Touchpad problems ((and other Windows 10 issues)

I upgraded to Windows 10 pretty smoothly, but I'm experieiincing the same problems as others when it comes to using tablet mode etc. My biggest frustration though is that the touchpad no longer consistently supports two-finger scrolling, which is sooo frustrating. Also, edge-swipe gestures to bring up things like the app-switcher and charms bar (is it still called that?) don't work either. I've updated to the latest drivers (all of the ones that Lenovo has at ths point) and that doesn't seem to fix any problems. Anyone know how to solve the touchpad issues?  Also, seriously disapponted with the Lenovo support on these issues. The Yoga went from being one of my favorite laptops to being one of my least favorite with this OS "upgrade" and next time, I'll probably get a computer from Dell.

Hi, I too was experiencing simlar frustrations on my Flex 2-15" which uses a similar touchpad, the movement would even stop all together for about 15-20 secs, extremely frustrating!! Since my wireless mouse would work just fine I knew it had to be an issue with the drivers.  So the updated driver version for win 10 min my case is going from v17(win8) to v19+(win10). I noticed that the Device Manager driver was showing that new version but the Synaptics control panel was reading that the driver was still 17 which I could see might cause issues for the hardware input to be read properly.  Here is how I fixed it:  1) If you haven't already, download the windows 10 driver for your specific computer/ trackpad from this site.  2) Go to your device manager cpl and expand the pointer mouse objects and uninstall all of the drivers but DO NOT reboot immediately. 3) Goto the Programs and Features cpl and uninstall the Synaptics program (or ELAN / Alps depending on your stock controller app) 4) Reboot when prompted. 5) Run the download in step one and install the driver and Synaptics app when prompted     NOTE: In my case the Synaptics install would not open on its own and had to open it's setup.exe manually          <<C: drivers\Touchpad Driver(Elan, Synaptics, ALPS)\2al301af\Synaptics>> If you still have the issue, try running through the steps while disconnected from the internet. It might be auto-updating with the wrong data. I hope this helps those afflicted my this annyoing issue.~gC  

Similar Messages

  • OJSP classpath problems and other OJSP issues

    Hi,
    We are running into a number of OJSP problems. The technology stack we are using is :
    Apache 1.3.12
    Jserv 2.0
    Jswdk 1.0.1
    OJSP 1.0.0.6
    The issues we have are:
    1) The OJSP classpaths mechanism as described in the documentation does not work. In our configuration, globals.jsa resides under apache/htdocs. The WEB-INF directory also sits under apache/htdocs.
    It seems that OJSP completely ignores WEB-INF/lib. Any jars that the JSP may need have to be put on the servlet classpath (wrapper.classpath).
    OJSP will pick up modified beans from
    WEB-INF/classes but only for beans that
    use JDBC with thick drivers or for beans
    that don't use the JDBC driver at all.
    2) We got our application to work by moving everything that the JSPs may need to the servlet classpath. However, OJSP would hang when switching between various JSPs. Stopping apache in this case also caused the port to be held by some runaway process. We then had to start apache on a different port.
    So our questions are:
    1) Is OJSP going to support thin JDBC drivers?
    2) Are there other ways of getting bean reloading to work? Bouncing the server, everytime a bean changes is not a viable option for us.
    3) Are there any known issues with OJSP hanging when navigating from page to page?
    Thanks,
    Munazza

    Originally Posted by zdenca
    Hi, we got 2 node cluster Netware6.5SP8 or (OES) we lost the sbd partition and could not mount or start clustered volumes and could not recreate the sbd partition.
    So I have created a new cluster and was able to create sbd partition and mount the clustered partitions manually.
    But not we see 2 cluster objects in C1 the old one is complaining with the NDS sync for the GroupWise pool and master ip resource says new node under location.
    The new cluster objects see the servers properly but no cluster volumes and I cannot create any.
    Nssmu under both servers sees the clustered volumes properly. Check volume objects and trustees under Dsrepair sees only sys.
    So how do I make everything work under the new cluster?
    Help would be greatly appreciated.
    Thanks M.
    Well could not find the cluster forum :(
    Anyhow this is the fix: Deleted all old cluster objects from C1 recreated e-dir objects for clustered pools with nssmu which published the correct clustered info in C1, and allowed me to create new cluster volumes in C1, under the new cluster.
    But took me much longer than type these 3 lines:)
    Cheers.
    M.

