Touchpad doesn't work properly after using of mouse.

On my macbook air I usually use touchpad only. But I use mouse to play games.
Sometimes when I do it, then exit the game, touchpad stops to work properly.
Mainly it works like usual, I can open files, close windows, follow links in Safari. But I can not close tabs (the x-mark doesn't apper). Also I can't select text with touchpad (only one work, by double clicking). Also I can't open sites via top sites panel, by clicking on them - only with keyboard. Probably there more small, but unpleasant things?
What can I do?
Reboot does help, but I don't want to reboot each time I play a game...

If you installed any software to work with the mouse, remove it according to the developer's instructions, then restart the computer and test. Back up all data before making any changes.

Similar Messages

  • My touchpad is not working anymore after using usb mouse for a while

    I have been using usb mouse for a couple days now I only can use usb mouse because my touchpad is not working. its like it is disabled or something.
    I have asus k55v (windows 8.1)
    pleasseeee help !!!!

    Check the settings:
    Press FN+F9 or hotkey to turn on touchpad.
    If the problem persists then enter the BIOS and make sure BIOS is set to default.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • Stream video doesn't work properly  after update to OS Mavericks

    after update to OS Mavericks stream video doesn,t work properly!!!  doesn't loaded stream video and stream audio from web sites (youtube, or other with stream video).

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        http://get.adobe.com/flashplayer/?PID=7105813 
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

  • My Safari doesn't work properly after installing Lion.  Don't like it, how can I uninstall? (Cloud not worth it)?

    I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac.  My Safari doesn't work properly anymore.  Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall?  Thanks,

    Wipe the drive clean and install Snow Leopard from your install disk.
    Might be less work fixing Safari. Try Resetting Safari.

  • Z580 - touchpad doesn't work properly on Windows 10

    hello. I did Windows 10 clean install on my Z580 and I noticed there are some minor flaws regarding touchpad, namely: 1. one finger edge scrolling doesn't work. only two finger scrolling is available2. two finger tap doesn't open context menu, even though the option is enabled in Synaptics settings the touchpad is made by Synaptics and I'm using drivers that got installed via Windows Update (version 19.0.9.5)

    It is really strange. Have you installed something that can have negative influence on well working Synaptics driver?
    > What can I do to ensure that the problem is solved for every time?
    Thats good question. Only thing you can do and be sure everything will be OK is to install original recovery image you got with your notebook. At this point everything should work properly.
    I don't know what are you doing later but for me it sounds like some drivers conflict.
    Sorry but on this virtual way it is not possible to be more specific.

  • Keyboard on Sat Pro 6100 doesn't work properly after remedial work

    Hi,
    My Sat Pro 6100 has just been away for the usual motherboard and power board replacement with Toshiba, but now I have a strange keyboard problem.
    When I turn it on, all the keys work. After a few minutes, '3' doesn't work, then 'r' fails, then '5','7','8','9','0' stop working. At this stage I can feel something getting very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with an external PS2 keyboard, and the internal keyboard is still faulty (some keys work, others don't) but the external one works correctly.
    Now if the pc didn't get so hot under the middle of the internal keyboard, then I would conclude that the keyboard was faulty, but for it to fail slowly and sequentially like this, and it fails the same way every day (Since the Toshiba rebuild!).
    Maybe, internal keyboard controller overheating?
    Does anyone know what this might be? :-(
    Cheers,
    Homer

    Right under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs into the same card). It is normal that this part becomes warm during usage.
    It's strange that your problem appears after a while and not right away.
    It might be just an improper reseating of the keyboard cable (it's a thin layer like a photo film-negative) that easily pops out, but... it can be something more serious, too. (Especially since you had the upgrade done where hardware had to be changed)
    I would consult the service center once again and ask for instructions how to deal with this. Don't ignore it (by using an external keyboard instead of the malfunctioning internal) as it might end up into something more serious soon...
    Regards
    electrochain
    P.S. Please keep us updated on your steps

  • Gif doesn't work properly after saving to web?

