Touchpad stopped working after windows 10

S7-392I installed the upgrade to the Synaptics driver to no avail.FnT and Alt.7 don't work.Any ideas?

I had exactly the same problem. I managed to solve it partiallly by downloading the Synaptics touchpad driver (Windows 10, 64-bit version). Follow these steps to "partially" solve the issue. Only pointing works now, and the buttons are still inacctive. 1- Download and install Synaptics touchpad driver.2- Restart your laptop. If the problem is solved, you're good to go. If not, do the following:3- Search for (Mouse & Touchpad settings) in the Start Menu and click on it. 4- Scroll all the way down and click on "Additional mouse options". A new winodow (Mouse Properties) with several taps will open.5- Click on the rightmost tap called (ELAN).6- Select "E-Lan Smart-Pad" from the "Device" box.7- Click on "Enable Device".8- If checked, uncheck "Disable when external USB pointing device plug in"9- Then click on "OK" As I said in the beginning, this only solved my problem partially. I am still not able to use the buttons on the touchpad, only pointing works.

Similar Messages

Toupad Tapping and Scrolling stopped working after Windows 10 Upgrade

Hi, I upgraded my OC to Windows 10 today, after the upgrade tapping and scrolling stopped working on the synaptics touchpad. the toucpad only finctions as a pointer now. for taps/Clicks i always have to use the buttons below the touchpad. It was working fine before the upgrade, the earlier OS was Windows 7 I have checked for driver updates but i get a message that the drvier is up to date.I have check the device setting and confirmed that tapping and scrolling is enabled.I have also done a device reset. Nothing solved the problem, i also did not find a relevant answer on the forums.Also, the same problem did not happen with my other HP laptop (Notebook PC) which was also upgraded to windows 10 recently. Does anyone have a solution? Regards,Siddharth.

, Hello and thanks for posting on the HP support forums. What you will need to do is the run the Windows Update Fixer tool. Here is a link to help you with that. Make sure you run all updates including optional. Fix Microsoft Windows Update Issues If that fails to work the only other option is to roll your system back to the original supported operating system that came with your notebook. Thanks again for the post and have a great day.

Usb ports stopped working after windows 7 install - pavilion g6-1001sa

After reinstalling windows - My usb ports have completely stopped working - not recognised at all - These happened previously and I was able to download and install a driver which worked - I have been unable to find it this time
thanks
JO
Please help

teethinnit wrote:
I had tried here - the correct driver was not here - it is the USB controller that I am looking for
Ok go to your search bar and type "Change Device installation settings"
and look at my screen shot and this change should make it look for the latest driver.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Keyboard and touchpad not working after Windows 10 update

after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine

It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

FIngerprint reader stopped working after windows automatic updates

Hi,
I recently purchased an Envy j109tx laptop.
From day one the finger print scanner was not working.
After updating hp simplepass it started to work.
Again today I installed some windows update. After that it stopped working.
The light in the fingerprint reader is not turning on.
Is there a fix for this?
Someone please help me.
Thanks in advance.

@naga5speed ,
Hello and thank you for posting on the HP support forums. First thing did you do the windows update due to your system having some issue?
If not then do a system restore back before the update.
It is probably some microsoft update that is conflicting with the driver.
It is good to keep your system up to date. But it is better to make sure before you run an update that you take a look as to why you are updating.
Do I need to fix an issue?
If i do not do the update will something stop working?
Using Microsoft System Restore (Windows 8)
If this fails to work then you may have to back up your data and run a system recovery. The reason for this is what ever update you ran has made changes to system files or the registry that a restore will not fix.
Performing an HP system recovery (Windows 8)
Here is another link you may find useful.
Fix Microsoft Windows Update Issues
Please let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Touchsmart IQ770 - IR stopped working after Windows 7 Install

Have had the satellite hookup working under Vista. Loaded up Windows 7 and now when I try to setup the tuner the IR is not found.
During Tuner setup I see the signal and hear the audio, it is just the IR part that stops the setup configuration from working.
Could the Bluetooth be interference?

Try to install the HP Remote Solution software when it becomes available to see if that works.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01778879&lc=en&dlc=en&cc=us&product=3781376&lan...
Certain buttons on the Remote Control for Media Center might stop working.
Update to the latest HP Remote solution download from www.hp.com/support .

Personas has stopped working after Windows updates. Halp! How do I get personas to start working again?

