Touchscree​n not working in win 8 and after upgrade to 8.1

I am facing touchscreen problem with my hp-b150us laptop for the last few months. It worked fine for 6 months after purchasing the laptop. Later upgraded to 8.1. It worked for couple of times. but once I shutdown and restart my laptop again the touch does not work. I have tried all the options provided in this site but still no luck. please suggest
Thanks,
Sreenivas.

Have you tried installing this driver
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-125445-1&cc=us&dlc=en&lc=en​...
not sure if that's the fix but worth a try
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Similar Messages

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

    After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

    Additional testing i perform to make wifi work but nothing works out:
    i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
    wifi was working with older software versions. i think there should be a problem with 8.1.1.
    is anyone has fix for this issue?

  • Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week. 
    Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
    Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
    Fix:
    With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
    It also supported AOL, AIM, Google Talk, Jabber.
    Guess I miss it frist time... hope this helps...

  • The search function in App Store, is not working in my iPhone 4, after upgrading to ios6

    The search function in App Store, is not working in my iPhone 4, after upgrading to ios6. Does anyone have a solution for this problem?

    Having the same problem.  No response from Apple as I tried all the suggestions.  Had to perform a system restore.  Currently iy's working.  Make sure you backup everything to your computer.  IOS6 is still glitchy in other areas.

  • Wifi is not working in my iphone 4s after upgrading its ios to ios 7.. now i want to downgrade it back to ios 6.1.3.. is it possible to do it and if yes then HOW?? Please help

    wifi is not working on 4s after upgrading its ios version.. please help me, what to do???

    thanks, but what if i restore my iphone using itunes, will it help me? actually i brought this phone from australia and now i am using it in india and it is factory unlocked.. so if i restore it to factory setting then shall i have to go through factory unlock process again or my phone will stay activated for indian telecom network?

  • APS not working on Ideapad S10-3s after upgrade to Win 7 ultimate

    I just upgraded from Windows 7 starter to Windows 7 ultimate, and APS is not working. Tried installing the beta version of APS but still don't work. Is there any solution to my problem? I badly need the APS to work ....pls. help. thanks!

    Hi asalamk,
    The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
    You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

  • Scanner not working in CS3 or CS4 after upgrade?

    I've been using Photoshop CS3 on my iMac pretty much since it's release and have a Canon Canonscan 4400F scanner which has always worked perfectly. However since I upgraded to Snow Leopard the scanner has been incredibly intermittent and now has finally packed up altogether but ONLY in Photoshop.
    In CS3 if I try to import from my scanner I get this errror message:
    "Cannot communicate with scanner cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed 155.0.0"
    When I upgraded to Snow Leopard I found that the scanner didn't work at all but went to the Canon website and downloaded the latest drivers and software and that got it up and running. However I then noticed that I had to re-install the driver each time I rebooted my Mac if I wanted to use the scanner via Photoshop i.e. the Canon Toolbox software always works but the TWAIN driver seems to pack up each time in Photoshop.
    As I now have a lot of documents that I need to scan urgently yesterday I spent a number of hours trying to fix this problem as I really need to be able to scan from inside Photoshop. I once again downloaded the latest drivers and software from Canon and also downloaded the latest Canon Printer/Scanner drivers from Apple but yet again this made no difference. I then downloaded a trial version of Photoshop CS4 (and the separate TWAIN driver) and installed that. However since doing this I now cannot get my scanner to work at all in either version of Photoshop and even re-installing the latest driver from Canon won't get it working. I get the same error message saying that it cant communicate with the scanner but yet again the Canon Toolbox software DOES still work and so I can scan by using that, just not from inside Photoshop. Clearly it can't be a 'communication' problem if one program does work but another doesnt so it seems to me as though there is a problem with Photoshop CS3/CS4 under Snow Leopard with Canon scanners.
    Anyone else have this problem, anyone been able to solve it?

