Touchpad only working after reboot
Hello everyone,
I have not so recently switched to Arch on my Lenovo Thinkpad Twist S230U. Everythink is working pretty good or I have at least solutions I can happily live with so far.
One issue that is bugging me is the fact, that after a complete shutdown and boot neither the touchpad nor the trackpoint are working. If I just do a quick reboot, everything works great.
Another thing I noticed is that on the boots where the touchpad does not work, when I type in my password, the first keypress is not recognized sometimes.
The system is up to date and I just did a bios update, as it occured to me, I haven't done that since the purchase of the laptop. This did not change anything.
I have put up with this problem for quite some time now and just ignored it because I mostly suspend my laptop and never have problems after resuming, always hoping I would be surprised by a working touchpad one day after a kernel update.
The output of xinput after a "failing" boot:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Atmel Atmel maXTouch Digitizer id=9 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Integrated Camera id=10 [slave keyboard (3)]
↳ ThinkPad Extra Buttons id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
The output of xinput after a "successful" boot:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
⎜ ↳ TPPS/2 IBM TrackPoint id=14 [slave pointer (2)]
⎜ ↳ Atmel Atmel maXTouch Digitizer id=9 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Integrated Camera id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
↳ ThinkPad Extra Buttons id=13 [slave keyboard (3)]
The output of dmesg after a "failing" boot:
http://pastebin.com/jXzegW52
The output of dmesg after a "successful" boot:
http://pastebin.com/5DwreMVQ
Greetings
Felix
Last edited by Lurchwart (2015-05-18 09:57:45)
OK, problem solved
I just run arch in runlevel 1 and replace in file /etc/X11/xorg.conf.d/10-synaptics.conf option MatchIsTouchpad "off" MatchIsTouchpad "on".
Now everyhing working, but I still don't know how disable touchpad
OK, everything is good now SOLVED
Last edited by xorgx3 (2012-03-28 12:07:21)
Similar Messages
-
External keyboard only works after reboot with Port Replicator III Plus
The problem is that when I boot the notebook, the external PS/2 keyboard doesn't work. When I reboot the keyboard flips on and then I can use it.
This problem occurs on a Toshiba Tecra notebook with a Advanced Port Replicator III Plus. I've used several keyboards, so that isn't the problem. I've changed a value in the bios which is used for USB devices (mouse/keyboard). I disabled the option, because I use a PS/2 mouse and keyboard, but the problem isn't solved. I hope someone has an answer to this problem.Hello
I presume that there is something wrong with docking procedure and touchpad. Try to disable the Touchpad while the Notebook is docked.
Try also to install mobile extensions again. -
USB external audio only works after reboot
I have a EMU 0202 USB soundcard in order to be able to hear sound in my late 2008 macbook (because the mini-jack from the headphones broke inside the laptop. but this is another story). The problem is that in order for the laptop to detect this soundcard I have to reboot OSX. If I disconnect the soundcard and connect it again, it won't be detected until I reboot my computer again. Thing is I'm tired of rebooting so often just to have sound. Do you have any idea on why is my Macbook only able to detect the soundcard when booting or how could I fix this?
Thanks in advance.I see the latest driver is from 2008 (http://www.emu.com/support/files/download3.asp?Centric=1005&Platform=2&File=596), and is supporting Leopard. Perhaps the driver is not fully compliant with Snow Leopard...? Try uninstalling your driver, and installing the one mentioned, and if that does not work, try contacting EMU.
Kind regards:
Espen. -
Passcode lock only works after reboot
After a reboot I am prompted for the passcode. After that I never get prompted again - even though passcode lock is set to on, This is happening after I had to restore my iPhone from 4 months ago due to the Beta IOS (that I had taken back in July) had expired, leaving me no other option.
Other than resetting to factory settings what else is there?Sorry, my require passcode had been reset to 15 minutes. Problem resolved after changing to immediately.
-
Add-ons for android Firefox stop working after reboot
I have Firefox (ver. 21.0) installed on my Ramos W30 tablet running ICS (4.0.4) and my UG007 android stick running JB (4.1.1). They both have the same problem. After a reboot, the add-ons stop working. If you look at the add-ons, all the info which would show below "options" is gone. The only way I've been able to get them working again is to uninstall and reinstall the add-ons.
Any other way to fix this or prevent this from happening?I only use 2 add-ons and it happens with both. I use adblock and tabstothefront. They both stop working after reboot.
-
Viewing print thumbnail only works after a TAB in adobe reader X
Hello,
Viewing print thumbnail only works after a TAB in adobe reader x.
In adobe reader 9 when you go to a specified page (the red circle in the screenshot), the example on the right site directly go´s to that page,
In adobe reader x when you go to a specified page nothing happend in the example, when you then use the TAB then de example wil go to the specified page.
Is this a incident in Adobe Reader X ?
On myPDF files have to be specially enabled for you to save the contents. It appears the old version of these files had this capability, but the new version does not. Without Acrobat you will be unable to save the files. If these are truly government files, you can try going to the government's website and see if you can download a copy that will allow you to save the form field data.
-
Firefox only works after I re-boot my computer
I just got a new computer last week. It is running Windows 8 - 64 bit. I installed Firefox, used it for a week, set up my bookmarks, etc. and it worked fine. The other day when I logged in and opened Firefox, I couldn't click on anything - nothing would happen - it was like it was frozen. I went into Internet Explorer and also into Google Chrome and they both worked fine - I could click on things and it would do what it was supposed to do. So, I re-booted my computer and then Firefox worked fine. Same thing the next day, Firefox only worked after I re-booted my computer...and also today, same thing. Why is it frozen when I first go into it, but if I re-boot the whole computer, it works? Has me baffled. Any help would be appreciated, because it is my favorite browser. But if this keeps up, I won't be using it anymore. Thank you!