  • S4LEAGUE AND OTHER GAMES ISSUE - INTERFERENCE WITH...

    Infinity is fine for other stuff except certain web games e.g.
    S4LEAGUE AND OTHER GAMES ISSUE - INTERFERENCE WITH SERVERS
    Issues
    Random disconnects
    slow connection
    slow client server
    Google searches suggest it might be a BT issue.
    Can you help, thanks

    using wired or wireless connection?
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I'm connected to the wifi at home but no internet access. i was surfing on the same wifi without any problems. and also this issue is for other wifi network.

    hello everyone.
    i was surfing browsing and downloading on my iphone 4 on my home wifi and other places without any problem but today i found out that even though i'm connected to my wifi i got no internet access. i also got this new problem, my led flash is on.  if i tilt the device the flas dims a bit. i tried switching off the device but still the flash is on. i tried using at other wifi network same problem. i tried forget this network, switching off and turning on the device i also tried reseting the network and also hard reseting the device. but still same problem. what can i do about this? and if i send it to apple what are my options? i got warrant coverage so will they be able to repair it ? if they are not able to repair then will they give me new iphone 4 or refurbished iphone 4 for replacement?

    Apple does not repair devices.  If they are covered under warranty, the device is replaced.  You will not get a new phone, you will get a service unit which is as good as if not better than new.
    If all the basic troubleshooting from the User's Guide has been done and the device does not get Internet access via Wi-Fi from multiple locations, the only thing left is to take it to Apple.

  • "screen shot can't be saved" and other permissions issues

    After having my iMac at the Apple Store for four days solving a problem with "quit unexpectedly" issues with all Apple built-in Apps on OS X Yosemite, I got the machine back with those problems solved.  It involved re-installing OS X and restore files from backup.  I thought all was well; the Genius Bar dude showed me that it's fixed. He said it took so long because of bizarre permissions issues he'd never seen before.
    Now that I've lugged this 40lb machine back home (after verifying the fixes in the store) I now find that several (other) functions don't work.  When I try to do a screenshot, I get this message:"Your screen shot can't be saved.  You don't have permission to save this file in the location where screen shots are stored."  Message could have been more helpful; the "location" is the desktop.  Pretty descriptive, though.  Seems I can't save anything to the desktop.
    I tried creatng a folder on the desktop.  Got this message: "Finder wants to make changes. Type your password to allow this".  Type password and new folder appears.  Drag the new folder to the trash, get same message..
    I tried copying a file from a network drive to the desktop. I get this dialog: "Modifying Desktop requires and administrator name and password.  I clicked "authenticate" and after a 3 minute delay (with "Preparing.." ) I get this dialog; "Finder wants to make changes.  Type your password to allow this".  I type the password and the file appeared on the desktop.  Before the work at the Apple Store, this never happened.  BTW I have only one user account and it's marked "Allow user to administer this computer".  Thinking something might be goofy with the pw, I changed it (took 3 minutes to do, oddly) and rebooted. No joy. Same thing happens when I try to drag something from the desktop to the trash.  Long time "moving" message followed by having to provide and admin pw.
    I tried to save a Safari attachment to the Downloads folder and got this message: "Safari could not download the file xxxxx because there is not enough free disk space".  Since I have more than 600GB of available space, I think the message is wrong and that it's really a permission issue with the Downloads folder.
    Tried to reset the password again.  Click to unlock the Users & Groups panel, get "System Preferences is trying to unlock Users & Groups preferences.  Type your password to allow this".
    All this tells me that somehow Yosemite is in "nag" mode (reminiscent of Windows Vista.
    Any ideas?
    Chaz

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Slow finder indexing, and other Mavericks issue

