Touchpad doesn't work on touchscreen laptop

Hello everyone!
Installed Arch on my new laptop Samsung NP540U3C (Samsung Series 5 Ultrabook). It has touch screen (yep, not my preference), and there comes my first issue.
Everything went well and everything just works on command line, but... when I start any X program, X doesn't allow me to use touchpad. Touchscreen and external USB mice instead do work perfectly.
Although I like to use touchpad and external mouse, still while the touchscreen is there, I'd wish to be able to use it in addition to touchpad.
I would owe a great deal to anyone who points me to right direction!
-Akseli

Hi again!
After a little bit of investigating I realized that I hadn't installed Synaptics. Sorry for my newbieness!
-Akseli

Similar Messages

Fn + F6 to lock/unlock touchpad doesn't work with Windows 10

Hello,i have G580 i'v done an upgrade from 8.1 to windows 10so i'v have a small issue with touchpad :Fn+F6 to lock touchpad doesn't work when it was working as well in 8.1scrolling line at touchpad doesn't work to. so how to fix it, or will lenovo release drivers for windows 10 as she did for previous windowsis getting newer driver from elantech or synaptic website will resolve the problem ? cuz i did install 8.1 driver elantech and keyboard+mouse stopped working before reseting windows 10 upcoming driver. Best regards.

I have the same problem. Untilthey update the ELAN driver I go in to Settings, Devices, Mouse and Touchpad, Additional Mouse Options and disabel the ELAN driver. You can still turn it back on with Fn F6, but you have to go through the same steps again to turn it off. The nice thing is, it doesn't go back to enabled after awhile when you havent' been using the laptop.for awhile as it did before. The bad side is it takes about half a dozen key strokes to get to he disable. Hope this helps for now.

Touchpad doesn't work - HP Pavilion DV4 - 2120ca

Re: Pavilion DV4-2120ca
Touchpad doesn't work after cleaning out the dust collection in the fan, heat sink area. New Therma paste was applied.
Both the keyboard & touchpad were the 2 things that didn't work following reassembly. The keyboard didn't work but able to use USB wireless mouse. Couple days ago the replacement battery finally arrived, installed and charged for 12 hours. After restart, the keyboard works as it should.
Unfortunately, touchpad still doesn't work. The light switch above the touchpad works, clicking on it turns white & amber but any movement scrolling doesn't work.
We tried the following, but unsuccessful
double tapping top left corner
Hard Reset
Uninstalled ALPS & Synaptics -- reinstalled , restarted
Updated Windows, HP, BIOS, Drivers
Don't recall during reassembly if touchpad has a cable or connector. If so, perhaps worth try to disconnect & reconnect to ensure correct connection.
What do u advise to try next?
Thank u
~ Gayle ~

Did you connect the ribbon cable for the Touchpad. Often times there is one for the keyboard and one for the touchpad separately. Hopefully you have not damaged the ribbon cable. Just make sure you push it all the way in and seat it properly.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Satellite PRO A200-1S1 with Windows 7 x32. Touchpad doesn't work

Hi everybody
I Installed Windows 7 on my Satellite Pro A200-1S1, retrieved all the drivers on Toshiba site, everything works fine (less than the web camera that didn't work even with previous s.o. XP or Vista...). But my Touchpad doesn't work at all.... No Fn+F9, no driver, nothing works. And in my control panel-device manager seems to be everything ok.
Any suggestion?

Hi
Never had any problems with the touchpad using Win 7 32bit.
I recommend installing VAP (value added package) and Flash Card Support Utility to get the FN button functionality. Then you could try FN + F9
Both tools can be downloaded from Toshiba European driver page there you should choose Sat L500 series because I didnt find mentioned Win 7 software for A200 series.
Check also the touchpad drivers which I found in L500 download area (Alps a Synaptics)
<img src='http://img510.imageshack.us/img510/5830/capturelxz.jpg' border='0' width='550px'/>

Touchpad doesn't work in log in screen

Since I updated to Lion my Touchpad doesn't work in log in screen, I have to use the keyboard arrows to move around. I can't intall the recovery because the touchpad doesn't respond!!!! Please can someone help me on how can this be fixed?

try this http://support.apple.com/kb/ht1379 and let us know if it helps. It's supposed to reset mouse speed but we'll see if it solves other things too.

