Touchscree​n problems after Win 8.1 upgrade

Upgraded a HP ENVY Recline 23-k011 TouchSmart All-in-One to Win 8.1, since then touch screen is eratic.  If I do a reboot screen works fine till I use the mouse, then no touchscreen again unless I reboot.  Also if the pc goes into sleep mode, upon return no touchscreen.  Has anybody encountered this or know of a fix ?
Thanks

Hello tayovm,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that since you upgraded to Windows 8.1 your touchscreen has been erratic. I am providing you with a link to the HP ENVY Recline 23-k011 TouchSmart All-in-One Desktop PC Drivers page where I would recommend you download and install the Chipset drivers once again. You may want to refresh all your drivers and software here.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

  • Problems After Win 8.1 Upgrade - Two Additional Partitions Both With Same Volume Serial Number?

    An update from Win 8 Pro to Win 8.1 Pro has occurred automatically on one of my machines.
    Prior to the upgrade (from memory) the machine had an OEM Partition (40MB), EFI System Partition (500MB), Recovery Partition (8.17GB) and OS (C:) partition. Only the latter was visible in Computer.
    After the 8.1 upgrade there are two additional partitions, Recovery (500MB) and Recovery (450MB). All the partitions are now displayed in This PC as drives except the 40MB OEM Partition.
    When viewed in This PC both the two new drives (that appear to equate to the new partitions) show as 499MB each with the same amount of free space. In Disk Management the first new partition is shown as 500MB and the second as 450MB.
    I have SugarSync installed on this machine and since the upgrade it is displaying an error telling me it won't work because the two new drives have the same Volume Serial Numbers.
    Clearly something has gone wrong with the upgrade:
    Is there any way to resolve the Volume Serial Number conflict? 
    Is there any way to stop all these drives appearing in This PC?
    Do I need the two new partitions and if not how can I get rid of them?

    There is a fourth path to upgrading to Windows 8.1 provided by Microsoft. Microsoft have been displaying automated reminders from time to time on Windows 8 computers that Windows 8.1 update is available to download - from these reminders it is possible to
    choose either Install or Not Now.  Just recently these reminders have changed, they are instead notifying the user that the Windows 8.1 Update will be installed automatically or the user has options to postpone the installation for 1hr, 2hrs, etc. The
    user of this computer tells me she went away from the machine and Windows 8.1 update installed automatically from one of these prompts.
    I have seen these installation prompts on several of my customer's computers and they are not malware related (I deal with malware removal every day and would recognise this). However, I have scanned this computer with Bit Defender and MalwareBytes and there
    are no infections present.
    The only difference between this Windows 8.1 Update and the others that I have carried out is that it wasn't controlled and therefore I wasn't able to disable the security software (Bit Defender Internet Security 2015). This may be the cause of the problem.
    I've uploaded the two screenshots you asked for - the two new drives are W: and Z: and SugarSync is reporting that they have the same Volume Serial Numbers. Note: X: and Y: were not visible prior to the upgrade.
    There are two Windows Update logs at C:\Windows\ so I will upload both.

  • Timeouts and connection problems after 5.1(2) upgrade

    AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
    Any known issues with the 5.1(2) that would cause this type of problem?

    I don't know specifically, but I did notice that 5.1(3) was released today.

