Touchpad less reactive after Snow Leopard upgrade?

Since I upgraded this morning to Snow Leopard, I have noticed that the touchpad is often less reactive. I only use touch clicking...never push the touchpad to click. Very often now I'll have to touch to click several times to choose an icon, close an application, or any of the normal touch clicks that I use without any problems before the installation. Anyone else have this problem? Any solutions or just wait for an update>

There are a number of tricks that "work" but the problem always returns within a couple days or usually less.
You can also uncheck all the Trackpad prefs, restart your machine then recheck them. This works for a while. You can zap PRAM. This works for a while. You can reset the SMC which also works for a while.
You can go back to 10.5.8 and this works permanently.

Similar Messages

Isight no longer works after snow leopard upgrade

my isight no longer is available directly after snow leopard upgrade on my macbook black. Anyone else with the same problem? The isight does not show up in 'about this mac' under USB and I tried resetting SMC and PRAM.

Hi,
In Leopard there was an App called iSight Update app that was in Hard Drive/System/Library/Core Services
This does not seem to be there in Snow Leopard.
An issue with some computers with the camera was that in System Preferences > Displays the Colours needed to be set to Millions.
Also check the Hard Drive/System/Library/Extensions folder and see that you have the Apple_iSight.kext (this is likely to handle the Internal iSights as well).
One last thing.
Some Web sites can make use of the camera using Flash.
If that tab is still open the Browser may have use of the camera.
It sounds like you have done computer restarts and this will not be the case unless the browser is set to go back to that page.
7:26 PM Sunday; August 30, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.

Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.
Is there any way to use a 10.5.7 wireless .kext files on Snow Leopard? And where can I find the files?

Ok, I have the fix!! After several frustrating days it finally just works.
The process:
Upgrade your Macs to 10.6 (Snow Leopard)
Powercycle your modem AND time capsule / airport TWICE
Reset your time capsule with a pin or paperclip on the back
Follow the prompts to setup your time capsule / airport access
-- On your Macs
Go to System Preferences > Network > Airport > Advanced > TCP/IP
Click "Renew DHCP Lease" then click "Ok"
Click Apply
Turn off Airport
Turn Airport on
IT WORKS!!!
One of the magical people at tech support walked me through it earlier today. The whole process took about 1.5 hrs because Show Leopard takes about an hour to install on one machine.
Hope this helps-
Joshua

Receiving email after Snow Leopard upgrade

Everything works fine after Snow Leopard upgrade 10.6.2 except I cannot RECEIVE email. I have checked with Comcast and verified my settings for both incoming and outgoing POP mail.

Hello and welcome to the Discussions.
I had no problems of this sort when upgrading to Snow Leopard or 10.6.2. Were you already running Snow Leopard in an earlier version, or did you upgrade from Tiger (10.4.11) directly to SL 10.6.2?
Quit Mail, and in the Finder open Home/Library/Mail. Locate any files named to include MessageUidsAlreadyDownloaded. At the root level of the Mail folder you should find one named MessageUidsAlreadyDownloaded3, but look in each POP account folder also. There if you find any other, including MessageUidsAlreadyDownloaded2 delete them from each POP account folder -- they are not used in versions of Mail later than 2.1.3.
Relaunch Mail and test.
Ernie

Can't Print After Snow Leopard Upgrade

I have a home network centered around an Apple Airport Extreme Base Station. The base station is wired to a Linksys network switch which, in turn, is wired to two computers - an Apple Dual G5 running OS X 10.4.11 and a and Mac MIni which, until yesterday was running Leopard. I have an HP Laserjet P1006 connected to the USB port of the AEBS and, until yesterday, everything worked fine. Yesterday, I ran the Snow Leopard Upgrade on my Mini and now the Mini won't print to the HP over the network. If I connect the printer directly to the MIni, it works fine; as soon as I reconnect the printer to the AEBS, the Mini will no longer print. The lights on the printer will flash but nothing comes out. I have downloaded the HP Printer driver update from Apple but this didn't help. I have reset the AEBS, to no avail. The G5 running Tiger has no problems with printing. And, my daughter just got a brand-new MacBook Pro loaded with Snow Leopard from the factory and she can print to the HP over the network without any problems.
Any ideas?