    I've taken a gif from the internet, cropped it, and plan to use it somewhere. The Gif works perfectly when I view it in Photoshop, but once I save it for web and view it through a browser, it doesn't work. How would I fix this? (I apologize for being rather vague)
    Here is the original gif, and what I'd like the finished product to look like :
    And here is what I'm getting after messing around with it :

    Hi,
    With iChat Quit.
    GO to the Applications/Utilities folder and launch Activity Monitor.
    In Here find IMAgent in the list.
    Use the Quit Button top left (And confirm Force Quit.)
    Launch iChat.
    8:54 PM      Thursday; October 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Synaptics Touchpad doesn't work correctly after update

    I have a Lenovo T61 with 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 15 11:40:49 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux.
    xf86-input-synaptics is installed, version 1.4.0-1
    Since an update, I get the following error when running startx:
    Query no synaptics: 6003C8
    Touchpad unable to query/initialize Synaptics Hardware
    PreInit returned NULL for "Touchpad"
    That is a part of /var/log/Xorg.0.log. The module "synaptics" is loaded two times...
    X.Org X Server 1.9.4.901 (1.9.5 RC 1)
    Release Date: 2011-03-04
    [ 19041.695] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 25 16:17:46 2011
    [ 19041.716] (==) Using config file: "/etc/X11/xorg.conf"
    [ 19041.736] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 19041.757] (==) ServerLayout "Xorg Configured"
    [ 19041.757] (**) |-->Screen "Screen0" (0)
    [ 19041.757] (**) | |-->Monitor "Monitor0"
    [ 19041.757] (**) | |-->Device "Card0"
    [ 19041.757] (**) |-->Input Device "Keyboard0"
    [ 19041.757] (**) |-->Input Device "USB Mouse"
    [ 19041.757] (**) |-->Input Device "Touchpad"
    [ 19041.757] (**) Option "DontZap" "False"
    [ 19041.757] (**) Option "AllowMouseOpenFail" "true"
    [ 19041.757] (**) Option "AutoAddDevices" "False"
    [ 19041.757] (**) Option "AutoEnableDevices" "False"
    [ 19041.757] (**) Not automatically adding devices
    [ 19041.757] (**) Not automatically enabling devices
    [ 19041.758] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 19041.758] (II) Loader magic: 0x81f3280
    [ 19041.758] (II) Module ABI versions:
    [ 19041.758] X.Org ANSI C Emulation: 0.4
    [ 19041.758] X.Org Video Driver: 8.0
    [ 19041.758] X.Org XInput driver : 11.0
    [ 19041.758] X.Org Server Extension : 4.0
    [ 19041.759] (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
    [ 19041.759] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 19041.759] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "record" will be loaded by default.
    [ 19041.759] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "dri2" will be loaded by default.
    [ 19041.759] (II) LoadModule: "ddc"
    [ 19041.759] (II) Module "ddc" already built-in
    [ 19041.759] (II) LoadModule: "dbe"
    [ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 19041.759] (II) Module dbe: vendor="X.Org Foundation"
    [ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.759] Module class: X.Org Server Extension
    [ 19041.759] ABI class: X.Org Server Extension, version 4.0
    [ 19041.759] (II) Loading extension DOUBLE-BUFFER
    [ 19041.759] (II) LoadModule: "dri"
    [ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 19041.759] (II) Module dri: vendor="X.Org Foundation"
    [ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.759] ABI class: X.Org Server Extension, version 4.0
    [ 19041.759] (II) Loading extension XFree86-DRI
    [ 19041.759] (II) LoadModule: "extmod"
    [ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 19041.760] (II) Module extmod: vendor="X.Org Foundation"
    [ 19041.760] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.760] Module class: X.Org Server Extension
    [ 19041.760] ABI class: X.Org Server Extension, version 4.0
    [ 19041.760] (II) Loading extension MIT-SCREEN-SAVER
    [ 19041.760] (II) Loading extension XFree86-VidModeExtension
    [ 19041.760] (II) Loading extension XFree86-DGA
    [ 19041.760] (II) Loading extension DPMS
    [ 19041.760] (II) Loading extension XVideo
    [ 19041.760] (II) Loading extension XVideo-MotionCompensation
    [ 19041.760] (II) Loading extension X-Resource
    [ 19041.760] (II) LoadModule: "glx"
    [ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 19041.782] (II) Module glx: vendor="NVIDIA Corporation"
    [ 19041.782] compiled for 4.0.2, module version = 1.0.0
    [ 19041.782] Module class: X.Org Server Extension
    [ 19041.782] (II) NVIDIA GLX Module 260.19.44 Sun Feb 27 21:47:21 PST 2011
    [ 19041.782] (II) Loading extension GLX
    [ 19041.782] (II) LoadModule: "synaptics"
    [ 19041.782] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 19041.782] (II) Module synaptics: vendor="X.Org Foundation"
    [ 19041.782] compiled for 1.9.4, module version = 1.4.0
    [ 19041.782] Module class: X.Org XInput Driver
    [ 19041.782] ABI class: X.Org XInput driver, version 11.0
    [ 19041.782] (II) LoadModule: "record"
    [ 19041.782] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 19041.783] (II) Module record: vendor="X.Org Foundation"
    [ 19041.783] compiled for 1.9.4.901, module version = 1.13.0
    [ 19041.783] Module class: X.Org Server Extension
    [ 19041.783] ABI class: X.Org Server Extension, version 4.0
    [ 19041.783] (II) Loading extension RECORD
    [ 19041.783] (II) LoadModule: "dri2"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 19041.783] (II) Module dri2: vendor="X.Org Foundation"
    [ 19041.783] compiled for 1.9.4.901, module version = 1.2.0
    [ 19041.783] ABI class: X.Org Server Extension, version 4.0
    [ 19041.783] (II) Loading extension DRI2