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

ITunes doesn't work on my laptop

ITunes doesn't work on my laptop. I tried older versions also. It gets stuck once I open it. I have Windows 7

Try working through this problesooting article:
http://support.apple.com/kb/TS1717
You need to establish if the problem is account specific or system wide and then check through the approriate section.
As a shot in the dark, some people have found the follow procedutre helps:
1. Quit iTunes.
2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> Right Click "Command Prompt" -> "Run as Administrator")
3. Once in the command prompt, type "netsh winsock reset" and hit ENTER.
4. Reboot your machine.
5. Restart iTunes.

Laptop Mouse touchpad doesn't work with Firefox 4

Previously in Firefox 3, I could use the touchpad on my laptop to middle click, and scroll. Now it won't work with Firefox 4. When I try to use the scroll feature it registers the mouse as scrolling, but the page doesn't move at all in Firefox. When I try to open a link in a new tab using middle click it shows the auto scroll but even then the orientation is wrong as well. When trying to close a tab using the middle click it shows the same left to right auto scroll instead. It works fine with a normal mouse, but with a touchpad it doesn't work at all. I have also tried using drivers to fix the problem, but that was not the issue.

well, if you stick to firefox 4, then i'd say, well, babylon in my memories, it offers a online prompt method of translation, supporting tens of languages, similar to google translate webpages, the url is http://translation.babylon.com/ you can keep firefox 3.x and 4.0 in the same time in your windows. firefox 3.x to 4.0 update is not compulsory, so use the one you feel good with.

Touchpad doesn't work anymore

Hello there,
I've a problem with my touchpad. It doesn't work anymore.
A few months ago I had a few problems with the touchpad. The cursor was running over the screen, random clicking some things. Sometimes it happened for an hour, sometimes for a few days, but it always stopped. Later it didn't disapear anymore. The touchpad isn't working at all, so I'm not able to work with it anymore. I already cleaned the touchpad from the outside and the inside., but there's no change. It's not so good that something important like that gets broken in such a short time, I have my laptop for two years now. I'm curious if there is a special guarantee for this, because I think this is not my fault. Maybe there is something wrong from the beginning or something.
Can anybody help me?
Thanks a lot.
Bye.

You can check your service and support coverage here.
I have my laptop for two years now.
Unless you purchased Apple care, the one year limited warranty has expired.

Touchpad doesn't work correctly

My touchpad isn't working correctly anymore.
i don't know if this is due to hardware or software but i will explain the problem and maybe someone can help me.
the pad is working correctly, so i can move the mouse, but when i try to push the touch pad it doesn't work anymore. i've already activated the touch option so that i can still whithout a usb mouse.
But please someone help me

If the click function is working with the tap, but not by physically clicking the touch pad, it is more than likely a hardware failure. Take it to the apple store for a diagnosis.