When I upgraded iMac from Leopard to Snow Leopard 10.6 it also stopped printing wirelessly to Brother MFC6490CW.
I thought I had this same issue with my Epson printer when wireless printing. Actually, in SL, wireless printing is very slow at least with an Epson. Takes about 5 minutes or so for wireless print to even start. When checking the printing status app, it will start out saying "printer ready." Then after a few minutes it will say "looking for printer." A few minutes later it will say "printing."
When I go into the next room where the printer is, the green light is "flashing" letting me know that "printing" has started.
So I guess what I am trying to say is to check the printing status app after you click "print." It's possible "Brother" is just as slow as "Epson."
Message was edited by: CMCSK

PS3 and Safari crashes after Snow Leopard upgrade

How is everyone enjoying the crashes after their Snow Leopard upgrade? I can't save a photo using PS3, or download a photo to flickr or facebook without a crash. PS3 crashes, Safari crashes and work flow is at a crawl? Spoke with tech yesterday and they told me that this would stop if I downloaded Snow Leopard again, which I did, but the problem wasn't resolved. To top it off, I lost permissions on the iMac and can't use the computer. Please tell me where all of the accolades came from? Were the reviews done by people who actually work on their computers or by people who play on them? Oh, and another thing, lost my wireless access to the router and had to start all over. Be careful here, this has not been fun!

Excuse me, I meant to write CS3 instead of PS3.

Finder search "aliases" missing after Snow Leopard upgrade

I'm dealing with a crazy annoyance after upgrading from Leopard to Snow Leopard - currently running 10.6.2
I have 2 duplicate, external, 1TB WestDig Drives. I have no problems accessing these drives from the Finder, but if I use Finder search or Smart Folders, the corresponding folders on the external drives never open on the first try. I always receive the message:
+The alias “…” can’t be opened because the original item can’t be found.+
On the second try, search result folders open fine and I don't seem to have any further problems with a folder once it has been opened successfully from within search.
It seems that after my Snow Leopard upgrade every search on the external drive reveals "missing" folder aliases although the "aliases" appear as regular folder icons.
I tried re-indexing Spotlight but this did not solve the problem. I also trashed my plist files for Finder and Spotlight which didn't help either.
External Drive volume info from Terminal:
+drwxrwxr-x 21 782 Mar 14 17:18 PHOTOGRAPHY ARCHIVE+
FWIW I've found others having similar problems on the Apple forums HERE and HERE. I've tried their suggested PathFinder workaround without success.
This is driving me bonkers because it renders Smart Folders somewhat useless. Additionally, these external drives work fine on my old installation of 10.5 Leopard
Thanks for any help!

HI,
Try repairing disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

IDVD Quality Changed after Snow Leopard Upgrade

I created two different iDVD projects (slide shows with music) and burned them to DVDs - great quality, no problems with transitions, or quality of slides displayed. These copies were viewed in a BlueRay player, etc. After I upgraded to Snow Leopard I made two more copies without adding anything to the projects or changing the project settings. Quality is now terrible. The transitions are choppy, and each slide is displayed slightly less bright than it should be, then it jumps to a normal brightness, then goes back to a dimmer setting as the photos change. This did not occur on the originals before the OS upgrade. If I run the project on my MAC it all looks fine. This problem comes up after burning to DVD.
Any ideas?

Hi TJ1955
Welcome to apple discussions. Sorry to hear about the issues with burning to disc you are experiencing at the moment. I'm not sure I can help with this issue without being directly in front of your mac and seeing what's going on. So I'll simply supply you with the apple KB aticle detailing / troubleshooting burn issues to dvd.
http://support.apple.com/kb/HT1583?viewlocale=en_US
If you opt to return to the forum we'll also need more info on the mac model you are currently using and which third party items you have connected to it (if any). Lastly we will need to know how much available hard drive space is remaining on the boot volume (your main startup HD) as well as what type or brand of dvd's you are currently using and if it varied from the original /first burn.
As a final resort you may wish to try the following. Burn your iDvd project to a disc image from the file menu within iDvd (provided you have the available HD space). The disc image acts exactly like a dvd so use apple's dvd player to test for proper playback. Assuming it plays exactly as expected, then burn to Verbatim, Taiyo Yuden, or Maxell Dvd-R at 4x. Please avoid using Memorex while we troubleshoot your issue here. This latter brand of dvd's tends to introduce additional variables into the equation making troubleshooting all that much more complicated. Thereafter, (assuming we resolve the issue) feel free to use whatever brand works best for you and your mac.
Hope this helps but if not come on back.
Message was edited by: SDMacuser

Awful Color on Epson 2200 after Snow Leopard Upgrade

I'm an experience photographer and printer who has done extensive printing on the Epson 2200 under previous versions of the OS using CS4. As a beta tester for Snow Leopard I had used it extensively on another machine before the release, so I did not hesitate to upgrade my photography production computer as soon as it was available this past weekend.
The problem I now have is that print colors are all wrong - very greenish (bluish?), which is typically a symptom that nothing is managing the printing out of PS. (Reddish/purplish prints are often a symptom that color is being managed by both PS and the printer's own software.) I have changed nothing else in my workflow or printing process besides doing the upgrade - I have a solid workflow process that works consistently and accurately, or should I say it DID work so until the upgrade.
I have installed the updated 2200 drivers from the Epson web site. I have removed and re-added the printer in the preferences panel. Still no joy.
Help? Advice? Anything to try that I haven't thought of yet?
Thanks in advance,
Dan