    Since downloading Mavericks i have two issues that have started to become annoying..
    When i open a finder window, or when trying to save something, the indexing takes ages. Was always instant in mountain lion..
    Also now if i right click an image for example that is an attatchment in mail it brings up the "open with" option but when i hover on it i just get "preview, colorsync and other"
    I used to get a list and always had the option of adobe photoshop cs6 ... i now have to click on other everyu time and search through my applications to find cs6. Is there no way of getting it back to a list of options?
    I am on an 21 inch iMac. 2.66 core 2 duo with 8 gb 1067 ddr3 memory... mid 2009 iMac if it makes any odds.

    @shashinka ;  I'm sorry I did not tell it before but I have maxed out memory RAM on my MacBook (I got 8 GB in total) well before Mavericsk and I also find that is not a memory related problem. Do not be sad and considers that having more memory is almost always a good thing in general (and that you can resell it too).
    Another thing i do not mention: I have the same problem on my other Mac ( iMac (21.5-inch Late 2009) ) that had maxed memory too ( 16GB there).
    The point is this "systemstas" hog process.
    Now I read 6 "I have this question too" : someone else want to add an articulated response ?
    I am a little surprised that I did not even have found a single person who does not agree with my post (or even just with my polemical tone). I begin to suspect that here, in the house of the Big Apple, no one is interested in listening to real stories about "customer dissatisfaction", that's simple something that "cant be".

  • 3D full screen and floating window issue

    hey everyone,
    since the new pdf viewer (adobe acrobat 10) released i've got an issue with the 3d fullscreen and the floating window.
    the first photo below shows the default view in a 3d scene. if i'm selecting the floating window (or the fullscreen) there is a problem with the camera (position, targetPosition and the behavior).so the view is wrong and the position of all nodes in it, and up to now i am unable to fix it
    Does anyone has this problem as well and can help me?
    cheers frank

    hi good morning,
    i was on holiday for 5 days now so sorry my late answer. I tried to set the default view in the u3d model but it doesn't work as well
    i loaded up a file that does not work in fullscreen as well as in the floating window (http://www.fileuploadx.de/76685).
    The javascript errors at startup were evoked, because i deleted some models that aren't needed but the javascript tries to load it. But they don't have any effect to the scene so far.
    In the floating window (or fullscreen) something with the camera must be wrong. I deleted the buttons (you can see as billboards in the scene) and then it works. So i tried to figure out the problem and let me displayed the position of the camera after each rendering event simple by (console.println(scene.cameras.getByIndex(0).position). Even if I displayed all cameras, that were about 50 surprisingly, it was the same overall. If the scene is embedded in the pdf document the camera position changed as it has to be. In the floating window and in the fullscreen i did not record any changes of the camera ...
    does anybody has an idea ?!
    cheers frank
    ps: please use adobe reader 10 to see that issue. with version 9 everythings should work fine.

  • Adobe Reader 10 - 3D fullscreen and floating window issue

    hey everyone,
    since the new pdf viewer (adobe acrobat 10) released i've got an issue with the 3d fullscreen and the floating window.
    the  first photo below shows the default view in a 3d scene. if i'm  selecting the floating window (or the fullscreen) there is a problem  with the camera (position, targetPosition and the behavior).so the view  is wrong and the position of all nodes in it, and up to now i am unable  to fix it
    Furthermore, as you see in picure three, the fullscreen mode of a 3d scene shows the whole page and many errors in the scene itself...
    Does anyone has this problem as well and can help me?
    cheers frank

    hi good morning,
    i was on holiday for 5 days now so sorry my late answer. I tried to set the default view in the u3d model but it doesn't work as well
    i loaded up a file that does not work in fullscreen as well as in the floating window (http://www.fileuploadx.de/76685).
    The javascript errors at startup were evoked, because i deleted some models that aren't needed but the javascript tries to load it. But they don't have any effect to the scene so far.
    In the floating window (or fullscreen) something with the camera must be wrong. I deleted the buttons (you can see as billboards in the scene) and then it works. So i tried to figure out the problem and let me displayed the position of the camera after each rendering event simple by (console.println(scene.cameras.getByIndex(0).position). Even if I displayed all cameras, that were about 50 surprisingly, it was the same overall. If the scene is embedded in the pdf document the camera position changed as it has to be. In the floating window and in the fullscreen i did not record any changes of the camera ...
    does anybody has an idea ?!
    cheers frank
    ps: please use adobe reader 10 to see that issue. with version 9 everythings should work fine.

