Touchpad drivers not installing for U310 Touch on Windows 7

My wife got a U310 Touch today which is a nice little computer. However it came with Windows 8 and she prefers Windows 7, so I took care of clearing the hard drive and installing Windows 7. We installed all the Windows 7 drivers from the Lenovo support site however the touchpad drivers fail to install. I tried manually installing the Synaptec drivers but it told me I don't have a Synaptec device. I then installed the Cypress drivers manually and rebooted but then the trackpad doesn't work at all.
I looked in Device Manager and the Hardware ID for the PS/2 Compatible Mouse says SYN2B0B which appears by all internet research to be a Synaptics hardware ID, which would make it understandable that the Cypress driver didn't work but really irritating that the Synaptics installer won't run because it says I don't have a Synaptics device.
What should I do? The default Microsoft drivers are OK but she really wants to disable the tap to click and adjust some of the other settings that aren't available without real touchpad drivers.

hi Ngravelyn,
Welcome to Lenovo Community Forums!
Please try this auto detect, Check if this one works
TouchPad Driver (Synaptics, Cypress)
0wto11ww.exe
142MB
Please make sure to uninstall any Installed driver for the touchpad first before installing this.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

ISE Webpack, Cable Drivers not installing for Debian Wheezy

Trying to install ISE Webpack with cable drivers yield the following error during installation:
Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
Since drivers are not installed, attempting to launch iMPACT later on gives:
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT:923 - Can not find cable, check cable setup !
The entire install.log can be found here:
--Install log = /tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log
--Installing cable drivers.
--Driver versions in this package: windrvr=1301, xpc4drvr=1041
--Script name = /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers
--HostName = invidia
--Current working dir = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
--Script location = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
--Script argument=/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE.
Digilent Cable Drivers Installer
Checking for prerequisite: libusb-1.0
libusb-1.0.so.0 is present
Installing component: Digilent Adept Runtime
Adept Runtime Installer
64-bit operating system detected
Installing runtime libraries.....
Checking to see if libdabs.so is already installed....
Existing installation of libdabs.so found. Checking to see if this version should be installed.
Version 2.11.1 is currently installed. Version libdabs.so.2.11.1 will not be installed.
Checking to see if libdaci.so is already installed....
Existing installation of libdaci.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdaci.so.2.7.2 will not be installed.
Checking to see if libdaio.so is already installed....
Existing installation of libdaio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdaio.so.2.7.2 will not be installed.
Checking to see if libdemc.so is already installed....
Existing installation of libdemc.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdemc.so.2.7.2 will not be installed.
Checking to see if libdepp.so is already installed....
Existing installation of libdepp.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdepp.so.2.7.2 will not be installed.
Checking to see if libdftd2xx.so is already installed....
Existing installation of libdftd2xx.so found. Checking to see if this version should be installed.
Version 1.0.1 is currently installed. Version libdftd2xx.so.1.0.1 will not be installed.
Checking to see if libdgio.so is already installed....
Existing installation of libdgio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdgio.so.2.7.2 will not be installed.
Checking to see if libdjtg.so is already installed....
Existing installation of libdjtg.so found. Checking to see if this version should be installed.
Version 2.10.1 is currently installed. Version libdjtg.so.2.10.1 will not be installed.
Checking to see if libdmgr.so is already installed....
Existing installation of libdmgr.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdmgr.so.2.7.2 will not be installed.
Checking to see if libdmgt.so is already installed....
Existing installation of libdmgt.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdmgt.so.2.7.2 will not be installed.
Checking to see if libdpcomm.so is already installed....
Existing installation of libdpcomm.so found. Checking to see if this version should be installed.
Version 2.10.1 is currently installed. Version libdpcomm.so.2.10.1 will not be installed.
Checking to see if libdpcutil.so is already installed....
Existing installation of libdpcutil.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdpcutil.so.2.7.2 will not be installed.
Checking to see if libdpio.so is already installed....