I have my home page set to Yahoo, so that's where it goes when I open it. When I get there, I can't click on my e-mail, nothing in the toolbar, it's totally frozen.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
:[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
Wireless only works after "iwlist wlan0 scan"
I just managed to get wireless working on my laptop, but it does not start on boot.
I have made a network-profile and referred to it from rc.conf.
It just gives a timeout error when booting, and the same if I try to start it with netcfg. But if I run "iwlist wlan0 scan" first and then netcfg its running fine.
Can anyone help me fix this?
Is something missing when booting?iphitus wrote:FightRight: It should still work after rebooting, did you upgrade your kernel or change anything else? Was netcfg2 updated? in which case, you'd need to uncomment it again.
Hi James
I have upgrade my Kernel and the netcfg2 scripts but there is still the same problem. Maybe i should uninstall all of these things and reinstall it again.
The mysterious thing is if i reboot my system i get an error "Wireless assosiation failed". If i open a term and repeat often the commend /etc/rc.d/net-profiles restart sometimes it helps to get a connection. But then i have to set the default route to gateway.
You see it is all a little bit crazy on my machine.:rolleyes:
Regards
Markus -
Adobe Connect Session only works after 5:00 pm
I have a bizzare situation where my adobe connect session only works after 5:00 pm. I have two other users who tried this and the session just hangs and then there is an error . But when both of us try after 5:00 it works fine. We are using IE 8.0. Also this will work fine in firefox at any time of the day. We have to roll this out to 2,000 users and need to get this working during the day.
Thanks
Aurangzeb NisarSo there is a troubleshooting error that occurse.
Then I go through the adobe connect test results and it fails at adobe connection test.
So here is more details:
Now I can get it to work when I use the content outside the Saba LMS that I am using.
But when I use it through the LMS then I get an connect error.
"Adobe connect connection test" Unable to connect . This only happens through IE 8.0
When using firefox through Saba LMS it works fine. -
Time Machine backups only work after restart
Hi
Getting frustrated as Time Machine backups only work after a restart. Work for a few hours and then get stuck with Backing up: XXMB of XXGB. I have left it on this for many hours ie overnight without completion
I have a Mid 2014 MBP 13 in running 10.10.2
I backup onto an external USB via a hub.
Things I have tried with review of Pondini great site which has helped with different TM backup problems.
Disk permissions and repair of SSD on MBP (were errors but did not solve issue)
Direct USB connection
Backup via Airport Extreme
Re-index spotlight
Reformat USB disk
New USB disk!
Below is log (backupd filtered) of latest backup attempts including final completed occuring after restart.
Any help gratefully received
19/03/2015 12:59:07.730 pm
com.apple.prefs.backup.remoteservice[2916]
Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
19/03/2015 12:59:10.238 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) Unknown key for Boolean: ForceEnableHack
19/03/2015 12:59:10.240 pm
UserEventAgent[16]
com.apple.backupd-auto launchd job enabled
19/03/2015 12:59:10.238 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 12:59:10.239 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
19/03/2015 12:59:23.162 pm
com.apple.backupd[2929]
Starting manual backup
19/03/2015 12:59:23.358 pm
com.apple.backupd[2929]
Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
19/03/2015 1:01:55.000 pm
kernel[0]
process backupd[2929] thread 893245 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
19/03/2015 1:12:00.297 pm
com.apple.backupd[2929]
Will copy (Zero KB) from Macintosh HD
19/03/2015 1:12:00.350 pm
com.apple.backupd[2929]
Found 221479 files (439.9 MB) needing backup
19/03/2015 1:12:01.050 pm
com.apple.backupd[2929]
2.33 GB required (including padding), 554.92 GB available
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
19/03/2015 1:21:51.062 pm
com.apple.backupd[167]
Starting manual backup
19/03/2015 1:21:51.380 pm
com.apple.backupd[167]
Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
19/03/2015 1:24:40.000 pm
kernel[0]
process backupd[167] thread 7580 caught burning CPU! It used more than 50% CPU (Actual recent usage: 53%) over 180 seconds. thread lifetime cpu usage 90.616005 seconds, (29.940993 user, 60.675012 system) ledger info: balance: 90000913400 credit: 90000913400 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 169146762635
19/03/2015 1:24:40.821 pm
spindump[507]
Saved cpu_resource.diag report for backupd version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2015-03-19-132440_David-Henshaw-Work-Ma cbook.cpu_resource.diag
19/03/2015 1:34:29.100 pm
com.apple.backupd[167]
Will copy (Zero KB) from Macintosh HD
19/03/2015 1:34:29.155 pm
com.apple.backupd[167]
Found 221268 files (493.5 MB) needing backup
19/03/2015 1:34:29.235 pm
com.apple.backupd[167]
2.39 GB required (including padding), 554.92 GB available
19/03/2015 1:35:57.393 pm
com.apple.backupd[167]
Copied 5145 items (486.8 MB) from volume Macintosh HD. Linked 21319.
