Touchpad on and off

When I undock my PC the touchpad doesn't work. There is an amber colored light in the upper lefthand corner of the touch pad that is on, but the toouch pad won't work. How do I get it to work?

Hi, The amber light indicates that the touchpad is turned off. Try double-tapping the top left corner of the touchpad as this is the usual method to toggle the pad on/off. Regards, DP-K

Similar Messages

How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

JasonFromSK wrote:
With the newest Airport firmware (7.6.1), it seems I should be able to do this.
Really? I need to check that out!
You should certainly be able to add content by reference to itunes from such a disk (even before the update) - so long as itunes knows the location of the file (set Preferences not to copy to local library when adding the media) it will stream it to AppleTV if the disk is available.
I hope you're right, but I'd be surprised if current Extremes can be upgarded to provide a full Home Sharing service - marvellous if they can but I'd be surprised as i've long said we need an Apple media server either based on TC or AE to do this kind of thing.
AC

My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?

My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?

Try switching it back from landscape to vertical. Or, go to settings and see if you have any special setting turned on that enable only landscape view. Also, try hooking it up to your computer and charging it to see what happens.

Computer shuts on and off some corrupted files - no virues now

Listed below are some of the errors I found on event log in the laptop:
I have a Qosimo 8 megs of memory, windows 7 64 bit. Running AVAST 7.0 antivirus and Malwarebytes - both paid subscriptions. I think the model number is 830 530 I bought in 2009.
The shutdown problem has
been happening on and off for the last six months. I had two major instances of trojans taking over my machine and it caused constant shutdowns. AVAST worked with me on one and they had me use malwarebytes and spybot and hijack this. They took over my computer to get it up and running properly, but this new round of errors a trojan was found in the registry key and the startuptoolbar. Two nights ago I had another shut down several times and after running malwarebytes and antivirus I could find no errors so I’m leaning toward corrupted files? Is there anyway to fix these files without having to reformat the hard drive?
I did run a computer repair and a computer memory repair tonight using F8 and no problems were found by the computer. I’m not sure what to do with these errors in event viewer.. I get the toshiba error
quite often and it madely stops me from going online with my internet connection, and I had downloaded a newer version but same problem – I use windows repair in network and the error is always resetting the toshiba network IP. I just put a note into toshiba on that problem.
I also use microsoft silverlight for my fenderfuse application which needs that software operate properly. I’m not sure exactly what to do with that Custom dynamic link libraries are being loaded for every application. It states to check libraries – but what am I checking for? I do not have a lot of programs on the laptop but not sure what to look for in library?
Windows logs under Application
The description for Event ID 0 from source Ipod service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event
The description for Event ID 0 from source SignInAssistant cannot be found. Either the component
That raises this event is not installed on your computer or the installation is corrupted. You can
Install or repair the component on the local computer.
If the event originated on another computer, the information had to be saved with the event. The following information was included with the event:
WLD InitializationTimerQueue. QueueWorkItem Started
The win logon notification subscriber <sessionEnv> was unavailable to handle anotification event.
The description for Event ID0 from source IViRegMgr cannot be found.
Same for AdobeARMservice
Same for User Profile Service
Critical events
System has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, rashed or lost power inexpertly.
Administrative
Events
Unloading the performance counter strings for service WmiApRpt failed. The first DWORD n the data section contains the error code.
The performance strings in the performance registry value is corrupted when process Performance extension counter provider. The BaseIndex value from the Performance Registry is the first DWORD in the Data section, LastCounter value is the second DWORD in the Data Section, and LastHelp value is the third DWORD in the data section.
Several warnings on Toshiba Servicer Station. Error checking dependency (1df917db-3056-41a-bbac-0489a6b63d4dj: Unable to retrieve registry value.
Toshiba Service Station - skipping empty element (tsu:setup_args) (several errors on this one)
( I also installed the latest Toshiba service station and it did not fix the error problems in events log. When I did a restore it was before softare update this was added so now my computer is working properly with windows on connecting to the internet wireless.)
Unloading the performance counter strings for service WmiApRpl (wmiaprpl) failed. The first Dword in the Data section contains the error code.
Failed extract of third-party root list from auto update cab at: www.download.windowsupdate.com/msdownload/udate/v3/static/trustedr/en/authrooststi.cab> with error: A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.
Biggie? Custom dynamic link libraries are being loaded for every application. The system administration should review the list of libraries to ensure they are related to trusted applications.
Audit events have been dropped by the transport. 0
The system has rebooted without cleanly shutting down first. Kernel-power - this has happened several times.
The performance strings in the Performance registry value is corrupted when process Performance extension counter provided. The BaseIndex value from the Performance registry is the first DWORD in the data section, last counter value is the second DWORD in the Data section, and LastHelp value is the third DWORD in the data section.
Sometimes my computer shuts down often on its own and I find a Trojan - other times it shuts down often during a start up and I find no viruses as was the case yesterday. Today I did not get on the internet and the computer worked fine.
I guess I need to know if there is a way to reinstall the corrupted files without having to go back to the default settings when I got the computer. Does toshiba have a windows repair disc that works better then what I did with using F8 and having a system repair and memory check done that found no errors? I also installed the latest Toshiba service station and it did not fix the error problems in events log. When I did a restore it was before this was added so now my computer is working properly with windows on connecting to the internet wireless.
Malwarebytes said that by looking at these event viewer logs that it does not appear that I have a virus now but I do have corrupted files and can toshiba help me in getting them fixed. I really hate to do a complete reformat.
Thanks
Rose
Solved!
Go to Solution.

