Touchpad now working (not detected)

Question

Good day,
Since a week (maybe kernel 3.3.2 update, not sure) ago my touchpad stopped working (at all). I have attempted googling many times but could not fix it (neither do I found a bug in arch or anywhere for that). Today (kernel 3.3.3) it got working twice after restarts (out of nowhere), but no more.
What I've found is that it seem to not be detected (or it's detected as something completely different that doesn't even get close to a touchpad). It doesn't show up in Xorg.0.log, nor dmesg, nor in /proc/bus/input/devices.
Please, suggest where to dig - will provide more information (logs) if not enough.
Below are attached the logs after a fresh restart (touchpad not working):
Xorg.0.log
[ 15.861]
X.Org X Server 1.12.1
Release Date: 2012-04-13
[ 15.861] X Protocol Version 11, Revision 0
[ 15.861] Build Operating System: Linux 3.3.1-1-ARCH x86_64
[ 15.861] Current Operating System: Linux arch-vostro 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:41:07 CEST 2012 x86_64
[ 15.861] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3804e7a-2c2c-4e96-b9fe-50542609dc73 ro ipv6.disable=1 quiet
[ 15.861] Build Date: 14 April 2012 07:09:45AM
[ 15.861]
[ 15.861] Current version of pixman: 0.24.4
[ 15.861] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.861] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.862] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 25 21:51:33 2012
[ 16.007] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.043] (==) No Layout section. Using the first Screen section.
[ 16.043] (==) No screen section available. Using defaults.
[ 16.043] (**) |-->Screen "Default Screen Section" (0)
[ 16.043] (**) | |-->Monitor "<default monitor>"
[ 16.043] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 16.043] (==) Automatically adding devices
[ 16.043] (==) Automatically enabling devices
[ 16.159] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 16.159] Entry deleted from font path.
[ 16.166] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 16.166] Entry deleted from font path.
[ 16.166] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 16.166] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 16.166] Entry deleted from font path.
[ 16.166] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 16.166] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 16.166] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.166] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.166] (II) Loader magic: 0x7c7ae0
[ 16.166] (II) Module ABI versions:
[ 16.166] X.Org ANSI C Emulation: 0.4
[ 16.166] X.Org Video Driver: 12.0
[ 16.166] X.Org XInput driver : 16.0
[ 16.166] X.Org Server Extension : 6.0
[ 16.168] (--) PCI:*(0:1:0:0) 10de:0427:1028:0273 rev 161, Mem @ 0xca000000/16777216, 0xd0000000/268435456, 0xc8000000/33554432, I/O @ 0x00002000/128
[ 16.168] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 16.168] (II) LoadModule: "extmod"
[ 16.232] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 16.248] (II) Module extmod: vendor="X.Org Foundation"
[ 16.248] compiled for 1.12.1, module version = 1.0.0
[ 16.248] Module class: X.Org Server Extension
[ 16.248] ABI class: X.Org Server Extension, version 6.0
[ 16.248] (II) Loading extension MIT-SCREEN-SAVER
[ 16.248] (II) Loading extension XFree86-VidModeExtension
[ 16.248] (II) Loading extension XFree86-DGA
[ 16.248] (II) Loading extension DPMS
[ 16.248] (II) Loading extension XVideo
[ 16.248] (II) Loading extension XVideo-MotionCompensation
[ 16.248] (II) Loading extension X-Resource
[ 16.248] (II) LoadModule: "dbe"
[ 16.249] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 16.259] (II) Module dbe: vendor="X.Org Foundation"
[ 16.259] compiled for 1.12.1, module version = 1.0.0
[ 16.259] Module class: X.Org Server Extension
[ 16.259] ABI class: X.Org Server Extension, version 6.0
[ 16.259] (II) Loading extension DOUBLE-BUFFER
[ 16.259] (II) LoadModule: "glx"
[ 16.259] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.135] (II) Module glx: vendor="NVIDIA Corporation"
[ 17.143] compiled for 4.0.2, module version = 1.0.0
[ 17.143] Module class: X.Org Server Extension
[ 17.143] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:57:38 PDT 2012
[ 17.143] (II) Loading extension GLX
[ 17.143] (II) LoadModule: "record"
[ 17.143] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 17.158] (II) Module record: vendor="X.Org Foundation"
[ 17.158] compiled for 1.12.1, module version = 1.13.0