19/03/2015 1:36:33.451 pm
com.apple.backupd[167]
Created new backup: 2015-03-19-133632
19/03/2015 1:36:39.933 pm
com.apple.backupd[167]
Starting post-backup thinning
19/03/2015 1:36:39.943 pm
com.apple.backupd[167]
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/2AC908D9-122D-4267-9652-74A9DC6C8795
19/03/2015 1:36:39.944 pm
com.apple.backupd[167]
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/A01A1A4C-F424-4F99-9466-6A5F571CE4F5
19/03/2015 1:36:53.268 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-125436 (10.4 MB)
19/03/2015 1:37:05.844 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-115428 (20.6 MB)
19/03/2015 1:37:12.476 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-102131 (1.5 MB)
19/03/2015 1:37:12.476 pm
com.apple.backupd[167]
Post-backup thinning complete: 3 expired backups removed
19/03/2015 1:37:12.495 pm
com.apple.backupd[167]
Backup completed successfully.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1295 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 450 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n ...and %s more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0; };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Accordion menu only working after refreshing
Hi,
I created my menu by putting module menu version2 code: {module_menu, version="2", menuId="5475", moduleTemplateGroup="Prodcut Menu"} in a page template. It created the correct format of menu I want:
<div id="ProductMenu">
<ul id="ProductMenuList" class="clearfix">
<li class="ProductOne">
<a href="/Products/productone">ProductOne</a> <ul class="clearfix">
<li class="subProductOne1">
<li class="subProductOne2">
<li class="subProductOne3"> <li class="subProductOne4">
</ul>
</li>
<li class="ProductTwo">
<a href="/Products/productone">ProductTwo</a>
<ul class="clearfix">
<li class="subProductTwo1"> <li class="subProductTwo2"> <li class="subProductTwo3"> <li class="subProductTwo4"> </ul>
</li>
</ul>
</div>
I need to make it an accordion menu. So I used jquery ui. But the accordion menu only works after I refresh the page. Here are the scripts I have at the head of the page template:
<link href="styles/jquery-ui.css" rel="stylesheet" />
<script src="javascripts/jquery-1.8.3.js"></script>
<script src="javascripts/jquery-ui.js"></script>
<script>$(function() {$( "#ProductMenuList" ).accordion();});
</script>
The link path works absolutely fine and the menu works at localhost. I also tried creating an external js for the script, and also put it at the end of body. But no luck. Could the code: {module_menu, version="2", menuId="5475", moduleTemplateGroup="Prodcut Menu"} be the reason that makes the script called before page content is created? Any ideas?http://ppdecom.businesscatalyst.com/products
Thx -
Multi-Touch Touchpad only works with Apple apps?
Hi, I was wondering if the touch gesture on the touchpad only works with Apple apps. I can not get the 3 finger swipe to work on Firefox but it works on Safari. Do you guys know if there is a way to get around this problem?
I can not get the 3 finger swipe to work on Firefox but it works on Safari.
Another reasons to go with Safari as your main Browser. It has ever improving performance too. Firefox is a bit out of date imo now (The Mozilla Foundation is actually going through beta testing and development of an improved browser), so offers little apart from customization of its appearance, not a factor ahead of Safari either imo since it has a neat professional appearance. -
Button get_url only worked after the first loop
Hi all,
I created a new layer, draw a rectangle, converted it to button, made its alpha to 0 and then added a snippet to go to the url. But when it played, the action only worked after the first loop had finished. It didn't work at the beginning.
Somebody save me
Thanksyour button must exist when your code executes.
-
Touchpad not working after suspend/resume on Asus R409LD
Hello,
I have installed Arch on my Asus laptop and I had issues with the FocalTech touchpad being detected as a generic mouse. This problem is now fixed in the mainline kernel which I use (cf https://wiki.archlinux.org/index.php/AS … #Touch_Pad).
However I still have a problem : when I suspend/resume my laptop, the touchpad ceases working.
Here is the output of xinput before suspending :
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ FocalTechPS/2 FocalTech FocalTech Touchpad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ USB Camera id=10 [slave keyboard (3)]
↳ Asus WMI hotkeys id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
I tried deactivating and reactivating psmouse but it doesn't work.
Wierdly, the touchpad is still listed by xinput after resuming, but doesn't work. And when I disable/enable psmouse it disappears from the output.
Here is a full dmseg with suspend/resume if it may help :
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-1-mainline (auguste@hal) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Mar 14 14:53:37 CET 2015
[ 0.000000] Command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba85b000-0x00000000c98b4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xba86a018-0xba877e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ba85b000-0x00000000ba86a017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba86a018-0x00000000ba877e57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba877e58-0x00000000c98b4fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xc9e93000 ACPI 2.0=0xc9e93000 SMBIOS=0xcaf46318
[ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem05: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e39000) (14MB)
[ 0.000000] efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e39000-0x000000007fc02000) (2013MB)
[ 0.000000] efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007fc02000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem10: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000080000000-0x00000000b687a000) (872MB)
[ 0.000000] efi: mem11: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b687a000-0x00000000b697a000) (1MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b697a000-0x00000000b7f44000) (21MB)
[ 0.000000] efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7f44000-0x00000000b7f45000) (0MB)
[ 0.000000] efi: mem14: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000b7f45000-0x00000000b9d7e000) (30MB)
[ 0.000000] efi: mem15: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000b9d7e000-0x00000000b9d85000) (0MB)
[ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b9d85000-0x00000000b9ed9000) (1MB)
[ 0.000000] efi: mem17: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000b9ed9000-0x00000000ba59b000) (6MB)
[ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba59b000-0x00000000ba5b8000) (0MB)
[ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000ba5b8000-0x00000000ba5d2000) (0MB)
[ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba5d2000-0x00000000ba5db000) (0MB)
[ 0.000000] efi: mem21: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000ba5db000-0x00000000ba85b000) (2MB)
[ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba85b000-0x00000000ba86a000) (0MB)
[ 0.000000] efi: mem23: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba86a000-0x00000000ba879000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba879000-0x00000000c72f8000) (202MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c72f8000-0x00000000c735c000) (0MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c735c000-0x00000000c7375000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c7375000-0x00000000c7395000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c7395000-0x00000000c73a5000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c73a5000-0x00000000c74af000) (1MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c74af000-0x00000000c74b0000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c74b0000-0x00000000c8c37000) (23MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c8c37000-0x00000000c95f3000) (9MB)