  • Sound problems after iOS 4.2 upgrade

    Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

    Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

  • Dictation problems after ios 8.2 upgrade

    I rely heavily upon dictation.   2 problems occur (at minimum) after ios 8.2 upgrade to iphone 6. .
    1. I wasnt going to add this dictation bug (feature ;-)) b/c couldnt reproduce the seemingly safari bug when got home, but as I was dictating my first sentence for defect here, it happens in this text box on any line. :-(.
        1. Problem is as soon as dictation types in word Or words, when I hit done, it erases what was just dictated!  Happens on even just ine word. (So having to manually type all of this n I stink at typing ie, time consuming).
        2. I can paste characters from noteoad into here...so must be dictation relateD...it seems.
    2.  In the calendar textbox, when I dictate a new event (doesnt happen in location textbox) and the last character before it fills up the end of textbox (just before the "x"), it automatically does "done" for me (the beep sounds), it stops dictating, but more annoying is it will no longer allow me to continue dictating in that new event's top textbox.  That means I HAVE to type n I stink at that. To reproduce I simply:
    1. press the microphone.
      2. Type in only numerics 1 thru 17....it will dictate to look like this:  123 456-789-1011 1213 1415 1617
      3. "Beep/dong" noise because it hits the end of characters alowed it seems n decides it is "Done".
      4.  press the microphone
       5. "Beep/dong" noise because it wont let you dictate any more of anything said.
    I Couldnt find the entry where google shows someone with what looks like same issue/bug/defect/feature # 2, so entering this.
    I Have warranty but cant figure out how to get phone support for iphone (only mac ...last year).
    I don't seem to have this problem using i notepad in phone when he gets to having to wrap. :-)
    I Have not trieddictation on my mac...yet.
    CAn someone help on these issues please? Thanks!

    Hey Markwoody,
    Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
    First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/ht201559
    How to reset
    - You should reset your device as a last resort and only if you can't restart it.
    - To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    http://support.apple.com/en-us/HT201252
    Thanks,
    Matt M.

  • Satellite P850-31L thinks Intel HD GPU driver is old after Win 8.1 upgrade

    Hi there,
    I have had my Satellite P850-31L since last year and recently updated to windows 8.1.
    This laptop has a NVIDIA GeForce GT 640M graphics card and it use to say that on my dxdiag.
    Since updating to windows 8.1 my laptop seems to think I have a Intel HD Graphics 4000 and apparently it's out of date.
    When I go on their site to test for the update.
    I got told my graphics card is 'up to date' yet every thing else - including my toshiba driver manager says it's out of date.
    I've tried updating yet I keep getting a message saying my system setting aren't good enough.
    Anyne got any suggestions on what i can do.
    Can I get my laptop to stop thinking it has a intel graphics when it has the NVIDEA chip

    > defterniko
    After Windows 8.1 upgrade you should visit the Toshiba EU driver page and should update the drivers and utilities to the Windows 8.1 version.
    Most people forget to do that they update the system from Windows 8 to Win 8.1 but dont update the drivers.
    As mentioned by user IronMan; the installation instruction which is available on the Toshiba EU driver page shows you the driver and tool which needs to be updated and you should also follow the installation order mentioned in this instruction.

  • HT5037 problems after using iPhoto library upgrader

    i can't open iPhoto library after using iPhoto library upgrader for a disk with a few pictures from an old iPhoto library on it. please help

    did you execture the library upgrader (in the APplications folder ==> utilities double click on it)? What exact problem are you haveing?
    LN

  • Cannot get to dual-boot screen after Win 8.1 upgrade

    Hello,
    I have an iMac with Mavericks. Recently installed Win 8 to dual-boot. Instrux then were to hold OPT button during startup to be presented with options for OS with which to boot.
    Since Win 8.1 upgrade there is no way to get to that prompt. MS/Win help topics not useful (unsurprisingly). I have the original install disk but would far prefer to save my current config of Mav. Thoughts for workaround?
    Cheers,
    Michael C

    holding down option key at bootup not giving you the bootmenu have nothing to do with win8.1
    even if one never installed anything in terms bootcamp at all then holding down the option key should give the option between osx and the restore to last clean osx version
    if you don't get the option then I'd say the cause is not windows as the menu is handled by the bootloader which is before windows takes over

  • Safari problems after 10.10.3 upgrade

    I am unable to search anything in Safari after 10.10.3 upgrade.

    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Safari > Preferences > Extensions
        Turn off Extensions if any and launch Safari again to test.
        Turn on those one by one and test.