Synaptics Touchpad doesn't work correctly after update

I have a Lenovo T61 with 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 15 11:40:49 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux.
xf86-input-synaptics is installed, version 1.4.0-1
Since an update, I get the following error when running startx:
Query no synaptics: 6003C8
Touchpad unable to query/initialize Synaptics Hardware
PreInit returned NULL for "Touchpad"
That is a part of /var/log/Xorg.0.log. The module "synaptics" is loaded two times...
X.Org X Server 1.9.4.901 (1.9.5 RC 1)
Release Date: 2011-03-04
[ 19041.695] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 25 16:17:46 2011
[ 19041.716] (==) Using config file: "/etc/X11/xorg.conf"
[ 19041.736] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19041.757] (==) ServerLayout "Xorg Configured"
[ 19041.757] (**) |-->Screen "Screen0" (0)
[ 19041.757] (**) | |-->Monitor "Monitor0"
[ 19041.757] (**) | |-->Device "Card0"
[ 19041.757] (**) |-->Input Device "Keyboard0"
[ 19041.757] (**) |-->Input Device "USB Mouse"
[ 19041.757] (**) |-->Input Device "Touchpad"
[ 19041.757] (**) Option "DontZap" "False"
[ 19041.757] (**) Option "AllowMouseOpenFail" "true"
[ 19041.757] (**) Option "AutoAddDevices" "False"
[ 19041.757] (**) Option "AutoEnableDevices" "False"
[ 19041.757] (**) Not automatically adding devices
[ 19041.757] (**) Not automatically enabling devices
[ 19041.758] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 19041.758] (II) Loader magic: 0x81f3280
[ 19041.758] (II) Module ABI versions:
[ 19041.758] X.Org ANSI C Emulation: 0.4
[ 19041.758] X.Org Video Driver: 8.0
[ 19041.758] X.Org XInput driver : 11.0
[ 19041.758] X.Org Server Extension : 4.0
[ 19041.759] (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
[ 19041.759] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 19041.759] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "record" will be loaded by default.
[ 19041.759] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "dri2" will be loaded by default.
[ 19041.759] (II) LoadModule: "ddc"
[ 19041.759] (II) Module "ddc" already built-in
[ 19041.759] (II) LoadModule: "dbe"
[ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19041.759] (II) Module dbe: vendor="X.Org Foundation"
[ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.759] Module class: X.Org Server Extension
[ 19041.759] ABI class: X.Org Server Extension, version 4.0
[ 19041.759] (II) Loading extension DOUBLE-BUFFER
[ 19041.759] (II) LoadModule: "dri"
[ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 19041.759] (II) Module dri: vendor="X.Org Foundation"
[ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.759] ABI class: X.Org Server Extension, version 4.0
[ 19041.759] (II) Loading extension XFree86-DRI
[ 19041.759] (II) LoadModule: "extmod"
[ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19041.760] (II) Module extmod: vendor="X.Org Foundation"
[ 19041.760] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.760] Module class: X.Org Server Extension
[ 19041.760] ABI class: X.Org Server Extension, version 4.0
[ 19041.760] (II) Loading extension MIT-SCREEN-SAVER
[ 19041.760] (II) Loading extension XFree86-VidModeExtension
[ 19041.760] (II) Loading extension XFree86-DGA
[ 19041.760] (II) Loading extension DPMS
[ 19041.760] (II) Loading extension XVideo
[ 19041.760] (II) Loading extension XVideo-MotionCompensation
[ 19041.760] (II) Loading extension X-Resource
[ 19041.760] (II) LoadModule: "glx"
[ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19041.782] (II) Module glx: vendor="NVIDIA Corporation"
[ 19041.782] compiled for 4.0.2, module version = 1.0.0
[ 19041.782] Module class: X.Org Server Extension
[ 19041.782] (II) NVIDIA GLX Module 260.19.44 Sun Feb 27 21:47:21 PST 2011
[ 19041.782] (II) Loading extension GLX
[ 19041.782] (II) LoadModule: "synaptics"
[ 19041.782] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19041.782] (II) Module synaptics: vendor="X.Org Foundation"
[ 19041.782] compiled for 1.9.4, module version = 1.4.0
[ 19041.782] Module class: X.Org XInput Driver
[ 19041.782] ABI class: X.Org XInput driver, version 11.0
[ 19041.782] (II) LoadModule: "record"
[ 19041.782] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19041.783] (II) Module record: vendor="X.Org Foundation"
[ 19041.783] compiled for 1.9.4.901, module version = 1.13.0
[ 19041.783] Module class: X.Org Server Extension
[ 19041.783] ABI class: X.Org Server Extension, version 4.0
[ 19041.783] (II) Loading extension RECORD
[ 19041.783] (II) LoadModule: "dri2"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19041.783] (II) Module dri2: vendor="X.Org Foundation"
[ 19041.783] compiled for 1.9.4.901, module version = 1.2.0
[ 19041.783] ABI class: X.Org Server Extension, version 4.0
[ 19041.783] (II) Loading extension DRI2
[ 19041.783] (II) LoadModule: "nvidia"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 19041.783] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 19041.783] compiled for 4.0.2, module version = 1.0.0
[ 19041.783] Module class: X.Org Video Driver