Existing installation of libdpio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdpio.so.2.7.2 will not be installed.
Checking to see if libdpti.so is already installed....
Existing installation of libdpti.so found. Checking to see if this version should be installed.
Version 2.8.2 is currently installed. Version libdpti.so.2.8.2 will not be installed.
Checking to see if libdspi.so is already installed....
Existing installation of libdspi.so found. Checking to see if this version should be installed.
Version 2.8.2 is currently installed. Version libdspi.so.2.8.2 will not be installed.
Checking to see if libdstm.so is already installed....
Existing installation of libdstm.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdstm.so.2.7.2 will not be installed.
Checking to see if libdtwi.so is already installed....
Existing installation of libdtwi.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdtwi.so.2.7.2 will not be installed.
Checking to see if libjtsc.so is already installed....
Existing installation of libjtsc.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libjtsc.so.2.7.2 will not be installed.
Successfully installed runtime libraries.
Installing system binaries.....
installed "/usr/local/sbin/dftdrvdtch"
Successfully installed system binaries in "/usr/local/sbin".
Installing firmware images.....
Successfully installed firmware images in "/usr/local/share/digilent/data/firmware".
Installing JTSC device list.....
Successfully installed JTSC device list "/usr/local/share/digilent/data/jtscdvclist.txt".
Installing CoolRunner support files.....
Successfully installed CoolRunner support files in "/usr/local/share/digilent/data/xpla3".
Installing CoolRunner 2 support files.....
Successfully installed CoolRunner 2 support files in "/usr/local/share/digilent/data/xbr".
Installing Adept Runtime configuration.....
Successfully installed Adept Runtime configuration "/etc/digilent-adept.conf".
Installing USB UDEV rules.....
Successfully installed USB UDEV rules "/etc/udev/rules.d/52-digilent-usb.rules".
Successfully reloaded UDEV rules.
Successfully updated dynamic loader cache.
Successfully installed Adept Runtime.
Successfully installed component: Digilent Adept Runtime
Installing component: FTDI Drivers (libftd2xx)
FTDI Driver Installer
64-bit operating system detected
Checking to see if libftd2xx.so is already installed....
Existing installation of libftd2xx.so found. Checking to see if this version should be installed.
Version 1.0.4 is currently installed. Version libftd2xx.so.1.0.4 will not be installed.
Successfully updated dynamic loader cache
Successfully installed FTDI Driver
Successfully installed component: FTDI Drivers (libftd2xx)
Installing component: libCseDigilent
Installer for Plugins for Xilinx Tools
Plugins will be installed in the following directory: "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
Found plugin "libCseDigilent" version "14.1" by "Digilent".
Successfully installed plugin in "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/lib/lin64/plugins/Digilent/libCseDigilent".
Successfully installed 1 plugin(s) for Xilinx Tools.
Successfully installed component: libCseDigilent
Successfully installed Digilent Cable Drivers
--Kernel version = 3.2.0-4-amd64.
--Arch = x86_64.
--Installer version = 1100
--Unsetting ARCH environment variable.
--File /lib/modules/misc/install_windrvr6 does not exist.
--Installing USB drivers------------------------------------------
--File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex version = 1030
--File xusbdfwu.hex exists.
--File xusbdfwu.hex version = 1030
--File xusbdfwu.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex version = 1028
--File xusb_xlp.hex exists.
--File xusb_xlp.hex version = 1028
--File xusb_xlp.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex version = 1028
--File xusb_emb.hex exists.
--File xusb_emb.hex version = 1028
--File xusb_emb.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex version = 2004
--File xusb_xpr.hex exists.
--File xusb_xpr.hex version = 2004
--File xusb_xpr.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex version = 1030
--File xusb_xup.hex exists.
--File xusb_xup.hex version = 1030
--File xusb_xup.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex version = 2300
--File xusb_xp2.hex exists.
--File xusb_xp2.hex version = 2300
--File xusb_xp2.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex version = 2006
--File xusb_xse.hex exists.
--File xusb_xse.hex version = 2006
--File xusb_xse.hex is already updated.
--Product ID 0007 is already in the usermap.
--Product ID 0009 is already in the usermap.
--Product ID 000d is already in the usermap.
--Product ID 000f is already in the usermap.
--Product ID 0013 is already in the usermap.
--Product ID 0015 is already in the usermap.
--Product ID 0008 is already in the usermap.
--Installing windrvr6---------------------------------------------
--Checking version.
--File /lib/modules/3.2.0-4-amd64/kernel/drivers/misc/windrvr6.ko does not exist.
