Touchpad enable/disable key and Airplane mode key not working after Win10 upgrade

My fat thumbs roll across the touchpad and take me to some strange places while typing . Since I upgraded to Win10, my disable button (F5) is not functional. Also my Airplane mode button (F12) is not functional. Anyone know a fix? E45T-A4100 p/n PSK82U-00X00L

Your welcome, KCSkyhawk.

Similar Messages

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No!

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
Make sure all your data is available on your computer for manual syncing later.
Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
And you are using iTunes 10.7?
I'm just trying to help get you going.

Mute button, low volume button and high volume button not working after upgrade to Win7 Pro

Hi all, Im using X301. Previously it was shipped with the Vista Business. I was entitled for free upgrade to Win7 since the thinkpad was bought after 25th of June 09. The problem started after I successfully upgraded my Vista to Win7 Pro. My Mute/Unmute button was consistently in amber colour (signal for disabled). the volume button also is not working anymore. On the system side, everything was fine. the drivers is working properly.. the windows also is showing the volume is in a good shape. Unfortunately the button on the thinkpad is always on the disabled mode. Ive been searching for a related drivers that i could download and solve the issue. but till now all the softwares and drivers downloaded from lenovo could not solve my problem. any suggestion or comment is highly appreciated. thanks a million

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update.

IPad 2 front and back camera is not work after update iOS 7.0.4 it gives like the resolution is not adjusted

After updating my ipad 2 to iOS 7.0.4 , front and back camera is not working it gives like very small dots or dash. I did restore from iTunes and reset by holding on the home and sleep button, I also tried to close the app from the task bar but still all trials didn't solve the problem.

I haven't heard of this before so I doubt it's a bug. Probably something happened during the 7.04 download.
Backup your iPhone to iTunes and restore it as a new iphone, then restore from the backup. This will give you a fresh copy of iOS 7.04.

Touchpad mysteriously enables itself, after I disable it and number pad does not work

I just purchased a HP 15 Touchsmart Notebook. I upgraded it to Windows 10 upon initially setting up this Notebook.I have 2 problems: 1. After disabling the touchpad, it mysteriously enables itself.2. The number pad on the keyboard does not work at all, even when pressing the num lock. I've researched the Internet and have come up with nothing. Please help Thank you

Ok.. I found how
First I turned off the wireless in both computers, then I turned off the firewall in the PC
after I plugged the Ethernet cable in both computers
I found the IP address of the PC in; start run CMD at the promt I wrote IPconfig enter
In the MAC I went to go connect to a server
I wrote the IP address in the server
In the user I wrote the admin user of the PC with its password
Yahooo!... conected and I copy the 200 gigs in 2,5 hours
Med_

Help! My keys and touch screen are not working

Does anyone know what's wrong with my phone. The keys have stopped working and also my my touchscreen is not working. Yesterday I done a reset and I was able to do a text message but five minutes later the keys stopped working again.
Help please as I can't do anything on my phone now
thanks

Device info
Your carrier:
Blackberry 9800 v6.0.0.246,
Apps and free space
Total space 3.5g free space 3.0

Elements 12 on Windows 7 Pro 64 Bit - Quick and Guided Modes do not work?

I have tried to upload the software many times with no help. I also have Elements 11 on the same computer and it works very well. I do not understand why 12 will not work. Since I first installed 12 I have been using it in the Expert mode which seems to work. I have triled all of the suggestions found with no help.

Hi,
Please try the below steps:
Right click on the PSE icon.
Select the option Run as admin.
open the editor .
Check is it working fine now.
Also, try to reset the preferences of editor, refer the below link to do so.
http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actions.html#restore_defa ult_preferences

How do I get the on/off sliding toggles to work in settings and apps? They stopped working after I upgraded to iO6.

After updating to iO6 on my iPhone 4S, the sliding on/off toggles do not work. For example, I can't get the phone out of Airplane Mode. Or, I can't change settings in apps. The slider will not work at all. This is true in both settings and in apps.

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Touch Pad and Web Cam are not working after installing drivers also

Hiii
Synaptic Touch pad drivers are not working like not detecting the hardware so please help me on this
and
Webcam is not working like its not detecting even after installing cyberlink software given in the hp web site
please help me regarding this problems

1.Download hp support assistant.
2.Run it and go to the tab updates and tune-ups.
3.Click in the button check for updates. It will find you the updates.
4.Click in the button Download and Install.
5.When it finish restart your computer.
[link:http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl...
Also if it doesnt' work , you can also try :
1.Right click to the computer.
2.Click to the manage option.
3.Then select the device manager.
4.After that go to imagine devices and select your camera, then right click on it and select the option update the driver software do the same in the touchpad.
If and this doesn' t work unistall the drivers and install them again.

Phone and Contacts APP not working after the upgrade 4.01 from 4.0

Dear all
after the upgrade to 4.01 my iphone stop to operate the phone and the contacts app
when i open phone or contacts the app close(crash) after 1 sec.
When i connect to the mac i have the following message from itunes:
"iTunes could not sync to the iPhone"Christos" because contacts are being synced over-the-air."
Trying to open and change the settings at: mail, contacts, calendar but also crash
Please help
Thanks for your support

This happened to me after I upgraded to 4.0. While the iPhone update offers some great new features it has really done a number on some very basic functions and overall operation.
I am no longer able to use the contacts app to place calls. I can pull up my contact list but when I select an individual contact, the phone seems to freeze for a second and then crashes. (It might be worth mentioning that I use Exchange to sync my contacts.) While the contacts are all on the phone, I can't access actual contact information for each individual.
I'm also experiencing random freezes, touchscreen delays, etc.
I can deal with some minor bugs but not being able to use your contacts to place calls is a huge problem.

Shuffle play no longer works properly and the artwork does not match after iOS5 upgrade.

When I use shuffle play, my ipod touch stops playing after one or two songs and the artwork does not match the song.

i have what sounds like the exact problem; thought it might be related to a) my recent replacement phone, or b) my recent upgrade to OS 5.0.1

Printers and Scanners preference pane does not work after Mavericks upgrade

I upgraded to Mavericks on my late 2011 MacBook Pro, and my printers and scanners preference pane stopped working. Sometimes it comes back as an error and wont open, other times it opens but the list of printers is obscured and not really showing, and it does not react normally. I tried reinstalling from System Restore with the onlie version, but that just took 6 hours but did not really help. I am going a little crazy as I cant get my Canon MX330 scanner installed and recognized. Does anyone have any ideas for me please??

I'm assuming that you're referring to the Printers & Scanners in System Preferences (not a preference pane, which is a different animal).
While I haven't experienced your issue, one thing that users find helpful is to go to System Preferences/Printers & Scanners/, and delete the printers listed by tapping on - (minus). Then, reenter the information when it's required later.

Touchpad enable/disable key and Airplane mode key not working after Win10 upgrade

Similar Messages

Maybe you are looking for