Touchscreen stops recognizing finger once in a while

Hi all,
Since I did a total restore on my iPod, I have the following issue:
When I use my iPod for bearely a minute he stops recognizing my finger.
The iPod does frees for a few seconds.
When its done freezing, the app respond again but then the iPod doens't recognize my finger again.
(PS. I can still use all my buttons of the iPod) I have to lock my iPod before I can touch it again.
Sometimes I have to press the lock button a few times before the touchscreen works again.
I already tried safemode, but it still happend.
Aditional details:
Device: iPod touch 4 32GB
IOS: 5.1.1
Jailbreak: Yes, Cydia 1.1.6

Seeing that you have jailbroken the iPod Touch, there is nothing we can do to help you. The Terms of Use of these Communities prohibit any help with hacked or jailbroken devices.

Similar Messages

I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped

I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped I went into the camera app and tried to see if it would flash when I took a picture but I saw it light very faintly and hasn't done lot up since. Should I get the led replaced?

First, try bringing up Control Center by swiping up from the bottom of the home screen. Turn on the flashlight by tapping the icon in the lower left. Does the flashlight work? If not, perhaps you have a hardware issue.
If it works, check the top of the screen when you open the Camera app to make sure you have the flash on.

My iPod 4th generation screen shakes back and forth every once in a while and the touch screen stops working. Then I have to hit the sleep button on and off to make it work

My iPod touch 4th generation screen shakes back and forth every once in a while and won't let me use the touch screen. I have restored it at least 5 times to factory setting and it is still happening. The only way to stop it is to hit the sleep button off and then on again. It happens about once every 5 minutes. Please help.

If you successfully (completed all steps without errors) restored to factory settings/new iPod and still have the problem that points to a hardware problem. I would make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Every once in a while, letters stop working on my keyboard. I have to restart to get them to work again. Happens about once a week. Why and how do I keep this from Happening?

Every once in a while, letters stop working on my keyboard. I have to restart to get them to work again. Happens about once a week. Why and how do I keep this from Happening? An example is: I try to type Super Excited and the U, E and P won't work. But once I restart, all the letters work.

It could be an accumulation of all sorts of bits of info and depending on the last time you cleared the system cache either manually or via a factory reset on that phone you might find a difference there after doing so with many other system caches.
Clearing the application cache removes temporary files and frees up memory - your personal settings or information remain intact.
Be sure you clear only the application cache and not the application data.
From the home screen, tap Apps.
Scroll to and tap Settings.
Tap More.
Tap Application manager.
Swipe left to view the All tab.
Scroll to and tap an application.
Tap Clear cache.
You've now cleared the application cache.

My touchscreen stopped responding to my finger and I can't unlock the screen...any idea how to remedy this problem?

My touchscreen stopped responding to my finger and I can't unlock the screen...any idea how to remedy this problem?

Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

After loading mavericks Facebook will only load once in a while. Usually the blue bar goes half way and just stops and does nothing. Never had a problem before I updated.

After updating to mavericks, facebook will only load once in a while. The blue bar goes part way and just stops and does nothing. Never had this problem before. So far facebook is the only site I have had a problem with.

You can also try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/

E7-00 Stopped Recognizing Headset After Latest Bel...

My E7-00 stopped recognizing its headset after the latest Belle update. Restarting the phone doesn't help, changing the headset - neither. Any way to fix that?

Welcome to the Nokia discussions board!
Please check the AUX port to check for debris which may interrupt signal from the headset to the device. If this does not solve your issue, it may be worth your while to do the following reset on yoru device:
Hard Reset:
This will erase all data on your device, so a backup is recommended before you do this.
Once backed up, enter *#7370# and when prompted, enter 12345 as the default passcode.
The last resort would be to take it to a local Nokia Care point to get it inspected..
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Macmini stops recognizing iPod,

Hello everybody,
For no reason that I am aware of my new Macmini has stopped recognizing my iPod and my external HD. Anybody might have an idea as to why and how to correct this? Thanks

