Touchpad goes back to default settings on reboot

I am using Synaptics touch pad (v 19.0.12.95).Everything was smooth as long as i was running windows 8.1. However, after windows 10 upgrade, synaptic settings change to default values everytime on reboot. Everytime I need to unclear the "enable reverse scrolling direction" and the box returns as checked upon reboot..

I found the same issue. Appears to be an issue with Version 19 of the Synaptics driver which loads with Windows 10. Fixed the issue by installing Version 18 of the Synaptics driver that was applied to Win 8.1. The problem will re-appear because windows 10 will automatically re-load Version 19 via windows update. so to stop that happening you may have to disable driver updates in win 10. Maybe this has been reported to Microsft and Synaptics ??? and the issue will be corrected in a future driver release. Clearly it was all OK in win 8.1

Similar Messages

InDesign always goes back to Default settings

I cannot seem to get my settings to stay. If I have to force quit for any reason, the default settings always come back its is so frustrating. I also always have to open the tabs bar even though I check the tabs in the menu, every time I reopen the document, the tabs bar is gone....is this the norm? I am using Tiger, 10.4.11 on a G5 Powermac.
Thanks!

>The next time I am forced to force quit,
you must make your settings then quite not force quit. When you quit ID thats when the app writes the new settings as default when you force quit ID does not have the chance to save these settings. you must follow the prceedure in post 2.
If you can only force Quite ID there is something wrong with your computer.
first thing I would do is Archive and Install the OS.

MacBook Pro screen saver keeps going back to default settings

I use the Vintage Prints screen saver and always change the folder of photos to the most recent folder of photos I have taken. (I am an avid photographer and take lots of pictures.) Periodically the screensaver reverts back to the default settings: National Geographic photos, not shuffling the slide order. This has happened multiple times. Why won't it keep my settings?

Well try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
Open the setup page of router using 192.168.1.1 then put in the password as admin...all you need to do is do the wireless settings such as Radio Band Frequency to Standard 20 MHZ frequency,channel to 11.
Also,the advanced wireless settings to Beacon Interval=50,Frag
thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet
Requests & it will definately work!!!

Adobe Reader V11 not going back to default settings after print

Hi Guys, First time on this forum. Im having a problem with one of our clients Adobe Reader software, They have the latest version installed
When printing they select the options they want i.e "multiple" (Only happens when you change something in here)
Then even if they close down adobe (have made sure the task isnt running in task manager) start it and go to print another PDF it opens to this page automatically and you are required to set them back manually
Any help would be much appreciated
Thanks
Mike

Well try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
Open the setup page of router using 192.168.1.1 then put in the password as admin...all you need to do is do the wireless settings such as Radio Band Frequency to Standard 20 MHZ frequency,channel to 11.
Also,the advanced wireless settings to Beacon Interval=50,Frag
thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet
Requests & it will definately work!!!

When closing browser looses all my settings and goes back to default on reopening

I set what I want in options like do not remember history and font size and do not show download window when installed. every time I shut it down and restart it later everything goes back to default.

It sounds like a problem with the preferences file, for details on fixing it see the [[Preferences are not saved]] article.

Firefox should allow users to maintain their zoom setting when switching to a different page, instead of going back to default every time.

Page text appears very small on laptop while utilizing full resolution on a dell XPS laptop. Zoomed-in a notch or two it looks good. Readable without squinting. But browse to a different page, and its tiny all over again. Firefox, being the best browser on the web, should think about allowing users to maintain their zoom value when going to a different page, instead of going back to default. Just an idea... I know there's alot of laptops out there and if it's hard for me to read with good eyes, I'm sure it's hard for others.

