Touchpad Scroll Zooming not functioning

When pressing ctrl and using the scroll, it is supposed to zoom in and out. It seems to not function in different programs?! For example I use it fine in Firefox, but Photoshop, OneNote, Premiere and Sony Vegas it does not work. Very irritating.

Ctrl + and Ctrl - works fine for me in Firefox and Photoshop on my T400, X100e, and T60.
Do you have a US keyboard?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

My laptop touchpad scrolling is not working

Hi,
i am pritam,I am using hp15d017tu laptop,which came with free dos .I installed it to windows 8 pro but now the touchpad scrolling is not working.
these have not fixed my scroll at all.No other gesture are working either.The only I can do is point and click on by touchpad.
So,please help me.

Hi can u help me out with the serial and product number of the unit please

Touchpad scroll gestures not working in windows 10

Hello,I have a HP Envy laptop and my laptop's touchpad scrolling gestures are not working since I updated my windows operating system from windows 8.1 to windows 10. Please help me out!

Hi : Did your scroll setting stay after you rebooted? I gave the same advice yesterday (see post below) and the one guy said the setting gets erased on every reboot. http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/Synaptics-touchpad-doesn-t-scroll-after-Windows-10-upgrade/m-p/5173105#M126701 I could not say yea or nay because I rolled back my notebook to W7 due to the fact that it could no longer screen mirror to my smart TV (either the TV needs a software update, or W10 has a bug) and I can't remember if I had used the notebook scrolling feature again in W10 after I had turned it off.