Event Viewer 5/14 events
Window logs
Application –
Information - Software protection service has stopped
Error – Unloading the performance counter strings for service wmiaprpl failed. The first Dword in the data section contains the error code
The performance strings in the performance registry value is corrupted when process Performance ext
The winlogon notification subscriber <SessionEnv> was unavailable tohandle a notification events
Error – Your computer was not assigned an address from the network (by the DHCP) Service) for the Network Card with network address0x701A043A07AE. Your computer willcontinue to try and obtain an address on its own from the network address (DHCP ) server.
Failed extract of third-party root list from auto update cab CAPI2
Warning – customer dynamic link libraries are being loaded for every application. The system Administrator should review the list of libraries to ensure they are related to Trusted Aplications.
The performance strings in the Performance registry value is corrupted when process Performance extension counter provider. The baseindex value from the performance registry is the first Dword in the data section, etc. – this error shows up often for today 5/14 (on line the aqnswer to this error is -
Performance counters are collected and used by services and applications. If they are installed incorrectly or with improper permissions, performance counters cannot be loaded, and services or applications cannot collect or interpret the data.
I noticed that software protection stopped and then it showed software protection working. I did not get any critical stop errors like I did before but that is because I don’t have any Trojans or viruses. I ran a full scan with both Avast and Malwarebytes yesterday and no problems.
Under system for today I see
The multimedia Class Scheduler Service entered the stopped state.
The application experienced service entered the stopped state
Under application Window logs for today
Fault bucket 130885241, type 5 Event Name PNDriverimportError response: not available
This is a warning error:
Windows detected your registry file is still in use by other applications or services . The file will be unloaded now. The applicationsor services that your registry file may not function properly afterwards.
10 user registry handles leaked from \Registry\User\(this section covered several registry problems I sent the note online and this is what they state: Cause this behavior occurs because the windows operating system automatically closes any registry handle to a user profie that is left open in an application. User Action – this is a warning event the application that is listed in the event detail is leaving the registry hand open, and it should be investigated.
I don't know how serious this probems are - I didn't like seeing the software security being stopped. But then it started up. I have copied everything personal on this laptop so I am ready to reformat if needed.
I still have the problem about IE not opening links unless I right button click to open it. I also had to make a separate ID to run Fender Fuse software as this computer was not recognizing the USB slot where I connect the amp to the laptop. Fender had me set up another id with minimum items and then I was able to connect to the amp and make changes.
Rose

Check boxes that turn layers on and off

hay all
im fairly new to this part of adobe but i have a good understanding
what i need i to be able to have check boxes that turn layers on and off when the tick is shown and when it is not
i know this is possible through scripting but i dont have the ability as of yet to carry out the scripting
is someone able to write a basic script for me or help me to understand what i need
i want the script to be for when a check box is clicked (mouse up) that a layer that was oringaly turned off to be turned on (electricalplan)
once the tick is removed i need the layer to turn off again
i need to do this for mulitple layers (about 10)
so i would just use the same script for each replacing the name with the correct name.
i also need the check boxes to work together so that i can have multiple turned on at the one time (electricalplan) (sewerplan) (waterplan)