[ 19041.783] (II) LoadModule: "kbd"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 19041.783] (II) Module kbd: vendor="X.Org Foundation"
[ 19041.783] compiled for 1.9.4, module version = 1.6.0
[ 19041.783] Module class: X.Org XInput Driver
[ 19041.783] ABI class: X.Org XInput driver, version 11.0
[ 19041.783] (II) LoadModule: "mouse"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 19041.784] (II) Module mouse: vendor="X.Org Foundation"
[ 19041.784] compiled for 1.9.4, module version = 1.7.0
[ 19041.784] Module class: X.Org XInput Driver
[ 19041.784] ABI class: X.Org XInput driver, version 11.0
[ 19041.784] (II) LoadModule: "synaptics"
[ 19041.784] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19041.784] (II) NVIDIA dlloader X Driver 260.19.44 Sun Feb 27 21:31:52 PST 2011
[ 19041.784] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 19041.784] (--) using VT number 7
[ 19041.891] (II) Loading sub module "fb"
[ 19041.891] (II) LoadModule: "fb"
[ 19041.891] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19041.891] (II) Module fb: vendor="X.Org Foundation"
[ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19041.891] (II) Loading sub module "wfb"
[ 19041.891] (II) LoadModule: "wfb"
[ 19041.891] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 19041.891] (II) Module wfb: vendor="X.Org Foundation"
[ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19041.891] (II) Loading sub module "ramdac"
[ 19041.891] (II) LoadModule: "ramdac"
[ 19041.891] (II) Module "ramdac" already built-in
[ 19048.959] (**) Option "CoreKeyboard"
[ 19048.959] (**) Keyboard0: always reports core events
[ 19048.959] (**) Option "Protocol" "standard"
[ 19048.959] (**) Option "XkbRules" "xorg"
[ 19048.959] (**) Option "XkbModel" "pc105"
[ 19048.959] (**) Option "XkbLayout" "de"
[ 19048.959] (WW) Option "XkbVariant" requires an string value
[ 19048.959] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 19048.983] (WW) USB Mouse: No Device specified, looking for one...
[ 19049.058] (II) USB Mouse: Setting Device option to "/dev/input/mice"
[ 19049.058] (--) USB Mouse: Device: "/dev/input/mice"
[ 19049.058] (==) USB Mouse: Protocol: "Auto"
[ 19049.058] (**) Option "SendCoreEvents" "true"
[ 19049.058] (**) Option "CorePointer"
[ 19049.058] (**) USB Mouse: always reports core events
[ 19049.058] (**) Option "Device" "/dev/input/mice"
[ 19049.191] (**) Option "Buttons" "5"
[ 19049.191] (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
[ 19049.191] (**) Option "ZAxisMapping" "4 5"
[ 19049.191] (**) USB Mouse: ZAxisMapping: buttons 4 and 5
[ 19049.191] (**) USB Mouse: Buttons: 9
[ 19049.191] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
[ 19049.191] (**) USB Mouse: (accel) keeping acceleration scheme 1
[ 19049.191] (**) USB Mouse: (accel) acceleration profile 0
[ 19049.191] (**) USB Mouse: (accel) acceleration factor: 2.000
[ 19049.191] (**) USB Mouse: (accel) acceleration threshold: 4
[ 19049.218] (II) USB Mouse: Setting mouse protocol to "ExplorerPS/2"
[ 19049.510] (II) USB Mouse: ps2EnableDataReporting: succeeded
[ 19049.510] (**) Option "Device" "/dev/input/mouse0"
[ 19049.521] (--) Touchpad: invalid x-axis range. defaulting to 1615 - 5685
[ 19049.521] (--) Touchpad: invalid y-axis range. defaulting to 1729 - 4171
[ 19049.521] (--) Touchpad: invalid pressure range. defaulting to 0 - 256
[ 19049.521] (--) Touchpad: invalid finger width range. defaulting to 0 - 16
[ 19049.521] (**) Option "SHMConfig" "on"
[ 19049.521] (**) Option "LeftEdge" "1300"
[ 19049.521] (**) Option "RightEdge" "5900"
[ 19049.521] (**) Option "TopEdge" "1100"
[ 19049.521] (**) Option "BottomEdge" "5200"
[ 19049.521] (**) Option "FingerLow" "25"
[ 19049.521] (**) Option "FingerHigh" "30"
[ 19049.521] (**) Option "MaxTapTime" "180"
[ 19049.521] (**) Option "MaxTapMove" "220"
[ 19049.521] (**) Option "VertScrollDelta" "100"
[ 19049.521] (**) Option "VertTwoFingerScroll" "on"
[ 19049.521] (**) Option "MinSpeed" "0.06"
[ 19049.521] (**) Option "MaxSpeed" "0.6"
[ 19049.521] (**) Option "AccelFactor" "0.0040"
[ 19049.541] (EE) Query no Synaptics: 6003C8
[ 19049.541] (--) Touchpad: no supported touchpad found
[ 19049.542] (EE) Touchpad Unable to query/initialize Synaptics hardware.
[ 19049.558] (EE) PreInit returned NULL for "Touchpad"
Running synclient returns the following:
Couldn't find synaptics properties. No synaptics driver loaded?
Running syndaemon returns the following:
Unable to find a synaptics device.
The Touchpad is still working, but changing options in the xorg.conf or the 10-synaptics.conf doesn't have any effect anymore. For example, I can not enable VertTwoFingerScroll, what was no problem before the error occured.
The section for the touchpad in /proc/bus/input/devices is the following:
I: Bus=0011 Vendor=0002 Product=0007 Version=81b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5
U: Uniq=
H: Handlers=mouse0 event5
B: EV=b
B: KEY=6420 0 30000 0 0 0 0 0 0 0 0
B: ABS=11000003
I tried the following:
Removing the 10-synaptics.conf and commenting out the touchpad-section in the 10-evdev.conf
Adding the line MatchDevicePath "/dev/input/event*" to the 10-synaptics.conf
Thanks for help