  • PSE 11 editor has stopped importing from scanner, no longer permits drag and drop, will not permit cropping, and other bizarre issues

    Windows 8.1, PSE 11
    I am having a number of issues including loss of import functionality from scanner, I can't drag and drop photos into the editor any more as well, or at least not after the first one. The crop function stops working after the first couple of photos.  Then some freezing.  A little added crashing.  A plethora of other bizarre issues as well.  This just stated happening a couple of days ago. 
    What I have tried:
    Uninstall/Install. 
    Deleted preferences both before opening Editor (crontrol-alt-delete) and after opening it. 
    Kindly advise.  Thanks!
    Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
    Operating System: Windows 8 64-bit
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 8
    Processor speed: 3500 MHz
    Built-in memory: 8139 MB
    Free memory: 5185 MB
    Memory available to Photoshop Elements: 3255 MB
    Memory used by Photoshop Elements: 70 %
    Image tile size: 128K
    Image cache levels: 6
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1440, right: 2560
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTX 660 Ti
    Driver Version: 9.18.13.3750
    Driver Date: 20140327000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 2560 x 1440 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 660 Ti
    Video Card Memory: -2047 MB
    Application folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\
    Temporary file path: C:\Users\evan\AppData\Local\Temp\
    Photoshop Elements scratch has async I/O enabled
    Scratch volume(s):
      Startup, 931.2G, 805.4G free
    Required Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Required\
    Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins\
    Additional Plug-ins folder: not set
    Installed components:
       ACE.dll   ACE 2011/03/29-16:11:44   63.457850   63.457850
       adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
       AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0  
       AdobeOwl.dll   Adobe Owl 2012/06/20-18:39:56   4.1.9   78.509892
       AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
       AdobePDFL.dll   PDFL 2011/03/29-16:11:44   63.378681   63.378681
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2010/10/12-08:45:30   63.139439   63.139439
       AdobeXMPFiles.dll   Adobe XMP Files   5.0   61.134777
       adobe_caps.dll   Adobe CAPS   4,0,42,0  
       Adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.2.0.4 (BuildVersion: 2.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
       AGM.dll   AGM 2011/03/29-16:11:44   63.457850   63.457850
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   1.486530
       aif_ogl.dll   AIF   3.0   1.486530
       amtlib.dll   AMTLib   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
       amtservices.dll   AMTServices   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
       ARE.dll   ARE 2011/03/29-16:11:44   63.457850   63.457850
       asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1  
       AXE8SharedExpat.dll   AXE8SharedExpat   3.3   49.279053
       AXEDOMCore.dll   AXEDOMCore   3.3   49.279053
       AXSLE.dll   AXSLE   3.3   49.279053
       Bib.dll   BIB 2011/03/29-16:11:44   63.457850   63.457850
       BIBUtils.dll   BIBUtils 2011/03/29-16:11:44   63.457850   63.457850
       boost_threads.dll   DVA Product   5.0.0  
       cg.dll   NVIDIA Cg Runtime   2.0.0015  
       cgGL.dll   NVIDIA Cg Runtime   2.0.0015  
       CoolType.dll   CoolType 2011/03/29-16:11:44   63.457850   63.457850
       data_flow.dll   AIF   3.0   1.486530
       dvaadameve.dll   DVA Product   5.0.0  
       dvacore.dll   DVA Product   5.0.0  
       dvaui.dll   DVA Product   5.0.0  
       ems.dll   Elements Organizer   11.0  
       ExtendScript.dll   ExtendScript 2010/03/05-08:21:15   61.423205   61.423205
       FaceDetector.dll   FaceDetector 0000/00/00-00:00:00   2.0.1.1   2.0.1.1
       FileInfo.dll   Adobe XMP FileInfo   5.0   61.134777
       filter_graph.dll   AIF   3.0   1.486530
       hydra_filters.dll   AIF   3.0   1.486530
       icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       image_compiler.dll   AIF   3.0   1.486530