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

Printer Queue Settings Mysteriously Reverting Back to Default Settings on 2008 R2 print servers

Printer Queue Settings Mysteriously Reverting Back to Default Settings on 2008 R2 print servers
We have 4 Windows Server 2008 R2 print servers, all of which has the same printer queues installed on them that are utilized by a 3rd party printing program that does a round-robin load balancing scheme.
All printers are a combination of HP and Xerox all running some variation of the HP UPD and the Xerox UPD. Some use the PCL 5 and some use the PCL 6 version determined by age of printer and need.
There are typically two printer queues for each physical printer.
Example:
LOCATION_ROOM
LOCATION_ROOM_TRAY2
The regular queue is ok being left with default setting,
The _TRAY2 queues are set to print to "labels" or "pre-printed" paper type or a specific tray.
From time to time, these _TRAY2 queues will revert back to a factory default state and lose the setting to print to a specific paper type or tray. Sometimes it happens to the _TRAY2 queue on all 4 servers, sometimes just 1 server, etc. No rhyme
or reason.
Disabled Bi-directional options on both the HP and Xerox UPDs per another article on the internet that said bi-directional could cause the printer to send back settings to the driver and cause this issue. Even with this option off, we continue to see
printer _TRAY2 queue settings revert back to factory default and lose their specific paper and tray settings. We have ruled out the possibility that users or other technicians are the ones making these changes so we suspect it is some interaction between
the servers, printer drivers and printers themselves causing the issue.
Any insight would be greatly appreciated.

I'd start by using one of the print drivers included in Windows for a few of the printers and confirm it's the universal driver that is causing the issue.
HP installs some other processes and services on the machine which communicate with the HP devices.
PML and something else. You might want to shut those down and see if these processes are the ones modifying the settings.
Run process monitor to truly identify which processes is causing the modifications.
Alan Morris formerly with Windows Printing Team

HT201412 I am trying to personal hotspot but each time I go into it and tune it on the screen goes back to the Settings page and personal hotspot has disappeared and can not be found. I have tried restarting the phone and also a factory restore to no avai

I am trying to personal hotspot but each time I go into it and tune it on the screen goes back to the Settings page and personal hotspot has disappeared and can not be found. I have tried restarting the phone and also a factory restore to no avail. HELP

I had a similar issue and it was password case sensitive issue

My macbook pro is slow / freezing even after going back to factory settings

my mac book pro is slow even after going back to factory settings.....
What do i do next its driving me insane!
its 2010 macbook pro running mountain lion
- cpu is peaking with just a single web page open
- laptop is pretty hot
- cant watch any films or online videos
- cursor is lagging on screen
- disc usage is 5% / 95% free!
- system memory = half free, so 2gb out of full 4gb i have
If anyone has any ideas of whats possibly wrong please let me know ur thoughts
Am beginging to think its possibly damage to my harddrive now

Start with a SMC reset:
http://support.apple.com/kb/ht3964
Run an Apple hardware test.
http://support.apple.com/kb/ht1509
You may have to use OPTION D to start it.
Take a look at Activity Monitor, set to 'All Processes' for possible clues.
Look at these two user tips:
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao.

Album info DATED BUT goes back to default

Dear Sony amd Sony Users,
I have been updating my Walkman album information for a couple of times already and my patience is thinning out. Yes, I do use the Download Music Info and it is great for some selected songs. But those songs that are saved through Bluetooth needs to be updated individually. It worked fine for a period of time but recently those Songs received through bluetooth are going back to default. The album cover, album title and album artists are gone. I have to update it individually again. I have been doing it for a couple of times already alread.
How can I save those album information PERMANENTLY? Please help. Thank you
On the verge of losing it,
Sirius.

The way I do it is to transfer those files to a Pc and use a free program called mp3tag and change the embedded info then transfer them back
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

CS5 resorts back to default settings each time it is opened. None of my preferances save. Why not?

CS5 resorts back to default settings each time it is opened. None of my preferances save. Why not?

Then your preferences are not being saved.
Assuming you actually quit Photoshop (instead of shutting down the machine) - your preferences should be saved whenever you exit Photoshop.
Most likely your preferences folder has the wrong permissions and the preferences are not being written on exit. What OS version are you using?

How do I get back to default settings for photoshop elements edit

How do I get back to default settings of photoshop elements 9 for edit. I tried to edit one picture and now all of my pictures are discolored.