[ 0.000000] efi: mem33: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000c95f3000-0x00000000c98b5000) (2MB)
[ 0.000000] efi: mem34: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c98b5000-0x00000000c9a55000) (1MB)
[ 0.000000] efi: mem35: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c9a55000-0x00000000c9aca000) (0MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c9aca000-0x00000000c9e0f000) (3MB)
[ 0.000000] efi: mem37: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000c9e0f000-0x00000000caad9000) (12MB)
[ 0.000000] efi: mem38: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caad9000-0x00000000caaf9000) (0MB)
[ 0.000000] efi: mem39: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caaf9000-0x00000000caafd000) (0MB)
[ 0.000000] efi: mem40: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caafd000-0x00000000cab00000) (0MB)
[ 0.000000] efi: mem41: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000cab00000-0x00000000cab1d000) (0MB)
[ 0.000000] efi: mem42: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cab1d000-0x00000000cae70000) (3MB)
[ 0.000000] efi: mem43: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cae70000-0x00000000caea7000) (0MB)
[ 0.000000] efi: mem44: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea7000-0x00000000caea9000) (0MB)
[ 0.000000] efi: mem45: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea9000-0x00000000caf48000) (0MB)
[ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf48000-0x00000000caf6c000) (0MB)
[ 0.000000] efi: mem47: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf6c000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x00000001af200000) (2802MB)
[ 0.000000] efi: mem50: [Reserved |RUN| | | | | | | | ] range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem51: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem52: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem53: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem54: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem56: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. X450LD/X450LD, BIOS X450LD.208 06/11/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1af200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0180000000 mask 7FC0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CBC00000 mask 7FFFC00000 uncachable
[ 0.000000] 7 base 01B0000000 mask 7FF0000000 uncachable
[ 0.000000] 8 base 01AF800000 mask 7FFF800000 uncachable
[ 0.000000] 9 base 01AF400000 mask 7FFFC00000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1af000000-0x1af1fffff]
[ 0.000000] [mem 0x1af000000-0x1af1fffff] page 2M
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1a0000000-0x1aeffffff]
[ 0.000000] [mem 0x1a0000000-0x1aeffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x19fffffff]
[ 0.000000] [mem 0x180000000-0x19fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9d7dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb9bfffff] page 2M
[ 0.000000] [mem 0xb9c00000-0xb9d7dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9d85000-0xba5dafff]
[ 0.000000] [mem 0xb9d85000-0xb9dfffff] page 4k
[ 0.000000] [mem 0xb9e00000-0xba3fffff] page 2M
[ 0.000000] [mem 0xba400000-0xba5dafff] page 4k
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xba85b000-0xc98b4fff]
[ 0.000000] [mem 0xba85b000-0xba9fffff] page 4k
[ 0.000000] [mem 0xbaa00000-0xc97fffff] page 2M
[ 0.000000] [mem 0xc9800000-0xc98b4fff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc9aca000-0xc9e0efff]
[ 0.000000] [mem 0xc9aca000-0xc9bfffff] page 4k
[ 0.000000] [mem 0xc9c00000-0xc9dfffff] page 2M
[ 0.000000] [mem 0xc9e00000-0xc9e0efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fc02000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C9E93000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C9E93090 0000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C9EA9800 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9E93258 0165A6 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CAB1BF80 000040
[ 0.000000] ACPI: APIC 0x00000000C9EA9910 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9EA9988 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000C9EA99D0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: LPIT 0x00000000C9EA9A98 000094 (v01 ALASKA 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EA9B30 000174 (v01 Intel zpoddult 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EA9CA8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EAA1E8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000C9EAACC0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000C9EAAD00 00306D (v01 DptfTa DptfTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: HPET 0x00000000C9EADD70 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EADDA8 000298 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EAE040 003EE7 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EB1F28 000CA1 (v01 SgRef SgPch 00001000 INTL 20120711)
[ 0.000000] ACPI: BGRT 0x00000000C9EB2BD0 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: SSDT 0x00000000C9EB2C08 001480 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MSDM 0x00000000C9AC7E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af1fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1af1f5000-0x1af1f8fff]
[ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a8800000-ffff8801ae7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001af1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9d7dfff]
[ 0.000000] node 0: [mem 0x00000000b9d85000-0x00000000ba5dafff]
[ 0.000000] node 0: [mem 0x00000000ba85b000-0x00000000c98b4fff]
[ 0.000000] node 0: [mem 0x00000000c9aca000-0x00000000c9e0efff]
[ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001af1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001af1fffff]
[ 0.000000] On node 0 totalpages: 1542928
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12838 pages used for memmap
[ 0.000000] DMA32 zone: 821620 pages, LIFO batch:31
[ 0.000000] Normal zone: 11208 pages used for memmap
[ 0.000000] Normal zone: 717312 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9d7e000-0xb9d84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba5db000-0xba85afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba86a000-0xba86afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba877000-0xba877fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc98b5000-0xc9ac9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e0f000-0xcab1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcab1d000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8801aee00000 s87128 r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s87128 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1518797
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
[ 0.000000] ACPI: _OSI method disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5953756K/6171712K available (5573K kernel code, 893K rwdata, 1788K rodata, 1168K init, 1156K bss, 217956K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 2394.353 MHz processor
[ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.23 BogoMIPS (lpj=7981176)
[ 0.000044] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20150204
[ 0.034560] ACPI: All ACPI Tables successfully acquired
[ 0.036629] Security Framework initialized
[ 0.036636] Yama: becoming mindful.