    I have solved the problem absolutely.
    Here's the problem, but you're not going to like it much.
    Scanner companies have not continued development for their scanners for Macs. Microsoft will release significant operating system changes and the scanner makers will pop up a new driver quick as a bunny. But any change to Apple's Os is pretty much ignored by the scanner manufacturer. I bought a HP scanner just before Apple released OS X and, though they promised me OS X drivers for it, they never did the work.
    I think everyone's pretty much following HP's example here.
    I have an Epson Perfection 3170 Photo scanner. It's a good scanner, but Epson has EOLed any further upgrades to its software. I upgraded my Mac (not my operating system) from a G4-400 (sawtooth) with a 1GHz processor upgrade to a new Mac Pro. I had been running Adobe's CS3 applications on my Power PC processor but, as soon as the applications went to Intel, I couldn't scan through Photoshop.
    The problem is that the Epson Scan software is PowerPC only. You cannot use scanner software for a Universal Binary that runs Power PC only unless the Universal Binary is running on a Power PC or through Rosetta emulation on Intel. As Photoshop will choose to run using Intel-native code (it's faster), that would make it incompatible with a Universal Binary on Intel. You probably have that type of incompatibility.
    Snow Leopard is a 64-bit operating system that has some pretty clear requirements with respect to drivers. One big requirement is that applications that were written in Carbon are going to find it tough going, unless they're written using the Cocoa framework. Scanner manufacturers won't make any money off of rewriting their scanner application and Photoshop plugins for Snow Leopard. They would rather you purchase a new scanner -- then they'll make money off of that and its Snow Leopard and Intel-capable drivers.
    Currently, what I do in Leopard (I have not upgraded to Snow Leopard yet because a number of my applications will break if I do) is I use Epson's Scanner software and scan to a folder. then I drag everything into Photoshop. It's a two-step process, but it does work.
    Additionally, if your scanner's standalone software doesn't work, you can purchase Hamrick's Vuescan which does work under Snow Leopard and does work with the 4400 F (you have to have your Canon drivers installed to get it to work).
    They do offer a free trial for downloading if you want to try it out. And since they just sell software, they will upgrade it and keep it current.

  • Flash light is not working in camera or Torch after upgrade

    Hello
    My S850 Flash light is not working while I click any Picture or while turning the torch ON. It was wprking perfectly before but after Upgrade it stopped working.
    baseband version is: S850.ROW.V109,2014/09/23
    BUILD NUMBER: S850_ROW_211_140923
    Kalpesh

    Hi
    Sorry...The flash isn't working when you take pictures or the torch/flashlight isn't working?
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • ICloud not working on iPad 4 Gen after upgrade

    iCloud is not working on my iPad 4 gen after upgrade to iOS 8.  I have Yosemite beta and iCloud works on my iPhone, windows 8 and of course my mac with beta Yosemite.  Does anyone else have a similar issue.

    Reset iPad and the problem cleared up for now.

  • Mavericks Mail not working properly with Exchange server after upgrade from Lion

    Mail will no longer maintain a stable connection to my company's Exchange server after upgrading to Mavericks from Lion.  Nothing has been changed on the Exchange server.  It has only partially downloaded the messages that are on the server.  It seems to download current messages when they hit the server.  It has difficulty sending messages.  When I send a message, it gets stuck in the Outbox.  It is constantly losing the connection to the server.  The problem is only occuring with Exchange email.  My iCloud email works properly as well as a POP3 account.

    No shortage of pre-existing threads on Mavericks mail issues...
    https://discussions.apple.com/message/23706759#23706759
    https://discussions.apple.com/message/23469853#23469853
    https://discussions.apple.com/message/24277596#24277596
    https://discussions.apple.com/message/23769976#23769976
    https://discussions.apple.com/message/19077388#19077388
    https://discussions.apple.com/message/24170482#24170482
    https://discussions.apple.com/message/24483692#24483692

  • Leopard not working with HP Scanner/Printer after upgrading from Tiger?