Quit the editor, then restart it while holding down ctrl+alt+shift (cmd+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

Why do my ringtones keep going back to default i have an iphone 5s and it's really annoying me now

Why do my ringtones keek going back to default they work for a day then go if this is really annoying me so any help would be welcome if anybody else us having this problem

Same problem here, and it's p*****g me OFF!

Hi, I recently received an email which I believed to be from my bank but it turns out it was from someone trying to hack my bank account. I accessed the email on my phone and I wanted to know if I need to restore my iphone back to default settings?

Hi, I recently received an email which I believed to be from my bank but it turns out it was from someone trying to hack my bank account. I accessed the email on my phone and I wanted to know if I need to restore my iphone back to default settings? I am a bit worried about losing everything on my phone if I do this but at the same time I don't want them to get any other information. Any ideas?

Did you log in with your bank account via the link included with this email?
If not, you have nothing to worry about.
Accessing or viewing the email alone can't provide your bank account info or the log in for your bank account.

Synaptics Touchpad Tap Scroll settings changed back to defaults on every reboot. Windows 10

After the Windows 10 upgrade my Synaptics Touchpad setings seem to be reset to factory defaults on every reboot. I go in and change to deselect Tap and Scroll gesture options, save, and everything works as expected. If I reboot my pc... all of my changes are erased. I go to Start >Settings > Mouse and Touchpad > Additional Mouse Options > Device Settings > Settings Right after boot: MultiFinger Gestures (selected) Scrolling (deselected) Tapping (selected) Buttons (selected) After change manually and saved:
MultiFinger Gestures (deselected) Scrolling (deselected) Tapping (deselected) Buttons (selected) Rebooted again... and back to initial defaults (Arg!!!) Can anyone suggest a fix?

Hello! I just wanted to share a solution to this issue. I've been having this issue ever since I started the Windows 10 insider program so it's sad that Microsoft didn't fix it before release. Anyway let's get started! The first thing you will want to do is uninstall the Synaptics Driver. Right click on the start button and click programs and features. Find the Synaptics Pointing Device Driver and uninstall it. You will eventually need to restart your PC but do not do that yet otherwise it will just reinstall itself. Next your going to want to Hide the update from Windows Update. To do this on Windows 10 you need to download a tool which can be found here. https://support.microsoft.com/en-us/kb/3073930 Run the tool it will begin detecting problems and searching for updates. You will get two options, Hide Updates or Show hidden updates. Click on Hide updates and on the list you will see the Synaptics Driver, place a checkmark on it and then click next. Let the wizard finish and you've successfully hidden the Synaptics pointing device driver. Next open settings and click on Update & security, click recovery on your left, and then click restart now under advanced startup. Next click on troubleshoot. Then at the choose an option screen, click advanced options, click on startup settings, and click restart. Once your computer restarts you'll see startup settings. Press the number 7 to disable driver signature enforcement. Your computer will now boot up. Login and open your web browser and go to this link http://www.synaptics.com/en/drivers.php Download the latest synaptic's driver for Windows 8 and install it. Once installed, you maybe prompted to reboot so go ahead and reboot the computer. After that, go into your mouse settings and configure your touchpad to your liking. You will not have to worry about losing your settings after restarting the pc anymore. I suggest keeping the tool that allows you to hide or show hidden updates as it is quite handy.
Summary:
1.) Uninstall the Synaptics Driver
2.) Hide the Driver Update for Synaptics using this tool: https://support.microsoft.com/en-us/kb/3073930
3.) Go to Settings, Update & security, recovery, advanced start [restart now]
4.) Click troubleshoot, advanced options, startup settings [restart now]
5.) Press the number 7 to disable driver signature enforcement
6.) Download the latest synaptic's driver for Windows 8 from the website. http://www.synaptics.com/en/drivers.php
7.) Reboot the computer if necessary.
8.) Configure your mouse settings to your liking.

Touchpad goes back to default settings on reboot

Similar Messages

Maybe you are looking for