Touchpad Disable/En​able & Sensitivit​y Problem

I am unable to Disable/ Enable the Touchpad.  Double tapping the upper left corner does not work.  Also would like to adjust it's sesitivity to touch if possible.  Any recommendations?
Thanks,
Cobbler

It sounds as if you’ll have best use out of your touchpad by turning off your touchpad’s "tapping" function:
press the blue thinkvantage button
select device configuration
select mouse settings
select manage settings
select the ‘ultranav’ tab along the top
go to settings
select ‘Tap and Drag’ tab
disable tapping
a faster way to get to the tapping function if you later find you want to turn it on and off, is to locate the ultranav icon on lower right of your screen, left of the system time, click there, and go to touch pad settings.

Similar Messages

  • T60; Touchpad disabled; No "Touchpad" option on BIOS

    dear community members,
    since I restaged XP, my touchpad isn't working and is permanently disabled. Symptoms are:
    a) On ThinkPad Configuration utility, the TouchPad item is grayed and can't be checked
    b) when Fn+F8, three options appears: (1) Enable trackpoing and touchpad (2) Enable trackpoint only (3) Enable touchpad only. Even when I choose option (1), the touchpad isn't enabled
    c) when launching UltraNav wizard, message is: "Touchpad is disabled from BIOS. Please enable it from BIOS or the ThinkPad configuration utility"
    d) on the BIOS utility, there is no option for Touchpad under Config/Keyboard Mouse
    BIOS was updated today
    Trackpoint works OK
    UltraNav shows Touchpad disabled (grayed)
    Device manager doesn't shows any error.
    Can someone understand what is happening ?
    Regards

    hi
    İ am same ploblem in my t61 do you have any idea or have you resolved this problem
    Thanks &Regards
    Murat CIRBAN

  • Hi my iphone 4 is disabled how can solve this problem? help me please

    hi my iphone 4 is disabled how can solve this problem? help me please

    What do you mean by "disabled"? Disabled by entering the wrong passcode? If so, you'll have to force the phone into recovery mode & restore it to get it working again & remove the passcode:
    Turn your phone off, then force it into recovery mode & restore it:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • Idle power management features on processor disabled due to a firmware problem - after BIOS update

    Hi,
       I did a BIOS upgrade on my E20 - 4220-CTO to 5JKT55A and I started seeing these messages in my System Event log ->
    "Idle power management features on processor 0 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
    "Idle power management features on processor 1 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
    "Idle power management features on processor 2 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
    "Idle power management features on processor 3 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
    The messages occur on each reboot.
    I upgraded to the latest bios 5JKT56A and I get the same messages.
    I was not getting these error messages on BIOS level 5JKT47A(ship from lenovo with this level).
    I updated my BIOS as it was suggested on the lenovo site before doing the win7 SP1 update. Note - I got the error before and after the SP1 update so it's not related to SP1.
    I have not see any additional issues, just the messages in the event log on each boot.
    Any ideas?
    Thanks in Advance!

    5JKT58A is the current E20 BIOS.   have you tried it yet?
    http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-74761
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Touchpad disabled - but still strange problems

    I have a strange issue with the touchpad in my lenovo thinkpad r500. I have disabled it using
    synclient TouchpadOff=1
    in the console but when I use the trackpoint (for instance the middle mouse button for scrolling) and touch the touchpad at the same time with the palm of my hand the mouse pointer starts going crazy plus it wildly opens new tabs and pastes text that i copied before... It basically acts like im pressing a lot of key combinations at the same time.
    Does anybody have the same problem or know why the touchpad reacts to being touched at all (since it should be disabled and doesn't do anything when I touch it without using the trackpoint)?
    Thanks for your help.

    Download clockgen (just google it) and make sure your agp speed isn't too high.  Lots of people have reported that MSI oc's on certain settings. Even though your friends card runs fine, it might just have more oc headroom than yours.

  • G570 TouchPad disabling problem

    Hi!
    I recently bought a new Lenovo G570 Laptop and immediately updated the BIOS (so I can't tell if it worked before). Everything seems to be working perfect, but I found that Fn-F6 (enable/disable touchpad) is not working and the TouchPad is stuck enabled. It's really bothering me, is this a BIOS problem or just wrong Windows configuration?
    Solved!
    Go to Solution.

    hey isagar2004,
    I would recommend going to http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=130485 and update all your drivers.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • U530 Touchpad - disable zones

    Hello all,
    I've just received my brand new IdeaPad U530 Touch and I'm having a serious problems with touchpad. 
    I've disabled tapping and I would like to use it as a normal touchpad - left-bottom for left click, right-bottom for right click and everything else for moving the cursor. 
    My problem is with the last part. The zone where left\right click buttons are located is also used for moving the cursor, which is extremely annoying and confusing at the same time. 
    To reproduce (one of the many issues):
    1.) Go to desktop
    2.) Press and hold the bottom left corner
    3.) Try to select any area on the screen (hold left button and move the mouse) - this doesn't work
    I would like to specify that bottom of the touchpad is used ONLY for pressing buttons and not for moving the cursor, this makes my life really miserable at the moment. 
    Thanks,
    Martin