[ 17.158] Module class: X.Org Server Extension
[ 17.158] ABI class: X.Org Server Extension, version 6.0
[ 17.158] (II) Loading extension RECORD
[ 17.158] (II) LoadModule: "dri"
[ 17.158] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 17.199] (II) Module dri: vendor="X.Org Foundation"
[ 17.199] compiled for 1.12.1, module version = 1.0.0
[ 17.199] ABI class: X.Org Server Extension, version 6.0
[ 17.199] (II) Loading extension XFree86-DRI
[ 17.199] (II) LoadModule: "dri2"
[ 17.199] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 17.214] (II) Module dri2: vendor="X.Org Foundation"
[ 17.214] compiled for 1.12.1, module version = 1.2.0
[ 17.214] ABI class: X.Org Server Extension, version 6.0
[ 17.214] (II) Loading extension DRI2
[ 17.214] (==) Matched nouveau as autoconfigured driver 0
[ 17.214] (==) Matched nvidia as autoconfigured driver 1
[ 17.214] (==) Matched nv as autoconfigured driver 2
[ 17.214] (==) Matched vesa as autoconfigured driver 3
[ 17.214] (==) Matched fbdev as autoconfigured driver 4
[ 17.214] (==) Assigned the driver to the xf86ConfigLayout
[ 17.214] (II) LoadModule: "nouveau"
[ 17.219] (WW) Warning, couldn't open module nouveau
[ 17.219] (II) UnloadModule: "nouveau"
[ 17.219] (II) Unloading nouveau
[ 17.219] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 17.219] (II) LoadModule: "nvidia"
[ 17.219] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 17.322] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 17.323] compiled for 4.0.2, module version = 1.0.0
[ 17.323] Module class: X.Org Video Driver
[ 17.349] (II) LoadModule: "nv"
[ 17.349] (WW) Warning, couldn't open module nv
[ 17.349] (II) UnloadModule: "nv"
[ 17.349] (II) Unloading nv
[ 17.349] (EE) Failed to load module "nv" (module does not exist, 0)
[ 17.349] (II) LoadModule: "vesa"
[ 17.349] (WW) Warning, couldn't open module vesa
[ 17.349] (II) UnloadModule: "vesa"
[ 17.349] (II) Unloading vesa
[ 17.349] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 17.349] (II) LoadModule: "fbdev"
[ 17.349] (WW) Warning, couldn't open module fbdev
[ 17.349] (II) UnloadModule: "fbdev"
[ 17.349] (II) Unloading fbdev
[ 17.349] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 17.350] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:38:35 PDT 2012
[ 17.350] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 17.362] (++) using VT number 7
[ 17.442] (II) Loading sub module "fb"
[ 17.442] (II) LoadModule: "fb"
[ 17.442] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.457] (II) Module fb: vendor="X.Org Foundation"
[ 17.457] compiled for 1.12.1, module version = 1.0.0
[ 17.457] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.457] (II) Loading sub module "wfb"
[ 17.457] (II) LoadModule: "wfb"
[ 17.457] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 17.471] (II) Module wfb: vendor="X.Org Foundation"
[ 17.471] compiled for 1.12.1, module version = 1.0.0
[ 17.471] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.471] (II) Loading sub module "ramdac"
[ 17.471] (II) LoadModule: "ramdac"
[ 17.471] (II) Module "ramdac" already built-in
[ 17.511] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 17.511] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 17.511] (==) NVIDIA(0): RGB weight 888
[ 17.511] (==) NVIDIA(0): Default visual is TrueColor
[ 17.511] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.511] (**) NVIDIA(0): Enabling 2D acceleration
[ 19.252] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 19.252] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.262] (II) NVIDIA(0): NVIDIA GPU GeForce 8400M GS (G86M) at PCI:1:0:0 (GPU-0)
[ 19.263] (--) NVIDIA(0): Memory: 524288 kBytes
[ 19.263] (--) NVIDIA(0): VideoBIOS: 60.86.64.00.27
[ 19.263] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 19.263] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 19.270] (--) NVIDIA(0): Connected display device(s) on GeForce 8400M GS at PCI:1:0:0
[ 19.270] (--) NVIDIA(0): Seiko/Epson (DFP-0)
[ 19.270] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 19.270] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[ 19.270] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.270] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 19.270] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.316] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 19.316] (==) NVIDIA(0):
[ 19.316] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 19.316] (==) NVIDIA(0): will be used as the requested mode.