Thanks for offering a possible solution - but it doesn't work if one prints in the recommended way out of PS CS4 and lower. The normal and correct way to print is (as the person following your post mentioned) to select "Photoshop Manages Colors" by selecting this option in the first print dialog box, click the "Print" button at the bottom left to bring up the next "Print" dialog window, use the "Color Management" tab and select "No Color Adjustment."
The awful print is just as it was before the process you described, I'm afraid.
Are you perhaps choosing "No Color Management" in the first print window and then "Color Controls" from the "Color Management" dialog in the second window? This turns color control over to the printer, which is not the best or most accurate way to print. With this option I do, as I mentioned earlier, get a print that is "less awful" than the horribly bad dark green/blue and unusable version when I print the correct way - but the colors are not right. The effect may be subtle if you are not very critical about printer output, but I'm comparing a print made a few days before the upgrade to the best I can get using this second-best method and the print is noticeably bluer and darker - not consistent with the print output I need.
The Gutenberg option sounds interesting, but I have yet to hear of anyone getting a simple and consistent method of precisely duplicating the results using the normal "Photoshop manages colors" approach. And with high quality printing, consistent and predictable results are absolutely critical.
One person reported online that he had contacted Epson, whose representative told him to "get a new printer - do you expect us to support a printer that is six years old!?" Very bad attitude and awfully poor customer support if true. If I ask Epson today how long their new printers will last, do you think they'll tell me "no more than six years after the printer was first introduced?" And don't forget that most of the prints were not purchased on the day of introduction "six years ago," but were purchased perhaps several years after that. If this continues to play out this way, one would be very wise to reconsider purchasing any Epson printer but the very newest model right after introduction - and it might be a better idea to compare support with other manufacturers of excellent photo printers. HP photo printers are every bit as good as Epson and Canon has been doing an increasingly fine job recently.
It also doesn't help that the Epson site is completely silent on the subject of this and many other printers relative to Snow Leopard. I would not like it, but if they really don't intend to support the 2200 and other printers, where is the list of those that they no longer support? (Apple issues such a list from time to time.)
Dan

Rocketfish bluetooth keyboard can't auto connect after snow leopard upgrade

Hi,
I have one of the newer model 2GHz Mac Mini's which I bought back in March. I've been using a Rocketfish model RF-ABTKB bluetooth keyboard (which I had been previously using on a windows system before getting the mac). Up to now, the keyboard had worked fine. Whenever I booted the mac, I'd use my bluetooth mouse to go to the bluetooth menu, scroll down to "Rocketfish Bluetooth Keyboard", and then select "connect" out of the sub menu, then would click the "connect" button on the underside of my keyboard and it would connect, every time.
I bought Snow Leopard on Friday & upgraded my machine. Since the upgrade, I no longer see the "connect" option for the keyboard in the bluetooth menu. The only option I see now in that sub-menu for the keyboard is "Open Keyboard Preferences...". If I go to the preferences window, click "set up bluetooth keyboard" at the bottom of the window and go through the pairing process again (going through the discovery process, entering the PIN that the mac generates, etc) it pairs and works fine (I'm actually using it to type this post). If I look at the keyboard sub-menu in the bluetooth menu after it's paired/connected, the "Disconnect" option is now available. The disconnect option itself is no surprise, it had been there in the past, but I thought it's odd that I can still see the disconnect option but not the connect option.
When I disconnect the keyboard (by either selecting that Disconnect option or by just not using it for 5 minutes & letting it go to sleep) the keyboard disconnects, the "shadow icon" fades on to the screen showing the keyboard is no longer connected, and I can go back to the bluetooth menu & still not see the same Connect option that used to be there before the upgrade.
My generic bluetooth mouse (doesn't have a brand name) continues to work with no issues. I called the support number for Rocketfish (which is really just a consumer electronics sub-brand of Best Buy), they said that their keyboard is fully compliant with Mac OS X and if the connect option is no longer showing up for the keyboard in the bluetooth menu, Apple must have done something that changed the way the mac is handling bluetooth.
Also, I did try removing the keyboard from the Bluetooth control panel in System Preferences and re-adding it from scratch, no change.
Anybody have any ideas???