    I have a different machine (a thinkpad) and had a similar issue.  It is possible that the touchpad may be trying to interpret having 2 fingers on at once as a 2-finger gesture -- on my machine, I was able to go to the touchpad settings and adjust a property called "Gesture Filtering" to create a larger zone in the bottom of the touchpad.  With this change, I am able to rest one finger on the bottom of the touchpad while using another to move the pointer around.  Hope this helps

  • T430 Touchpad Click Issue [FIXED, 3RD PARTY PROBLEM]

    Hi,
    When using the touchpad on my T430, my click buttons rarely work as intended. Sometimes, they begin to work after the laptop goes to sleep, or occasionally an entire boot is okay. However, this is rare. When it isn't working, what happens is that the right click doesn't function at all, and the left click seems to be more of a left click + context menu key rather than a pure left click.
    I've tried reinstalling the Ultranav drivers, restoring their settings to the default (I can confirm that the left click is set up to function as a left click, and right as a right click - if I set up the right click to function as a left click, both do the odd context menu behavior), and even doing a complete BIOS update, to no avail. I've yet to try this in another OS, so I haven't yet isolated this to a hardware or software issue.
    What could be my issue? I am not under warranty and would prefer to not send in my laptop for repair.
    EDIT: I was able to fix the weird context menu behavior by disabling the Menu Key in SharpKeys (mapping key 117 (0x0075) to do nothing (0x0000)). However, my right click still does nothing. I can bind it using the Ultranav settings to be a left click, and in this mode, it left clicks. Anything bound to be a right click literaly does nothing.
    Any ideas?
    EDIT2: I ran sfc /scannow on an elevated command prompt and it fixed a lot of errors. It drastically sped up my computer; what's odd is that I've hardly installed anything on here, all I did was remove a lot of the Lenovo bloat (but not all of it). Anyway, after doing that, I restarted and lo and behold, my custom theme was wiped out because it restored the three .dlls that I patched for that. It also wiped out SharpKey's registry entry. So, I re-created the registry entry, logged out, logged back in, and again, left mouse worked fine but right didn't. I then re-patched the theme .dlls and restarted.
    That was the fastest boot I have ever experienced on Windows 7, it was on the login screen before the orbs of the logo even joined together. My right click is working as intended now, and it's nice to have it work again - however, this has happened in the past, where it worked for one boot and then stopped the next, so I'll keep this post updated to see how it pans out.
    EDIT3: Literally as I hit submit on my past update, I couldn't click my taskbar. This happens from time to time on this machine and I think it's a driver mishap regarding Optimus. Either way, the only way to fix it is to hit ctrl+alt+delete, get to the prompt asking about switch user/task manager/etc, and hit cancel. Then when it returns to the desktop, everything is fine. I did that, and now my left click is pseudo right clicking again and my right click does nothing. pls help
    EDIT4: I just updated my BIOS with the latest release on the drivers page (1/24/14 or something) and after a quick reboot/flash cycle, I was able to log into Windows with the mouse working as intended, both left and right clicking. We'll see how long this holds up; if I never update this post again, it worked!
    EDIT5: I literally had a full repeat of EDIT3. I'm going to keep looking into ways to get this working.
    EDIT6: I logged out and back in again, thinking SharpKeys would reapply itself, and lo and behold, it fixed the odd left click. My right click button is still doing nothing though, but at least I can navigate Windows.
    EDIT7: It appears I had an AutoHotkey script tampering with the Menu Key. I deleted it and now everything is working as intended, plus my machine is faster than ever.

    Try turning off first the touchpad and seeing if the trackpoint set of buttons work. Then try turning off the trackpoint instead.
    Chances are one of the sets of buttons are broken and is interfering with normal operation.
    I get the left-click behaving as right-click behavior once in a blue moon, but it goes away with tapping right-click once.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Unable to play some movie from Netflix on my iPad. When I click on a movie an error message comes up which says "cannot play movie. Please try again". Can anyone assist me? I just upgraded to iOS 7.1. Netflix not able to find problem.

    Unable to play some movies from Netflix on my iPad. When I click on a movie an error message comes up "Cannot play movie. Please try again later." I contacted Netflix but have not been able the help so I am wondering if it's my iPad. I didn't have a problem before but I have recently upgraded to iOS 7.1. Also is a certain amount of storage needed to play a movie? About how much is that?

    Hello all,
    I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
    So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
    So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
    Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
    Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

  • Swing disabled components look and feel problem.