[ 19.316] (==) NVIDIA(0):
[ 19.316] (II) NVIDIA(0): Validated modes:
[ 19.316] (II) NVIDIA(0): "nvidia-auto-select"
[ 19.316] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 20.327] (--) NVIDIA(0): DPI set to (110, 108); computed from "UseEdidDpi" X config
[ 20.327] (--) NVIDIA(0): option
[ 20.327] (--) Depth 24 pixmap format is 32 bpp
[ 20.327] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 20.347] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 20.347] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 20.347] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 20.347] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 20.347] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 20.347] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 20.347] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 20.347] (II) NVIDIA(0): Config Options in the README.
[ 20.359] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 20.684] (II) Loading extension NV-GLX
[ 20.780] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 20.780] (==) NVIDIA(0): Backing store disabled
[ 20.780] (==) NVIDIA(0): Silken mouse enabled
[ 20.781] (==) NVIDIA(0): DPMS enabled
[ 20.781] (II) Loading extension NV-CONTROL
[ 20.782] (II) Loading extension XINERAMA
[ 20.782] (II) Loading sub module "dri2"
[ 20.782] (II) LoadModule: "dri2"
[ 20.782] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.782] (II) Module dri2: vendor="X.Org Foundation"
[ 20.782] compiled for 1.12.1, module version = 1.2.0
[ 20.782] ABI class: X.Org Server Extension, version 6.0
[ 20.782] (II) NVIDIA(0): [DRI2] Setup complete
[ 20.782] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 20.782] (==) RandR enabled
[ 20.782] (II) Initializing built-in extension Generic Event Extension
[ 20.782] (II) Initializing built-in extension SHAPE
[ 20.782] (II) Initializing built-in extension MIT-SHM
[ 20.782] (II) Initializing built-in extension XInputExtension
[ 20.782] (II) Initializing built-in extension XTEST
[ 20.782] (II) Initializing built-in extension BIG-REQUESTS
[ 20.782] (II) Initializing built-in extension SYNC
[ 20.782] (II) Initializing built-in extension XKEYBOARD
[ 20.782] (II) Initializing built-in extension XC-MISC
[ 20.782] (II) Initializing built-in extension SECURITY
[ 20.782] (II) Initializing built-in extension XINERAMA
[ 20.782] (II) Initializing built-in extension XFIXES
[ 20.782] (II) Initializing built-in extension RENDER
[ 20.782] (II) Initializing built-in extension RANDR
[ 20.782] (II) Initializing built-in extension COMPOSITE
[ 20.782] (II) Initializing built-in extension DAMAGE
[ 20.783] (II) Initializing extension GLX
[ 21.299] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.300] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.300] (II) LoadModule: "evdev"
[ 21.300] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.309] (II) Module evdev: vendor="X.Org Foundation"
[ 21.309] compiled for 1.12.0, module version = 2.7.0
[ 21.309] Module class: X.Org XInput Driver
[ 21.309] ABI class: X.Org XInput driver, version 16.0
[ 21.309] (II) Using input driver 'evdev' for 'Power Button'
[ 21.309] (**) Power Button: always reports core events
[ 21.309] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 21.309] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.309] (--) evdev: Power Button: Found keys
[ 21.309] (II) evdev: Power Button: Configuring as keyboard
[ 21.309] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 21.309] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.309] (**) Option "xkb_rules" "evdev"
[ 21.309] (**) Option "xkb_model" "evdev"
[ 21.309] (**) Option "xkb_layout" "us"
[ 21.329] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 21.329] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 21.329] (II) Using input driver 'evdev' for 'Video Bus'
[ 21.329] (**) Video Bus: always reports core events
[ 21.329] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 21.329] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 21.329] (--) evdev: Video Bus: Found keys
[ 21.329] (II) evdev: Video Bus: Configuring as keyboard
[ 21.329] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5/event5"
[ 21.329] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 21.329] (**) Option "xkb_rules" "evdev"
[ 21.329] (**) Option "xkb_model" "evdev"
[ 21.329] (**) Option "xkb_layout" "us"
[ 21.330] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 21.330] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.330] (II) Using input driver 'evdev' for 'Power Button'
[ 21.330] (**) Power Button: always reports core events
[ 21.330] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 21.330] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.330] (--) evdev: Power Button: Found keys
[ 21.330] (II) evdev: Power Button: Configuring as keyboard
[ 21.330] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 21.330] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 21.330] (**) Option "xkb_rules" "evdev"
[ 21.330] (**) Option "xkb_model" "evdev"
[ 21.330] (**) Option "xkb_layout" "us"
[ 21.330] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 21.330] (II) No input driver specified, ignoring this device.