Michael, are your iPod and external HD copnnected using firewire or USB?
You might first have a look at the system profiler to see if either device is actually being recognized, just not mounting on the desktop. Go to applications/utilities and launch system profiler. With both iPod and hard drive plugged in, do either or both appear in the list under Firewire (if firewire connected) or USB (if USB connected). If they do appear there but not on the desktop, go to the finder (click anywhere on the desktop), and go to the finder menu, select preferences and ensure there are check marks against 'Hard disks' and 'CDs, DVD & iPods'.
If neither device appears in the system profiler, it means the system isn't seeing them at all, in which case the port(s) through which they are connecting may have stopped. To try and resolve that, do something called a 'PMU reset'. The PMU is the Macs power management system and is reset as follows:
- Unplug all cables from the computer, including the power cord.
- Wait 10 seconds.
- Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
- Let go of the power button.
- Press the power button once more to start up your Mac mini.
Let us know how you get on!

ITunes stopped recognizing my iPhone after upgrading to Leopard.

I recently upgraded from Tiger to Leopard, and iTunes (8.0.2) stopped recognizing my iPhone while iPhoto still works with my iPhone (I was able to download photos from my phone using iPhoto).
What's going on?
It's crazy! When iPhoto recognizes my iPhone, either iTunes or iSync doesn't reads the phone. It doesn't even give any error messages.
I did every solution I found on the net. Repair permission, Remove Local folder in Library.. etc..etc.. none of them worked.

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Why did my Windows 8 computer stop recognizing my ICD-PX820 to upload files?

I have been using my Sony ICD-PX820 recorder with my Lenovo Idea Pad, which I purchased a year ago running Windows 8 (which has since updated to Windows 8.1) I have been able to plug my recorder into this computer, using this OS, to upload audio files for more than a year...until it suddenly stopped recognizing it today. When I plug it in, the battery icon disappears from the recorder's screen, so I assume the battery is charging (therefore it IS connected) but the device does not show up under My Computer (or pop up as a folder like it always did before.)
Nothing changed - there were no new updates on my computer, no settings changed on either device, it just stopped working.
Sony Customer Service was no help - they sent me a link to a page suggesting I unplug everything, restart my computer and just plug in the recorder, which I did before I contacted them. I tried updating my drivers, but the product page says there are no drivers available to download for this OS (Windows 8.1) - even though I have been using this device with this OS for a while!
Help! I have an audio file on my recorder I need to email to a colleague overseas, and I need to record more interviews tomorrow so this is urgent!

Hi bronicba,
Welcome to the Sony Community!
Thank you for your message. I suggest you try plugging the recorder into a different computer if possible, try a different USB cable, and try plugging the recorder to different ports on the computer. There is a possibility that the pin that is responsible for charging the unit is still working and that the pins for getting the device detected might have gotten defective. So I suggest you try connecting it to a different pc.
Thanks and regards,

Lenovo Flex 10 touchscreen stops working after 1 hour of use.

Just bought a new Lenovo Flex 10 from a retail and it works perfectly except that after an hour of use the touchscreen stops working, the computer still works ok, but only with the mousepad. The notebook came with Windows 8.1, and I haven't installed any program on it. I need an urgent response please, since i've been looking for days in the community and other support pages, and still can't get a satisfactory answer and the period to get the a refund are about to expire.
Thanks in advance.

hi riglesias,
Welcome to the Lenovo Forums.
Once the Touchscreen stops responding, can you check the following:
1. Open System Properties and see if the Touch functionality is still there
- Link to picture (Touchscreen feature is not detected)
- Link to picture (Touchscreen feature is detected)
If the Touchscreen feature is detected, proceed to Step 2.
2. Press the Windows key‌ +R, type devmgmt.msc and press Enter. On the Device Manager, navigate to the Human Interface Devices section and uninstall anything that says HID-compliant device (this is the driver that controls the touchscreen). When finished, reboot the system and observe.
3. If the Touchscreen is still not working, hold the Shift Key and hit the restart button inside Windows and you should be able to see the image below then try to tap on the screen to test and observe. I
If the touch capability is still not functioning, I recommend you contact lenovo for service.
- Link to picture
- Support phone list
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My time capsule suddenly stopped recognizing my computers.

