Touchscreen issues after Amber update

I have never had an issue with my Lumia 928 before the Amber update.  Now my screen goes unresponsive about every other day, and I have to do a reset.  Is anyone else having this issue?

Hi gymcoach10,
Welcome to the Nokia Support Discussions!
Sorry to hear that. You said that you've done a reset, may we know how did you do it? Did you press and hold the volume down and the power keys until the phone vibrates? Or did you reset it by going to Settings>about>Reset?

Similar Messages

  • Is there a fix for the wifi connectivity issue after ios6 update?

    Is there a fix for the wifi connectivity issue after ios6 update?
    Cannot connect to any wifi since update to 6.0.1
    How do I get update to 6.0.2?
    Will that even help?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Date format Issue after HRSP Update

    Hi,
    We are faced with a strange issue after HRSP update was applied on our client system (upgraded from SAP-KE-30 to SAP-KE-36).
    There is an outgoing interface which picks up all the the starters into the local government pension scheme and updates a B2A document. This is implemented via a z-program.
    When we look at the out put after the interface has run for the  vast majority of employees it shows their date of birth as 21.05.1968 when it should show it as 21051968. This only appears to have happen after the HRSP's have been applied.
    No modifications have been made to the z-program. What could be the reason for this issue. has anyone faced such an issue post HRSP update?
    Any pointers on how to further investigate and resolve the issue will be most helpful.
    Regards

    Hello Iside,
    In this case we can try to reload the software on the BlackBerry Smartphone to make sure it is running the latest version and there are no issues with the OS on the device.
    To do this we would need to back up the BlackBerry Smartphone. Please open the BlackBerry Desktop Manager and connect your device. Click on the Backup and Restore options and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry Smartphone.
    Once you have backed up your BlackBerry Smartphone please follow the link below to complete a clean reload of the BlackBerry Smartphone software.
    Link: http://www.blackberry.com/btsc/KB11320
    Please test the date once the software is reloaded prior to restoring the backup.
    Thank you
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Doc to go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro

    Doc To Go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro (15-inch Late 2011), Mac OS X (10.7.5), ipad iOS 6.0

    Post in the iPad forum, this one is for OSX

  • Exchange 2010 - Issues after rollup update installation.

    Exchange 2010 - Issues after rollup update installation.
    We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
    Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
    An unexpected error occurred and your request couldn't be handled. and
    Your network connection is unavailable. Please reconnect and try again.
    Issue2 - When I open the Exchange Management Shell I get the following error:
    Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
    Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
    hope that it will be fixed after resolving issues 1 and 2.
    We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
    Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
    Please help.
    Thanks.
    Greg

    Hi,
    Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
    "An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
    For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
    Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Elite Pro, CMSS-3D not working and other issues after driver update

    DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
    The only time it works is if the original drivers are installed from the installation CD.
    ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
    Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
    Now regardless of what drivers are installed, there?are no longer any on screen indicators.
    The indicators looked like the ones that show when using the remote controller.
    Anyone have any ideas?

    Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
    http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
    http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
    http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
    http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
    http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
    http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
    http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
    http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
    http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
    http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
    http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
    http://rapidshare.com/files/25244022/[email protected]7.254.6.0

  • Touchscreen Problems after Lollipop Update

    Hello everyone, I remember that within the past year, there were maybe 5 occasions in which my Xperia Z touchscreen wouldn't react. After turning the screen off and on again, it would be fine again. Since the Lollipop update, this issue occurs 90% of the time. When I turn the screen on, the touch input doesn't work at all. Sometimes, it will start working after I turn the screen off and on several times. Somtimes a full restart of the phone does the trick. However, once the touch input is working, it works perfectly as long as the screen stays on. Is this behaviour typical for a hardware defect and the occurrence after the update is just coincidence? (which, for me, would be somewhat hard to believe...) Or is there anything on the software side that I should do/try? Many thanks and best regards, Philipp