[ 21.330] (II) This device may have been added with another device file.
[ 21.330] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 21.330] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.330] (II) Using input driver 'evdev' for 'Sleep Button'
[ 21.330] (**) Sleep Button: always reports core events
[ 21.330] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 21.330] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 21.330] (--) evdev: Sleep Button: Found keys
[ 21.330] (II) evdev: Sleep Button: Configuring as keyboard
[ 21.331] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 21.331] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 21.331] (**) Option "xkb_rules" "evdev"
[ 21.331] (**) Option "xkb_model" "evdev"
[ 21.331] (**) Option "xkb_layout" "us"
[ 21.331] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event11)
[ 21.331] (**) Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[ 21.331] (II) Using input driver 'evdev' for 'Integrated Webcam'
[ 21.331] (**) Integrated Webcam: always reports core events
[ 21.331] (**) evdev: Integrated Webcam: Device: "/dev/input/event11"
[ 21.331] (--) evdev: Integrated Webcam: Vendor 0xc45 Product 0x63e0
[ 21.331] (--) evdev: Integrated Webcam: Found keys
[ 21.331] (II) evdev: Integrated Webcam: Configuring as keyboard
[ 21.331] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input11/event11"
[ 21.331] (II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD, id 10)
[ 21.331] (**) Option "xkb_rules" "evdev"
[ 21.331] (**) Option "xkb_model" "evdev"
[ 21.331] (**) Option "xkb_layout" "us"
[ 21.332] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 21.332] (II) No input driver specified, ignoring this device.
[ 21.332] (II) This device may have been added with another device file.
[ 21.332] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 21.332] (II) No input driver specified, ignoring this device.
[ 21.332] (II) This device may have been added with another device file.
[ 21.332] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 21.332] (II) No input driver specified, ignoring this device.
[ 21.332] (II) This device may have been added with another device file.
[ 21.332] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 21.332] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.332] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.332] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.332] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 21.332] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.332] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.332] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.332] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 21.332] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 21.332] (**) Option "xkb_rules" "evdev"
[ 21.332] (**) Option "xkb_model" "evdev"
[ 21.332] (**) Option "xkb_layout" "us"
[ 21.333] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 21.333] (II) No input driver specified, ignoring this device.
[ 21.333] (II) This device may have been added with another device file.
[ 21.333] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 21.333] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.333] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 21.333] (**) Dell WMI hotkeys: always reports core events
[ 21.333] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7"
[ 21.333] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 21.333] (--) evdev: Dell WMI hotkeys: Found keys
[ 21.333] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 21.333] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 21.333] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[ 21.333] (**) Option "xkb_rules" "evdev"
[ 21.333] (**) Option "xkb_model" "evdev"
[ 21.333] (**) Option "xkb_layout" "us"
[ 39.462] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/event12)
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: Applying InputClass "evdev pointer catchall"
[ 39.462] (II) Using input driver 'evdev' for 'Microsoft Bluetooth Notebook Mouse 5000'
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: always reports core events
[ 39.462] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: Device: "/dev/input/event12"
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Vendor 0x45e Product 0x700
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found 8 mouse buttons
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found scroll wheel(s)
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found relative axes
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found x and y relative axes
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found absolute axes
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Forcing absolute x/y axes to exist.
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Configuring as mouse
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Adding scrollwheel support
[ 39.462] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: YAxisMapping: buttons 4 and 5
[ 39.462] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 39.462] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/bluetooth/hci0/hci0:46/input12/event12"
[ 39.462] (II) XINPUT: Adding extended input device "Microsoft Bluetooth Notebook Mouse 5000" (type: MOUSE, id 13)
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: initialized for relative axes.
[ 39.462] (WW) evdev: Microsoft Bluetooth Notebook Mouse 5000: ignoring absolute axes.
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) keeping acceleration scheme 1
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration profile 0
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration factor: 2.000
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration threshold: 4
[ 39.462] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/mouse0)
[ 39.462] (II) No input driver specified, ignoring this device.