       image_flow.dll   AIF   3.0   1.486530
       image_runtime.dll   AIF   3.0   1.486530
       JP2KLib.dll   JP2KLib 2011/03/29-16:11:44   63.196876   63.196876
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       MPS.dll   MPS 2011/05/24-09:45:42   63.464027   63.464027
       MSVCP100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1  
       MSVCP71.dll   Microsoft® Visual Studio .NET   7.10.3077.0  
       MSVCR100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1  
       MSVCR71.dll   Microsoft® Visual Studio .NET   7.10.3052.4  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop Elements Editor   11.0  
       platform.DLL   Adobe Help System   1, 0, 0, 1  
       Plugin.dll   Adobe Photoshop Elements Editor   11.0  
       PSArt.dll   Adobe Photoshop Elements Editor   11.0  
       PSViews.dll   Adobe Photoshop Elements Editor   11.0  
       ScCore.dll   ScCore 2010/03/05-08:21:15   61.423205   61.423205
       shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300  
       Tbb.dll   Intel(R) Threading Building Blocks for Windows   2, 2, 2009, 1011  
       updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
       WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
    Required plug-ins:
       Accented Edges 12.0
       ADM 3.11x01
       Angled Strokes 12.0
       Auto Divide 11.0.0.0 (11.0 (20120830.r.32025))
       Average 12.0.2
       Bas Relief 12.0
       BMP 12.0.2
       Camera Raw 7.4
       Chalk & Charcoal 12.0
       Charcoal 12.0
       Chrome 12.0
       Clouds 12.0.2
       Color Halftone 12.0.2
       Color Variations 12.0.4 (12.0.4x001)
       Colored Pencil 12.0
       Comic NO VERSION
       CompuServe GIF 12.0.2
       Conté Crayon 12.0
       Correct Camera Distortion 12.0.2
       Craquelure 12.0
       Crop and Straighten Photos Filter 12.0.2
       Crosshatch 12.0
       Crystallize 12.0.2
       Cutout 12.0
       Dark Strokes 12.0
       Difference Clouds 12.0.2
       Diffuse Glow 12.0
       Displace 12.0.2
       Dry Brush 12.0
       Extrude 12.0.2
       FastCore Routines 12.0.4 (12.0.4x001)
       Fibers 12.0.2
       Film Grain 12.0
       Filter Gallery 12.0
       Fresco 12.0
       Glass 12.0
       Glowing Edges 12.0
       Grain 12.0
       Graphic Novel NO VERSION
       Graphic Pen 12.0
       Halftone Pattern 12.0
       Ink Outlines 12.0
       Lens Blur 12.0
       Lens Flare 12.0.2
       Lighting Effects 12.0.4 (12.0.4x001)
       Liquify 12.0.1
       Matlab Operation 12.0.4 (12.0.4x001)
       Mezzotint 12.0.2
       MMXCore Routines 12.0.4 (12.0.4x001)
       Mosaic Tiles 12.0
       Multiprocessor Support 12.0.4 (12.0.4x001)
       Neon Glow 12.0
       Note Paper 12.0
       Ocean Ripple 12.0
       OnEdge 1, 0, 0, 1
       Paint Daubs 12.0
       Palette Knife 12.0
       Patchwork 12.0
       Pen and Ink NO VERSION
       Photocopy 12.0
       Picture Package Filter 12.0.4 (12.0.4x001)
       Pinch 12.0.2
       Pixar 12.0.4 (12.0.4x001)
       Plaster 12.0
       Plastic Wrap 12.0
       PNG 12.0.2
       Pointillize 12.0.2
       Polar Coordinates 12.0.2
       Polar Coordinates 12.0.4 (12.0.4x001)
       Poster Edges 12.0
       Radial Blur 12.0.2
       Read Watermark 4.0
       Reticulation 12.0
       Ripple 12.0.2
       Rough Pastels 12.0
       Save for Web & Devices 12.0
       ScriptingSupport 12.0.4
       Shear 12.0.2
       Smart Blur 12.0.2
       Smudge Stick 12.0
       Solarize 12.0.2
       Spatter 12.0
       Spherize 12.0.2
       Sponge 12.0
       Sprayed Strokes 12.0
       Stained Glass 12.0
       Stamp 12.0
       Straighten and Crop Image 12.0.4 (12.0.4x001)
       Straighten Image 12.0.4 (12.0.4x001)
       Sumi-e 12.0
       Texture Fill 12.0.4 (12.0.4x001)
       TextureSelect 12.0.4 (12.0.4x001)
       Texturizer 12.0
       Tiles 12.0.2
       Torn Edges 12.0
       Twirl 12.0.2
       Underpainting 12.0
       Water Paper 12.0
       Watercolor 12.0
       Wave 12.0.2
       WIA Support 12.0.4 (12.0.4x001)
       Wind 12.0.2
       ZigZag 12.0.2
    Optional and third party plug-ins:
       Frame From Video 6.0
       Magic Extractor 12.0.4 (12.0.4x001)
       PhotomergeUI 12.0.4 (12.0.4x001)
    Plug-ins that failed to load: NONE
    Installed TWAIN devices: NONE

