Touchpad not detected after Xorg update
cat /proc/bus/input/devices:
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=800000000000 0 0 500f02102002 380307cf810d001 feffffdfffefffff ffffffffffffffff
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=event2
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/class/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=4000 0 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=0a5c Product=4502 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1a.0-2.2/input0
S: Sysfs=/class/input/input7
U: Uniq=
H: Handlers=kbd event7
B: EV=120013
B: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input8
U: Uniq=
H: Handlers=kbd event8
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=0a5c Product=4503 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1a.0-2.3/input0
S: Sysfs=/class/input/input9
U: Uniq=
H: Handlers=mouse1 event9
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=3
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input10
U: Uniq=
H: Handlers=kbd event10
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=05a9 Product=2640 Version=0100
N: Name="Laptop Integrated Webcam"
P: Phys=usb-0000:00:1d.7-6
S: Sysfs=/class/input/input11
U: Uniq=
H: Handlers=event11
B: EV=3
B: KEY=1 0 0 0 0
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/class/input/input12
U: Uniq=
H: Handlers=mouse2 event12
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
mcmillan wrote:Probably related to the xorg upgrade with hotplugging
http://wiki.archlinux.org/index.php/Xor … otplugging
If you haven't already searched the forums there seem to be a few threads going already where people are dealing with issues with this upgrade
I searched and got my keyboard and touchpad set up to work with hotplugging. Keyboard worked, touchpad did not. Any configuration changes I made dont get reconginzed. I dont know what the deal is unfortunately
Similar Messages
-
Plz help, "device not detected" after windows updates?? I have so
I have An Audigy 2 ZS, and have the latest drivers. It has been working PERFECT, LAST NIGHT I had like 0 WINDOWS UPDATES, i dont' know if any of these had anything to do with this. But, I just now went to the icon in the task bar, and went to change SPEAKER SETTINGS to switch to HEADPHONES as I ALWAYS DO, I was surprised when the "unable to change the sound device to your selected device", you press ok, and it comes up TWO MORE TIMES, Right after each other.
I DO HAVE SOUND, FOR NOW. I have read other mentioning this error, but I didn't seem to find any answers. I can't go to speaker settings, or Surround Mixer,
OK, NOW I tried to go to GRAPHICS EQ, and an error came up that said "THE AUDIO DEVICE SUPPORTED BY THIS APPLICATION IS NOT DETECTED, THE APPLICATION WILL EXIT"
What is going on?
I went to device manager and it says that the device is working properly, and I DO have sound.
I DON'T get it. And I'm not likeing this. This is starting to worry me.
Does ANYONE know what is going on.. PLZ?Thanx for the reply. I just now fixed it. I'm not totally sure what I did. Earlier I had uninstalled the device from Device manager, and then restarted, and it installed the drivers from the CD. It didn't fix it. So, I ran the LIVE update here at creative.com and downloaded the version I had before, I guess because when i had ran the update before I uninstalled the device the update wasn't there.
But, it started to update, and said something it had to restart the pc in order to install the update, and after it installed the new "creative audio console" it now works.
the whole thing was strange since I dind't lose sound at all. Just couldn't access settings. -
Hard drives not detected after bios update
Hello
K7T Turbo 2 kt133a
I bought a new chip a while back and therefore updated my bios.
My system has worked on and off for a while now, however i have not been able to get it to boot for 2 days.
I have tried bios version 3.4, 3.5, and 3.6, the same thing in all cases.
So i decided that the problem was not the bios, but my IDE cable, so i installed another one, still no had drives!!
even when my first hard drive is recognized and the system boots, the secon hard drive isn never detected.
What do I do now???
Dude I think i migh just have to order a dell.......