--File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko does not exist.
--Setting source version to 1301.
--File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko is newer than the destination file.
USE_KBUILD = no
checking for cpu architecture... x86_64
checking for WinDriver root directory... /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64
checking for linux kernel source... found at /lib/modules/3.2.0-4-amd64/build
checking for lib directory... ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT)_32.so /usr/lib/$(SHARED_OBJECT).so; ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT).so /usr/lib64/$(SHARED_OBJECT).so
checking which directories to include... -I/lib/modules/3.2.0-4-amd64/source/include
checking linux kernel version... not found
make -f makefile.wd clean
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make -f makefile.wd
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make -f makefile.wd
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
--make windrvr install rc= 2
--install_windrvr6 rc = 2
--Module windrvr6 is not running.
--Module xpc4drvr is not running.
--Note: By default, the file permission of /dev/windrvr6 is enabled for the root user only
and must be changed to allow access to other users.
--real rc=2
--Driver installation failed.
--Digilent Return code = 0
--Xilinx Return code = 1
--Return code = 1
INFO ::Mon Dec 02 10:59:01 TZ 2013:: Console message preference has been changed to INFO
INFO ::Mon Dec 02 10:59:01 TZ 2013:: Xilinx Installer/Updater launched.
INFO ::Mon Dec 02 10:59:05 TZ 2013:: Proxy choice: IE
INFO ::Mon Dec 02 10:59:05 TZ 2013:: install version: 14.7
INFO ::Mon Dec 02 10:59:05 TZ 2013:: dat file URL: www.xilinx.com/direct/swhelp/14_wiclient.dat
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: /tmp/xilinx_ise_webpack/14.7/ISE_DS
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Acquire or Manage a License Key
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Edition : ISE WebPACK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE DS Common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: ISE DS Common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: PlanAhead Analysis Tool
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: PlanAhead
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: PlanAhead Files
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: setupEnv.sh
INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: ISE
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: Design Environment Tools
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: WebPACK Devices
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Linux System Generator Info XML
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Ensure Linux System Generator Symlinks
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Enable WebTalk to send software, IP and device usage statistics to Xilinx (Always enabled for WebPACK license)
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Cable Drivers
INFO ::Mon Dec 02 11:08:59 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:08:59 TZ 2013:: Migrating registry and creating file association
WARN ::Mon Dec 02 11:08:59 TZ 2013:: Unable to copy "/home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1/common/idata/.pref.bin" to "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/.xinstall/idata/.pref.bin" source does not exist.
INFO ::Mon Dec 02 11:09:00 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:11:41 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:11:41 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:11:42 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:13:23 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:13:23 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:13:24 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:19:00 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:19:00 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:19:01 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: setupEnv.sh
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: Install Linux System Generator Info XML
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen/util/ensure_symlinks.sh /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen lin64
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/PlanAhead/data/webtalk/webtalk_install.sh on
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /bin/sh -c "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers >>/tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
INFO ::Mon Dec 02 11:19:14 TZ 2013:: Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
INFO ::Mon Dec 02 11:19:36 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/xlcm
INFO ::Mon Dec 02 11:20:14 TZ 2013:: Xilinx Installer/Updater exited with return status "0".
INFO ::Mon Dec 02 11:20:14 TZ 2013:: ################################################################
What are the steps required to fix the drivers on Debian Wheezy?
Thanks in advance
Andreas Frisch