    Final Update: ...god willing...
    OK! Check it, like I said in previous posts I seemed to have narrowed it down to specific mp3s not converting and playing in their native sample rate which if paired with another sample would give you the "audio midi sync" error and basically screw up your clock! It appears mp3 files converting to mp3 using iTunes would not convert to the correct sample rate if set to something other than 44 in logic and cause this. A tad peculiar Apple iTunes won't work with Apple Logic. I was able to confirm this on two mac's via my friend in Florida. He's running Tiger and tried the same experiment and Booya! Mickey Mouse! It appears this insane week long adventure has came to an end (...god willing) with a super specific unlucky shot in the dark on my part finally revealed to be an perfectly normal function of Logic (obviously one i'm not fond of..) As far as the errors / crashes / system overloads / kernal panics I think I can sort those out to the mackie onyx satellite not being a good choice and trying to add and remove firewire devices in the middle of the sample rate mayhem. Wow! all I can say is, I'm glad it's over
    Wish me a lot of luck in the future.. I'm sure i'll need it!

  • N8 poor signal reception and other hardware issues...

    I have always been a Nokia fan . I started with Nokia 6600, then N70, then N82 and now a Nokia N8.
    However, I am facing the worst experience with N8 reception issues.
    The problems faced are as under :
    1) Poor Signal Reception Issues - Signal strength is weak and is constantly fluctuating compared to other Nokia Phones. At my workplace, if Nokia N82 displays 5 bars, N8 would display only 1 or 2 bars.
    2) Phone freezes many times. Whenever an Alarm is enabled, phone freezed much more.
    3) Purple Tint in the display. Nokia Service Centre says that its normal but according to me, they are just ignoring this issue. 
    4) Vibration is weak : I often do not realize when the phone is vibrating in my pocket !! 
    Upcoming Symbian Anna will just improve the user interface but will not be able to solve these hardware issues.
    If Nokia plans a hardware update facility for N8 users wherein they can fix the signal reception issues and increase the RAM to 1 GB atleast, I would retain this phone for few years.  
    But, now, I intend to switch to Samsung Galaxy S II. 
    Your views solicited.
    Regards
    MODERATOR'S NOTE: This post has been edited as we do not allow the discussion of speculations concerning products or services which have not been officially announced by Nokia.