    [ 19041.783] (II) LoadModule: "nvidia"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 19041.783] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 19041.783] compiled for 4.0.2, module version = 1.0.0
    [ 19041.783] Module class: X.Org Video Driver
    [ 19041.783] (II) LoadModule: "kbd"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    [ 19041.783] (II) Module kbd: vendor="X.Org Foundation"
    [ 19041.783] compiled for 1.9.4, module version = 1.6.0
    [ 19041.783] Module class: X.Org XInput Driver
    [ 19041.783] ABI class: X.Org XInput driver, version 11.0
    [ 19041.783] (II) LoadModule: "mouse"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 19041.784] (II) Module mouse: vendor="X.Org Foundation"
    [ 19041.784] compiled for 1.9.4, module version = 1.7.0
    [ 19041.784] Module class: X.Org XInput Driver
    [ 19041.784] ABI class: X.Org XInput driver, version 11.0
    [ 19041.784] (II) LoadModule: "synaptics"
    [ 19041.784] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 19041.784] (II) NVIDIA dlloader X Driver 260.19.44 Sun Feb 27 21:31:52 PST 2011
    [ 19041.784] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 19041.784] (--) using VT number 7
    [ 19041.891] (II) Loading sub module "fb"
    [ 19041.891] (II) LoadModule: "fb"
    [ 19041.891] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 19041.891] (II) Module fb: vendor="X.Org Foundation"
    [ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 19041.891] (II) Loading sub module "wfb"
    [ 19041.891] (II) LoadModule: "wfb"
    [ 19041.891] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 19041.891] (II) Module wfb: vendor="X.Org Foundation"
    [ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 19041.891] (II) Loading sub module "ramdac"
    [ 19041.891] (II) LoadModule: "ramdac"
    [ 19041.891] (II) Module "ramdac" already built-in
    [ 19048.959] (**) Option "CoreKeyboard"
    [ 19048.959] (**) Keyboard0: always reports core events
    [ 19048.959] (**) Option "Protocol" "standard"
    [ 19048.959] (**) Option "XkbRules" "xorg"
    [ 19048.959] (**) Option "XkbModel" "pc105"
    [ 19048.959] (**) Option "XkbLayout" "de"
    [ 19048.959] (WW) Option "XkbVariant" requires an string value
    [ 19048.959] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    [ 19048.983] (WW) USB Mouse: No Device specified, looking for one...
    [ 19049.058] (II) USB Mouse: Setting Device option to "/dev/input/mice"
    [ 19049.058] (--) USB Mouse: Device: "/dev/input/mice"
    [ 19049.058] (==) USB Mouse: Protocol: "Auto"
    [ 19049.058] (**) Option "SendCoreEvents" "true"
    [ 19049.058] (**) Option "CorePointer"
    [ 19049.058] (**) USB Mouse: always reports core events
    [ 19049.058] (**) Option "Device" "/dev/input/mice"
    [ 19049.191] (**) Option "Buttons" "5"
    [ 19049.191] (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
    [ 19049.191] (**) Option "ZAxisMapping" "4 5"
    [ 19049.191] (**) USB Mouse: ZAxisMapping: buttons 4 and 5
    [ 19049.191] (**) USB Mouse: Buttons: 9
    [ 19049.191] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
    [ 19049.191] (**) USB Mouse: (accel) keeping acceleration scheme 1
    [ 19049.191] (**) USB Mouse: (accel) acceleration profile 0
    [ 19049.191] (**) USB Mouse: (accel) acceleration factor: 2.000
    [ 19049.191] (**) USB Mouse: (accel) acceleration threshold: 4
    [ 19049.218] (II) USB Mouse: Setting mouse protocol to "ExplorerPS/2"
    [ 19049.510] (II) USB Mouse: ps2EnableDataReporting: succeeded
    [ 19049.510] (**) Option "Device" "/dev/input/mouse0"
    [ 19049.521] (--) Touchpad: invalid x-axis range. defaulting to 1615 - 5685
    [ 19049.521] (--) Touchpad: invalid y-axis range. defaulting to 1729 - 4171
    [ 19049.521] (--) Touchpad: invalid pressure range. defaulting to 0 - 256
    [ 19049.521] (--) Touchpad: invalid finger width range. defaulting to 0 - 16
    [ 19049.521] (**) Option "SHMConfig" "on"
    [ 19049.521] (**) Option "LeftEdge" "1300"
    [ 19049.521] (**) Option "RightEdge" "5900"
    [ 19049.521] (**) Option "TopEdge" "1100"
    [ 19049.521] (**) Option "BottomEdge" "5200"
    [ 19049.521] (**) Option "FingerLow" "25"
    [ 19049.521] (**) Option "FingerHigh" "30"
    [ 19049.521] (**) Option "MaxTapTime" "180"
    [ 19049.521] (**) Option "MaxTapMove" "220"
    [ 19049.521] (**) Option "VertScrollDelta" "100"
    [ 19049.521] (**) Option "VertTwoFingerScroll" "on"
    [ 19049.521] (**) Option "MinSpeed" "0.06"
    [ 19049.521] (**) Option "MaxSpeed" "0.6"
    [ 19049.521] (**) Option "AccelFactor" "0.0040"
    [ 19049.541] (EE) Query no Synaptics: 6003C8
    [ 19049.541] (--) Touchpad: no supported touchpad found
    [ 19049.542] (EE) Touchpad Unable to query/initialize Synaptics hardware.
    [ 19049.558] (EE) PreInit returned NULL for "Touchpad"
    Running synclient returns the following:
    Couldn't find synaptics properties. No synaptics driver loaded?
    Running syndaemon returns the following:
    Unable to find a synaptics device.
    The Touchpad is still working, but changing options in the xorg.conf or the 10-synaptics.conf doesn't have any effect anymore. For example, I can not enable VertTwoFingerScroll, what was no problem before the error occured.
    The section for the touchpad in /proc/bus/input/devices is the following:
    I: Bus=0011 Vendor=0002 Product=0007 Version=81b1
    N: Name="SynPS/2 Synaptics TouchPad"
    P: Phys=isa0060/serio1/input0
    S: Sysfs=/devices/platform/i8042/serio1/input/input5
    U: Uniq=
    H: Handlers=mouse0 event5
    B: EV=b
    B: KEY=6420 0 30000 0 0 0 0 0 0 0 0
    B: ABS=11000003
    I tried the following:
    Removing the 10-synaptics.conf and commenting out the touchpad-section in the  10-evdev.conf
    Adding the line MatchDevicePath "/dev/input/event*" to the 10-synaptics.conf
    Thanks for help