I'm a bit surprised that the only supported Linux distros are commercial (costing money) distros!
What's the point in providing Linux support for your tools then. The overwhelming majority of Linux users use free distros like Mint, Ubuntu, Debian, Fedora etc.
I had exactly the same problem and now I'm forced to BUY a Linux distro in order to build PetaLinux?
Anyway, a) are there any plans to support these tools on the more popular (free) distros? and b) Does anyone know if we can use CentOS 6, since that's supposed to be a community (free) clone of the supported (but not free) RHEL 6 distro?
Anyone know of an 'unsuported' Linux distro that 'works' anyway (especially for the cable drivers)?
It LOOKS as if that one cable driver install issue is the only thing preventing us from using a boat load of other distros. Can't this be fixed?

X201 Tablet: Drivers not working for Network controller on Windows 7 Pro x64

Hello,
After downloading and installing all LAN and WLAN drivers for X201 Tablet, I couldn't find one that works on Windows 7 x64.
How can I proceed?
Thank you in advance
Solved!
Go to Solution.

I fixed it by downloading this drivers:
https://downloadcenter.intel.com/download/18713/Network-Adapter-Driver-for-Windows-7-
And after installing them and restarting, searching for them manually from the Device Manager.
Cheers

Zen V Plus Not Connected. Saying No drivers are installed for this devi

Hi,?Recently purchased a zen v+ and thought i'd gotten a good mp3 player.got home, charged the player. installed software and got excited to start putting songs on and listening to?it. plugged it in the usb slot and BAM!?"USB device not recognized" so i went into control panel/system/hardware/devicemanager then clicked on uni'versal serial bus controllers and noticed a "unknown device". so i right clicked it and went properties and its saying No drivers are installed for this device. so i went to the driver tab and clicked on driver details and a window popped up saying no drivers are required or are loaded for this device.. then i came to the support page and had a look at some posts and came across http://us.creative.com/support/kb/article.asp?l=2&sid=9287?i read and followed the instructions word for word and still didnt help. went to the creative support downloads page and thought maybe i could download and re-install the drivers for my zen v+ but they had no downloads that related to drivers. Before contacting creative i thought i would come on here and find out if anyone can help.is there a site? or can someone give me a site so i can download the latest drivers for my zen v, i've tried installing them off the cd and it says no new devices found. any help would be greatfully appreciated..thanks for your timebrett?

Hi,
I had a similar problem, try this site
http://blogs.microsoft.nl/tonykrijnen/archi've/2004/2/28/59.aspx
For the English people among us:
Choose Start
Choose Run
Type REGEDIT en geef ENTER
Open:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
With right mouse ENUM and choose Permissions.
Check if there is a group EVERYONE with a 'v' on READ
The same for USB (under ENUM). If the group everybody is not there, create one.
Angele

ITUNES 10.6 is not installing for windows 7

ITUNES 10.6 is not installing for windows 7;

Thasnk y.ou I just got my laptop and didnt get why the itunes icon wasnt popping up on my pc and i was getting no further qustions like i did when i installed it on my work computer. Well thanks again Up The Iron's Iron Maiden Rules

I uninstalled Firefox and not it will not install for me. I get a error that says, The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions. What can I do?

I uninstalled Firefox and not it will not install for me. I get a error that says, The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions. What can I do?

Here is a pic.

PC suite - Cable drivers not installed???

After installing the PC suite VER 6.82.22.0, though PC recognizes N70 phone, the PC suite does not get connected. When clicked 'About PC suite' and 'system info', message cable drivers not installed is found. However, if checked in the control panel, the drivers are found installed. The earlier version did not have any problems. Can any body solve this.

try this:
/discussions/board/message?board.id=pcsuite&message.id=11480

'ROracle' is not installed for 'arch = i386'

Successfully downloaded ROracle_1.1-11.zip and installed as local zip file.
But got below error when loading:
> library(ROracle)
Error: package ‘ROracle’ is not installed for 'arch = i386'
Any idea what might be wrong?
With Windows 7, 32-bit, Intel Core i5.

The ROracle for Windows package on OTN, ROracle_1.1-11.zip, is for Windows 64-bit. For 32-bit systems, you'll need to rebuild the package from source.
Refer to the ROracle INSTALL file for information on compiling ROracle for Windows 32-bit. Keep in mind that Oracle R Enterprise is supported on 64-bit systems,
so if you plan on using ORE you'll need to install on a 64-bit machine.
Sherry

HP 5610xi "drivers not installed"

Setup and printed from a HP 5610xi on a iBook G4 (10.3.9) using USB. Then tried to setup through Airport Express (USB printing enabled)-Rendezvous 'sees' the printer but "drivers not installed' message stops the process? 'Latest' HP drivers are installed

HP 'answered' my question - the 5610 AIO is not compatible with the Airport Express! Compatible list is at: http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00035369

Computer says itunes drivers not installed?

computer doesnt recognize ipods. tried to update itunes and it shut my computer down and blew out all my ports. had computer repaired, seems that update worked but cant plug in ipods to sync music and the box comes up saying the itunes drivers not installed. how do i install them? im a little hesitant to download itunes again after what happened last time, so just wanted some advice.