    Please read my previous posts and see why I’m very unhappy with “my” Sony.http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/Reboot-loop-in-Xperia-ZL-after-update-to-Lollipop/m-p/993700#M57879http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/Reboot-loop-in-Xperia-ZL-after-update-to-Lollipop/td-p/992453/page/3http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/Reboot-loop-in-Xperia-ZL-after-update-to-Lollipop/m-p/997325#M58418 I think that Sony is behind the faults in the systems, because they noticed that many of their users do not live in the country where they bought their phone. Sony wasn't happy that people shop globally, losing market share in the country they live in today. The decision to mess up these smartphones during an update is easy - they know your IMEI. I find it hard to believe a global company would be so desperate to try to sell new smartphones, to gain market share. Yet, it appears to be the case, even for customers who bought a phone in the country they live in, apparently a parallel imported one. The fact Sony only uses PCC and abandoned SUS (Update service) - where downgrades were possible – in July 2014 only enhances that impression. The lack of support from Sony adds to the conclusion that Sony is unethically blocking smartphones.   Sign in via my link to change this: https://secure.avaaz.org/en/petition/Sony_Mobile_Division_Sony_solve_the_problems_with_updates_that_block_foreign_smartphones/?ejpryjb

  • Problem with my Lumia 928... started after Amber update.

    First, I to state that I love my Lumia 928 and the Windows Phone 8 OS. Second, I've been a Third-Party Microsoft developer for over 14 years and just started developing for Windows 8 and Windows Phone 8. So, I'm not a normal consumer but one that will try everything in my toolbox before asking for help or even writing posts like this.
    History:
    As of October 6, 2013, Verizon is sending me a new phone (not guaranteed to be new. ) to see if that fixes the issue
    Used for work and personal emails so I can't just go and do a "hard" reset without have extreme headaches.Last resort before I get my "new" phone, I've broken down and started doing a "hard" reset (actually this is my second time).
    No damage to the phone (Verizon employee has confirmed these, hence the new replacement)
    No cracked screen
    No frame cracked
    No water damage
    Shortly after the Amber update, I started having problems. In order of oldest issue first.
    Lock upsRandom apps just freeze. No rhyme or reason. No pattern. Just all over the board.
    No touch responseSide buttons work but that does be no good when I can't select anything on the screen. Solution, "soft" reset and things are good... for a while.
    Phone call speakerStarted losing phone calls. Thought it was a signal issue until I noticed that the call were not actually dropped. Speaker just started cutting in and out (completely) and sometimes it would just dim to almost nothing and then come back.
    Microsoft account
    This is new as of October 5, 2013
    October 4, 2013, nothing was wrong. Then the next day, my Live account associated with my phone stopped working. Keeps saying "Not up to-date". Had to create another account to get my emails. As of today, it's still not working. Unfortunately, I didn't write down the error code so I can't post that here.
    Is anyone else experiencing these issues after the Amber update and if so, what did you do to resolve it (if you did)?
    Thanks,
    Stu

    The Amber update came to our Lumia 928 and we had just activated it like one or two weeks prior, so we were just getting to know the phone.  In answer to your difficulties following the Amber update:
    millerstu wrote:
    Shortly after the Amber update, I started having problems. In order of oldest issue first.
    Lock upsRandom apps just freeze. No rhyme or reason. No pattern. Just all over the board.  The only "freeze" or app problem I recall is the GREEN SCREEN when opening the camera, happened once, and a power off and restart fixed it.  The problem has not come back, to date (this was several weeks ago).
    No touch responseSide buttons work but that does be no good when I can't select anything on the screen. Solution, "soft" reset and things are good... for a while.  I have heard of this happening to others, but I have not personally experienced the screen freeze issue. 
    Phone call speakerStarted losing phone calls. Thought it was a signal issue until I noticed that the call were not actually dropped. Speaker just started cutting in and out (completely) and sometimes it would just dim to almost nothing and then come back. I've had this happen on a couple of calls - the caller becomes very garbled and static filled.  I've had to hang upand call back - and they say the same thing happens on  their end, my voice is all garbled, like I'm underwater or something.  Not all calls, and not frequently, but maybe once every couple of weeks.
    Microsoft account
    This is new as of October 5, 2013
    October 4, 2013, nothing was wrong. Then the next day, my Live account associated with my phone stopped working. Keeps saying "Not up to-date". Had to create another account to get my emails. As of today, it's still not working. Unfortunately, I didn't write down the error code so I can't post that here. This has not happened, to date, for me.
    My screen is cracked due to a drop, prior to the Amber update.  (Yeah, it was nearly brand new when I dropped it   )  That doesn't seem to affect the overall function of the phone though. 
    So, to sum, I am experiencing some of the issues you described, but I'm not sure it's Amber, maybe just the phone design itself.  I don't know that a "new" phone will resolve things either.  Please do keep us posted...

