Touchpad drivers installation for Mini 110

Have a HP Mini 110 1030NR PC, with XP. Where do I find the latest drivers for my touchpad? How do I install the new drivers?

You can download the touchpad driver from here... ftp://ftp.hp.com/pub/softpaq/sp43501-44000/sp43663.exe
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Similar Messages

What is the brand for mini 110-4111ej Hard drive?

What is the brand for mini 110-4111ej Hard drive?
This question was solved.
View Solution.

HP uses different brands to fit the need for the SATA hard disk, so there is no specific brand that I can state. Why don't you use the hard disk test that is present in the BIOS?
Replacement hard disk specifications
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need webcam software for MINI 110-3138 tu

My HP webcam software has been removed from my 110-3180 TU. Do you have a free download to allow me to use the webcam?
Thank you
Martin

Hi:
See if this software will work for you...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117932-1&cc=us&dlc=en&lc=en...

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

HELP! sata 3 ssd for hp mini 110-3118cl netbook, but i can't install windows xp on it.

Greetings, I recently bought an ocztech sata III ssd for my hp mini 110-3118cl but I can't install windows xp on it. I have the xp sp3 install version with SATA drivers pre-packed. When the setup goes through the first re-start, it stops, shuts down and re-starts. It also displayed an error at the beggining signaling something missing
SSd's are very expensive and i exclusively want XP, not 7. Any help?
hp mini 110-3118cl
windows xp 32-bit

Hi:
It is possible that the NM10 ACHI drivers are not part of that package though.
Please read this guide for slipstreaming drivers into a copy of your installation disk and see if that works.
http://www.mediafire.com/?z41dc9tyx4jyyys
Paul

Exactly what partitions is the BIOS checking for when starting a HP mini 110?

My niece has a HP mini 110 that failed one day. On doing a bios hard drive check it failed (7 on read). I though I'd have to get a new one so I ordered another. While waiting for this to arrive I got access to a SATA usb bridge and as the opperating system was beyond repair and the disk unreadable by the HP mini, I decided to try to repair the disk. So I reformatted the old drive using my desktop computer. Windows had no problems with the drive and it seemed to run fine.
I also had to order the recovery disks (windows 7 intro).
Anyway on trying to reinstall using the recovery disks via USB DVD drive. It kept coming back with error 17 - which I found to be a hard drive error. I also tried installing using a Windows XP installation disk and this was more self explanatory it said there was either NO hard drive installed - or 'it didn't match the hardware specs for the unit' (or words to that effect)
On getting the new hard drive - same problem. Even though both of these hard drives work as USB drives connected to my main desk. SO, my conclusion is that on boot up the BIOS inspects the hard drive, checks to see the configuration of the formatting. i.e. the size and partitions etc. and when these are not matching the BIOS idea of proper specs it rejects the hard drive and considers there is none installed. Or perhaps there needs to be some basic files on the hard drive. Whatever the case, the bios concludes there is no hard drive and will always return a 'fail' in the bios hard drive test.
Any ideas on this? I need to find out exactly what partitions are expected by the bios. Does anyone have these specs, or perhaps you have a HP mini and can examine your hard drive and tell me the partition amounts and sizes?
Unless I can get the bios to recognise the hard drive I can't see how I can reinstall the OS on to it. Any and all help much appreciated.
Thanks
When it comes to fixing computers the longest word in the English language is "JUST" . . . as in 'you just do that and it will work' :-)

beevo you have used your logic to come up with the answer but in this case you are just a little bit off. The hard drive error you see in the BIOS is a SMART error. This is read out by a chip inside the hard drive itself working in conjunction with the BIOS. The chip stores data and is constantly testing the drive and if the read time or seek time or such such parameter is out of whack it reports that to the BIOS and you get a SMART error. It is a pure hardware thing and has nothing to do with any partition scheme or anthing else to do with the actual contents of the drive. A blank hard drive (written with all 0s) will still throw off a SMART error if there is such an error. SMART errors vary in severity but my rule of thumb and the mainstream thinking on this is treat a SMART error like a diagnosis of an incurable cancer. The patient might live a while but his days are numbered. Back up, as stated above, and buy a new hard drive which you have apparently already done.
A drive with errors will sometimes format fine in Windows and work just fine as an external type drive with a usb connection but you would not want to use it for an operating system.
The fact that WIndows XP is not seeing the drive on installation is a Windows XP thing. Windows XP does not recognize SATA hard drives. You need to slipstream in a SATA driver while you run XP installation by either modifying the install CD or using a usb external floppy disk.
To be clear, have you tried the recovery disks with the new hard drive and you still get the error or you have only tried to install XP on the new drive? If you are getting the error 7 with the new drive, you may have bigger problems such as a bad storage controller on the motherboard. That kind of error can cause the BIOS to read out a SMART error, too. You might want to try a hard reset on the computer by removing battery and AC adapter, hold down the power button 30 seconds and then try to start it with the AC attached. You can also boot it with no hard drive in and try resetting the BIOS to default settings and try the hard drive again.
Also to be clear, is the error 7 actually showing up in the BIOS or is it showing up during installation from the recovery disks? Are the recovery disks Windows 7 or XP?

HP Mini 110-1033ca don't want to install the IDT Audio Drivers.

