure BIOS is set to default.
S.Sengupta, Windows Entertainment and Connected Home MVP

Z50-70 touchpad is not working - Windows 10

Hello. I installed Windows 10 to my Z50-70, and now my touchpad is not working. It worked like few hours.My USB mouse works fine. This laptop is new, I bought it 3 weeks ago. What should I do? Thank you!

Just found the same problem with my lenovo Z50. Touch pad completely non responsive. Under start menu, settings, devices, mouse & touchpad, additional mouse options, elan tab. The elan touchpad settings were completely grayed out and unavailable. So from there I went to the window search in the task bar and typed in "computer management " and opened the computer management desktop app. Under device manager selected mice and other pointing devices and then elan input device. In the elan properties window that opened I selected uninstall to uninstall the driver and in the next box that opened warning that the driver was about to be uninstalled l checked the delete driver and then OK. Then restarted windows. In the process of restarting windows detected the elan touchpad as a new device and installed the driver in time for the login screen. So my elan touch pad is now working again. I am assuming that the driver had been corrupted in the upgrade from Windows 8.1 to 10. I hope that this information is of help to you. Should be a bit easier for you as you have an eternal usb mouse that works, I had to remember the old shortcuts keys from back in the day when the mouse was not that common.

Hp 430 laptop touchpad is not working afternet connecting rj-45 cable

hp 430 laptop touchpad is not working after connecting rj-45 cable, Please help me.

Hello 9560030067, and welcome to the HP Forums.
I see you are having issues getting your printer to be recognized. I would be happy to help you with that!
First, I would suggest disconnecting the USB cable, and Uninstalling the Printer Software.
Once it is uninstalled, reinstall the software. Be sure not to plug the USB cable back in until the software prompts you to connect it. Also, when plugging the USB back in, I would suggest plugging it into a USB 2.0 port, not a 3.0 port.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP G62 touchpad scroll not working after Windows 10 update

Hello, As many, I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10. I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port. Can you please provide information on how to fix? Best,

Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad.
1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

[fixed] Touchpad suddenly not working on Acer Aspire 5670

I am using gnome 2.28 and i never had any problem with my touchpad: I actually cannot recall having updated before this issue came out..... just, suddenly, the touchpad is not working... no movement, no clicking... nothing at all.....
I am using an external useb mouse........ i am also using hotplugging (no xorg.conf).... any idea? Not having mouse is quite frustrating
Last edited by Xi0N (2009-10-29 12:40:11)

that's odd..
does the touchpad works on login screen?
(mine did it there, but no in the desktop)
is it enabled in Bios option?
did you try erasing and re-installing xf86-input-synaptics?
pacman -Rsn xf86-input-synaptics, and then pacman -S xf86-input-synaptics
just giving you ideas.. 'cause i don't know what can be the cause
ps: did you read this wiki? http://wiki.archlinux.org/index.php/Touchpad_Synaptics
Last edited by palinux (2009-10-24 03:21:40)

My touchpad is not working anymore after using usb mouse for a while

I have been using usb mouse for a couple days now I only can use usb mouse because my touchpad is not working. its like it is disabled or something.
I have asus k55v (windows 8.1)
pleasseeee help !!!!

Check the settings:
Press FN+F9 or hotkey to turn on touchpad.
If the problem persists then enter the BIOS and make sure BIOS is set to default.
S.Sengupta, Windows Entertainment and Connected Home MVP

Touchpad scroll not working after Windows 10 update

Can you help? I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10. I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port. Can you please provide information on how to fix?

Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad.
1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

Macbook touchpad is not working

The touch pad on my 2008 Macbook is not working. I can scroll up and down, but cannot select. Any suggestions on if it can be fixed?

Very interesting!!! Because today my touchpad on my MacBook Air stopped working. I can move the cursor but every other motion like drag and drop or selecting, etc, doesn't work.
And I just logged on for help.
I will try the PRAM reset, etc., that was suggested.

Touchpad/Cursor not Working

Similar Messages

Maybe you are looking for