[ 0.037324] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039478] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040415] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040428] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040670] Initializing cgroup subsys blkio
[ 0.040674] Initializing cgroup subsys memory
[ 0.040681] Initializing cgroup subsys devices
[ 0.040684] Initializing cgroup subsys freezer
[ 0.040686] Initializing cgroup subsys net_cls
[ 0.040715] CPU: Physical Processor ID: 0
[ 0.040716] CPU: Processor Core ID: 0
[ 0.040721] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.040722] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.041941] mce: CPU supports 7 MCE banks
[ 0.041957] CPU0: Thermal monitoring enabled (TM1)
[ 0.041970] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.041972] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.042092] Freeing SMP alternatives memory: 20K (ffffffff81a05000 - ffffffff81a0a000)
[ 0.043116] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.044495] ftrace: allocating 21346 entries in 84 pages
[ 0.056747] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.089782] TSC deadline timer enabled
[ 0.089786] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
[ 0.089816] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.089843] ... version: 3
[ 0.089844] ... bit width: 48
[ 0.089845] ... generic registers: 4
[ 0.089847] ... value mask: 0000ffffffffffff
[ 0.089848] ... max period: 0000ffffffffffff
[ 0.089849] ... fixed-purpose events: 3
[ 0.089850] ... event mask: 000000070000000f
[ 0.109937] x86: Booting SMP configuration:
[ 0.109940] .... node #0, CPUs: #1
[ 0.122572] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.126042] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.129984] #2 #3
[ 0.165939] x86: Booted up 1 node, 4 CPUs
[ 0.165943] smpboot: Total of 4 processors activated (19162.94 BogoMIPS)
[ 0.170937] devtmpfs: initialized
[ 0.173870] PM: Registering ACPI NVS region [mem 0xb9d7e000-0xb9d84fff] (28672 bytes)
[ 0.173872] PM: Registering ACPI NVS region [mem 0xc9e0f000-0xcab1cfff] (13688832 bytes)
[ 0.174282] pinctrl core: initialized pinctrl subsystem
[ 0.174328] RTC time: 14:49:34, date: 03/14/15
[ 0.174468] NET: Registered protocol family 16
[ 0.187440] cpuidle: using governor ladder
[ 0.200788] cpuidle: using governor menu
[ 0.200839] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.200841] ACPI: bus type PCI registered
[ 0.200843] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.200934] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.200937] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.201048] PCI: Using configuration type 1 for base access
[ 0.214532] ACPI: Added _OSI(Module Device)
[ 0.214535] ACPI: Added _OSI(Processor Device)
[ 0.214536] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.214538] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218484] ACPI : EC: EC description table is found, configuring boot EC
[ 0.222593] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.234176] ACPI: Dynamic OEM Table Load:
[ 0.234185] ACPI: SSDT 0xFFFF8801A7134800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.235459] ACPI: Dynamic OEM Table Load:
[ 0.235467] ACPI: SSDT 0xFFFF8801A709A000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.236797] ACPI: Dynamic OEM Table Load:
[ 0.236803] ACPI: SSDT 0xFFFF8801A7114A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.238841] ACPI: Interpreter enabled
[ 0.238853] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.238863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.238892] ACPI: (supports S0 S3 S4 S5)
[ 0.238894] ACPI: Using IOAPIC for interrupt routing
[ 0.238931] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.240682] ACPI: Power Resource [PC05] (on)
[ 0.255005] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.255012] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.255033] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.255037] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.256966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.256974] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.257651] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.258130] PCI host bridge to bus 0000:00
[ 0.258134] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.258137] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.258139] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.258141] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.258143] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.258145] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.258147] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.258149] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.258151] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.258153] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.258155] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.258157] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.258159] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]
[ 0.258169] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.258303] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.258318] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.258327] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.258334] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.258456] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.258467] pci 0000:00:03.0: reg 0x10: [mem 0xf7a1c000-0xf7a1ffff 64bit]
[ 0.258597] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[ 0.258612] pci 0000:00:04.0: reg 0x10: [mem 0xf7a10000-0xf7a17fff 64bit]
[ 0.258761] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.258781] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.258849] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.258907] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.258954] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.258975] pci 0000:00:16.0: reg 0x10: [mem 0xf7a25000-0xf7a2501f 64bit]
[ 0.259046] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.259156] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.259173] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a18000-0xf7a1bfff 64bit]
[ 0.259250] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.259309] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.259353] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.259428] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.259489] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.259533] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.259611] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.259672] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.259717] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.259794] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.259855] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.259900] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.259977] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.260053] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.260107] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.260130] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a23000-0xf7a233ff]
[ 0.260231] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.260306] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.260356] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.260569] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.260586] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.260595] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.260603] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.260611] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.260619] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.260627] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a22000-0xf7a227ff]
[ 0.260670] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.260765] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.260781] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a21000-0xf7a210ff 64bit]
[ 0.260803] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.260996] acpiphp: Slot [1] registered
[ 0.261002] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.261103] pci 0000:02:00.0: [1969:10a1] type 00 class 0x020000
[ 0.261131] pci 0000:02:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
[ 0.261144] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.261271] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.261309] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.267583] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.267587] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.267591] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.269364] pci 0000:03:00.0: [1814:3290] type 00 class 0x028000
[ 0.269385] pci 0000:03:00.0: reg 0x10: [mem 0xf7810000-0xf781ffff]
[ 0.269534] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.269571] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.271295] pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100
[ 0.271315] pci 0000:03:00.1: reg 0x10: [mem 0xf7800000-0xf780ffff]
[ 0.271464] pci 0000:03:00.1: supports D1
[ 0.271466] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
[ 0.279635] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.279641] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.279744] pci 0000:04:00.0: [10de:1140] type 00 class 0x030200
[ 0.279769] pci 0000:04:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.279792] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279816] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.279831] pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 0.279847] pci 0000:04:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.279982] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.284661] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.284665] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.284668] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.284674] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.284707] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.285766] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.285822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285876] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285928] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285979] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286029] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286080] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286131] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286172] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.286178] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.286526] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.286627] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.286757] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.286760] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.286764] vgaarb: loaded