    I commented the whole
    #Section "InputDevice"
    #       Identifier  "Synaptics Touchpad"
    #EndSection
    part
    and the appropiate line
            #InputDevice "Synaptics Touchpad" "SendCoreEvents"
    on Sever Layout.
    It stopped the EE error, touchpad works here
    but it's reverted to old "typing=accidentally doing clicks" since it got way too sensitive
    I can't run gsynaptics , synclient or syndaemon to fix it (as I used to)
    since I get
    drini ~ $ synclient
    Couldn't find synaptics properties. No synaptics driver loaded?

  • SSAS Display Folders not working properly after using Translations

    Hi
    I have a Cube with many fact tables and each having many measures.So for user convience i have created display folder for measures inside measure groups and everything was working fine.
    But now i have created Translation (English(United States)) for measures,Calculated member and Dimensions and Processed.I observed that the display folders are working for calculated measures but weirdly the other measures display folder property is not
    getting applied.
    Please let me know if anybody came cross this and fixed.

    Hi Hrehaan,
    According to your description, your display folders in not working after using translation. Right?
    In Analysis Services, this is a known bug. However, we have workaround for this issue.
    Solution:
    1. Locate your cube in Solution Explorer
    2. Right click on it and choose 'View code'
    3. Find the corresponding <Translation> tag - look for the Foreign name of your Calculated member
    4. Below the <Caption> tag place a line with <DisplayFolder> tag. The properties within Translation tag should look like:
                  <Language>1001</Language>
                  <Caption>Foreign name of Calculated member</Caption>
                  <DisplayFolder>Foreign name for the display folder</DisplayFolder>
    5. Repeat for all your calculated members.
    Please refer to the link below:
    No display folder translations on the calculated members
    If you have any question, please feel free to ask.
    Simon Hou
    TechNet Community Support