    sats_24 wrote:
    I have always been a Nokia fan . I started with Nokia 6600, then N70, then N82 and now a Nokia N8.
    However, I am facing the worst experience with N8 reception issues.
    The problems faced are as under :
    1) Poor Signal Reception Issues - Signal strength is weak and is constantly fluctuating compared to other Nokia Phones. At my workplace, if Nokia N82 displays 5 bars, N8 would display only 1 or 2 bars.
    2) Phone freezes many times. Whenever an Alarm is enabled, phone freezed much more.
    3) Purple Tint in the display. Nokia Service Centre says that its normal but according to me, they are just ignoring this issue. 
    4) Vibration is weak : I often do not realize when the phone is vibrating in my pocket !! 
    Upcoming Symbian Anna will just improve the user interface but will not be able to solve these hardware issues.
    If Nokia plans a hardware update facility for N8 users wherein they can fix the signal reception issues and increase the RAM to 1 GB atleast, I would retain this phone for few years.  
    But, now, I intend to switch to Samsung Galaxy S II. 
    Your views solicited.
    Regards
    MODERATOR'S NOTE: This post has been edited as we do not allow the discussion of speculations concerning products or services which have not been officially announced by Nokia.
    I am agree with poor signal issue with nokia N8. I have two cell with one is N8 and other one is N26 with nearly 4.5 year old but at same place Nokia N8 showing very poor quality of network signal compared to N26. So for same network provider with two different cell with same manufacture how can drastic different that is also investing nearly RS.22000!
    Please resolve the issue ASAP.
    Regards,
    Praful

  • Recently I have not been able to post comments and other related issues.

    On some websites like Reddit.com I am usually no longer able to post in comment boxes. I can type my comment in the box, but hitting save clears the box and no comment is posted (oddly, i noticed that the comment ends up at the end of the url).
    Or use the cursor to click on up and down vote arrows. When I mouse over the arrow, it changes to a hand with pointed finger, but clicking the link does nothing.
    Or post photos.
    Normally I use Firefox 29.0.1 (which I have been using a long time and do not want to change). But the problems I mention here apply to both browsers, depending... on other things I cannot control or figure out. But at the moment, I can use links for comments etc. on IE8 (cannot update), but not on FF.
    I've asked Reddit help but so far nobody has replied (r/bugs and r/help).

    Sounds that you are blocking JavaScript.
    Do you have security software that might be blocking JavaScript?
    Just to be sure: Java and JavaScript are different languages.
    To avoid confusion, see:
    *http://kb.mozillazine.org/JavaScript_is_not_Java
    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
    *http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    *Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
    If you keep having problems then also create a new profile.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Embedding .WMV and other Windows Files on Wiki

    Hi everyone. We just moved to cross platform MacBooks for the project I manage. Teachers are creating videos and other things in Photoshop and Premiere on the Windows side. Obviously they can attach the video as an attachment, but is there any way to embed the videos in Snow Leopard Wiki Pages like you can do with Quicktime? Any plug ins or anything like that?
    Thanks!

    See if [messageID=9232112|http://discussions.apple.com/thread.jspa?messageID=9232112] and [messageID=11560901|http://discussions.apple.com/thread.jspa?messageID=11560901 ] helps with your quest, and see page 33ff in the [Wiki Deployment manual|http://images.apple.com/server/macosx/docs/WikiDeploymentv10.6.pdf] for the steps and for the formats.
    Files using the Microsoft Windows-specific WMV format will very likely need to be converted, and media format conversion tools are available.

  • Differences between 10G intallations for vista and other windows systems

    I need Informations about how the installationfiles for vista are differing from the files to install oracle on other windows systems.
    And why can't i simply install Oracle Database 10g release 2 (10.2) for Microsoft Windows on a Windows Vista System.
    Message was edited by:
    user585666

    Because Microsoft has changed the API with Vista - the system calls that programs such as Oracle (and Symantec, Word Perfect, and so on) use to performs their operations.
    It is a strange thing indeed that things stop working when a program (such as Oracle) asks "fetch me data from disk" and the operating system says "fetch has been changed to get and I no longer respond to fetch"
    Also because Microsoft has changed the security model, and requests made by Oracle are now denied due to insufficient, or differences in, security.
    An analogy - you have a device with a plug to use in North America. Why can you not simply plug it in to the wall socket in other countries?
    The information you need should probably come from Microsoft, not Oracle.