[ 0.286765] vgaarb: bridge control possible 0000:00:02.0
[ 0.286917] PCI: Using ACPI for IRQ routing
[ 0.288384] PCI: pci_cache_line_size set to 64 bytes
[ 0.288438] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.288440] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.288442] e820: reserve RAM buffer [mem 0xb9d7e000-0xbbffffff]
[ 0.288444] e820: reserve RAM buffer [mem 0xba5db000-0xbbffffff]
[ 0.288445] e820: reserve RAM buffer [mem 0xba86a018-0xbbffffff]
[ 0.288447] e820: reserve RAM buffer [mem 0xc98b5000-0xcbffffff]
[ 0.288449] e820: reserve RAM buffer [mem 0xc9e0f000-0xcbffffff]
[ 0.288451] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.288453] e820: reserve RAM buffer [mem 0x1af200000-0x1afffffff]
[ 0.288579] NetLabel: Initializing
[ 0.288580] NetLabel: domain hash size = 128
[ 0.288581] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.288596] NetLabel: unlabeled traffic allowed by default
[ 0.288627] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.288633] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.290662] Switched to clocksource hpet
[ 0.296419] pnp: PnP ACPI init
[ 0.296545] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.296549] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.296845] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.296848] system 00:01: [io 0xffff] has been reserved
[ 0.296850] system 00:01: [io 0xffff] has been reserved
[ 0.296852] system 00:01: [io 0xffff] has been reserved
[ 0.296854] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.296856] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.296859] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.296861] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.296863] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.296865] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.296868] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296905] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.296966] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.296969] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.297030] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.297033] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297073] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.297075] system 00:05: [io 0x0380-0x038f] has been reserved
[ 0.297077] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297149] pnp 00:06: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.297194] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.297753] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.297756] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.297759] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.297762] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.297765] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.297768] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.297771] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.297774] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.297777] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.297780] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.297783] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.297785] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.297789] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297888] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298113] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.298119] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.298320] pnp: PnP ACPI: found 10 devices
[ 0.304961] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.304974] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.304978] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.304983] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.304991] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.304996] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.305004] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.305007] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.305012] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.305016] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.305023] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.305026] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.305028] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.305030] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.305032] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.305034] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.305036] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.305038] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.305040] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.305042] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.305044] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.305046] pci_bus 0000:00: resource 15 [mem 0xcfe00000-0xfeafffff window]
[ 0.305049] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.305051] pci_bus 0000:02: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.305053] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.305055] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.305057] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.305059] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.305092] NET: Registered protocol family 2
[ 0.305327] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.305508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305650] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.305671] TCP: reno registered
[ 0.305686] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305719] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305779] NET: Registered protocol family 1
[ 0.305797] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.306052] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.306077] PCI: CLS 64 bytes, default 64
[ 0.306126] Unpacking initramfs...
[ 0.388937] Freeing initrd memory: 4088K (ffff88007fc02000 - ffff880080000000)
[ 0.388947] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.388951] software IO TLB [mem 0xc32f8000-0xc72f8000] (64MB) mapped at [ffff8800c32f8000-ffff8800c72f7fff]
[ 0.389171] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.389230] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389238] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389248] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389258] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389313] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.389343] Scanning for low memory corruption every 60 seconds
[ 0.389619] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.389637] Initialise system trusted keyring
[ 0.390008] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.391638] zpool: loaded
[ 0.391641] zbud: loaded
[ 0.391847] VFS: Disk quotas dquot_6.5.2
[ 0.391886] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392076] Key type big_key registered
[ 0.392275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.392313] io scheduler noop registered
[ 0.392316] io scheduler deadline registered
[ 0.392350] io scheduler cfq registered (default)
[ 0.393087] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.393092] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.393109] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.393111] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.393115] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.393130] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.393132] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.393134] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 0.393138] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.393154] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.393156] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.393160] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.393168] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393186] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393205] efifb: probing for efifb
[ 0.393226] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 4128k, total 4128k
[ 0.393228] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.393229] efifb: scrolling: redraw
[ 0.393231] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.396869] Console: switching to colour frame buffer device 170x48
[ 0.400357] fb0: EFI VGA frame buffer device
[ 0.400367] intel_idle: MWAIT substates: 0x11142120
[ 0.400369] intel_idle: v0.4 model 0x45
[ 0.400370] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.400674] GHES: HEST is not enabled!
[ 0.400759] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.401281] Linux agpgart interface v0.103
[ 0.401345] rtc_cmos 00:02: RTC can wake from S4
[ 0.401480] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.401510] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.401526] Intel P-state driver initializing.
[ 0.401679] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.402207] TCP: cubic registered
[ 0.402436] NET: Registered protocol family 10
[ 0.402861] NET: Registered protocol family 17
[ 0.403549] Loading compiled-in X.509 certificates
[ 0.403578] registered taskstats version 1
[ 0.404855] Magic number: 7:305:839
[ 0.405045] rtc_cmos 00:02: setting system clock to 2015-03-14 14:49:34 UTC (1426344574)
[ 0.405254] PM: Hibernation image not present or could not be loaded.
[ 0.405865] Freeing unused kernel memory: 1168K (ffffffff818e1000 - ffffffff81a05000)
[ 0.405869] Write protecting the kernel read-only data: 8192k
[ 0.406503] Freeing unused kernel memory: 560K (ffff880001574000 - ffff880001600000)
[ 0.406722] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 0.415600] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.428621] sdhci: Secure Digital Host Controller Interface driver
[ 0.428624] sdhci: Copyright(c) Pierre Ossman
[ 0.432810] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.434654] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.434686] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.438789] ACPI: bus type USB registered
[ 0.438822] usbcore: registered new interface driver usbfs
[ 0.438836] usbcore: registered new interface driver hub
[ 0.438866] usbcore: registered new device driver usb
[ 0.439456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.439732] ehci-pci: EHCI PCI platform driver
[ 0.439788] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.439796] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.439810] ehci-pci 0000:00:1d.0: debug port 2
[ 0.440689] SCSI subsystem initialized
[ 0.441807] libata version 3.00 loaded.