Any help would be great
thanksHi
jumpers should be right
the top HD (on the end of the cable) is l:::
and the bottom (slave i assume) is ::l:
My PSU details are as follows (dont know much about power supplys)
it is called a switching power supply (likely not a very good one)
Max output is 300W
115V / 7A / 60hz
+3.3 +5 +12 -12 -5 +5sb Blk Grn Gry
14A 30A 10A 0.5A 0.5A 1.5A Com p-on PG
Hope this heps
I have thought that this PS was a POS (piece of ) since day 1, so if i need to replace tell me what to get, this thing is loud, and the system has never been overly stable (the computer has always powered down etc on its own
Thanks Guys -
T61p 6459CT Hard not detectable after BIOS update
Hi,
I had tochange my hard disk as the original hard disk crashed. installed OS and started to update drivers starting with BIOS. Installed 2.29-1.08 and restarted the system, initialized BIOS and restarted again and system doesnt boot up.
Am receiving this error:
http://img29.imageshack.us/img29/1326/10082011427.jpg
Any help on this is highly appreciated.
Moderator edit: Image >50k converted to link, per the Community Rules.
Solved!
Go to Solution.Your problem seems to be related to the subject in this knowledgebase article as my guess is you have installed XP?
To change the setting back to compatabilty you need to enter BIOS and change it in the Config > SATA menu.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Sim card was not detect after upgrade my iphone4s to ios 6.0.1
my sim card was not detected after i update to ios 6.0.1
i had ald try many time plug in n out my sim card it keep on show searching no service or no sim
i had reset my network setting n i reset all n now i cant activate my iphoneConnect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e0f22e92de98ebae10e 3fd537c16619e.jpg -
why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
Mic Jack not working after Driver Update, Console unavailable, can't install
LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
I'm running on Windows Vista Ultimate, 64-bit
My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
Any help would be greatly appreciated.
I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.
-
Phone not working after OS update, phone not working after OS update
phone not working after OS update, phone not working after OS update
I do have a questiion. I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen. It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!! I have tried holding down the home key and power button several times and the same message continues to appear.
-
My facetime on iphone 4 is not working after the update to IOS7
Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working after The update to IOS7 Thanks xxx
Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M. -
Videofunction on iphone 4 is not working after the update to IOS7
Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
Anyone else experiencing the same problem?
Anyone with solutions?
Thanks!Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M. -
My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks
"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
C1-01 not working after Nokia update
Hi,
C1-01 not working after Nokia update.
Message shows "Updating" then blank screen, any ideas?How did you start the update? OTA or using Nokia Suite?
Try to run the update through Nokia Suite again.
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button. -
Aperture crashed and will not open after last update. Anyone else have this problem?
Aperture crashed and will not open after last update. Anyone else have this problem?
Yes. See this very forum for 50 threads on it, that explain the solution.
-
1080p videos not working after fp2 update
some videos are not working after fp2 update..videos which are worked in fp1 also not working after belle fp2 update...it sucks
What is the phone model?
Could you give us the url to the video on question? -
Facebook birthdays not working after ios7 update
Facebook birthdays not working after ios7 update?
Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection.
Maybe you are looking for
-
Home sharing problems since Apple TV update
Hello everyone; I have a Apple TV 2, an iPhone 4S, an iPad 2 and a Macbook pro 17" on the same iCloud account. Syncing of data between the computer and two iOS devices has been rock solid. Kudos on this system architecture, it is exactly what I have
-
When I am on a website like say Southwest Airlines and there are drop down menus to choose dates, cities, etc. The drop down flashes quickly and then goes away. I can't use the drop down on the next question -- This happened.
-
How do I upgrade the IOS in my 3G iphone using the usb cable hooked to my computer ?
-
Help, i cant sign into my itunes account or purchase anything
Im not sure if this have been posted recently or not but im having problems with my itunes. it wont let me sign into my account. it doesnt even give me a reason for it. i cant purchase. if i click purchase my sign in will pop up and i'll enter my pas
-
IOS 8.0.2 camera not available from lock screen
iPhone 6, upgraded to iOS 8.0.2 last night. Now at the lock screen, the camera icon is there but you cannot scroll up to activate it.