No, you will not lose your library. The actual installation and where your files are stored are in separate locations. When you uninstall, you are only uninstalling the program, and therefore, your library will not be affected.
Only thing to note is if you changed the location of your itunes library, you will have to tell itunes where you keep your library, so itunes can load it from there.

Itunes does not recognize my iPod Touch using Windows 7 - 64bit

Itunes does not recognize my iPod Touch using Windows 7 - 64bit. Is this a driver issue? Has anyone else had this problem? Is there a fix?
Message was edited by: Mark DiGiacomo

hi sally,
see if this user tip by Yorkwill helps:
+In the end what works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:+
+1. First off you need to have iTunes installed and the ipod touch plugged in+
+and recognized as ‘something’ e.g. digital camera (it shouldn’t really+
+matter what it’s recognized as, but it needs to be found by windows).+
+2. Search for usbaapl in the C:\WINDOWS system folder:+
+o open windows explorer (e.g. Right-click Start and then click ‘explore’)+
+o right-click the WINDOWS folder and select ‘Search’).+
+o type in usbaapl and hit Search – try to ignore the dog!+
+You should find the driver info in a sub folder of+
+C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B+
+Remember that location (either leave the search box open or copy the folder+
+name into note pad – you’ll need it later)+
+If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not+
+been installed with the iTunes install and you’ll have to reinstall iTunes.+
+3. Locate the ipod-camera device:+
+o Open the device manager, e.g. using Start > Control Panel >+
+Performance and Maintenance > System > Hardware Tab > Device Manager+
+o Look for a device called ‘ipod’ - if your ipod shows up as+
+‘digital camera’ it will be under something like ‘imaging devices’.+
+4. Update the driver:+
+o Right click the ‘ipod-camera’ in device manager and click on+
+‘Update Driver’ – the Hardware Update Wizard will open.+
+o Check the ‘Install from a list or specific location’ then click ‘Next’+
+o Check ‘Search for the best driver in these locations’. Un-check+
+‘Search removable media’ and check ‘Include this location in the search’.+
+In the text box below type (or better copy and paste) the folder+
+containing the ipod driver information found in step 1 (in the example+
+above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B), +
+then click Next.+
+You should now see something like ‘Apple ipod device driver’ or so. Continue+
+installing that device. Once the driver has been installed the ipod will come+
+to life and iTunes (if you have it open) will show it.+

My USB hub driver is not installing on my macbook pro windows 7 partition ?

hey there, my USB hub driver is not installing on my macbook pro windows 7 partition .. any clue?

yes am talking about windows 7 on my mac pro ... i did the following troubleshooting steps but no use and still the device is not recognized.
       - i changed the usb port .
       - i changed the hub it self .
     - i seaarched online for the driver automatically
        - i searched online for the driver manually ie. hardware id ..
         - i checked the connections,,
anything else should i do ??

When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

Itunes helper was not installed correctly. Error 7 (windows error 14001) ?

Upgraded to ITUNES 10 and received following error - Itunes helper was not installed correctly. Error 7 (windows error 14001) - have tried uninstalling all APPLE products, restarting etc and installing ITUNES and QUICKTIME separately yaddah yaddah - NO SUCCESS. Losing patience ?

have tried uninstalling all APPLE products,
Doublechecking. Were you using the instructions from the following documents?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(Doublechecking, because an error 7 off ituneshelper normally indicates trouble with Apple Application Support. If something else is going on, it's pretty exotic.)

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

Touchpad drivers not installing for U310 Touch on Windows 7

Similar Messages

Maybe you are looking for