[ 0.443716] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.443738] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a23000
[ 0.450881] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.457612] hub 1-0:1.0: USB hub found
[ 0.457623] hub 1-0:1.0: 2 ports detected
[ 0.457875] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.457882] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.457958] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00003810
[ 0.457964] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.458152] hub 2-0:1.0: USB hub found
[ 0.458161] hub 2-0:1.0: 9 ports detected
[ 0.460386] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.460389] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.460507] hub 3-0:1.0: USB hub found
[ 0.460513] hub 3-0:1.0: 4 ports detected
[ 0.461400] ahci 0000:00:1f.2: version 3.0
[ 0.461544] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.474228] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.474234] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.474875] scsi host0: ahci
[ 0.475020] scsi host1: ahci
[ 0.475159] scsi host2: ahci
[ 0.475279] scsi host3: ahci
[ 0.475335] ata1: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22100 irq 45
[ 0.475337] ata2: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22180 irq 45
[ 0.475339] ata3: DUMMY
[ 0.475340] ata4: DUMMY
[ 0.483062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.764471] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.794476] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.797272] ata1.00: ATA-9: Corsair Force LX SSD, N0307A, max UDMA/133
[ 0.797277] ata1.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 0.797611] ata1.00: configured for UDMA/133
[ 0.797790] scsi 0:0:0:0: Direct-Access ATA Corsair Force LX 7A PQ: 0 ANSI: 5
[ 0.817843] usb 2-5: new high-speed USB device number 2 using xhci_hcd
[ 0.888974] hub 1-1:1.0: USB hub found
[ 0.889039] hub 1-1:1.0: 8 ports detected
[ 1.118072] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.121576] ata2.00: ATAPI: TSSTcorp CDDVDW SU-228FB, AS00, max UDMA/100
[ 1.126383] ata2.00: configured for UDMA/100
[ 1.134312] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-228FB AS00 PQ: 0 ANSI: 5
[ 1.145602] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.145650] sd 0:0:0:0: [sda] Write Protect is off
[ 1.145655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.145664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.149453] sda: sda1 sda2 sda3
[ 1.149802] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.159142] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.159146] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.159335] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.270792] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.332987] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.333146] systemd[1]: Detected architecture 'x86-64'.
[ 1.333579] systemd[1]: Set hostname to <hal>.
[ 1.390731] systemd[1]: Starting Login Prompts.
[ 1.390866] systemd[1]: Reached target Login Prompts.
[ 1.390892] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.391053] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.391068] systemd[1]: Expecting device dev-sda1.device...
[ 1.391131] systemd[1]: Starting Swap.
[ 1.391189] systemd[1]: Reached target Swap.
[ 1.391204] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.391237] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.391251] systemd[1]: Starting Root Slice.
[ 1.391516] systemd[1]: Created slice Root Slice.
[ 1.391530] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.391586] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[ 1.391660] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.391676] systemd[1]: Starting Journal Socket.
[ 1.391774] systemd[1]: Listening on Journal Socket.
[ 1.391804] systemd[1]: Starting User and Session Slice.
[ 1.391891] systemd[1]: Created slice User and Session Slice.
[ 1.391899] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.391955] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.391963] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.392014] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.392021] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.392076] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.392083] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.392142] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.404539] systemd[1]: Listening on Journal Audit Socket.
[ 1.404567] systemd[1]: Starting System Slice.
[ 1.404753] systemd[1]: Created slice System Slice.
[ 1.405170] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.405256] systemd[1]: Mounting Debug File System...
[ 1.405704] systemd[1]: Starting Setup Virtual Console...
[ 1.406206] systemd[1]: Starting Journal Service...
[ 1.406973] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.407431] systemd[1]: Starting system-getty.slice.
[ 1.407583] systemd[1]: Created slice system-getty.slice.
[ 1.407652] systemd[1]: Mounting Huge Pages File System...
[ 1.408243] systemd[1]: Started File System Check on Root Device.
[ 1.408275] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.408675] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.408786] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.408802] systemd[1]: Starting Encrypted Volumes.
[ 1.408843] systemd[1]: Reached target Encrypted Volumes.
[ 1.408860] systemd[1]: Starting udev Control Socket.
[ 1.408920] systemd[1]: Listening on udev Control Socket.
[ 1.409625] systemd[1]: Mounting Temporary Directory...
[ 1.410189] systemd[1]: Starting udev Kernel Socket.
[ 1.410267] systemd[1]: Listening on udev Kernel Socket.
[ 1.410296] systemd[1]: Starting udev Coldplug all Devices...
[ 1.411636] systemd[1]: Started Load Kernel Modules.
[ 1.411663] systemd[1]: Mounted FUSE Control File System.
[ 1.411711] systemd[1]: Mounting Configuration File System...
[ 1.412105] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.412517] systemd[1]: Starting Remote File Systems.
[ 1.412594] systemd[1]: Reached target Remote File Systems.
[ 1.412633] systemd[1]: Starting Apply Kernel Variables...
[ 1.413108] systemd[1]: Expecting device dev-sda3.device...
[ 1.413180] systemd[1]: Starting Slices.
[ 1.413242] systemd[1]: Reached target Slices.
[ 1.413268] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.413329] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.413348] systemd[1]: Starting Paths.
[ 1.413415] systemd[1]: Reached target Paths.
[ 1.413980] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.415449] systemd[1]: Started Setup Virtual Console.
[ 1.417502] systemd[1]: Mounted Configuration File System.
[ 1.417780] EXT4-fs (sda2): re-mounted. Opts: data=ordered,discard
[ 1.419393] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.420243] systemd[1]: Mounted Debug File System.