Touchpad Scroll-buttons not working properly

Hello all,
I was not sure if this is actually a Desktop Environment or Hardware problem, but since it's hardware related I will post it here.
The problem:
On my touchpad (on Acer Aspire 5610Z) I have scroll button for up/down/left/right and until a recent update the scroll buttons need to be clicked repeatably in order to scroll. Before the upgrade and the way I'm expecting to behave is that when I click and hold a button - it should repeat the scroll (I hope you are able to understand it). So basically my problem is that to scroll with the scroll-buttons I have to click it numerous times in order to scroll, instead of just holding the button pressed.
At the same time all other features like two-finger scrolling, gestures etc. are working, but I'm not used to scroll with two fingers and would like to have my scroll-buttons working.
Here is some information about the configuration:
10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
Option "SHMConfig" "on"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertEdgeScroll" "on" # enable vertical scroll zone
Option "HorizEdgeScroll" "on" # enable horizontal scroll zone
Option "VertTwoFingerScroll" "on" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "on" # horizontal scroll anywhere with two fingers
EndSection
Output of synclient -l
Parameter settings:
LeftEdge = 1752
RightEdge = 5192
TopEdge = 1620
BottomEdge = 4236
FingerLow = 25
FingerHigh = 30
FingerPress = 256
MaxTapTime = 180
MaxTapMove = 221
MaxDoubleTapTime = 180
SingleTapTimeout = 180
ClickTime = 100
FastTaps = 0
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 282
EmulateTwoFingerMinW = 7
VertScrollDelta = 100
HorizScrollDelta = 100
VertEdgeScroll = 1
HorizEdgeScroll = 1
CornerCoasting = 1
VertTwoFingerScroll = 1
HorizTwoFingerScroll = 1
MinSpeed = 1.6
MaxSpeed = 1.75
AccelFactor = 0.087
TrackstickSpeed = 40
EdgeMotionMinZ = 30
EdgeMotionMaxZ = 160
EdgeMotionMinSpeed = 1
EdgeMotionMaxSpeed = 401
EdgeMotionUseAlways = 0
UpDownScrolling = 1
LeftRightScrolling = 1
UpDownScrollRepeat = 1
LeftRightScrollRepeat = 1
ScrollButtonRepeat = 100
TouchpadOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 0
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 1
TapButton2 = 2
TapButton3 = 3
ClickFinger1 = 1
ClickFinger2 = 1
ClickFinger3 = 1
CircularScrolling = 0
CircScrollDelta = 0.100007
CircScrollTrigger = 0
CircularPad = 0
PalmDetect = 0
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 20
CoastingFriction = 50
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
GrabEventDevice = 1
TapAndDragGesture = 1
AreaLeftEdge = 0
AreaRightEdge = 0
AreaTopEdge = 0
AreaBottomEdge = 0
HorizHysteresis = 25
VertHysteresis = 25
ClickPad = 0
Output of xinput list :
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ USB2.0 Camera id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
And the last upgrade since the scroll buttons stopped working:
[2012-03-14 08:15] upgraded chromium (17.0.963.78-1 -> 17.0.963.79-1)
[2012-03-14 08:15] > Updating desktop mime database...
[2012-03-14 08:15] upgraded eric (5.1.8-1 -> 5.2.0-1)
[2012-03-14 08:15] upgraded freetype2 (2.4.8-1 -> 2.4.9-1)
[2012-03-14 08:15] upgraded git (1.7.9.3-1 -> 1.7.9.4-1)
[2012-03-14 08:15] upgraded glproto (1.4.14-1 -> 1.4.15-1)
[2012-03-14 08:15] upgraded grep (2.11-1 -> 2.11-2)
[2012-03-14 08:15] upgraded gstreamer0.10 (0.10.35-1 -> 0.10.36-1)
[2012-03-14 08:15] upgraded gstreamer0.10-base (0.10.35-1 -> 0.10.36-1)
[2012-03-14 08:15] upgraded gstreamer0.10-base-plugins (0.10.35-1 -> 0.10.36-1)
[2012-03-14 08:15] upgraded gstreamer0.10-good (0.10.30-2 -> 0.10.31-1)
[2012-03-14 08:15] upgraded gstreamer0.10-good-plugins (0.10.30-2 -> 0.10.31-1)
[2012-03-14 08:15] upgraded xcb-proto (1.6-2 -> 1.7-2)
[2012-03-14 08:15] upgraded libxcb (1.7-2 -> 1.8.1-1)
[2012-03-14 08:15] upgraded libx11 (1.4.4-1 -> 1.4.99.1-1)
[2012-03-14 08:15] upgraded libxt (1.1.2-1 -> 1.1.2-2)
[2012-03-14 08:15] upgraded imagemagick (6.7.5.3-1 -> 6.7.6.0-1)