I commented the whole
#Section "InputDevice"
# Identifier "Synaptics Touchpad"
#EndSection
part
and the appropiate line
#InputDevice "Synaptics Touchpad" "SendCoreEvents"
on Sever Layout.
It stopped the EE error, touchpad works here
but it's reverted to old "typing=accidentally doing clicks" since it got way too sensitive
I can't run gsynaptics , synclient or syndaemon to fix it (as I used to)
since I get
drini ~ $ synclient
Couldn't find synaptics properties. No synaptics driver loaded?

Touchpad doesn't work after changing from Vista to XP Satellite A210

Hi everybody!
I have changed Windows and now something is wrong with Touchpad. It works only as a mouse (cursor moves, right and left buttons are also ok).
Before with Vista I had email button, wireless connection, something else and sound changing, and plus it had extra blue light. Now these buttons are not active and no etrxa light.
Laptop Satellite A210.
I've tried all possible drivers already but maybe you could advice me something else.
thanks in advance!

please try this one
http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20070809133247.zip
and give us feedback if this driver helps or not
thx

Z580 - touchpad doesn't work properly on Windows 10

hello. I did Windows 10 clean install on my Z580 and I noticed there are some minor flaws regarding touchpad, namely: 1. one finger edge scrolling doesn't work. only two finger scrolling is available2. two finger tap doesn't open context menu, even though the option is enabled in Synaptics settings the touchpad is made by Synaptics and I'm using drivers that got installed via Windows Update (version 19.0.9.5)

It is really strange. Have you installed something that can have negative influence on well working Synaptics driver?
> What can I do to ensure that the problem is solved for every time?
Thats good question. Only thing you can do and be sure everything will be OK is to install original recovery image you got with your notebook. At this point everything should work properly.
I don't know what are you doing later but for me it sounds like some drivers conflict.
Sorry but on this virtual way it is not possible to be more specific.

Fn+F5 function and touchpad doesn't work correctly on Satellite A series

Hi
I just setup a windows Vista & I install the driver after download it from the net but i found that;
1- the switch between the screen & s-video (fn + f5) doesn't work but the other function (fn) work
2- when i put my finger in the right of the mouse pad it must scroll the screen & in the bottom of the pad it must scroll left & right the screen but it didn't work
So plz tell me the solution if it is a program or driver issue.
Plz give me the direct link
thinku

Hi
What notebook do you have?
I presume your notebook was delivered with XP and now you want to use it with Vista OS.
Please note that you need to install the Toshiba Vista Value Added Package to use all the notebook features.
Very important is the Components Common Driver and the TOSHIBA Flash Cards.
The Flashcards provides the Hotkey function and the launcher function that starts the Hotkey function.
Please reinstall it!
The additional touchpad functionality must be configured firstly!
This can be done in control panel -> mouse
There you should look for the touchpad settings and could configure the touchpad scroll areas again.
Bye

Touchpad doesn't work properly after using of mouse.

On my macbook air I usually use touchpad only. But I use mouse to play games.
Sometimes when I do it, then exit the game, touchpad stops to work properly.
Mainly it works like usual, I can open files, close windows, follow links in Safari. But I can not close tabs (the x-mark doesn't apper). Also I can't select text with touchpad (only one work, by double clicking). Also I can't open sites via top sites panel, by clicking on them - only with keyboard. Probably there more small, but unpleasant things?
What can I do?
Reboot does help, but I don't want to reboot each time I play a game...

If you installed any software to work with the mouse, remove it according to the developer's instructions, then restart the computer and test. Back up all data before making any changes.

Touchpad doesn't work on touchscreen laptop

Similar Messages

Maybe you are looking for