  • After Win 8.1 upgrade, Acrobat 9 Pro suddenly won't run

    I have Web Premium CS4, and Acrobat Pro v. 9.5.5.  I bought a new  Window 8.0 computer 90 days ago, installed the suite, activated, and everything ran fine. Yesterday, I upgraded to Win 8.1. Now, when I open Acrobat Pro, I get a pop-up message saying that it was installed as part of a suite, and to open another program in the suite first. When I click OK, Acrobat closes. I have tried opening nearly every other program in the suite (Bridge, Flash, Photoshop 64-bit), they run OK, but Acrobat will still not run, and there are no activation messages.  I checked my Adobe account, and my version of Acrobat Pro 9 is still listed, with serial number.
    I'm very disappointed, as I use Acrobat Pro quite a bit, and currently it will not stay open at all. Other than telephoning Adobe for help (no free support # listed), or using on-line chat (no link available), or e-mailing them (no address listed)...what can I do to "activate" it?
    I've tried opening Acrobat Distiller and get the same message, but when I close it, I see a brief flash of what appears to be an input box with activation stuff.  It only appears for half-a-second, so I cannot do anything with it.

    Bill, thanks for that info. I don't think I would ever expect to get any support from Adobe on these programs, since I stopped buying revisions after CS4. I was surprised that I was even able to successfully install the CS4 Web suite onto Win 8.0, and Win 8.1 probably adds another couple hundred million lines of redundant code from our friends in Bill Gates-Land.
    However, my A-Pro9 problem did resolve unexpectedly!  I tried opening all the suite's programs, one at a time, and then Acrobat, with no luck. Then I realized that the suite had installed both 64-bit and 32-bit versions of Photoshop (I use the 64-bit version) onto my new 64-bit computer.  So, when I opened the *32-bit Photoshop* for a minute, closed it, and re-opened Acrobat 9, it went back to working normally.  I'll take it! 
    --Eugene

  • Can't Create USB Recovery Drive after Win 8.1 upgrade on Lenovo Twist

    After upgrading to Win 8.1 and trying to create the usb recovery drive, I get this error:
    "We can't create a reccovery drive on this PC. Some required files are missing.To trouble shoot problems when your PC starts,use your window installation disk or media"
    Can some give me a hint as to how to solve this?Thx.
    Solved!
    Go to Solution.

    I contacted Lenovo who sent me out a set of 4 Recovery disks. These disks fixed the problem but it meant wiping out the hard drive and reinstalling very thing from scratch. A new recovery partition is created and the discs reinstalled Win 8 which had to be updated. Then Win 8.1 could be installed. Everything is now working as it should.

  • Split X2 after Win 8.1 upgrade shuts down after 5 minutes and has to be hard booted to start up

    This has become extremely annoying. I upgraded to Win 8.1 after I bought the X2 just before Christmas. if I leave the X2 for just a few minutes, it will either go into sleep mode or just completely shut down (no way to know which it will do and how long it will take). In any event, it has to be "hard booted", in the sleep case, holding the on/off button down until it shuts off and then restarting, in the "just off" case, just pressing the on/off button to start it again.
    In either case, tons of crap regarding all of the applications - Explorer, Word, Excel, Chrome, Outlook, that had to be shut down (unexpectedly).
    I did not change the power scheme and it has been reset (probably more than once) to try and correct the problem.
    Thanks for anyone that can help me solve this really annoying problem.

    Hi SSteveX2,
    Welcome to the HP Forums! I can imagine that would be a frustrating with the random shutdowns. How long do you have it set before it goes to sleep? There are a couple of things to check. Start by running a System File Check to see if encounters any corrupt files. Another option is the using the HP Diagnostic Tools to see if it discovers any issues with your hardware. Run the System Test – Extensive Test.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • After Win 8.1 upgrade, NCB, NLS, BITS fail to start, other corruption?