[2012-03-14 08:15] upgraded inputproto (2.0.2-1 -> 2.2-1)
[2012-03-14 08:15] upgraded libglapi (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:15] upgraded libgl (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:15] upgraded intel-dri (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded kdebase-runtime (4.8.1-1 -> 4.8.1-2)
[2012-03-14 08:16] upgraded khrplatform-devel (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded libegl (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded libgles (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] Users no longer need to be in the 'camera' group to use camera devices
[2012-03-14 08:16] upgraded libgphoto2 (2.4.11-1 -> 2.4.13-1)
[2012-03-14 08:16] upgraded libnids (1.24-1 -> 1.24-2)
[2012-03-14 08:16] upgraded libpciaccess (0.12.1-1 -> 0.13-1)
[2012-03-14 08:16] upgraded libtiff (4.0.0-1 -> 4.0.1-1)
[2012-03-14 08:16] upgraded libxft (2.3.0-1 -> 2.3.0-2)
[2012-03-14 08:16] upgraded libxi (1.4.5-1 -> 1.6.0-1)
[2012-03-14 08:16] upgraded man-pages (3.36-1 -> 3.37-1)
[2012-03-14 08:16] upgraded mesa (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded mpfr (3.1.0.p3-1 -> 3.1.0.p7-1)
[2012-03-14 08:16] upgraded oxygen-gtk2 (1.2.1-1 -> 1.2.2-1)
[2012-03-14 08:16] upgraded oxygen-gtk3 (1.0.1-1 -> 1.0.2-1)
[2012-03-14 08:16] upgraded poppler (0.18.3-2 -> 0.18.4-1)
[2012-03-14 08:16] upgraded poppler-glib (0.18.3-2 -> 0.18.4-1)
[2012-03-14 08:16] upgraded poppler-qt (0.18.3-2 -> 0.18.4-1)
[2012-03-14 08:16] upgraded python-configobj (4.7.2-3 -> 4.7.2-4)
[2012-03-14 08:16] upgraded python-pygments (1.4-5 -> 1.5-1)
[2012-03-14 08:16] upgraded python2-pygments (1.4-5 -> 1.5-1)
[2012-03-14 08:16] upgraded ruby (1.9.3_p125-1 -> 1.9.3_p125-2)
[2012-03-14 08:16] upgraded skype (2.2.0.35-2 -> 2.2.0.35-3)
[2012-03-14 08:16] upgraded xf86-input-evdev (2.6.0-4 -> 2.7.0-1)
[2012-03-14 08:16] upgraded xf86-input-synaptics (1.5.0-1 -> 1.5.99-0.2)
[2012-03-14 08:16] upgraded xf86-input-vmmouse (12.7.0-3 -> 12.8.0-1)
[2012-03-14 08:16] upgraded xf86-video-intel (2.17.0-2 -> 2.18.0-1)
[2012-03-14 08:16] upgraded xf86-video-vmware (11.1.0-1 -> 12.0.0-1)
[2012-03-14 08:16] upgraded xorg-server-common (1.11.4-1 -> 1.12.0-1)
[2012-03-14 08:16] upgraded xorg-server (1.11.4-1 -> 1.12.0-1)
[2012-03-14 08:16] upgraded xorg-xinput (1.5.3-2 -> 1.5.99.1-1)
[2012-03-14 10:51] Running 'pacman -S gimp-devel'
[2012-03-14 10:52] Running 'pacman -S extra/gimp-devel'
[2012-03-14 10:52] Running 'pacman -Syy'
[2012-03-14 10:52] synchronizing package lists
[2012-03-14 10:54] Running 'pacman -S extra/gimp-devel'
[2012-03-14 10:55] Updating font cache... done.
[2012-03-14 10:55] installed gsfonts (1.0.7pre44-3)
[2012-03-14 10:55] installed libwmf (0.2.8.4-9)
[2012-03-14 10:55] installed babl (0.1.6-1)
[2012-03-14 10:55] installed gegl (0.1.8-2)
[2012-03-14 10:55] installed gimp-devel (2.7.5-1)
[2012-03-14 11:01] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.26J/gimp-photoshop-brush-1.0-1-i686.pkg.tar.xz'
[2012-03-14 11:02] installed gimp-photoshop-brush (1.0-1)
[2012-03-14 11:02] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.Jc0/gimp-photoshop-brush-1.0-1-i686.pkg.tar.xz'
[2012-03-14 11:02] upgraded gimp-photoshop-brush (1.0-1 -> 1.0-1)
[2012-03-14 11:03] Running 'pacman -S --asdeps --needed extra/perl-xml-parser extra/intltool'
[2012-03-14 11:03] installed perl-xml-parser (2.41-2)
[2012-03-14 11:03] installed intltool (0.50.1-1)
[2012-03-14 11:03] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.GVM/gimp-plugin-saveforweb-0.29.3-1-i686.pkg.tar.xz'
[2012-03-14 11:03] installed gimp-plugin-saveforweb (0.29.3-1)
[2012-03-14 11:04] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.OX1/gimpfx-foundry-2.6_1-2-i686.pkg.tar.xz'
[2012-03-14 11:04] installed gimpfx-foundry (2.6_1-2)
[2012-03-14 20:27] Running 'pacman -Syy'
[2012-03-14 20:27] synchronizing package lists
[2012-03-14 20:30] Running 'pacman -Syu'
[2012-03-14 20:30] synchronizing package lists
I thank you in advance for your suggestions