  • 4G option missing on Lumia 820 after Amber update

    Hi
    I bought Lumia 820 from singapore (Starhub variant), it was SIM-unlock can use any SIM. i came back to my country Bangladesh. it was working like a power house. i'm ok with the performance. later i faced one power problem issue. i took my handset to Nokia Service center. they fixed the problem as we ll as update my firmware to amber update (which i didnt request to do for Nokia care official. they did it by their own), it was working good, all new feature data sense, sms call block, nokia smart cam, radio etc. every things works fine but i found 4G option is not available in the data selection mode. only 2G & 3G is available. later i checked in nokia web site and found the FW version is for bangladesh only. my question is the FW blocked the 4G option due to no 4G service provider or any other issue. i chose 820 only for LTE option because i traveled a lot to SGP and KL for business purpose and their is 4G service available.
    again yesterday my phone got restarted automatically after that i can not sync google contact (only) and my SMS+Call Block option is wiped from the settings menu.
    can any one suggest how i can solve this without going to Nokia Care center because local nokia care center service is not good enough to deal with. if no one is available answer my question than i need to visit NOKIA CARE center.
    thanks and welcoming expert opinion from expert/pro users.
    cheers
    Sayeed

    hi mate,
    if the 4G option was initially present on the phone when you bought it from Singapore, it appears that your local Nokia Care point has flashed the Amber update for your local region (Bangladesh). as LTE services are not widely available in your country, as you have rightly said, 4G is not present in the options.
    unfortunately in this case, there is nothing you can do except to go back to Nokia Care and tell them to put the initial firmware (w/Amber, mind you) back onto your device as that was why you bought the device (to use 4G services).