[ 39.462] (II) This device may have been added with another device file.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120414 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Apr 23 09:41:07 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3804e7a-2c2c-4e96-b9fe-50542609dc73 ro ipv6.disable=1 quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. Vostro1510/0G914C, BIOS A10 07/10/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f76f0] f76f0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfed0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfed0000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ bfeca000-bfed0000
[ 0.000000] RAMDISK: 37a4e000 - 37d1f000
[ 0.000000] ACPI: RSDP 00000000000f7670 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000bfed689a 0008C (v01 DELL M08 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfedecd6 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bfed7db1 06EB1 (v02 TOSCPL CRESTLNE 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 00000000bfee2fc0 00040
[ 0.000000] ACPI: APIC 00000000bfededca 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 00000000bfedee32 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bfedee6a 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 00000000bfedeea6 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 00000000bfedeed8 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: OSFR 00000000bfedeefe 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
[ 0.000000] ACPI: APIC 00000000bfedef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfedefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfed7b04 002AD (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed6eb2 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed6e0c 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed6926 004E6 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048159
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 765712 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bfee3000
[ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82176 r8192 d24320 u1048576
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027674
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3804e7a-2c2c-4e96-b9fe-50542609dc73 ro ipv6.disable=1 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046772k/5242880k available (4495k kernel code, 1050244k absent, 145864k reserved, 4327k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2493.737 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.28 BogoMIPS (lpj=8312456)
[ 0.003341] pid_max: default: 32768 minimum: 301
[ 0.003366] Security Framework initialized
[ 0.003372] AppArmor: AppArmor disabled by boot time parameter
[ 0.003684] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007297] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008428] Mount-cache hash table entries: 256
[ 0.008584] Initializing cgroup subsys cpuacct
[ 0.008587] Initializing cgroup subsys memory
[ 0.008597] Initializing cgroup subsys devices
[ 0.008599] Initializing cgroup subsys freezer
[ 0.008601] Initializing cgroup subsys net_cls
[ 0.008603] Initializing cgroup subsys blkio
[ 0.008639] CPU: Physical Processor ID: 0
[ 0.008640] CPU: Processor Core ID: 0
[ 0.008642] mce: CPU supports 6 MCE banks
[ 0.008650] CPU0: Thermal monitoring handled by SMI
[ 0.008654] using mwait in idle threads.
[ 0.009761] ACPI: Core revision 20120111
[ 0.013342] ftrace: allocating 17484 entries in 69 pages
[ 0.020455] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056107] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073465] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100006] Booting Node 0, Processors #1 Ok.
[ 0.100008] smpboot cpu 1: start_ip = 9a000
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.113362] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.119996] Brought up 2 CPUs
[ 0.119998] Total of 2 processors activated (9978.57 BogoMIPS).
[ 0.122938] devtmpfs: initialized
[ 0.124435] PM: Registering ACPI NVS region at bfed0000 (77824 bytes)
[ 0.124435] NET: Registered protocol family 16
[ 0.124435] ACPI: bus type pci registered
[ 0.124435] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.124435] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.162520] PCI: Using configuration type 1 for base access
[ 0.162527] dmi type 0xB1 record - unknown flag
[ 0.163353] bio: create slab <bio-0> at 0
[ 0.163355] ACPI: Added _OSI(Module Device)
[ 0.163355] ACPI: Added _OSI(Processor Device)
[ 0.163357] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.163358] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.164422] ACPI: EC: Look up EC in DSDT
[ 0.170006] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.170470] ACPI: SSDT 00000000bfed7780 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.170725] ACPI: Dynamic OEM Table Load:
[ 0.170728] ACPI: SSDT (null) 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.170826] ACPI: SSDT 00000000bfed7111 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.173475] ACPI: Dynamic OEM Table Load:
[ 0.173478] ACPI: SSDT (null) 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.173641] ACPI: SSDT 00000000bfed7a3c 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 0.173891] ACPI: Dynamic OEM Table Load:
[ 0.173893] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 0.173957] ACPI: SSDT 00000000bfed76fb 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.174201] ACPI: Dynamic OEM Table Load:
[ 0.174203] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.174421] ACPI: Interpreter enabled
[ 0.174424] ACPI: (supports S0 S3 S4 S5)
[ 0.174439] ACPI: Using IOAPIC for interrupt routing
[ 0.237181] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.237303] ACPI: No dock devices found.