I'm afraid the problem is in driver.
I compared sources of input-synaptics 1.6.3 and 1.7.0 and it seems that author has cut off the functionality of "repeating" scrollbuttons
Here's the announce of this new version:
http://lists.freedesktop.org/archives/x … 55593.html
And we can read there: "Purge scrollbuttons (repeat)".
Strange decision I think...

Problem touchpad scrolling, zooming ,etc

with usb mouse its ok, but when i use the touchpad its like useless, i normally use Alt+ scroll wheel to zoom, or scroll just to move.
But its useles, its just cant be used, is there anyway to make it work?
its a synaptics touchpad, win 7 64bit

is there no solution for these? or it cshould go somewhere else?

Laptop touchpad scrolling does not work with Verion 6.0. Why?

I have a Lenovo T400. since downloading the 6.0, I can not use the touchpad to scroll. It still works on the other application and also on MS explorer. The Arrows work on firefox and scroll using arrows, just not the touchpad. Thanks for any feedback.

i figured it out!
1) go to control panel
2) click on mouse
3) click on the UltraNav tab at the top
4) for the TrackPoint, i have the Enable TrackPoint box checked and the "Use as pointing device with advanced features
5) click on Settings
6) click on settings again towards the bottom right
7) for "Scrolling Type" click on Smooth.
that should work!

My laptop touchpad scroll is not working with firefox 4. It is wroking with other programs. When I attach a mouse then scroll works with mouse wheel. It is only not working with touchpad. It is/was working with firefox 3.6.x

I am using windows xp service pack 3 with Lenovo T60p.

I too have this problem, I have an Acer Aspire 7551G with an ALPS mutitouch touchpad. It works perfectly fine in every other program, and worked in Firefox 3.6. Scroll also works fine with a USB mouse. I tried downloading the 'latest' driver from the Acer support website, but when I tried to install it, it says that I am trying to install the same driver that I already have, so that fix isn't possible. I've only had the machine for 3 months, so I would imagine the drivers are pretty current.
I can't believe that this is a driver problem anyway, as I say, it works perfectly well in every other program, so it must be something wrong with Firefox. I was looking forward to using Firefox 4, but this problem is too annoying to put up with. Oh well, back to Chrome... at least until there is a fix found or implemented.

Mouse touchpad scroll settings not saved on reboot windows 10

The scroll settings are not been saved when rebooting the laptop. Just recently updated from windows 8.1 to windows 10. All was working before the update. The driver version that is 19.0.12.95, driver date 15/07/2015. Also as you can see on the inserted picture that in the test area it is black so no testing can be done.

Hello , Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I read your post about the Windows 10 update, and wanted to assist you!
Have you tried installing updated drivers using the HP Support Assistant, or the Windows Update? Please review the following document, to see if it helps:HP Products - Where Do I Find Windows 10 Drivers and Software for My Model? If you are still having trouble, then I recommend using the Go back to an earlier build option, in your System Settings:
HP Notebook PCs - Upgrading to Windows 10
Once you are back to your original Operating System, check to see if you are experiencing the same issue. If not, then you may consider holding off on the Windows 10 update for a few weeks, until drivers can be updated. Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

Samsung touchpad scroll indicator not visible in firefox only

Hi,
I`m using a Samsung N145+ with a synaptics / Elan software with W7 Ultimate.
When I open Firefox 18.0.1 the trackpad scrollbar indicators don`t work.
It scrolls perfectly but stays as a pointer.
It works perfectly in all other growsers and in explorer.

Just to understand the sequence: you have this problem when you are in a Firefox tab, click a link, and it opens in a:
* new window
* new tab
* same tab
I'm guessing a new window. Since the title bar area is a bit faded, some other window must have the focus, but which one?? If you press and hold the Alt key and press and release the Tab key, you should get the visual Task Switcher pane. The icon to the left of the current highlighted icon indicates the window that had the focus. If you then click that first icon, is it another Firefox window, or some other app?