  • Issues after the update from 2.5.7 to 2.5.16

    A number of issues have cropped up due to / during / after the update of the forums from 2.5.7 to 2.5.16 at the beginning of this week. This is a list of those issues as I have compiled them. It is a work in progress and I will update it when more information becomes available.
    1 Username and email problems for some users. (fixed 2009-12-03)
    Some users have a suffix appended to their username and their email address replaced with a random string (as a consequence email notifications don't work anymore). This problem is being worked on. Time to fix is unknown. Users experiencing this problem are requested to report so in this thread: My user handle and e-mail have been changed without my knowledge Please include your old username, which Adobe ID's you have and whether you used the same email address for those Adobe IDs.
    2 Some user preferences are lost when logging in. (fixed 2009-12-03)
    When you log in to the forums (either manually or automatially based on a "Remember me" cookie), some of your preferences are overwritten by their default values. The most noiceable prference is the settng to display your screen name (real name) that will get reset to displaying a username. This problem is being worked on. Time to fix is unknown.
    3 The Rich Text Editor (RTE) is inserting linebreaks.
    When typing a post the RTE will randomly insert linebreaks.
    Workaround: remove the linebreaks manually.
    4 Raw (FreeMarker?) code is inserted in some posts (through the RTE?).
    In some posts code appears that was not entered by the user. The code looks something like below (but there may be much more then just this one line):
    function(){return A.apply(null,[this].concat($A(arguments)))}
    Workaround: edit the post and remove the code.
    5 The logout button disappeared.
    The logout button is no longer visible.
    Workaround: How can I log out from the forums?
    6 Search is down on one node. (fixed 2009-12-03)
    Search is down on the SGAURWA41P cluster node. This does not show itself as an error, but instead as 0 search results.
    Workaround: restart all browser windows and you may end up on another cluster node or use Google with a "site:forums.adobe.com" search modifier.
    7 Users have 404 problems on first request.
    This is not really a new problem, but it is something that was supposed to be fixed with the update. The problem is caused by the forums inserting a jsessionid parameter in the wrong place in the URL.
    Workaround: reload the page where the incorrect link is located.
    8 Image upload through camera button doesn't always work. (fixed 2009-11-30)
    Some people have reported problems with uploading JPG and PNG images using the camera icon.
    Workaround: attach the images instead.
    Update 2009-11-28:
    A probable cause for the error [The content type of this image is not allowed.] when uploading images through the camera button has been identified. Internet Explorer uploads images using a Content-Type header that differs from the IANA registered type for jpg and png images. As such, the recommended workaround for people wanting to upload images using the camera icon is to use a browser that is not Internet Explorer.

    Re issue 4, "Raw (FreeMarker?) code is inserted in some posts (through the RTE?)", the suggested workaround is:
    Workaround: edit the post and remove the code.
    With my IE 8, the workaround never works.  See this test post for an example:
    http://forums.adobe.com/message/2470219

  • Xperia arc S LT18i - contact issues after ICS update

    I've encountered an ICS problem regarding contacts. Contact search field is not functioning well when searching for a specific name..i found this problem while trying to text somebody. Contact search field wasn't accurate at all after ICS update...

    Can you please elaborate on this issue? What exactly do you get when you start typing out a contact name?
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Wireless issues after kernel update

    Hi,
    after I updated my kernel yesterday, I've been having some issues with my wireless. I'm on a dell inspiron 1545, using kde and I use the broadcom-wl driver form the AUR.
    Anyways. After I did a system update yesterday, it would refuse to load the wl module. So I recompiled the driver and that was fine. But still my laptop refuses to use its wireless card. At first I just couldn't connect to any wireless, now the networkmanager just claims that my WLAN Interface is unavailable.
    the output of iwconfig:
    lo no wireless extensions.
    eth0 IEEE 802.11bg ESSID:"" Nickname:""
    Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
    Bit Rate:54 Mb/s Tx-Power:off
    Retry min limit:7 RTS thr:off Fragment thr:off
    Power Managementmode:All packets received
    Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    eth1 no wireless extensions.
    but if I try to run 'iwlist eth0 scan' it states:
    eth0 Failed to read scan data : Invalid argument
    I'm not that experienced with wireless, so I did what https://wiki.archlinux.org/index.php/Broadcom_BCM43XX says and some other pages I found on google. 'iwconfig eth0 up' doesn't have any influence.
    As I said, before the upgrade it worked fine and I also had configured it as it is described in the link above.
    thanks for any inputs,
    tobi

    litemotiv: 'lspci | grep Network' :
    0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
    .:B:. : I guess (and hope) that's the only relevant part (at the top and bottom):
    at the bottom what's that "wl taints kernel"
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    lib80211_crypt: registered algorithm 'TKIP'
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
    uhci_hcd: USB Universal Host Controller Interface driver
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    ACPI: acpi_idle registered with cpuidle
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    ACPI: Power Button [PBTN]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SBTN]
    ACPI: AC Adapter [AC] (off-line)
    Monitor-Mwait will be used to enter C-1 state
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    Monitor-Mwait will be used to enter C-2 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    wmi: Mapper loaded
    uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    wl: module license 'Mixed/Proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    wl 0000:0c:00.0: setting latency timer to 64
    usb 1-5: new high speed USB device using ehci_hcd and address 2
    atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
    eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
    thermal LNXTHERM:00: registered as thermal_zone0
    and maybe
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    start_kdeinit (3367): /proc/3367/oom_adj is deprecated, please use /proc/3367/oom_score_adj instead.
    sky2 0000:09:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control rx
    ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
    eth1: no IPv6 routers present
    tobi