    Recent Win 8.0 pro just upgraded to 8.1 through store.  After upgrade, a number of things don't work, suggesting corruption.
    Event 7023 
    The Network Connection Broker service terminated with the following error: 
    Network Connection Broker is not a valid Win32 application.
    Event 7023 
    The Network List Service service terminated with the following error: 
    Network List Service is not a valid Win32 application.
    Chrome to google won't accept the certificate, suggesting root certificate file corruption.
    trying to manually run windows update, three updates are selected, but trying to download them hangs. 
    Event 16392
    The BITS service failed to start.  Error 0x80040154.
    How do I re-run upgrade or otherwise recover?
    thx
    -dB

    Finally getting back to this.  SFC is unable to correct several hundred files with errors such as
    2013-11-29 14:18:57, Info                  CSI    0000009a Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-computer-name-ui_31bf3856ad364e35_6.3.9600.16384_none_fec58799c27a34d6\netid.dll
    do not match actual file [l:18{9}]"netid.dll" :
    2013-11-29 14:18:57, Info                  CSI    0000009b [SR] Cannot repair member file [l:18{9}]"netid.dll" of Microsoft-Windows-Computer-Name-UI, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64
    (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2013-11-29 14:19:02, Info                  CSI    000000ae Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-computer-name-ui_31bf3856ad364e35_6.3.9600.16384_none_fec58799c27a34d6\netid.dll
    do not match actual file [l:18{9}]"netid.dll" :
    Among the major problems is being unable to get updates, because BITS won't start:
    The server {4991D34B-80A1-4291-83B6-3328366B9097} did not register with DCOM within the required timeout.
    The Background Intelligent Transfer Service service terminated with the following service-specific error: 
    Class not registered
    The BITS service failed to start.  Error 0x80040154.
    I'd really like to do a refresh of 8.1, or re-run the update from 8.0.   How to do either?
    thx
    -dB

  • 8350i Sprint-Nextel problems after OS 5.0 upgrade

    1. Keyboard lock icon gone.  Function now works via "MUTE" key.
    2. Some application shortcuts no longer work ("protocol not supported - type in a different url" is the message). Unresolved - no solution found.
    3. No matter what notifier or downloaded song I pick as the SMS or MMS message alert, alert rings as "notifier-crystal" even though something else appears on the ring tone line.  Unresolved - no solution found.
    4. Text message problem (before and after upgrade) - MMS/SMS messages not being received (intermittent).  Only way I know its happening is if I try to send a text and get a red "x" or friends call me and ask why I haven't responded to their texts.  Simple solution - turn unit off then on (battery pull not needed).  Then text messages start pouring in.  Work OK for a while then they stop again.  Tech assistance did some over-the-air resets and made me change/verify some settings.  Did not work.  I find myself turning phone off and on several times daily as a band-aid solution.  Sometimes occurs with emails too.  Very annoying.

    Welcome to the forums
    OS 5.0 isn't official yet so you may face bugs/issues with it. Other than that, I can suggest a battery pull and resending your service books from the BIS site.
    Cheers,
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • Problems after iOS 4.2 upgrade.

    Hello everyone, hope you are all well.
    Could use some help to restore my 2G Touch after upgrading it to 4.2 the other day. During the upgrade, all it`s music and all the app`s were lost, but after re-synching only the music and the original factory app`s returned. None of my downloaded app`s ( paid for and free )returned.
    Several e-mails to Apple support and trying their fixes have not solved the problem.
    Any idea`s?. Cheers, Pete.

    After you re-download any App, you probably need to turn the check-mark (for Syncing) back on for each of those Apps.
    Connect iPod and while it is Syncing, look on Device/Apps and after making sure *Sync Apps* is ticked on, look at each individual app on the list below the *Sync Apps* box and make sure they all have a tick in their box.
    By the time you've made any changes here, the Sync may have gone past Apps or even finished completely, so you need to Sync or Apply after your change.
    Phil
    Message was edited by: the fiend

Maybe you are looking for