Touchscreen - Does a utility to test or calibrate the touchscreen exist?

See title.
Even a simple program to draw a crosshair on the iPad screen where the computer thinks contact was made would be useful.
Thanks, Don

None that I am aware of.

Similar Messages

What "ethernet port" does airport utility use for "remote administration"

I have a friend who was recently evangelized to Macs and bought a Macbook Pro and an Apple Airport Extreme (gigabit) Router, hereinafter called AE. The place where he lives has cable modem internet access and an older Linksys wireless-G router for the building, and I am trying to configure his new AE, prior to making it the primary router in the network (e.g. connected to the cable modem).
When the AE is completely configured the Linksys will be retired.
I remotely manage and maintain the network and some other computers in that house. The Linksys is configured for Remote Administration so I can manage it. I manage several PC's and Macs using Timbuktu Pro 8, with the necessary ports forwarded through to TB2 on those machines.
I am trying to configure the Airport so it also can be managed remotely, so from a workstation on that network (accessed from where I am using TB2) and running Airport Utility, I have checked "Allow setup over WAN" on the Airport/BaseStation page. Now I would like to test whether I can connect and remotely administer that Airport Extreme from Airport Utility on my Mac.
I assume that, if I can rout packets from my Airport Utility here through the internet to the public IP of the Linksys router there, I should be able to connect. But I can't.
My setup is this. The target AE has its WAN port connected to an ethernet port on the Linksys, as is the LAN in the remote building. Nothing is connected to the AE's ethernet ports at this time. The Linksys is the DHCP server, and the AE has an IP from it, as does all the other ethernet- and wireless-connected computers, printers, etc. The AE's wireless is active and the wireless-connected devices in the building can connect to either its base station or to that of the Linksys. When the Linksys is retired the AE will be the only wireless in the building.
I attempt to connect in the following way: On my Mac, I run Airport Utility. From the file menu I select "Configure other" and enter the public IP address of the remote Linksys, and give AE's password. There is a long wait
Reading the Airport wireless device configuration....
while Airport Utility tried to discover AE, and then
An error occurred while reading the configuration..... (-6753)
I suspect that my remote connection problem is due to the fact that the AE is behind the Linksys, and the proper port forwarding is not in place on it to pass the Airport Utility's packets through to the Wan port of the AE. This might be that I have not entered into the Linksys the correct port number to forward on to the AE. I've tried the three numbers in the list:
"Well known TCP and UDP ports used by Apple software products" found at
http://support.apple.com/kb/ts1629
that are mentioned as possibly being involved with Airport Utility; 192, 4500 and 5009.
Advice will be appreciated.
Bob

One example, and there may be others, is the (free) DynDNS dynamic DNS service which publishes a domain name for the WAN port of your router which can then be resolved, like all other domain names, to the actual IP address of the WAn port of your router. This service provides a solution to the problem of having a proper domain name in cases where your public IP address changes over time. Unless you pay for a static IP address, virtually all ISPs change your public IP address over time.
So, you can register for a free DynDNS account at www.dyndns.com and that is how you come up with the User: and Password: information; use whatever User and Password you register at dyndns.com with.
The first part of the hostname you can define as you wish, subject only to someone else having used it previously, and the remaining parts of the domain name might be "dyndns.org" or one of the other domain names provided by the DynDNS service. So, you could publish, via DynDNS, the name of your public IP address as, for example, joehlam.dyndns.org however you might want something less descriptive or more vague.

How does disk utility decide which optical drive to use for burn?

This is a somewhat daft question and purely out of interest.
How does disk utility decide which optical drive bay to open for burning?
I have two drives in a MacPro and both have the same capabilities (DVD-RW). Why does it sometimes open the lower one, and sometimes the top one?

Grant Bennet-Alder wrote:
The estimate is based on how long it already took to do how many blocks, and how many blocks are left to do. If you told it to overwrite 35 times, it will be a long, long time before it completes.
The estimate is made grossly large by the presence of Bad Blocks that need to be Read during the test (not the case with Erase and Write Zeroes).
Each Block is written with some redundancy bits, so that small errors can be corrected on reading. A Bad Block causes the drive to re-read. and re-read, and re-read, in hopes of getting correctable data the next time. This should NOT be an issue in writing. But if the drive stops responding (which can and does happen with a bad drive) the Erase function will just sit there, thinking it is making progress, and stretching out the time.
Thanks, Grant.
If I read your reply correctly, Erase and Zero Out free space shouldn't elongate the process, because there's no read occurring.
The drive will not be Mounted while Disk Utility works on it, so it will not be on the Desktop. But ask Apple System Profiler \[ About this Mac > More Info > Serial ATA ] if the drive is still THERE . If it cannot be seen, you have your answer -- the drive dropped out of sight while being tested -- Bad Drive.
Well, now I am confused. It's a FW800 drive. It's on the Desktop. And it appears under FireWire in System Profiler. AND Disk Utility shows a mount point. But the Unmount and Eject buttons are grayed out.
Will the drive be mounted if it fails to respond to Disk Utility? That doesn't seem to make sense.
How do I determine its status? It appears to be stuck at "1 day, 5 hours" but it'll take an hour for that to change. I think it's been that long since I first noticed the time.
Harv

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
tracking down the cause of the flakiness can be tricky ... as you already know ...
just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

HT3204 When doing a "Network Connectivity Test" on my PC, as to iStore Connectivity, it says "Secure Link to iTunes Store failed". And when trying to "authorize" my computer to sync ringtones I downloaded to my PC, I keep getting an errot message.