Hello everyone.
I brought a new HP Mini 110-1033ca from Casco in Canada when i visited my Godmother. Now i am back home in Germany and i installed Vista on it.
Everything got discovered properly and everything works. Except the Audio!
I downloaded the IDT Drivers on the HP Webpage and installed them as told in the instructions. But after starting the Setup with the IDT Splash Screen an Error Message came up saying, The detected Hardware is not supported by this IDT-Softwarepackage. Now i redownloaded it and tried it several times, but always the same Message. I even tried to install the Drivers from the swsetup folder manually with the Device Manager but the Device Manager says, the operation was just denied.
Now i was pretty much confused what to do.. I looked up several things in the Internet, tried different Drivers and stuff, i really tried everything i can imagine to get this baby to work, but i couldn't figure it out how to get the Audio Device run.
I have no idea how to fix it, because the Drivers from the HP page which are for this Netbook tell me they aren't so please, if you have any idea please help me.
Thank you very much and sorry for my bad english (still learning it)
Pimpmuckl

@Mortlake,
Hi,
On Your old HDD, on partition C there may be folder SWSetup. There are always all extracted SP files with drivers. If You have it find there audio driver and paste here which was for Your audio (Full name of catalog. Example: Sp23142. Something like this. )
@Pimpmuckl
Hi,
I will try to solve this issue.
I'm not HP employee and this is user to user forum.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Touchpad drivers not installing for U310 Touch on Windows 7

My wife got a U310 Touch today which is a nice little computer. However it came with Windows 8 and she prefers Windows 7, so I took care of clearing the hard drive and installing Windows 7. We installed all the Windows 7 drivers from the Lenovo support site however the touchpad drivers fail to install. I tried manually installing the Synaptec drivers but it told me I don't have a Synaptec device. I then installed the Cypress drivers manually and rebooted but then the trackpad doesn't work at all.
I looked in Device Manager and the Hardware ID for the PS/2 Compatible Mouse says SYN2B0B which appears by all internet research to be a Synaptics hardware ID, which would make it understandable that the Cypress driver didn't work but really irritating that the Synaptics installer won't run because it says I don't have a Synaptics device.
What should I do? The default Microsoft drivers are OK but she really wants to disable the tap to click and adjust some of the other settings that aren't available without real touchpad drivers.

hi Ngravelyn,
Welcome to Lenovo Community Forums!
Please try this auto detect, Check if this one works
TouchPad Driver (Synaptics, Cypress)
0wto11ww.exe
142MB
Please make sure to uninstall any Installed driver for the touchpad first before installing this.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

2 GB Memory upgrade for HP Mini 110-3025tu

I recently bought this laptop HP MINI 110-3025tu
Specs
-atom n475
-1gb DDR2
My problem/our problem is this.
When i installed a new 2GB DDR RAM into MINI 110 and turn it on, it show black screen and no LED blink, just power button light on
then i remove the new RAM and install the original one into MINI 110 and turn it on again, it still got black screen
Please tell me if i can do something to fix this problem
Much thanks!
Joe

Yes, the issue is with Memory Controller on N455/N475 processor. It is having issue with working, with any and every DDR3 memory module...Here is on going thread, where couple of memory module are listed, that reportly is working...
http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/317562#M32...
http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/318498#M32...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

What is the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw)?

I need to find the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw).
This question was solved.
View Solution.

Good question.
That I don't have a definite 100% answer to.
It probably is OK. Wattage is what it is rated at. More wattage is probably a good thing, and I have read that = or - .5v is not supposed to be an issue.
You can do a google search of the part number for your power adapter and see if they still carry it, if you are concerned.
Paul

HP Mini 110 bios is asking for a password after MoBo battery got unplugged !!??

I just got the "suprise-we-gave-you-bios-password" error after I was trying to fix a hard drive & keyboard for a HP Mini 110 1116ca. The on-board battery got unpluged and now it asks for a bios password.. grrrr!
Why does HP do this!!?? re-seating a mobo battery & jumper is suppose to reset bios passwords not give you one.
Much thanks if you can help!
error:
CNU9425WSM
This question was solved.
View Solution.

Hi,
Try entering: e9lofxu0hp ( Note that the 3rd character is a lower case L and the 8th is Zero )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP mini 110-1006TU Sata driver for XP

I have my hp mini 110-1006TU laptop which i am going to reinstall windows xp home edition. When installing windows it shows no hard drive. I search on web I found slipstream only solution. For that i need sata driver for HP Mini 110-1006TU. Or any other solution. please help me.

You need the ich7 sata driver found here:
SATA driver
This can make a floppy or extract to another location on your hard drive to use with nLite to create the XP install disk.

Need hard drive model/type for hp mini 110

Hi,
I took my hp mini 110-3518cl to IT today and they told me my hard drive was failing and needs to be replaced. What kind of hard drive do I need to buy? I already tried going to system diagnostics but was unable to find hard drive information.
Product: XZ134UA#ABA
Thanks in advance for any help!
This question was solved.
View Solution.

Hi
Please find the link given might help to get the right information. check page 44 Chapter 4 Removal and replacement procedures.
HP Mini 110-3518cl PC Product Specifications
Maintenance and Service Guide
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Correct display settings for hp mini 110

can someone please tell me what the correct display settings are for the hp mini 110? thank you!

@ebernier ,
Hello and thank you for posting on the HP support forums. Please check out the following link it will help you when posting so that we can help you better.
Advice for asking the "Very Best Question"
As for correct display setting. What ever setting you find most comfortable is the best.
Please post back if you have any more questions. As well include your full model and product number.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Can someone please post the password for the following HP Mini 110

Customer brought in laptop and did remember the bios password.
We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode. Can someone please post the password for the following HP Mini 110.
Halt code = CNU937BF2X
thanks Andy Mountain Computers Inc.

Hi,
Try:
e9lofxp874
e9lofxp87r

Touchpad drivers installation for Mini 110

Similar Messages

Maybe you are looking for