[ 0.237306] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.237549] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.237987] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.237990] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.237992] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.237994] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.237996] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.237998] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.238001] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.238003] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.238040] PCI host bridge to bus 0000:00
[ 0.238042] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.238044] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.238046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.238048] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.238050] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.238051] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.238053] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.238055] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.238064] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.238108] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
[ 0.238148] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.238200] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.238256] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.238299] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.238354] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.238409] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.238434] pci 0000:00:1a.7: reg 10: [mem 0xf8304800-0xf8304bff]
[ 0.238543] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.238576] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.238597] pci 0000:00:1b.0: reg 10: [mem 0xf8300000-0xf8303fff 64bit]
[ 0.238698] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.238730] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.238838] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.238872] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.238980] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.239015] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.239123] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.239156] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.239264] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.239296] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.239351] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
[ 0.239393] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.239449] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
[ 0.239490] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.239544] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
[ 0.239600] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.239624] pci 0000:00:1d.7: reg 10: [mem 0xf8304c00-0xf8304fff]
[ 0.239733] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.239759] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.239854] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.239962] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.239968] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.239972] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.239976] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[ 0.240040] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.240056] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.240069] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.240081] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.240092] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.240105] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
[ 0.240159] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.240185] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
[ 0.240196] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
[ 0.240208] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
[ 0.240220] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
[ 0.240231] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.240243] pci 0000:00:1f.2: reg 24: [mem 0xf8304000-0xf83047ff]
[ 0.240307] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.240331] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.240347] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.240387] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.240474] pci 0000:01:00.0: [10de:0427] type 0 class 0x000300
[ 0.240494] pci 0000:01:00.0: reg 10: [mem 0xca000000-0xcaffffff]
[ 0.240515] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.240536] pci 0000:01:00.0: reg 1c: [mem 0xc8000000-0xc9ffffff 64bit]
[ 0.240551] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.240565] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.240669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.240672] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.240675] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcaffffff]
[ 0.240679] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.240738] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.240743] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.240747] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
[ 0.240755] pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.240815] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.240819] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.240824] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
[ 0.240831] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.241146] pci 0000:06:00.0: [14e4:4315] type 0 class 0x000280
[ 0.241215] pci 0000:06:00.0: reg 10: [mem 0xf4000000-0xf4003fff 64bit]
[ 0.241595] pci 0000:06:00.0: supports D1 D2
[ 0.241597] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.241777] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.241782] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.241786] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.241793] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
[ 0.241928] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
[ 0.241988] pci 0000:07:00.0: reg 10: [io 0x6000-0x60ff]
[ 0.242097] pci 0000:07:00.0: reg 18: [mem 0xf8410000-0xf8410fff 64bit pref]
[ 0.242168] pci 0000:07:00.0: reg 20: [mem 0xf8400000-0xf840ffff 64bit pref]
[ 0.242213] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.242482] pci 0000:07:00.0: supports D1 D2
[ 0.242484] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.242650] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
[ 0.242654] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.242665] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf84fffff 64bit pref]
[ 0.242717] pci 0000:08:05.0: [1217:00f7] type 0 class 0x000c00
[ 0.242738] pci 0000:08:05.0: reg 10: [mem 0xf8000000-0xf8000fff]
[ 0.242750] pci 0000:08:05.0: reg 14: [mem 0xf8002000-0xf80027ff]
[ 0.242837] pci 0000:08:05.0: supports D1 D2
[ 0.242839] pci 0000:08:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.242866] pci 0000:08:05.2: [1217:7120] type 0 class 0x000805
[ 0.242891] pci 0000:08:05.2: reg 10: [mem 0xf8002800-0xf80028ff]
[ 0.243002] pci 0000:08:05.2: supports D1 D2
[ 0.243004] pci 0000:08:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243031] pci 0000:08:05.3: [1217:7130] type 0 class 0x000180
[ 0.243055] pci 0000:08:05.3: reg 10: [mem 0xf8001000-0xf8001fff]
[ 0.243168] pci 0000:08:05.3: supports D1 D2
[ 0.243170] pci 0000:08:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243235] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.243243] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.243250] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.243253] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.243255] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.243257] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.243259] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.243261] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.243263] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.243265] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.243301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.243423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.243461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.243493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.243526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.243558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.243610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.243650] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.243652] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.243654] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.247869] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.247912] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.247952] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.247991] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.248029] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.248068] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.248106] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.248145] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.248198] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.248198] vgaarb: loaded
[ 0.248198] vgaarb: bridge control possible 0000:01:00.0
[ 0.248198] PCI: Using ACPI for IRQ routing
[ 0.259277] PCI: pci_cache_line_size set to 64 bytes
[ 0.259762] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.259764] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
