Touchpad scrolling not working since v16.0.2 upgrade.... All other Windows apps are fine. Scrolling even works in Acrobat Reader plug-in within Firefox.

Tried rolling back to a previous version to no avail. Seems the new version has made some permanent changes to the system.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
Try to modify the ui.trackpoint_hack.enabled pref on the about:config page from the default value -1 to 0 or 1 to see if that makes the scroll pad work.<br />
Close and restart Firefox after changing the ui.trackpoint_hack.enabled pref.
*http://kb.mozillazine.org/about:config

Similar Messages

  • TS4050 iCloud on Safari will not open Reminders -- I've tried using other browsers, and all other iCloud apps are fine. Any ideas?

    -- I've tried using other browsers, but no luck
    All other iCloud apps are fine via Safari (mail, calendar, etc.). Any ideas?
    I've tried clearing cache, logging in and out, switching off iMac.
    I'm using latest OS X and Safari versions.
    The problem seems to have crept to my iOS devices, which now register non-sync'd versions of my reminders lists, and which will not update via iClou

    Gawd, how have you managed not to update it?! The current version is Version 3.1.2 (4525.22)!
    Small wonder it won't work with 10.4.11.
    Have you ever used Software Updater to check whether there are any updates available for your Mac?
    I would recommend that you download the latest version from here:
    http://www.apple.com/safari/download/
    But please make sure that you download the version for Tiger and not for Leopard.
    BUT before you do so, and before you install it, please go through the following routine:
    Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
    Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
    In First Aid, click on Repair Permissions.
    This only takes a minute or two.
    Background information here:
    http://docs.info.apple.com/article.html?artnum=25751
    and here:
    http://docs.info.apple.com/article.html?artnum=302672
    If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
    Once that is complete reboot again from your usual start-up disk.
    More useful reading here:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/TS1417
    If all is OK, install the new Safari, and REBOOT, then repair permissions again.

  • Hyperlink that contains backslash is not working in Acrobat Reader 8 and 9

    Hi,
    Does anyone know why a hyperlink that contains backslash is not working in Acrobat reader 8 and 9?
    I created a document in Indesign CS and it contains hyperlinks that open up files from network drive so they contain backslash (for example: c:\foder\forder\filename.jpg). All the hyperlinks work in Acrobat Reader 6 but not in Acrobat Reader 8 or 9.
    Anybody could share the solution would be very much appreciated. Thanks!

    Did you ever figure this out? I am also having problems with the "No Hand" javascript which turns off the (not very helpful) page-forward hand icon (a hand symbol with a down arrow) which confuses our users when in fullscreen mode. We create interactive PDFs and everything worked fine up to Acrobat X/Reader X. Now in XI it doesn't allow the internal link icon (pointing finger) nor weblink icon (pointing finger with W) to appear. It just remains a plain o’ hand icon no matter what you mouse over even though there are links present.

  • SignatureValidate() method not working in acrobat reader 5

    Hi All,
    Will the method signatureValidate() work in acrobat reader 5. the same pdf validation which is working in acrobat reader versions >= 7 and not working in version 5. Kindly let me know if there are any alternative methods available to detect the digital signature field changes in lower versions. Urgent help required on this.
    thanks in advance.

    Did you ever figure this out? I am also having problems with the "No Hand" javascript which turns off the (not very helpful) page-forward hand icon (a hand symbol with a down arrow) which confuses our users when in fullscreen mode. We create interactive PDFs and everything worked fine up to Acrobat X/Reader X. Now in XI it doesn't allow the internal link icon (pointing finger) nor weblink icon (pointing finger with W) to appear. It just remains a plain o’ hand icon no matter what you mouse over even though there are links present.

  • Purchased and charged for a song today via my ipad.  it's in the cloud and on the iphone but it did not make it to the imac.  all other purchased songs are there.  any ideas?  thanks

    the song is in the cloud and on my iphone but not on the imac.  all other purchased songs are on the imac.  any ideas?  thanks

    ITunes menu, preferences, store.  Check off show iTunes in the cloud purchases.  Return to your music library.  Click the cloud icon to download it.  You must be signed into iTunes under the store menu.