  • Issues with color panel and other windows on right side of flash

    Ok the issue I'm having with flash is that the windows on the right side of my flash window do not snap up when I collapse a window. I am attaching a screen shot to better explain this issue.
    As you can see I have the color panel collapsed up, when I expand this panel and it goes down everything shifts down. however when I collapse it back up a huge gap is left behind in CS5.5 as is displayed in screen shot number 2. In CS4 I never had this problem. I could expand and collapse panels as I saw fit with no problems what so ever. Everytime now that I expand a panel and collapse it, the library or other panels do not move up with the collapsing. This causes a workspace issue. and forces me to drag up the library via the black line that is just above it but below the align panel so that I have better access to my library or properties panel for when I'm working. I find this highly annoying and would like it if there could be a fix produced to make it so this collapsing issue can be fixed and I don't have to waste time dragging up the library/properties panel everytime I need to access stuff in my library when I have a huge list of graphics I'm going through.
    Thanks
    h_cline2

    I already tried that, first thing I thought of before coming to the forums for a solution.
    Thanks anyways.
    Any other ideas?

  • Nokia 500 Wi-Fi with problems (and other issues)

    Hi there.
    I had my Nokia 500 yesterday, but it seems to have several problems regarding wireless LAN. I usualy disable 3G traffic (WAP, GPRS, UMTS), so that my service provider doesn't charge me, and only enable with when necessary. But I want the phone to connect to known Wi-Fi networks when avaialable. However:
    1 - When I enable "Only WLAN" in my country, several phone applications constantly annoy me about "no avaialable connection", even when its connected to a Wi-Fi LAN!
    2 - Its constantly searching for wireless networks, and the Wi-Fi connection is intermitent. It fails and then it comes up all the time. I could not finish the download of a GPS map because the Wi-Fi would fail before the download could finish. And it only had 1 known Wi-Fi network avaialable.
    3 - So I set it to use only WLAN, I set  "WLAN energy saving" to off, "search networks" to "once in 30 minutes" (and not automatically), and Manual selecion of WLAN. Even like this, the WLAN connection sometimes fails, and then comes back!
    Also, I cannot install software directly from OVI Store using WLAN (error downloading), and the phone crashed several times while recognizing and focusing a face using the camara.
    I am trully disapointed with the phone. Does anyone have a solution for these problems?
    Thanks.

    You may want to check your battery and battery contacts. Make sure that a Centro battery has not been installed in this device as it is slightly smaller and will not maintain pressure on the battery contacts.
    You can try placing a piece or 2 of paper behind the battery to make to contacts tighter. A loose battery can cause most of the issue you are describing. 

Maybe you are looking for

  • Indesign Server CS5 crashes at launch

    Hi, Indesign Server 7.03 on OSX 10.5.8 Intel Xserve. When Indesign server CS5 is launched at boot (or with launchctl) it crashes with the following errror in the system log: Nov 20 13:32:00 ams1ps01 com.adobe.ids.launchd.8888[799]: /Applications/Adob

  • About OBIEE 11g Installation

    Hello all I want to install a OBIEE 11g i hv a question that does it require any dotnet framework?? Edited by: 916405 on 25-Apr-2012 00:01 Also i hv a question that RCU utility requires only if we hv 32 bit version or does it needs in 64 bit version

  • How do you add into a group a contact you added onto your i-phone?

    How do I put into a group a contact I added to my i-phone 6?

  • Keep-Alive Portlet

    Does anyone know of a keep-alive portlet that will keep the users session alive while they are on a specific page? My problem is that the users are getting logged off of the portal after 20 minutes of inactivity, so what I'd like to do is have a port

  • R12 PO Inspection vs. Quality Skip Lot

    We have been performing PO inspections without the Quality module for over 10 years. There is project to move many of our key suppliers to an Evaluated Receipt Settlement program. The accounting folks want to throw these suppliers into some sort of S