[ 0.259862] NetLabel: Initializing
[ 0.259864] NetLabel: domain hash size = 128
[ 0.259865] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259877] NetLabel: unlabeled traffic allowed by default
[ 0.259881] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.259886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.259890] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.269997] Switching to clocksource hpet
[ 0.276375] pnp: PnP ACPI init
[ 0.276393] ACPI: bus type pnp registered
[ 0.276659] pnp 00:00: [bus 00-ff]
[ 0.276661] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.276676] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.276678] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.276680] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.276681] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.276683] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.276685] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.276687] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.276689] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.276691] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.276692] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.276694] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.276696] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.276698] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.276700] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.276702] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.276704] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.276705] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.276707] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.276713] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.276771] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.276835] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.276837] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.276839] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.276840] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.276842] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.276843] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.276845] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.276847] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.276900] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.276902] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.276904] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.276907] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.276909] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.276911] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.276913] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.276915] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.276918] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277064] pnp 00:02: [io 0x0000-0x001f]
[ 0.277066] pnp 00:02: [io 0x0081-0x0091]
[ 0.277068] pnp 00:02: [io 0x0093-0x009f]
[ 0.277069] pnp 00:02: [io 0x00c0-0x00df]
[ 0.277071] pnp 00:02: [dma 4]
[ 0.277108] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.277116] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.277151] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.277208] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.277259] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.277262] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.277271] pnp 00:05: [io 0x00f0]
[ 0.277281] pnp 00:05: [irq 13]
[ 0.277318] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.277328] pnp 00:06: [io 0x002e-0x002f]
[ 0.277329] pnp 00:06: [io 0x0061]
[ 0.277331] pnp 00:06: [io 0x0063]
[ 0.277332] pnp 00:06: [io 0x0065]
[ 0.277334] pnp 00:06: [io 0x0067]
[ 0.277335] pnp 00:06: [io 0x0080]
[ 0.277337] pnp 00:06: [io 0x0092]
[ 0.277338] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.277340] pnp 00:06: [io 0x0680-0x069f]
[ 0.277342] pnp 00:06: [io 0x0800-0x080f]
[ 0.277343] pnp 00:06: [io 0x1000-0x107f]
[ 0.277345] pnp 00:06: [io 0x1180-0x11bf]
[ 0.277346] pnp 00:06: [io 0xfe00]
[ 0.277348] pnp 00:06: [io 0xff00-0xff7f]
[ 0.277409] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.277412] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.277414] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.277416] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.277418] system 00:06: [io 0xfe00] has been reserved
[ 0.277420] system 00:06: [io 0xff00-0xff7f] has been reserved
[ 0.277423] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277431] pnp 00:07: [io 0x0070-0x0077]
[ 0.277436] pnp 00:07: [irq 8]
[ 0.277471] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.303369] pnp 00:08: [io 0x0060]
[ 0.303371] pnp 00:08: [io 0x0064]
[ 0.303376] pnp 00:08: [irq 1]
[ 0.303417] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.303428] pnp 00:09: [irq 12]
[ 0.303469] pnp 00:09: Plug and Play ACPI device, IDs SYN0705 SYN0700 SYN0002 PNP0f13 (active)
[ 0.303485] pnp: PnP ACPI: found 10 devices
[ 0.303486] ACPI: ACPI bus type pnp unregistered
[ 0.310427] PCI: max bus depth: 1 pci_try_num: 2
[ 0.310483] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc4000000-0xc40fffff]
[ 0.310487] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc4100000-0xc41000ff]
[ 0.310493] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc4200000-0xc46fffff]
[ 0.310497] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.310499] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.310502] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.310505] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcaffffff]
[ 0.310508] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.310512] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.310515] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.310521] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
[ 0.310526] pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.310533] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.310536] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.310542] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
[ 0.310546] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.310554] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.310557] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.310563] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.310568] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
[ 0.310576] pci 0000:07:00.0: BAR 6: assigned [mem 0xf8420000-0xf842ffff pref]
[ 0.310578] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
[ 0.310581] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.310587] pci 0000:00:1c.4: bridge window [mem 0xc4200000-0xc46fffff]
[ 0.310592] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf84fffff 64bit pref]
[ 0.310600] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 0.310606] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.310656] pci 0000:00:1e.0: setting latency timer to 64
[ 0.310660] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.310662] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.310664] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310666] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.310668] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.310670] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.310672] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.310674] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.310676] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.310677] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xcaffffff]
[ 0.310679] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.310682] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.310684] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc3ffffff]
[ 0.310686] pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.310688] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.310689] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf3ffffff]
[ 0.310691] pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.310694] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.310695] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.310697] pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
[ 0.310700] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
[ 0.310701] pci_bus 0000:07: resource 1 [mem 0xc4200000-0xc46fffff]
[ 0.310703] pci_bus 0000:07: resource 2 [mem 0xf8400000-0xf84fffff 64bit pref]
[ 0.310706] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
[ 0.310708] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 0.310710] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 0.310712] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310713] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.310715] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.310717] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.310719] pci_bus 0000:08: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.310721] pci_bus 0000:08: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.310755] NET: Registered protocol family 2
[ 0.310880] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.311982] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.316195] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.316791] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.316793] TCP reno registered
[ 0.316803] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.316846] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.316995] NET: Registered protocol family 1
[ 0.317267] pci 0000:01:00.0: Boot video device
[ 0.317481] PCI: CLS 64 bytes, default 64
[ 0.317536] Unpacking initramfs...