  • Photoshop CS5 doesn't work properly after opening too many images

    Hi
    This is my very first post.
    I'm also new to CS5. I do hundreds of photo touching/cropping that is a part of my job for web.
    Everything is running fine but when ever I open too many images in Photoshop CS5 it doesn't work, I mean it doesn't hang or freezes it just open all files and then doesn't show any images (just blank) and when I closes 20/30 or more images then it get fine.
    I thought it might a RAM problem but i have i3 processor with 4GB of RAM. I have also increased memory usage from 60% to 80% but I'm still facing the same problem.
    Would like to tell that in the previous version of CS3 I never got this problem and worked fine.
    thanks
    --Venkat

    Disabling OpenGL entirely is draconian.
    You could try, if it's not already set that way, going into the Advanced settings and switching OpenGL to "Basic" mode, which uses fewer resources.
    -Noel

  • GPS location doesn't work properly after shift WIFI device to new office

    GPS worked well before my office moves to new location. This month, WIFI and other network devices were moved to a new location because of office relocation, but GPS location on google maps and other apps still display as before, even I turn off the WIFI. Only if I go out the office, the GPS works properly.

    Means that the office is so heavily shielded that GPS signals are not getting in AND the WiFi access points are not in Apple's database. Do you have cellular data enabled? That's a third way these phones try to guesstimate position based on celltower signal strength.
    But if you're in a high security facility, none of the above will work. That would be the way it is designed.

  • GPS DOESN'T WORK PROPERLY AFTER UPGRADE TO 2.2

    I just upgraded to the version 2.2 software. Since updating, my 3G GPS is not working correctly...anyone else? Location Services are turned ON, but now the locater is only finding my general location...acurate to about 1/2 mile. Before the update, my GPS was locating to about 300 feet at this same location. I suspect that the GPS is not kicking in and the phone is locating postion from WiFi and Cell towers. Any ideas anyone??

    My 3G GPS isn't working properly either and if I turn it on, I am unable to receive incoming SMS messages - - if I am able to receive them they are many hours or a day late or worse, it never arrives. I tried sending SMS message to myself but it never returned. Outgoing SMS and incoming/ougoing calls are fine though.
    So what I did now was to switch off 3G so I am now left with an expensive regular cellphone with no internet capability. Bummer. Not what I really want - I would have settled for a Sony Ericsson instead if all I want is just a regular cellphone.

  • Finder doesn't work properly after waking up from sleep?

    I have a brand new MacBook Pro with Lion installed on it. It travels back and forth from home to work with me, and at work I plug it in to an Apple Display. When I leave work, I put the laptop to sleep and take it home. At home, when it wakes up from sleep, the finder does not work properly. Often, I cannot see any finder windows, and mission control does not show my various desktops, and only shows open applications. I have already tried throwing away the com.apple.finder.plist file, and it did not help.
    Any suggestions are appreciated.

    Yes, change your display / colour profile to a different (or the default) profile. Has worked for myself, and many others on other forums.
    Hope that helps...
    D.

  • IChat doesn't work properly after upgrading to 10.7.2

    It just doesn't connect to my gmail chat account.
    No error message or anything. It just sits there with that " ~ " symbol near where it says "offline".
    What to do?
    Trying to connect / disconnect doesn't do anything.

    Hi,
    With iChat Quit.
    GO to the Applications/Utilities folder and launch Activity Monitor.
    In Here find IMAgent in the list.
    Use the Quit Button top left (And confirm Force Quit.)
    Launch iChat.
    8:54 PM      Thursday; October 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • Receiver Determination in BPM - Correct me

    Hi everyone, I came accross some document saying that <b>every send/ receive step in BPM, there should be one receiver determination.</b> Can anyone explain this to me. thanks, -Naveen.

  • Is this really a "bug" in dba_tab_columns?

    Hi Guys, it's Xev. I have been struggling with this for weeks now. No matter what I do, I cannot get my procedure to see dba_tab_columns inside of my procedure at run-time. It just blows up and says "cannot see table or view", that generic answer. Is

  • Customers updating their own sales forecast

    Hi, Are you aware of any scenario, where I can have the customers entering their sales forecast in the BW System. Any clues? Thanks, Harish

  • What is the Learning Process for SAP Business ByDesign

    Hi Experts, What is the Learning Process for SAP Business ByDesign Prashant Kapoor

  • CLM Contract Document Work flow ISSUE

    Hi Experts, I am facing an issue with approvers collaborator in Agreements i.e. if am  processed workflow consecutively in two contract documents against an Agreement . at a time it is showing only one approver but it should show two approvers in col