Touchpad won't click?

I've searched around for other topics about this problem but none of the answers seem to work for me D:
I even tried plugging in a mouse from my old laptop, that i checked and works just fine, but once i had plugged into my mac, it wouldnt click.
I will be going to an apple store to get it checked if I really have to, but I'm hoping i can somehow fix it myself. Help?
Also, my mac is fairly new, just 3 months old!

Welcome to Apple Discussions!
You could try a SMC reset:
http://support.apple.com/kb/HT1411?viewlocale=en_US
Good luck!

Similar Messages

Windows 8.1 - T440s touchpad won't click for 1 sec after typing keyboard.

This is a well-known issue of Windows 8.1.
See http://support.microsoft.com/kb/2907018/en-us
But the problem is still there even after I did what the article says.
I disabled touchpad delay and installed hotfix from MS with no luck.
So I guess MS hasn't fixed it perfectly or there is a bug in Synapics' driver.
As a programmer, I alternate between typing keyboard and clicking buttons very quickly.
So this is a huge problem to me.
Is there anybody who knows how to fix/avoid this?

Look in the Synaptics Ultranav settings. There's a checkbox for Prioritize for Trackpoint and Keyboard input. Uncheck this.
Also disable PalmCheck if you haven't already.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Physical buttons on E440 touchpad won't work after coffee spill: capacitive layer works fine

Hi, can you help me with my stupid problem?
I have 2 questions:
1) Is there a way to enable trackpoint to work with the capacitive layer? I.e. to be able to use it without physically pushing the pad down. Now, as soon as I touch the trackponit, it disables light clicks (touches) of the touchpad, I guess to prevent unintended palm clicks
2) Is there anything I can do to make the buttons work again? (See the story below.) I have cleaned it all even inside, but there were almost no stains at all anyway, none on chips or cables. And it partially worked just this morning.
I guess I could soak it in water, then ethanol, and finally dig into rice grains for a week or two as a last resort...but I hope for a more electronics-friendly solution.
Story:
I spilled my coffee into the keyboard and touchpad, and even though almost no water got onto the motherboard (a few drops), I cut off the power supply in less than 10 seconds, and I cleaned it all thoroughly (even managed to get inside the touchpad itself and assemble it all back...what a pain), it works weird.
At first, it registered about 1/10 or 1/20 of physical button presses (depressions of the pad). So technically it somewhat worked. The capacitive (touch) layer worked fine including multitouch. Then I tried to just click on it repeatedly for about 100 times rapidly, and it started to miraculously work 100% fine...for about 30 minutes, then it returned to the 1/20 state again. But as soon as it started to work fine, the multitouch recognition died, so it wouldn't scroll etc. And after returning to the bad state again, multitouch was still dead. Then I tried to reinstall the drivers: multitouch has started to work (so scrolling and gestures are OK now). But the physical buttons appear to be absolutely dead at this moment, it won't register any click/depression at all. The capacitive layer works fine though, so I can still use it as a normal touchpad without physical keys.
But this renders trackpoint unusable as it requires physical depressions of the touchpad to register clicks.
Thank you very much!

hi, calleasto
sorry to hear about this mishappen. I recognize it, since it happened to me a few years ago, also my daughter pooring thee (not coffee - but the difference is marginal - ) into an external keyboard. I took it apart and cleaned and dried it very carefully, but never got it working again. This was an external keyboard.
a similar failure occurred to other people with they laptop keyboards (and to me, without "using" any liquid). I presume - without knowing really the interiors of the laptop keyboards - that (1) they are read out in a kind of matrix (sensitive bars arranged in rows and (almost) columns corresponding to keys), which needs two layers of contact strips; and that (2) the layers are separated by plastic sheets.
Your diagnostics seems to imply that
1) there are still bad contacts (might be liquid where it shouldn't be);
2) the contact point has shifted ;
The latter could perhaps be due to liquid shifting the pressure away from the point where it should be applied.
What i would do:
Give the keyboard much time for drying - perhaps by removing the keys again. But there is always the chance that the temperature of the coffee, and the residues are causing troubles and might cause some keys not to function properly.
I think (i am not sure !!) you have a "unibody": i think it is "unique " in the sense that it has no screws (except at the bottom) - and no Firewire outlet. I have never opened my MB, but the only way i see for opening it is from the bottom (there are 4 screws at mine) - but i do not know whether it is advisable to open it. I would check via Phone with Apple before doing anything myself.
Hope this helps.
Thomas

After using Firefox for years, suddenly it won't click on. How can I get it to work ?