    Anyone had a similar issue: I can not longer scan things with my HP All in one since the upgrade to Leopard. Is this a coincidence or is there a problem I need to fix. Grateful for any helpful advise, Floor

    van D wrote:
    Anyone had a similar issue: I can not longer scan things with my HP All in one since the upgrade to Leopard. Is this a coincidence or is there a problem I need to fix. Grateful for any helpful advise, Floor
    Unfortunately HP is slow in updating software for Leopard compatibility. If you search this forum you will find some solutions for your problem.
    First, check HP's website for the latest software.
    I believe that uninstalling your current HP software and either reinstalling it or installing more recent software usually solves the problem.
    There was also an issue with Canon scanners.
    Here are a few links to look at:
    http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01234231&cc=us&dlc=e n&lc=en&jumpid=regR1002USEN
    http://forums.macworld.com/message/605773
    http://forums.macosxhints.com/showthread.php?t=80579
    I personally gave up with HP a while ago, while still using PCs. I switched to Epson and both my Epson printers and my Epson scanner work fine with all my computers, PC and Mac. That was my solution.

  • Why does jazzfont not work any more in logic after upgrading the OS to 10.7?

    Hello,
    I was working with the sigler jazzfont in logic studio 9 and everything was fine until some time ago I upgraded my system to OS 10.7.
    Now my score is looking like a piece of graphic art when I use jazzfont:
    I've contacted sigler, they sent me the latest vs. of jazzfont - saying it worked fine with 10.7 in finale... I installed it - no change
    Any chance to get this beautiful note-font back working? (Otherwise apple will have to kill the mentioning in the user-manual... - at least)
    Regards,
    p.

    Hi
    https://discussions.apple.com/thread/4325038?tstart=0
    CCT

  • MakeDimTask2008 is not working in BPC7.5 MS after upgrading from BPC7.0 MS

    Hi
    We have designed a  customized SSIS Package with Make Admin Task 2008. Now this task was working fine in BPC 7.0 MS Version.
    At the time of upgrade we found out that , there are 22 Osoft task in BPC 7.5 MS in comparison with 12 Osoft Task in BPC 7.0 MS.
    When we are trying to run the SSISpackage in BPC 7.5 MS the MAKE DIMTASK 2008 is failing.
    Can anybody throw some light on the same?
    Thanks
    Viv

    Hi,
    In fact, you're right... you'll find 22 tasks to be used in SSIS. But all tasks named with a 2008 at the end are to be used with SQL 2008, and all other tasks are to be used with SQL 2005.
    That being said... the make admin task 2008 dll has probably changed from the 7.0 version. So I would suggest you to register all 2008 tasks again (copy from Websvr/bin to DTS/Tasks directory under MS SQL server) and just drag and drop the new registered tasks on your customized package in BIDS.
    This should work.
    Hope this will help you.
    Kind Regards,
    Patrick

  • Export function not working in Lr 5.3 after upgrade from Lr3.6?

    I've just upgraded to Lr3.6 from Lr5.3 on Windows 7 and am unable to export photos or create smart previews. I'm suspecting the catalog hasn't migrated properly in some way but can't work out why. Can anyone help please?

    JimHess
    I've split it into 4 to make it readable hope this works
    Cheers

Maybe you are looking for

  • Is there a way to create a rule that sends and Auto Response for a shared mailbox?

    I have a shared mailbox set up that receives emails that are sent to 3 different addresses: [email protected] [email protected] [email protected] I would like to create a rule that would send an auto response when someone emails one of these addresse

  • Not finding an IP address

    Hello - im having a problem with my WRT54GS v6 router...! (any help would really be appreciated) Basicly ive had the router about 5 or 6 years and its always worked brilliantly. However I bought a MacBook and when I try to connect to it, its connecti

  • Could not find bridge, and none was specified,

    Starting operation 'Virtual Machine Start' on object '0004fb0000060000a635ac3c095007e4 (DB10g)' Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: start_vm to server: host1.e

  • ITunes 10.4.1. can't update apps, accessing the iTunes store

    Apps indicated to be updated but the process hangs up "Accessing the iTunes Store". Can't update on iPhone or iPad. OSX 10.6.8 JA

  • Oracle secure backup vaulting concept

    hi! i want to work on vaulting.....i just want to know that what is vaulting? why and where do wee need ? plz can anybody help.....actually i want a technical answer....