  • Attach JavaScript not working in Acrobat Reader XI

    Hello,
    I created a fillable PDF in which I used the following JavaScript for an "Attach" button: 
    this.importDataObject("MyFile");
    This JavaScript worked and allowed the end user to attach files to the PDF in previous versions of Acrobat (through version 10 / Pro), but the button's functionality does not work in Adobe Acrobat XI.  The button has no functionality when clicked, and no errors are received indicating what the issue may be.
    Is there a bug that exists making this file not compatible with the Acrobat XI version, or is my coding outdated/inaccurate?
    Please advise and thank you for your help!
    Jessi Fenton

    Did you ever figure this out? I am also having problems with the "No Hand" javascript which turns off the (not very helpful) page-forward hand icon (a hand symbol with a down arrow) which confuses our users when in fullscreen mode. We create interactive PDFs and everything worked fine up to Acrobat X/Reader X. Now in XI it doesn't allow the internal link icon (pointing finger) nor weblink icon (pointing finger with W) to appear. It just remains a plain o’ hand icon no matter what you mouse over even though there are links present.

  • Shared review not working for Acrobat Reader

    I can not believe have not been able to find an anwer to this, sorry if it has been asked before.
    I am trying to setup shared review with clients running Acrobat Standard XI and Acrobat Reader XI, I am currently using a Sharepoint server for the review server if it matters.
    When I send a shared review from Acrobat Standard XI to a user on Acrobat Reader XI, the user is unable to make shared review comments.  The shared review will work when sent to other Standard or Pro XI users.  Any ideas?  I have been looking at this for sometime now, and know the user has full rights to the Sharepoint server.  Is there some setting I am missing in Reader?
    Thank you
    Update:
    I may be finding my own question, but really can not verify.  Must you have Acrobat Pro for shared review to work with Reader?  (I only have standard for pc)

    Priyanja, your statement is ture.  Reviews initiated with Acrobat Standard can only be participated through Acrobat Pro or Standard.  However, this is NOT by design.  It is a bug.  The Adobe website makes this very clear.  The site is:       http://www.adobe.com/products/acrobat/shared-pdf-document-reviews.html
    Gather feedback faster than ever
    "Send a document out for shared review to collect comments in one place. Anyone with free Adobe Reader 9 software or later can see and build on each other’s feedback, saving time with fewer emails and meetings."
    "How to set up a shared document review:"
    [... instructions ...]
    "Available in:"
    Acrobat XI Pro
    Acrobat XI Standard

  • My ipad does not appear as a device in itunes when connected (1st time trying to sync).  all other apple devices are fine and I have the latest itunes version.

    I have a new ipad2 for xmas .  I have tried to sync the device to itunes and it is not being seen.  I have the latest version of itunes, updated last night, and have several other devices that are seen fine (iphone/ipods).
    When I connect the usb direct to the mac iphoto starts but then that is it - itunes will not recognise the device......
    I have gone thourgh the suggested support help on the apple website and came to the last point - review community ... so here I am!

    What you provided is not everything mentioned.
    Your Mac is running 10.5.8 or later and iTunes 10?
    You are connecting the iPad direct to a USB port on your Mac and you have tried every port?
    You have reinstalled the Apple Mobile Device Service?
    If your Mac is running Snow Leopard - 10.6, have you checked this link?
    http://support.apple.com/kb/TS3540

  • Hi - my mac mini drops the internet after 30 seconds. If i reset in the diagnosics it works again but then drops it just the same. Its connected to my home network. All other apple devices are fine?

    I have a home network which services:
    Apple TV
    Air port express
    Mac book pro
    I phone
    All the above wrok perfectly.
    I have a mac Mini which will join the network and operates fine but keeps dropping the internet after 30 secods of connection?
    If I reset everything in the diagnostics box it will rejoin the network but then drops it again !!!
    any ideas?
    Chris

    Hi Chris, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

  • Touchpad Buttons Not Working

    I purchased this Toshiba Satellite C55D-B5102 last week, I installed Windows 10 last night.  After installing Windows 10 the touchpad did not work.  I have since fixed that issue.  However, now the buttons for the touchpad are not working and I'm unable to find a solution to this issue. I am able to use a wireless mouse for functionality, so that helps, however, this is a very hindersome problem...  Any guidance would be much appreciated.