Suddenly Firefox won't click open. I tried to uninstall it(Windows 7, 64-bit and try to download the newest version from the Mozilla website, but each time it starts to uninstall and/or install the message appears: you must close all versions of Firefox. All versions ARE closed, but it makes no difference; the operation just stops.
I have no trouble with my Google Chrome and IE browsers, just with Firefox.

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Remote Won't Click Up

Just today our remote for Apple TV 2 won't click up. The click sound is even gone.
Any ideas?

Just the up position on the scroll wheel?

How to disable TouchPad 'tap to click' on Equium A200-15L under Vista

Until mid-December I had the Synaptics Touchpad 'tap to click' disabled. Then it somehow became enabled , the right-click menu item to change it greyed out and the mouse properties, settings etc contain no reference to it. It has been suggested that Windows Updates somehow interfered. I have tried uninstalling and reinstalling touchpad drivers both directly from Synaptics and from the Toshiba site, but it hasn't helped. Apart from using the recovery disk and reformatting what can I do?
Toshiba Equium A200 15L Laptop (PSAE2E). Windows Vista Home Premium.

Hi Juliana
I have read also about the Vista updates which could affect the touchpad settings for me it sound very mysterious
I thought about the same touchpad driver reinstallation procedure.
But it looks like this doesnt help to get the click functions back.
I think the recovery CD would be the last resort.
Good luck

Trackpad or mouse won't click

Hi everyone, I've got a weird problem here.
All of a sudden, after waking it from sleep, the trackpad on a 2GHz Intel Core 2 Duo MacBook, running 10.7.5 (as high as it will go), won't click.
I heard that this can happen when a Bluetooth mouse is connected and somehow being pressed down, so just in case, I shut Bluetooth off. Still nothing.
I connected a USB ump use, just like the Trackpad, I can use the mouse to move the cursor around, but it won't let me click on anything.
However, using my iPhone and Screens, I can connect to my MacBook and I can click using that device, but it's totally useless for long term use.
I've restarted, booted in single-user mode, did some basic repairs, booted in safe mode, zapped the PRAM, nothing bring back the mouse or trackpad clicking.
Does anyone have any idea?
Hope you can help.

Oh and I don't know if this will give anyone a clue as to what's going on, but if I move the cursor over the Dock, the magnifying effect doesn't happen anymore and the apps' names don't appear.

Wireless mouse won't click

My wireless mouse has worked fine, until today. It tracks fine, but won't click unless I press really hard in the middle. Left and right click are gone. I checked the mouse preferences, and changed the batteries, and restarted both mouse and computer. Any ideas?

I could be some debris built up in the leading edge of the mouse. I've heard that sliding a Post it Note in the top crevice will clean it out nicely.

How do you get the auto red eye to work in iphoto when it won't click?

When we are trying to correct the red eye problems from photos taken from my dads Sony point and shoot camera iphoto's automatic red eye option isn't enabled. We tryed to fix this by upgrading to the latest version of iphoto but the problem persists- the autocorrect for the red eye won't click. We are feeling ripped off because it should work. Right?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it does try the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If the red eye correction works OK in the new library do the following on your original library: make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Note: the following is for iPhoto 9.4
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

TS1365 Mouse won't click

My Macbook turns on and the mouse can move around but the mouse click does not work?? Any ideas to fix this?? Sometimes the icons on the bottom don't enlarge when I run my mouse over them and the top left stuff works although slowly and randomly but only using the return key and the mouse still won't click.