Lenovo G510 touchpad scrolling not working in windows 7

I have a windows 7 - 64 bit operating system on a Lenovo G510
I have installed Touchpad driver for windows 7 from Lenovo site but i found very annoying problem which is the touchpad scrolling function not working .....
Please Help
Solved!
Go to Solution.

hi Shady710,
Welcome to the Forums.
If you have a Synaptics Touchpad, can you check if you have a One Finger / Two Finger Scrolling feature under Mouse Properties.
- Link to picture
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

When a PDF is opened in a tab, my laptop's touchpad scroll stops working for other tabs. (But works perfectly fine on the pdf tab or with every tab after closing the pdf tab)

My touchpad scroll was not working many times after i installed firefox 6. But it works perfectly fine in other browsers at the same time.
After some playing around, i found that this problem occurs only when a pdf is open in some tab (The scrolling works in pdf's tab but not in other tabs). Once that particular tab is closed, the scrolling starts working properly.

Using similar scroll function on my netbook. To add to the above, I find that using scroll is actually causing the PDF to scroll rather than the tab I'm actually in.
Reader 9 is installed on my Win7 Starter.

Why does the scroll sometimes not work?

I know this question has been posted before, but my problem is slightly different. I have synpatics touchpad with my laptop. Sometimes, the touchpad scrolling does not work, but my actual wireless mouse scrolling works. Sometimes my wireless mouse scrolling does not work, but my touchpad scrolling works. Why does this happen? The problem itself is not consistent.
The scrolling usually stops suddenly. Scrolling works perfectly fine for a webpage, but then it stops working during the middle of my scrolling. This problem started to bug me.
The problem still exists with Firefox reinstalled and without add-ons.

Does this happen on another browser? (eg. Chrome, IE)

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Scroll-zoom function does not work.

Hey,
I am using Adobe Acrobat 6.0 Pro on Windows XP and somehow I am not able to use Ctrl+scroll for zooming in and out.
It only works using Ctrl++ and Ctrl+-.
Do you know how I can turn the scroll-zooming function on again?
Thank you,
Finn

In later versions the setting is controlled by:
Edit > Preferences > General > Basic Tools > Make Hand tool use mouse-wheel scrolling
I don't have a copy of A6 to verify if the entry is in the same place or not.

Lenovo B560 touchpad scroll not working on Windows 7

As the title says, the vertical touch-scroll is not working in certain programs. It works in my browser, but not with OneNote or PDFs. It also works on Microsoft Word. The touch scroll actually did start working for a few days randomly, but then went back to not working. I didn't update anything during either of those times. When I do attempt to use the touch scroll, a cursor icon appears that looks like a little scroll bar.
I have tried updating the drivers, which did not work. I have made sure all setting are correct and that touch scrolling is enabled. This problem is really driving me nuts, so any suggestions are appreciated.

Hi Kukari. If you are experiencing the same issue on the same computer in the same operating system, unfortunately there are no Windows 8.1 drivers available for the HP Pavilion dm4-3050us Entertainment Notebook on the HP driver download page.
HP offers version 16.2.10.12 which you can try to reinstall (if you have not).
Synaptics TouchPad Driver (Windows 8.0)
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109924-1&cc=us&dlc=en&lc=en...
Synaptics offers version 17.0.19, although it may not be compatible with your TouchPad.
Windows 8/7/XP/Vista 64/32-bit Edition v17.0.19:
http://www.synaptics.com/resources/drivers
If the loss of functionality occurred after the Windows 8.1 update, you can either wait to see if the appropriate drivers are released for your notebook, or revert back to Windows 8.0.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Touchpad Scroll Zooming not functionin​g

Similar Messages

Maybe you are looking for

Touchpad Scroll Zooming not functioning