Personas was working just fine. A few days ago there was a Windows update (somewhere along the lines of 20 updates). Both our Vista laptop AND our 7 Desktop were updated and now personas doesn't work on either computer . . . with the exception of one user account on the desktop. <--- which is weird, huh?
We are perplexed. When we mouse over a persona, the font color changes but the picture doesn't. When we wear a new persona again, ''only'' the font color changes but the picture doesn't. It seems to be 'stuck' on whatever our current persona is on the computer. I also tried uninstalling personas and rebooting and . . . the persona picture was still on the computer. More weirdness. I re-downloaded personas after this but the problem persists.
I've searched and searched and can't find anything on this. My best guess is that it has something to do with one of the Windows updates as several of them were security updates ... but this is only a guess on my part.
Any help would be greatly appreciated. Let me know what other information I can provide to try and resolve this problem.
Oh, both machines are running the current versions of Java and Adobe flash. We are running on Firefox 3.6.17 on both laptop and desktop.

Anyone else experiencing this problem? Anyone have any ideas/suggestions on what to look for to try and resolve this? Thx.

Satellite P200 - Microphone has stopped working after Windows 7 install

My Satellite P200 came with Vista Ultimate, the mic worked for a few months suddenly it stopped. I decided to install Windows 7, but mic still does not work.
Any ideas anyone?
I use this laptop to skpe my folks a lot. I can use an external mic fine, but really want my inbuilt one working again.

Hi buddy,
Sounds like its something wrong with your Windows 7 installation if the microphone doesnt work anymore...
I would recommend updating the webcam driver because the microphone is a part of it. You can find driver updates here:
http://eu.computers.toshiba-europe.com
I dont know what Satellite P200 you have exactly but if you cant find a Windows 7 driver for webcam, choose another model that is fully Windows 7 supported, e. g. Satellite P300.

ITunes stopped working after Windows Service Pack 2

Maybe it's a coincidence, but I've been having all sorts of problems loading the latest iTunes version (64-bit) ever since I downloaded (not by choice) WIndows Service Pack 2.
iTunes just won't open.
First it would open and say that the color scheme had been changed by some setting somewhere.
Then it wouldn't open at all.
I've fooled around with permissions and compatibility settings -- I've reinstalled the latest iTunes for WIndows 64-bit -- and iTunes just will not load.
I've seen some evidence online that I'm not alone in this problem, though it's hard to tell. The solutions I've seen seem to be a bit complicated -- does anyone have any information on this problem or am I going to have to go back to an Apple computer if I want to continue using iTunes???
Thanks for any help.
B
PS For now I've got to leave on a 4 -hour trip for which I'll have no music thanks to this problem -- so any and all help will be greatly appreciated.

Roll back the service pack.(uninstall software through control panel.) Does it work again?
Reinstall service pack. Make sure antivirus and all other software is not running in background. Reboot.

Satellite L550 - Flash Cards stopped working after Windows 7 64bit repair

I tried installing/reinstalling/uninstalling and then installing again, Toshiba Value Added Package and flash cards support utility. No luck...
Flash cards utility is installed: [https://dl.dropbox.com/u/3002908/Capture.PNG]
What now? :)
Laptop model: L550-15F (PSLN4E)
Also, does anyone know why a search for drivers for my model returns bluetooth stack package but my model doesn't seem to have bluetooth? :)

Hi
Wait a moment, please! In which order you have installed/reinstalled the Value Added Package and Flash Cards Support Utility? It would be interesting to know what you have done exactly.
I have used the following repair order for this problem:
I uninstalled Flash Cards Support Utility and then Value Added Package. I did make a restart and cleaned the system by using CCleaner. One restart more and I installed Value Added Package firstly and then Flash Cards Support Utility. Now I did make the last restart and the FN keys started to work!
Its important that you install the new versions for Windows 7!
That means Flash Cards Support Utility version 1.63.0.4 and VAP version 1.2.34_64. I founded both on the Toshiba website :)

USB ports stop working after windows 7 installation via USB Boot camp

topend macbook pro retina 15 model purchased in Jan 2014 ,upto date.OS X 10.9.1
tried installing windows 7 ultimate through boot camp using USB. the installation is fine and smooth. windows 7 ultimate is properly installed but the point where you install the support software through USB all the USB ports die out just before logging in into windows. Also a red light on the headphone jack goes on. NO USB flash drive orUSB device is operational or in other words detected by the mac. Hence neither can I finish the support software installation which has all the necessary drivers nor connect to the internet . tried the SMC/NVRAM reset as instructed by the apple support but no change in the situation.
USB ports fully operational when boot in MAC os .
Another problem I face is when I try connect my iphone 4S to macbook pro via USB it keeps connecting and disconnecting and makes the charging sound repeatedly . The same iphone can connect to other laptops flawlessly.
please help .
Thanks

Since you just bought it, you may want to make a Genius Bar appointment and let them diagnose the issue. Use your warranty. Bring your phone and cable along too.