Thank you very much, Monkey Chow, I had this problem, and your aswer solved my question ! This was of great help ! I was already wondering about giving my my for repair. Of course the technician would have found a mac perfectly working!
Many many thanks !

My touchpad does not click ,what should I do?

My touchpad does not click ，what should I do?

Does the hard click work?
If so, System Preferences > Trackpad > Point & Click, enable Tap to click.
Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
The suggestion in this article may help.
http://support.apple.com/kb/TS1248
If these steps do not help,take the computer to the Apple store to check the battery and trackpad out.
Best.

HP Support Assistant pop-up message frozen on my lower right section of the screen, won't click off

Help! A pop up message from the HP Support Assistant keeps popping up a few minutes after starting up my Pavilion laptop. It won't click off. It asks me if I want to keep Quick Access in my taskbar, but it won't let me pick yes or no or click it off. Help!
If I restart my computer, it goes away, but then comes back.
What can I do? Thanks

Hello wwheartww,
If you go into the HP Support Assistant settings you can change how you display notifications on your laptop. Try setting the notifications to task bar only and see if the pop up continues to come up on your screen.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

My macbook mouse/touchpad has stopped working. After 5 minutes ,the mouse won't click and I have to shut down. What's wrong?

I have a white macbook, about 4 years old. Every time I use it, after five minutes, the mouse and touchpad stop working. You can still hear the click but it doesn't actually click anything on the screen, effectively freezing the computer. I have to just shut it down. What can i do about this?!? Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Touchpad tapping and clicking

Hello.
I have a strange problem with the touchpad. I cannot select internet search result using the touchpad. I tried double tapping, right clicking, left clicking. It just won't work. I have to copy the link and paste the link in the URL. I already check the pop-up blocker.
Touchpad works fine on my internet home page. I can double tap(s) on a story, news, and other icons. No problems. It just when I do a search. I can only see the result, but cannot click on it, or double tap it.
I'm hoping someone out there with a similar problem. It is a laptop Pavilion dv7. I'm using Windows 7/64.

Hello pavilion,
Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
That is a very strange issue you are having with the TouchPad. I will need some additional information. What browser are you using? Have you tried a different browser? What is your product number?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Partially [SOLVED] SD reader and touchpad won't work in AAO D260

Hi people, I recently bought my new netbook with the shiny W7. Funny because the first thing I did is plugin in my Arch pen drive and wipe the entire HDD. I installed Arch easily and I could make work almost all of the hardware except the SD card reader and the touchpad.
Actually, the touchpad does work but the synaptic features don't (two-finger scrolling, middle-click emulation, etc.). I've followed the instructions from the wiki but for some reason, it won't work.
The SD card reader seems to be up, but when I insert a card in it, dmesg shows me this:
usb 1-5: new high speed USB device using ehci_hcd and address 3
hub 1-0:1.0: unable to enumerate USB device on port 5
And there is no new block (sd*) apart from sda which is my HDD.
If you want to know, this is the output of lspci:
00:00.0 Host bridge: Intel Corporation Pineview DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Pineview Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Pineview Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1)
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Ah, my Arch is 64bits but I don't think it makes any difference in these problems.
Thanks in advance!
Last edited by sironitomas (2011-01-31 01:29:45)