Do you know how to access fields with JavaScript? I access the script way of the check box properties and selecting the actions tab.
Do you know how to set the optional value for a check box? Yes
Can more than one layer be displayed at a time? Yes
Do you want to toggle the OCG by name or element number in the OCG array? I would like to toggle by name

24" imac with second display that flickers on and off randomly

Hi, I'm a n00b here, I've read a handful of threads before posting this a I cant seem to find a definitive answer.
I have a 24" 2.4Ghz aluminium iMac and I've recently purchased a HP zr24w 24" IPS panel as a second display, connected with an apple miniDVI - DVI connector.
The screen flickers off, to totaly black every time the mac seems to be having a hard time doing something, be it fast scrolling, flash video, but someimes randomly.
I have boot camp installed with winblows vista (for work) the screen does EXACTLY the same thing, all be it less frequently. This for me rules out the Mac OS, i think it must be something video card/driver related.
Was there ever a fix for this? most of the threads seem to just die with no official answer, it would appear that MBP users were ok until the last 10.6.3 update, when the problem seems to have returned, although i think thats a different issue with the same net effect.
I have spoken to apple care and the very helpful girl I spoke to send me some logging software which I've run and sent the logs back, that may help them out someway.
Any help would be GREAT !!
many thanks
Michael

well, some time has passed, here's where I'm at so far.
I tried a friend's samsung 24" screen and all was good with the world, no flickering on and off, no black outs nothing, for days it was all fine. I swapped the HP monitor back on and it went right back to its old ways. I called HP tech support, they decided that the monitor was faulty, i returned it to where I got it from and they have sent me a new one. Which was fine, for about 7 hours!!
So, to recap, the mini-DVI to DVI adapter is fine as it worked on the samsung screen, the HP screen is brand new and exhibiting the exact same issue as the first one (cant be 2 faulty ones surely) The samsung screen was fine.
This leads me to think that there is some compatibility issue between the 24" imac and this particular (hp zr24w) monitor.
I have followed apple support's requests for data logging but they cant find anything wrong there.
I'm out of ideas, any help would be GREATLY appreciated !!!
thanks
Michael

I am trying to download a variety of files and when it is finished, the Mac freezes up and the task bar continues to blink on and off. I have to go into Firefox and actually quit the application to continue. Any help is very much appreciated

I am trying to download a variety of files and when it is finished, the Mac freezes up and the task bar continue to blink on and off.
I have to go into Firefox and actually quit the application to continue. Any help is very much appreciated.

are you backing up files, or doing a Time machine backup, either way, the Time machine will STOP when finished and show "last backup at XXXXXX" meaning its done...... OR if when transferring files, it will show a progress bar on your desktop and vanish when files are copied.
Open up the Hitachi drive (your G drive is made by Hitachi, and the best made by the way).....and see if the files are there.
a MORE VISUAL way is to open the hard drive file, and drag and drop files INTO the Gdrive and you can see them visually be copied there as you do it.
To see your HD on your desktop GOTO FINDER......PREFERENCES....then GENERAL TAB.........check the box marked HARD DRIVES.........then your Gdrive will appear on your desktop........open it from there, and DRAG and drop files from anywhere INTO the Gdrive....... easy visual way to see the files being copied into the Gdrive.

HT4061 I can't use my ipad mini. All buttons are frozen including the on and off, can't even find the serial number, can't see it on the back, can't find it under settings because no buttons will work. Has anyone encountered a similar problem?

My ipad mini is frozen and won't allow me to use any buttons. I can't access settings to get the serial number for Apple Support and I can't read the serial number from the back. It's too small and shadowy. There is a message that reads "ICloud Backup--This ipad hasn't been backed up in 2 weeks. Back ups happen when this ipad is plugged in,locked, and connected to Wi-Fi."
It won't allow me to shut if off using the on and off button. I stuck a paper clip into the tiny reset button, but nothing happens.
Has anyone else had this problem? Please help,
Vmcalpin

This is the most common "fix" when devices are behaving strangely. It only takes a minute and there's no risk of lost data. This is the reason you'll see this fix being suggested so often.