    Hi I´m not sure if this gives any guide but this what I have done to "Win 10 + touchpad problems". I have a Satellite P30 W-B which is brand new. I installed Win 10 yeasterday and my Touchpad didnt work any good after that, I only had the cursor function and a click function working, no right click or so. I checkad all possible solutions here and there and what I finally did was to uninstall the ELAN tocuhpad driver and a ree-start. I thought the touchpad would be dead after that but it works fine! Now its a MS softwere instead automaticly, quite old. Now it works like before. THe ELAN driver came with he Win 10 package. I might have lost some functions incoperated in the ELAN driver like scroll or so but I wont install any new driver unless its working properly with Win 10 so I can wait for that. I hope this can be something for the moment.

  • Touchpad is not working properly on Satellite L30-X10

    Hi to all of you.
    I've got the following issue: On my notebook the scroll on the touchpad is not working. If somebody can tell me how to fix this problem it would be kindly appreciated.

    Hi,
    I am not sure if this can be a good solution but maybe its worth to try it:
    1. Download the latest touchpad software from here:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    2. Remove the old software
    3. Reinstall the downloaded software
    4. Go into your mouse properties and check if everything is configured (especially the scroll function)
    Give some feedback in case of further questions..
    Cheers

  • Touchpad does not work even after format - x220t

    Hi there,
    I've had my X220 tablet for about 10 months and it has been great.  For the last month however, the touchpad and touchpoint have become flaky.  When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
    I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing.  I have also updated/reset the BIOS.
    I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating. 
    When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck.  The touchpoint/touchpad did not work even in Windows 8.
    I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that.  When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
    As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled.  I am not sure of this, but it is my belief now.
    Are there solutions out there for me?  I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
    thank you,
    steve

    xyster wrote: 
    When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck.  The touchpoint/touchpad did not work even in Windows 8.
    If you are ready to reinstall Windows, try this method:
    http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
    If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
    X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
    IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

  • Tecra M3 - touchpad is not working with Windows 7

    I have a Tecra M3 that I have updgraded to Windows 7. The touchpad is not working.
    The Toshiba website does not have Windows 7 drivers for this model. I have tried installing the touchpad driver and TVAP from the A11 model but still cannot get it to work.
    Can anybody help? The audio doesn't seem to be functioning either.

    Hi buddy,
    As Silas wrote, it could be a little bit problematic to find the correct drivers because it doesnt support Vista...
    You should try a touchpad driver from another model like Tecra M4. This should work.
    But Im wondering about this. Basic functions of touchpad should also work without special driver.
    Can you use the touchpad at the moment?

  • The click at touchpad is not working, please help!!!

    I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!

    For this issue AppleCare support told me to so a SMC reset as follows:
    Power the machine OFF.
    At the SAME TIME hold down the following buttons:
    Shift
    Control
    Option
    Power
    Then release all buttons.  Power up the Macbook and see if the trackpad button work.
    Hope this helps.
    Bill

  • Re: Satellite L500D - Touchpad "touch" not working

    Hi everyone,
    my touchpad's touch function (to emulate left-clik by tapping the touchpad) is not working any more. I can move the mouse with the pad.
    Also the left button below the pad is not working - the right one is.
    I've already tried :
    -Updating the driver
    -Fn+F9
    -The touchpad settings - the "touch" function is enabled
    -The Toshiba hardware test - passed
    but with no success.
    Not sure whether it's a software issue or a hardware one.
    Any suggestions?
    Thank,
    Andres

    Hi
    As far as I know the option is called Tap to Click
    You should check if this enabled in the touchpad settings.
    >Also the left button below the pad is not working - the right one is.
    Maybe this has something to do with the fact that the left click by taping is not working
    Its hard to say what could cause this
    As I said; the options should be checked once again in control panel -> mouse -> device settings -> settings (or properties)
    If all the settings would be ok, then a touchpad hardware issue might be possible

Maybe you are looking for