  • [Solved] Overheating/fan/sensors issues after kernel updates

    Hi all,
    I realise there has been a bit of correspondence on this already.  I'm after some advice for my specific situation:
    1. My laptop is an acer aspire 5315.  I has well understood overheating issues that arrise due to BIOS problems
    2. Fan control and temperature reporting worked perfectly with kernel 2.6.30, stopped working with 2.6.31 - I assume due to the well documented changes made in that release.  The temperature only seems to be read once - at boot.  sensors never reports a change after that; if the temperature is cold at boot the fan never get switched on.  Unfortunately this happens most often.
    3. I tried setting the recommended kernel option (can't relocate the post now).  It didn't help :-?
    4. I have tried upgrading the BIOS but the distribution from acer is a windows executable (won't run under freeDOS) and I do not have windows installed on this PC (not game to try under wine).
    5. I re-installed the old kernel from my pacman cache only to find that my wireless no longer works (fan works just fine though).
    I'm now totally stumped :-/
    I'd like to update my bios and go with the latest kernel but can't see a way without installing windows.
    This might be fixed in an ubuntu kernel release (https://bugs.launchpad.net/ubuntu/+sour … bug/453700) but I'd prefer not to do that switch... perhaps the same fix is coming to arch?
    I'd accept having to pin the kernel to an earlier version but neet to get the wireless working.
    help...
    edit: 
    I've now managed to get the kernel backdated correctly (so that wireless works as well as the fan) by re-installing the kernel and firmware together.
    Have configured pacman to igmore future kernel updates
    If anyone has any suggestions on howto update my bios I'd be very greatful.
    Last edited by drandre (2009-11-06 13:26:46)

    Hi,
    Got exactly the same issue, after running for a while laptop justs goes off... going to try to regress kernel until issue is resolved
    BIOS update does sound a bit extreme
    MrG

  • Permissions Issues after java update...

    So, I noticed after I got the java update awhile back that the permissions associated with it are wrong.
    disk utility tries to repair it, claims it does, but still needs to be repaired afterwards. anybody else have this issue, so would it be normal?
    I can post the output from disk utility if you guys need it.

    It's normal. Not all permissions issues are ever resolved with any update. Unfortunately ever since 10.1.5 had permissions repair features, it never has 100% eradicated permissions issues. Though repairing permissions before and after each update helps, you'll never see a message that all permissions are repaired. As long as there aren't any other issues, I wouldn't worry about it.
    Message was edited by: a brody

  • MAJOR Wireless, Safari, Dock & Finder issues after latest updates

    I'm having major issues after the latest AirPort, Security Fix and Safari updates in 10.5.2: Safari keeps crashing every hour, Wireless connections time out and Airport occasionally crashes when I try to turn it off/on. Sometimes the systems gets stalled and has lag - I'm not sure if Safari crashing is causing this or it's the system that causes Safari to freeze and crash - often the dock becomes unresponsive too and makes me force shutdown and reboot. I've had to reboot like this more than 4 times today, something isn't right. My questions, therefore:
    1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
    2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
    3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
    Thanks in advance!

    Hi Reinis,
    In this situation, the first thing I would do is log into a different user account (if you do not have one, create one) and then see if the symptoms persist with the new user account. To directly answer your questions:
    1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
    Archive and Install using the OS DVD or by using Time Machine if you have it enabled.
    2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
    Fire up System Preferences, click on the Software Update icon and then select the Installed Updates tab.
    3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
    Console, which is in your Applications/Utilities folder.
    Kryten

Maybe you are looking for