[ 0.374501] Freeing initrd memory: 2884k freed
[ 0.375594] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.375597] Placing 64MB software IO TLB between ffff8800bbeca000 - ffff8800bfeca000
[ 0.375598] software IO TLB at phys 0xbbeca000 - 0xbfeca000
[ 0.375610] Simple Boot Flag at 0x36 set to 0x1
[ 0.376082] audit: initializing netlink socket (disabled)
[ 0.376096] type=2000 audit(1335390677.373:1): initialized
[ 0.376634] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.378819] VFS: Disk quotas dquot_6.5.2
[ 0.378870] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.378959] msgmni has been set to 7909
[ 0.379145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.379175] io scheduler noop registered
[ 0.379177] io scheduler deadline registered
[ 0.379231] io scheduler cfq registered (default)
[ 0.379359] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.379463] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.379588] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.379715] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.379842] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.379986] vesafb: mode is 1440x900x32, linelength=5760, pages=0
[ 0.379988] vesafb: scrolling: redraw
[ 0.379990] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.380871] vesafb: framebuffer at 0xc9000000, mapped to 0xffffc90011100000, using 5120k, total 5120k
[ 0.459332] Console: switching to colour frame buffer device 180x56
[ 0.537533] fb0: VESA VGA frame buffer device
[ 0.537543] intel_idle: MWAIT substates: 0x3122220
[ 0.537545] intel_idle: does not run on family 6 model 23
[ 0.537589] GHES: HEST is not enabled!
[ 0.537656] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.538109] Linux agpgart interface v0.103
[ 0.538184] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.549069] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.549174] mousedev: PS/2 mouse device common for all mice
[ 0.551979] rtc_cmos 00:07: RTC can wake from S4
[ 0.552091] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.552123] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.552132] cpuidle: using governor ladder
[ 0.552134] cpuidle: using governor menu
[ 0.552324] TCP cubic registered
[ 0.552326] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.552329] NET: Registered protocol family 17
[ 0.552341] Registering the dns_resolver key type
[ 0.552449] PM: Hibernation image not present or could not be loaded.
[ 0.552454] registered taskstats version 1
[ 0.560521] rtc_cmos 00:07: setting system clock to 2012-04-25 21:51:18 UTC (1335390678)
[ 0.560570] Initializing network drop monitor service
[ 0.565560] Freeing unused kernel memory: 732k freed
[ 0.565880] Write protecting the kernel read-only data: 8192k
[ 0.570360] Freeing unused kernel memory: 1632k freed
[ 0.572877] Freeing unused kernel memory: 656k freed
[ 0.579734] udevd[38]: starting version 182
[ 0.593304] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.607088] usbcore: registered new interface driver usbfs
[ 0.607172] usbcore: registered new interface driver hub
[ 0.608132] usbcore: registered new device driver usb
[ 0.608499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.608564] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.608568] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.608591] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.608626] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.612504] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.612523] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8304800
[ 0.614670] SCSI subsystem initialized
[ 0.616861] libata version 3.00 loaded.
[ 0.617667] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.620033] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.620307] hub 1-0:1.0: USB hub found
[ 0.620312] hub 1-0:1.0: 4 ports detected
[ 0.620479] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.620483] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.620496] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.620528] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.624409] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.624427] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8304c00
[ 0.633354] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.633512] hub 2-0:1.0: USB hub found
[ 0.633516] hub 2-0:1.0: 6 ports detected
[ 0.633616] ata_piix 0000:00:1f.1: version 2.13
[ 0.633651] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.634377] scsi0 : ata_piix
[ 0.635315] scsi1 : ata_piix
[ 0.635744] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.635747] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.635809] uhci_hcd

Answer 1

hi all,
I was able to fax and get a connection now. My next question is, in the network preference I see the internal modem red dot showing it's configured but not connected. Shouldn't it be green or does it matter? Your input will greatly be appreciated.
Web dude