Bonjour printer on Windows XP's stops working after reboot

Hello!
We have a AirPort extreme with an HP LaserJet 1010 connected to it. AirPort Extreme also serves as a gateway and DHCP server for the LAN.
Installing the printer on the local machines running Windows XP thru Bonjour works fine and all the documents are printed correctly. The printer is being installed as a single default printer on the system.
However, printer stops working after Windows XP machines are rebooted (the next morning). The installed printer keeps accumulating documents in queue and not spooling them to the printer. Issue could only be resolved by adding a new printer (which also works fine).
It seems not to be a connectivity problem as XP machines access the Internet thru the AirPort Extreme without any problem. Bonjour printer setup wizard also instantly sees the printer and is able to install it correctly. Mac's in the same network (iBook G3 and PowerBook G4 with Tiger) are not affected by the issue.
Any ideas on how the situation could be corrected?
- Baglan

Did anyone find a solution to this.
I have a HP Laserjet 1020 attached to my Airport. Using the Bonjour program on my Windows XP computer it found the printer attached, and added it to my printers. When I print all seems ok - it appears in the printer queue, then disappears as though its printed - but nothing comes out of the printer.
Any ideas? Thanks.
Message was edited by: jonny999

Compaq Presario CQ62 DVD not working after Windows 7 automatic install of upgrades

The DVD in my Compaq CQ62 stopped working after Windows 7 automatically installed updates. The driver seems to be corrupted. When I open Device Manager, the DVD comes up as hp DVD RW AD-7701H SATA CdRom Device and the device status displays...A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32).. There are two drivers installed--cdrom.sys from Microsoft, File Version 6.1.7600.16385(win7_rtm.090713-1255) and PxHlpa64.sys File Version 2.03.32a from Sonic Solutions. If anyone knows the link to download the new driver or how to resolve this problem please let me know.

We are not sure what might have caused this issue. You may try removing the affected filter drivers and check. This has helped few.
To do this, follow these steps:
1. Click Start , type regedit in the Start Search box, and then click regedit in the Programs list.
If you are prompted for an administrator password or confirmation, type your password, or click Continue.
2. Locate, and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Caution There can be many instances of the registry subkey that is mentioned in step 2. You must make sure that you are in the appropriate registry subkey before modifying the UpperFilters and the LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the Default data value is DVD/CD-ROM and the Class data value is CDROM.
3. In the right pane, right-click UpperFilters, and then click Delete.
4. Click Yes to confirm the removal of the UpperFilters registry entry.
5. In the right pane, right-click LowerFilters, and then click Delete.
6. Click Yes to confirm the removal of the LowerFilters registry entry.
7. Exit Registry Editor, and then restart the computer.
Note After you remove the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall any affected programs.
See which Windows updates are installed
http://windows.microsoft.com/en-US/windows7/See-which-Windows-updates-are-installed

Hp 110 3530nr touchpad stopped working

hp 110 mini running win7 touchpad stopped working after using usb mouse

New Years Greetings!
If this is Synaptics TouchPad, try this:
Control Panel > Mouse > Device Settings
On that page, look to see if you have "Disable internal device..." checked.
Regardless, you can try the "Reset Devices" button to try and kick it free.
I hope this helps.
Say “Thanks” for the Help! Click the Kudos Star whenever you find a Post that helps you.
Fixed? Mark this Post “Accepted Solution” to say the solution worked for you.
Kind Regards,
Dragon-Fur

Touchpad stops working on X201 (and other models)

I have an X201 and noticed tha tthe toucpad stops working at seemingly random intervals. After tracking down the culprit to the Synaptic Touchpad Enhancements process, I did a search and found other people having the issue in the Thinkpad W series forum. Instead of reposting it here, you can find my reply with an easy workaround to get it working again over in this thread.
http://forum.lenovo.com/t5/W-Series-ThinkPad-Laptops/W150-Touchpad-stops-working-after-a-certain-tim...
Somebody thinks the problem only happens with Firefox, which I happen to use as well, so the problem could be between Firefox and the Synaptics process.
Lenovo: Please fix this. Thank you.

Hi All,
I've posted a temporary workaround regarding this issue, you may read it here.
In another note, this issue is currently being investigated by the engineering team.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Touchpad stopped working after windows 10

Similar Messages

Maybe you are looking for