[ 1.420980] systemd[1]: Mounted Huge Pages File System.
[ 1.421670] systemd[1]: Mounted Temporary Directory.
[ 1.422842] systemd[1]: Started Remount Root and Kernel File Systems.
[ 1.431714] systemd[1]: Started Apply Kernel Variables.
[ 1.432536] systemd[1]: Started udev Coldplug all Devices.
[ 1.437198] systemd[1]: Starting Load/Save Random Seed...
[ 1.438791] systemd[1]: Started Rebuild Hardware Database.
[ 1.438826] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 1.438844] systemd[1]: Started First Boot Wizard.
[ 1.438860] systemd[1]: Started Create System Users.
[ 1.438917] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.443195] systemd[1]: Started Load/Save Random Seed.
[ 1.459454] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.460356] systemd[1]: Starting udev Kernel Device Manager...
[ 1.461282] systemd[1]: Starting Local File Systems (Pre).
[ 1.461977] systemd[1]: Reached target Local File Systems (Pre).
[ 1.531924] systemd[1]: Started udev Kernel Device Manager.
[ 1.553706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.556325] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.561234] ACPI: Lid Switch [LID]
[ 1.561319] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.561324] ACPI: Sleep Button [SLPB]
[ 1.561393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.561396] ACPI: Power Button [PWRF]
[ 1.580408] ACPI: AC Adapter [AC0] (on-line)
[ 1.606236] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.610817] [drm] Initialized drm 1.1.0 20060810
[ 1.647229] ACPI: Battery Slot [BAT0] (battery present)
[ 1.647475] wmi: Mapper loaded
[ 1.677123] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 1.677422] sound hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 1.677426] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.677429] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 1.677431] sound hdaudioC1D0: mono: mono_out=0x0
[ 1.677433] sound hdaudioC1D0: inputs:
[ 1.677436] sound hdaudioC1D0: Internal Mic=0x1a
[ 1.677439] sound hdaudioC1D0: Mic=0x19
[ 1.677929] thermal LNXTHERM:00: registered as thermal_zone2
[ 1.677933] ACPI: Thermal Zone [THRM] (42 C)
[ 1.678052] sound hdaudioC1D0: Enable sync_write for stable communication
[ 1.680963] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input5
[ 1.681093] [drm] Memory usable by graphics device = 2048M
[ 1.681097] checking generic (d0000000 408000) vs hw (d0000000 10000000)
[ 1.681099] fb: switching to inteldrmfb from EFI VGA
[ 1.681124] Console: switching to colour dummy device 80x25
[ 1.681211] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 1.681232] [drm] Replacing VGA console driver
[ 1.681254] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 1.686528] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 1.693423] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [78:24:af:6c:a3:75]
[ 1.701875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.701878] [drm] Driver supports precise vblank timestamp query.
[ 1.701979] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.709764] systemd[1]: Found device Corsair_Force_LX_SSD 3.
[ 1.710440] systemd[1]: Found device Corsair_Force_LX_SSD ESP.
[ 1.710484] systemd[1]: Mounting /boot...
[ 1.711777] systemd[1]: Starting File System Check on /dev/sda3...
[ 1.717424] iTCO_vendor_support: vendor-support=0
[ 1.717576] AVX2 version of gcm_enc/dec engaged.
[ 1.717578] AES CTR mode by8 optimization enabled
[ 1.717646] cfg80211: Calling CRDA to update world regulatory domain
[ 1.717946] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.717986] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.718109] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.718376] media: Linux media interface: v0.10
[ 1.727078] systemd[1]: Starting Sound Card.
[ 1.727130] systemd[1]: Reached target Sound Card.
[ 1.729262] asus_wmi: ASUS WMI generic driver loaded
[ 1.729427] Linux video capture interface: v2.00
[ 1.730834] asus_wmi: Initialization: 0x1
[ 1.730877] asus_wmi: BIOS WMI version: 7.9
[ 1.730930] asus_wmi: SFUN value: 0x4a0877
[ 1.731917] alx 0000:02:00.0 enp2s0: renamed from eth0
[ 1.732263] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
[ 1.748309] fbcon: inteldrmfb (fb0) is primary device
[ 1.751204] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.761392] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1.765545] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.772307] asus_wmi: Backlight controlled by ACPI video driver
[ 1.794652] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b4)
[ 1.797927] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0013 detected
[ 1.798396] intel_rapl: Found RAPL domain package
[ 1.798398] intel_rapl: Found RAPL domain core
[Still no ideas ?
-
MSI GS70 20D Touchpad not working after login when I upgraded to 8.1
Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.
Maybe you are looking for
-
How do I save an edited photo from an album in the same album?
How do I save an edited photo from an album in the same album in ipad?
-
Unable to receive gmail through apple's mail app 4.3 on Mac Book Pro
I am unable to receive gmail through apple's mail app 4.3, on my MacBook Pro although I can receive my email on the gmail web site. *I can send email through Mail with no problems I just can't receive any e-mail in Mail.* Recently I got a message tha
-
Inserting flv (video) in DW8 page
I want to insert some small video clips in a website (something akin to YouTube video clips in dimension, with playback controls). I've figured out how to create the video in Flash (Professional 8) and create the flv that I need to place in DW8. I'd
-
PHP and result sets: size and time
Hi I'm tasked with debugging and "fixing" a PHP application which (someone else developed) is running slowly and "timing out", now that data is in there. I set about inserting some brief timing "debug" stuff within the code to attempt to determine wh
-
Select query to find material# corresponding to particular value
Hello, I have an internal table which has a field called 'series' which is basically the the last five digits of mara-prdha. With the 'series' number in hand, i need to find the corresponding materials. Thus, need to write a select query to for all s