Time Capsule HDD keeps cycling on and off while my Mac is sleeping

Hi guys, I'm in a bit of a hurry so just gonna post dot points:
• My Time Capsule's HDD keeps cycling on and off continuously and potentially doing heaps of damage to it's drive when my MacBook is sleeping.
• Time Machine is set to automatically backup to my time capsule.
• As soon as I wake up and log into my MacBook it seems to stop. I checked the time capsule icon immediately and it says "Preparing backup" so I assume it was stuck in that phrase.
• I assume it backs up normally after waking up
MacBook Pro Retina:
• I usually never put my MacBook to sleep by closing the screen, so can't say if this happens when it's in closed screen sleep vs open screened sleep
• I'm not sure if there's any difference between close screen sleep and open screen sleep
• It is set to go to sleep automatically after 45mins of inactivity
• My iTunes Library is stored off-device on a 2TB HDD connected to the Time Capsule
Cheers,
Tony

How old is the TC and on what firmware?
You have put Mountain Lion for OS.. is that still the case or upgraded to Mavericks??
There has been some issues at various times with disk spinning up ..
This thread might give you some clues.
https://discussions.apple.com/thread/4148904?start=0&tstart=0
Is the computer set to power nap? Try turning that off.
Try unplugging the external drive with itunes library and see if that helps.
If it is TM the attempts to start the backup should be in the log.
See A1 pondini troubleshooting.
http://pondini.org/TM/Troubleshooting.html
Power nap.. try unplugging the laptop from power.
http://support.apple.com/kb/ht5394

When I try to open my iTunes on my iPhone 4S it shuts off right away. Ho do I fix this? I have already turned my phone on and off a bunch of times

Every time I try to open my iTunes app on my iphone 4 s it opens but then shuts down right away. I have already turned my phone on and off and did the reset thing by pushing the home and sleep button together and I hooked up my phone to my computers to update and none of these have worked. What works? Does anyone know? Thanks

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

HT201401 last night my iphone screen all of a sudden was solid blue and now it is black. I put it on the charger and this morning it is totally black. However, I did hear the text message signal go off. When I turned the volume on and off a big white bel

Last night my iphone screen all of a sudden was solid blue and now it is black. I tried turning it on and off. Still nothing appeared on the screen. I put it on the charger and this morning it is totally black. However, when I hit the on and off button, I did hear the text message signal go off. When I turned the volume on and off a big white bell flashed. In the last week, there were some other display problems such as the screen blowing up large. The only way to fix it was to turn off the phone and then turn it back on.
What does all of this mean? It seems like I've had these problems since the iphone 4 upgrade.

just do reset, press home button and power butoon for a while untill you can see apple
gud luck

How do i fix my issue: Apple Logo flashes on and off after iphone battery died during IOS update?

I've tried the methods I've seen on youtube and other iphone tech help sites but I am still having the same problem. Today while updating to IOS 7 my iphone 4 battery died and I didnt have a charger, now that I am home an I put in on the charger I notice the apple logo just flashes on and off. I've tried to restores using the DFU mode with the home and power button but that only seem to stop the logo from flashing and even then the iphone still isnt recognised by the pc to restore, Is there any other way i can go about fixing this problem!!!!

You can try the steps recommended in the User Guide. If they don't work bring your phone into Apple for evaluation.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

How to use a slider to turn on and off lights

Hi guys. i am fairly familiar with Labview now but cant seen to get my head around this problem. i have a slider which is numbered from 1 to 10. below the slider i inserted 10 LED lights. my aim sis to use the slider to turn on and off the lights. for an exmaple, when i set the slider to one, the light on the far left should go on. when i set the slider to 2, the first light should go on and the second light next to it should go on, and the pattern continues. i thought of using the number to array boolean but it didnt seem to do the trick. could you please help me out. i have attached the basic layout of how i wanted the objects to be arranged
kind regards
joe
Solved!
Go to Solution.
Attachments:
led control.vi ‏7 KB

wow! simplicity at its best! thats really straight forward to understand. i think you are right about making complicated circuits. the reason why i had asked to know how to do this was because i wanted to learn how to control motor directions using a slider. so after i thought i had got the easiest way of giving out 2 different outputs using a slider, i replaced the lights with switches that changed the direction of the motor. i successfully did this for the first motor and it rotated fairly well, but wanted to control 4 in total. so i simply copied and pasted the code and re-asigned the switches to different motors. when i did this, the results did work BUT the motors went very very slow. the movement was not steady and kept skipping. i think this its due to the coding being overly complicated thefore causing a serious lag. if you could please have a look
kind regards
joe
Attachments:
controling test.vi ‏29 KB