Hello N:
I suspect that there has been some sort of incompatibility introduced. However, since this is an Apple forum, I recommend that you pursue the problem with "rocketfish." If is suggested troubleshooting steps, I might confuse the issue further as I would be focussed on Apple devices.
FWIW, no such problem has surfaced with Apple keyboards or mice. I am not trying to sell you one, I do not work for Apple.
Barry

Can't download files after Snow Leopard upgrade

Hello all,
yesterday I upgraded my leopard to snow leopard, since then I cannot download files with safari (also tried firefox, camino). When I click some link it looks like its going to start downloading but it doesn't. Most of the links are .dmg files. I have tried these steps so far but the problem still occurs.
1) Repair the Disk Permissions.
2) Downloaded onyx to clean the system.
3) Cleaned the safari cache and settings, as well as the plugins directory.
4) installed firefox and camino but they act the same.
5) I uninstalled iGetter (if I copy the link location and add it to iGetter I can download the file).
6) I created a new User to check if the problem was system wide or with the user account. The problem is the same in the new user account as well.
Any ideas what to try next ?
Thank you all in advance.
John.
ps: I have 10.6.2 and safari 4.04.

Try using your OnyX to clean the LaunchSevices caches, or use Terminal.
Launch /Utilities/Terminal and copy & paste this at the command line to rebuild LaunchServices:
Code:
<pre class="alt2" style="margin:0px; padding:3px; border:1px inset; width:640px; height:34px; overflow:auto">/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user</pre>
Then press return. Wait until terminal returns to the command line. Quit Terminal. After that, log out and back in or restart. Let us know
-mj

FCP Studio will not boot up after Snow leopard upgrade.

Everything was working fine on Leopard but decided to upgrade to Snow Leopard. Now the program stats up and we get to the splash screen then it quits. Anybody help me? so far Snow Leopard has been a complete waste of time, After effects on Mac will not work now either.

They all work except FCP 6 and After effects cs3. FCP is my main worry. I have a deadline to finish.

OS will not boot after Snow Leopard Upgrade

I have a MacPro (Intel). I just upgraded to Snow Leopard and everything appeared fine. However, after restarting my computer the OS will not load. A circle with a hash through it replaces the Apple logo and the apple's spinning wheel continues but all drive activity. I have tried to run the install again by forcing the computer to open the dvd drive then booting for the OS DVD but this has not worked. Has anyone experienced this and successfully resolved?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Macbook pro will not boot after snow leopard upgrade

My GF has had a macbook pro since mid 2008. It's been running like a champ since I've known her for the past 3 years with no issues. It has/had OSX 10.5.8 installed. We tried to consolidate all our pictures from all our apple devices and realized she didn't have an icloud on the old 10.5.8 OSX. So I called apple and they told me to order and install the snow leopard OSX 10.6 first and then upgrade to lion etc after that, Well we got the disk yesterday popped it in to install and it's been a disaster.... the computer shutdown for what looked like a normal restart during the installation process and never booted back up. Attempts to manually reboot leave us locked on a grey apple logo screen with spinning gear indefinately whith the Snow Leopard disk installed during boot up. With the disk removed I get the flashing file folder with a question mark. I called apple support we tried all the PRAM and SMC resets and then decided that we should go to the Genius Bar once all those failed. After an hour and a half drive to the nearest genius bar we were told that the we suddenly had a hardware issue which just happened to coincide with the new OS installation.... I'm not buying it and am looking for some help. The macbook was running like a champ until we inserted a disk recommended by apple... Any takers?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Isight not working with skype and tokbox after snow leopard upgrade

Recently, I upgraded from Tiger to Snow Leopard. After the upgrade, I found that my built-in iSight camera wasn't recognized on TokBox. On Skype, it said that the iSight camera was in use by another application (however no other applications were running). The iSight is working with iChat, so I don't know what is wrong... everything was fine when I was using Tiger!

hellokitty650 wrote:
Okay, so I restarted my computer and that didn't work.
Then, I went through the suggestions from the link you posted. I found that the iSight works in iChat and Photobooth; however, it does not work in iMovie HD (exactly the same in both user accounts on my computer). Just like before, the iSight is "in use by another application" in Skype on both user accounts.
I reset the SMC, but it didn't seem to help anything. Everything was acting the same as before I reset it.
I also noticed that my iTunes and my iMovie won't open; they both quit unexpectedly every time I try to open them. This happens in both user accounts as well.
Okay, so it will be simplest to work your issues in steps. We will start with iMovie.
Use your Mac's Disk Utility to repair permissions. Then reinstall iMovie HD 6. Repair permissions again after the installer finishes.
If the version of iMovie HD 6 in your iLife '06 DVD is not "6.0.3", download and install the update:
http://support.apple.com/kb/DL319
If you need to do this update, repair permissions again after the update is finished.
Test the reinstalled iMovie HD 6 to see if it works in more than one user account and post back the results.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Touchpad less reactive after Snow Leopard upgrade?

Similar Messages

Maybe you are looking for