    Hi All,
    I have a Swing application. My system is recently upgraded to JRE 1.6 and I'm facing problem with look and feel of swing components when they are disabled. Color of disabled components is very faint and its being difficult to read the text in such disabled components. In JRE 1.4 this problem was not there. Please let me know what I can do to get the look and feel(Color and Font) of disabled components, same as JRE 1.4.
    Thanks

    Sandip_Jarad wrote:
    ..I have a Swing application. My system is recently upgraded to JRE 1.6 and I'm facing problem with look and feel of swing components when they are disabled. Which look and feel is the application using? As an aside, did it never occur to you to mention the PLAF?
    ..Color of disabled components is very faint and its being difficult to read the text in such disabled components. Why is it so gosh-darned important to read the text on a control that is (supposedly) not relevant or not available?
    ..In JRE 1.4 this problem was not there. Please let me know what I can do to get the look and feel(Color and Font) of disabled components, same as JRE 1.4. Here are some suggestions, some of them are actually serious. I'll leave it as an exercise for you, to figure out which ones.
    - Run the app. in 1.4.
    - Use a custom PLAF that offers a 'less faint' rendering of disabled components.
    - Use Motif PLAF (I haven't checked, but I bet that has not changed since 1.4).
    - Put the important text in a tool-tip.

  • Elitebook 8570w - Windows 7 - How to turn off light when touchpad disabled

    I much prefer to use the styk rather than the touch pad, and I lay my hands on the computer in such a way that I can accidentally trigger the touch pad when it is on.  So with laptops I usually just go to the device manager and disable the touch pad entirely.
    However, on my Elitebook 8570w, when I disable the touch pad, this extremely bright orange light comes on.  It's extremely annoying, especially in low light situations, where I often have to work with my laptop.
    How can I disable this light while the touchpad is disabled?

    Hello noshius,
    Your EliteBook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forum
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • T61 touchpad, disabling tapping

    I'm trying to figure out how to disable tapping on the touchpad on my T61.  I can't seem to get to the configuration for the touch pad.  I've tried installing the UltraNav driver and utility that I found on the lenovo site.  (e.g. http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67226).  The driver seems to be installed according to the windows device manager, but when I try to run the utility (UNAVOSD.exe) it says "UltraNav Driver is not installed".
    I'm not even sure if that utility is what I want to be using, as on other machines the synaptics configuration appears in the Mouse control panel, but on my T61 all I get is settings for sample rate, wheel detectection and input buffer length.
    Does anyone have some suggestions for what I should try next?

    Ok, I had a chance to take a look at my ThinkPad, I haven't touched it in a few weeks , but today I found it. Try this.
     -> Control Panel -> Mouse -> UltraNav tab -> TouchPad settings -> Tapping -> Enable
    This is where I have it.
    www.Maxi-Pedia.com - The web you always wanted to know about
    www.finance-management.cz - The web you need for your business

  • Please Dashboard app. is not stable on the screen. It appears and Disappears randomly on the screen. Disabling it would solve my problem but I still need it. What should i do? help me guys

    Dashboard.app is giving me problems. it appears and disappears at will. I don't wan to disable it too. Help me out please

    Did you try rebooting the iPad? You will need to have some battery power for this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This may be helpful
    iPhone, iPad or iPod touch: Not responding or does not turn on
    Frozen or unresponsive iPad - Apple
    iPad: Unable to update or restore

  • Touchpad disabled on KDE login

    Hi,
    this is driving me crazy: the touchpad is enabled in KDM, but during the KDE login the touchpad gets disabled. So I always have to open a konsole and do "xinput enable 12" (id of the touchpad).
    Can't figure out why it started happening.

    Not a fix, but as workaround you could add "xinput enable 12" to the kde autostart on "System settings -> Start & Shutdown [system administration section] ->  add program"
    pd: section names can vary, my kde isn't on english
    Last edited by mzneverdies (2013-03-20 10:57:19)

  • Issue with Elan Touchpad disabling with Toshiba Satellite P55W-B5112 after startup

    Upgraded the laptop from 8.1 to Windows 10 and after I rebooted it a couple of times, the cursor/touchpad becomes disabled after a few minutes.  I can go to settings and re-enable in Mouse settings, but then the left/right click pads don't work. I saw some older postings about this in a Windows community related to older builds of Windows 10 but would have thought this would be fixed by now.  Looked for newer drivers and not finding anything. Anyone else having this issue and figure out a way to fix it?

    Jerry_Lippey wrote:
     Satellite S55T-B5158 Downloads here. And put the part number (PSPQCU-004001) in here. Update the drivers and utilities for Windows 10.Jerry, any help for P55W-B users? this post is about this model but I see no solutions, this is frustrating! please help!!!

Maybe you are looking for