How to Set Automatic to turn on and off at specified time my TV with STB

It seems very frustrating talking with Verizon tech support, that's why I turn to you guys to find if anyone knows the answer to my question above.,from my experience calling verizon for my tech support regarding fiosTV and most of my experience from Verizon are either inept and giving the customer the run around by keeping you on hold for the longest and not having the answer after all the time I spend with the tech on the phone or they will tell you that the that there is no such thing; and when you call again when you get another tech on the phone you get completely different answer if not an inept answer.
My Specific question is, if I turned off my STB (top box) and my TV at a particular time; and I like my TV with STB to turn on at a specified time ( example I turned off my STB and TV at 9:00 PM ) and would like my TV with the STB to be turn on like 11:00 PM to turn off at 12:00 midnight by itself, not to record but just to turn on as reminder and to serve as power saver incase I fall asleep ( this is just example scenario). How would I do that? The manual of either remote control or the STB does not provide that information. My television manual say the TV can but I can not turn it on automatically with the STB connected.
I called Verizon tech, he first sounded inept and sounded like he just talking from a scripted lines, and would not tell me straight forward that he does not know the answer; I explained that I switched to Verizon Fios for its claim in high and advance technology as they compare themselves by far higher in technology as compared with Cable or direct TV, and with Cable Vision I was able to used the above automatic turn on and off with the remote; I asked for his supervisor or maybe more expert tech support, He turned over the call to his supervisor, who told me that the STB or the remote Fios TV does not have that level of capability which sounded to me like a joke, he also told me that the STB can not be turn on and off because STB is always set as on; I told him I can see the green light turns on and off on the STB each time I press the ON button on the Verizon Remote; he defended that its always on because the timer is ON, and he told me instead FIOSTV has another feature that although it will not turn the feature on and off automatically, it will serve as reminder, I asked him How to carry out that function, the tech supervisor said to me to just press the record button on my remote, which I know right away that it will just record, and I told him that its not what I want to accomplish, this Tech Supervisor insisted that it will not record but will set to notify me, but surely it did record and it just wasted and used my DVR memory capacity the time when he put me on hold for a long period of time, I knew it recorded because the red button on the STB/TVR was on., and it did not notify me in anyway what time the TV and STB will turn on. That was a complete waste of time, instead of him getting the issue to higher level of their tech support and try to research thru and get back to the client. To me, simple feature as this, is such absurd to claim that fiosTV has more advance features than others, where infact they can not even have their tech support answer such simple question.
Any one here has any idea, please help.

The set top box does not offer any auto on or auto off feature.
you can only do that if your TV offers the feature.
If neither your TV nor the STB offer that feature (in this case the stb does not offer) then you can go to a radio shack or a similiar store and purchase a AC timer. they make them and you plug them into your wall, they are very cheap.
I have had directv and fios and neither of my systems did an automatic on or off.
BUT my samsung TV upstairs does have that feature (auto on and off) and I have not checked my mitsubishi downstairs.
so you may want to check your settings on your TV to see if it will do it, like my samsung does.

HT4061 found old iphone 4. want to use it for wifi. But it wont let me into my iphone. it says activation required and then plug into itunes, then as soon as I plug it into itunes it flashes the apple logo on and off and wont be detected on itunes.

found olf iphone 4 or 4s in the back of my parents closet. They told me I could now have it back and its been a year since the last time I saw it. It wont turn on unless it is plugged up to a wall plug in. But as soon as I turn it on it says activation required then it says plug into itunes. After I try doing that it plugs into my computer but flashes the apple logo on and off. It wont even turn on all the way when plugged into computer...only the wall. ANY IDEAS?): and no I didnt steal/find this phone. It is mine. I dont have the guts to steal but a lot of people online have accused me.

You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427

Touchpad on and off

Similar Messages

Maybe you are looking for