whitethorn wrote:
I think the problem you have with the touchpad is the same one I have. I have an acer aspire one 721, the touchpad is a new alps touchpad. I haven't been able to get mine working yet. I've haven't spent much time on getting it to run.
Have a look here maybe it'll help.
https://bbs.archlinux.org/viewtopic.php?pid=250490
My touchpad doesn't get identified as an alps touchpad. It get identified as a PS/2 Generic Mouse
Currently I'm trying to figure out why hibernate and suspend aren't working. I'll follow your thread maybe someone has a clue.
It must be the same touchpad. If you want to compare, below is the output of "hwinfo --mouse"
33: USB 00.0: 10503 USB Mouse
[Created at usb.122]
Unique ID: FKGF.gRjmE_XIt35
Parent ID: pBe4.v+N+B0xY+P6
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0
SysFS BusID: 2-1:1.0
Hardware Class: mouse
Model: "KYE Optical Mouse"
Hotplug: USB
Vendor: usb 0x0458 "KYE Systems"
Device: usb 0x003a "Optical Mouse"
Revision: "1.00"
Compatible to: int 0x0210 0x0013
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event10, /dev/char/13:74, /dev/input/by-id/usb-Genius_Optical_Mouse-event-mouse, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-mouse, /dev/char/13:33, /dev/input/by-id/usb-Genius_Optical_Mouse-mouse, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-mouse, /dev/char/13:63
Device Number: char 13:63 (char 13:33)
Speed: 1.5 Mbps
Module Alias: "usb:v0458p003Ad0100dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 3
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #26 (Hub)
35: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.183]
Unique ID: AH6Q.oV6xZUCQFf1
Hardware Class: mouse
Model: "ImPS/2 Generic Wheel Mouse"
Vendor: 0x0002
Device: 0x0005 "ImPS/2 Generic Wheel Mouse"
Compatible to: int 0x0210 0x0013
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event6, /dev/char/13:70, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/char/13:32, /dev/input/by-path/platform-i8042-serio-1-mouse, /dev/char/13:63
Device Number: char 13:63 (char 13:32)
Driver Info #0:
Buttons: 3
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Could you get the SD card reader working? Here is the data from "hwinfo --redasd" as well. It seems the manufacter is MPX.
01: IDE 00.0: 10600 Disk
[Created at block.245]
Unique ID: 3OOL.uvOtdmgvZE3
SysFS ID: /class/block/sda
SysFS BusID: 0:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
Hardware Class: disk
Model: "Hitachi HTS54502"
Vendor: "Hitachi"
Device: "HTS54502"
Revision: "PB2O"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Device File: /dev/sda
Device Files: /dev/sda, /dev/block/8:0, /dev/disk/by-id/ata-Hitachi_HTS545025B9A300_100604PBN2033SDWG3HT, /dev/disk/by-id/scsi-SATA_Hitachi_HTS5450100604PBN2033SDWG3HT, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0, /dev/disk/by-id/wwn-0x5000cca5f4da9280
Device Number: block 8:0-8:15
BIOS id: 0x80
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
02: SCSI 500.0: 10600 Disk
[Created at block.245]
Unique ID: uI_Q.rzrXVB8WAiE
SysFS ID: /class/block/sdb
SysFS BusID: 5:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0
Hardware Class: disk
Model: "MPX Memory Slot - 1"
Vendor: "MPX"
Device: "Memory Slot - 1"
Revision: "0.00"
Driver: "usb-storage", "sd"
Driver Modules: "usb_storage"
Device File: /dev/sdb
Device Files: /dev/sdb, /dev/block/8:16, /dev/disk/by-id/usb-MPX_Memory_Slot_-_1_MP600-0:0, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:3:1.0-scsi-0:0:0:0
Device Number: block 8:16-8:31
BIOS id: 0x81
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
03: SCSI 500.1: 10600 Disk
[Created at block.245]
Unique ID: LUEV.6sZ8Ft89QY2
SysFS ID: /class/block/sdc
SysFS BusID: 5:0:0:1
SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:1
Hardware Class: disk
Model: "MPX Memory Slot - 2"
Vendor: "MPX"
Device: "Memory Slot - 2"
Revision: "0.00"
Driver: "usb-storage", "sd"
Driver Modules: "usb_storage"
Device File: /dev/sdc
Device Files: /dev/sdc, /dev/block/8:32, /dev/disk/by-id/usb-MPX_Memory_Slot_-_2_MP600-0:1, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:3:1.0-scsi-0:0:0:1
Device Number: block 8:32-8:47
BIOS id: 0x82
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Let me know if you have some info.

Touchpad won't click?

Similar Messages

Maybe you are looking for