When doing a "Network Connectivity Test" on my PC, while in iTunes, it tells me that "Secure Link to iTunes Store Failed", yet I'm connected to the internet. I was unable to "authorize" my PC with an error message, as well, giving me the code (-3212), saying I was not connected to the internet, yet I am. I can open browser after browser, and navigate just fine. In going through the iTunes Help menu, I am running the tests offered in the drop-downs, but I keep getting the afore-mentioned errors.

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Why does airport utility appear off center?

Why does airport utility appear off center on my iPad and laptop screen?

Because Apple's QA is sorely lacking.
give them feedback https://www.apple.com/feedback/airportextreme.html

This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.

when i am going to Install 11gR2 then thsi error shows how to solve it plz give me guidance
This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Expected Value: 1023
Actual Value: 0

HELLO iSHAN SHAH
JUST EXPLAIN US YOUR PROBLEM IN DEPTH.
TELL US YOUR HARDWARE AND SOFTWARE CONFIGURATION.
ALSO TELL US IN WHICH STEP OF INSTALLATION , THIS ERROR RAISED.
THANKS
HARSH SHAH

HP printer does not show up as part of the neighborhood in printer utility

Hi Everybody -- I am trying to connect to a shared HP printer connected on my XP machine. It works fine when trying to connect to it from other pc's, however, when ever i try to connect to it from my MAC, the pc name and printer does not show up as part of the neighborhood in the printer setup utility (which is weird).
I do have the drivers installed for that particular printer and it works fine with USB connection (HP6110). I know this is not a firewall issue becuase I tried connecting to the printer while disabling the firewall.
Appreciate any help on this matter.

Look over the printer sharing articles on iFelix Tech Notes.
In addition, check the Mac's System Preferences> Sharing> Firewall tab> Advanced button and uncheck 'block unwanted UDP traffic' and "enable stealth mode". On the WinXP computer, go to Control Panels> Administrative Tools> Services and set 'Computer Browser' to manual from automatic.

Does anyone recommend a good graphic utility to prepare files for the web?

Does anyone recommend a good graphic utility to prepare files for the web?

GraphicConverter as noted by Don, or Photoshop Elements are the favourites. Both will allow comprehensive editing, and save for web facilities including reducing the .jpg quality to shrink file size without making the picture smaller.
There is a free application calld Gimp (open source) but I don't know how good it is or whether it's updated for Lion.

Can i re calibrate the touch screen for my iPod 4th gen without use of the touchscreen?

can i re calibrate the touch screen for my iPod 4th gen without use of the touchscreen? via CPU or other devices?

There is no way to calibrate the touchscreen.
Just what problem are you trying to solve?

Does disk utility repair delete any files on external hard drive?

Does disk utility repair disk delete any files on the external hard drive?

diskutil list
Last login: Sun Dec 21 16:07:46 on console
Justins-MacBook-Pro:~ justinmontoya$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         749.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *748.9 GB   disk1
                                 Logical Volume on disk0s2
                                 4A646B29-3794-4A34-AC98-C0FB505D402B
                                 Unlocked Encrypted
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *500.1 GB   disk2
   1:                 DOS_FAT_32 500HDD WD               500.1 GB   disk2s1
Justins-MacBook-Pro:~ justinmontoya$

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...)

''duplicate of https://support.mozilla.com/en-US/questions/905881''
Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...)

Hi Kossa,
You can also check if the issue occurs in
Clean Boot. If the issue disappears in the Clean Boot environment, you can continue to narrow down which entry is causing the issue.
Besides, uninstall it and re-download
a fresh copy of FireFox to check the result. If the issue still exists, create a new user account to see if it occurs.
If the issue persists, you can contact Mozilla Support directly and use Internet Explorer (IE) during the time.
J
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise,
regarding this product's performance or reliability.
Regards,
Linda

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

Hi O_H_I_O,
Have you got an error code ?
Considering it is a brand new machine ,please update the machines .To get a better performance of the machines ,we should always keep it up to date .
There is a possibility that the DVD/CD-ROm drives driver is old or has corrupted .Please open the device manager , update or reinstall the driver to have a check.
Apart from this ,we can run the built-in tool to a diagnostic :
Control Panel\All Control Panel Items\Troubleshooting\All Categories\Hardware and Devices
We also can run the following fixit tool to have a check.
Fix problems with CD or DVD drives that can’t read or write media
http://support.microsoft.com/mats/cd_dvd_drive_problems
Best regards

Screen saver does not turn on. Have run the disc utility to repair disc permissions. Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

screen saver does not turn on. Have run the disc utility to repair disc permissions. Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
I am running 10.9.1 software
Help Diggs1936

I would try reinstalling.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Replace powersave with pm-utils from Testing?

Okay, must ask... Would this be wise? Does pm-utils support all the stuff powersave does, e.g. laptop mode, out of the box? Powersaved is working fine for me so I'm a bit weary of switching over.

I see why it is better but I don't know how to configure it, really...
Right now, the network daemon isn't working after a suspend. But if I stop it after a suspend, restart it, stop it AGAIN and start it AGAIN it suddenly works.
I looked into the pm-suspend.log but that didn't help much (well, at least I figured out that pm-utils doesn't restart the network service ).
With powersave I could just edit the "sleep" file to indicate which daemons had to be restarted, but I cannot find that with the pm-utils...
Anyone able to help me
(If that should better be in a seperate thread then say it )

Touchscreen - Does a utility to test or calibrate the touchscreen exist?

Similar Messages

Maybe you are looking for