My time capsule suddenly stopped recognizing both my mac book and my mac pro. It used to work fine and now every time I log into a computer I can't back up (and the time capsule has a green light). I have tried resetting time capsule but no success (maybe I am doing it wrong. Any suggestions on how to fix this problem?

So I have had the same problem, try this fix for Airport Extreme/Time Capsule .
Airport Utility > Select the Extreme/Time Capsule in question > Disks > Disconnect All Users
Reboot the Extreme/Time Capsule in question > once back online > goto Finder > Shared > Reconnect Drive
> Open Time Machine Preferences > Select Disk > Use Backup disk > Backup Now
Good Luck

Why does my touchscreen stop working?

I have an all-in-one computer (HP Pavilion 23-h017c TouchSmart All-in-One Desktop PC (ENERGY STAR) )that I purchased just about a month ago. I have noticed that every other day my touchscreen stops working all together, nothing I do will fix it. Finally I just shut my computer down, waited a sec, and turned it back on. Once I did that my touchscreen started working just fine. If I just restart the computer my touchscreen still doesn't work - I have to shut it down.
My question is: Why does it stop working all of a sudden? This is driving me mad, I've never shut my computer down so many times before!!

I had the exact same problem. I had my HP Pavillion for less than a month when the screen stopped working all together. At first the screen would just shut off or not turn on when I tried to power up my laptop. It eventually stopped working all together. I had to wait 30 minutes on the phone for a customer service rep to tell me "press the power button" over and over again. Then I had to wait four days for HP to send me a box and then a week for HP to receive my laptop. I just found out after waiting on the phone for 45 minutes that it will take another month to receive my laptop. HP should recall HP Pavillions. They suck! The worst part of my customer service experience is they said they might not even send me anoher Pavillion. Apparently they are going to send me whatever is in their stock that has the same specifications as the Pavillion. I can honestly say the BIGGEST MISTAKE I ever made in my life was buying an HP product. HP SHOULD SERIOUSLY RECALL HP PAVILLIONS. Clearly they aren't working properly. No laptop should crap out after less than a month of use.

HT2844 iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working...

Hello,
My iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working through that port. I tested the speaker system through my iPhone, and it works fine. I hooked it up to the Headphone out/Optical digital audio in port, and it works through that port also. I did a computer restart, I also checked all wiring and did a system repair on the computer. I also restarted the computer in mode where I could use the system utility, and the computer still did not correct the matter, and it reported everything as being "ok". I wented into "sound", through system preferences, and the computer does not recognize anything I plug into the Audio in/Optical digital audio out port. When I plug the speaker sysytem into the headphone out/optical digital audio out port, it does recognize the Bose speaker system as being "headphones".
Reading through a lot of forums, I hear everything from compatibility, to the port being stuck, and on and on. Since the port was working before, and just quit working one day, I wonder if there is a capacitor or fuse or some type of similar thing is blown, and causing the port to be unfunctionable. Maybe the port went bad, but before this time, I had never used it, and the computer does not move around, and I never plug in and pull wiring out unless needing to, and that being rare.
Here is a link to Costco, where I bought the system, and the exact system I have, if this is any help: http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku= A4092931&ST=pla&dgc=ST&cid=262075&lid=4742361&acd=1230980794501410
By the way, I am running OS X Mountain Lion (10.8.5). I upgraded to Mavericks about a month ago, and expeirienced a number of issues, and had to take my iMac into Apple. Talking with the tech, I decided to wait for a while more before I upgraded to Mavericks. I try and keep the computer maintained.
If any of you have any ideas regadrding wear and tear, and fix I can do, etc., besides having to take my computer into Apple? Thank you, and potentially all of you, for your time and effort in helping me with this issue. Thank you kindly.
davE

Okay, davE, first, you have posted in the "Mac Pro" forum (not Macbook Pro), so we can't be super helpful
but we help you. First, hold down the Option key while clicking on the speaker icon at the top of your screen. This should show you all the inputs and outputs you have. you could check in "About this Mac" then "More info" to see whatever's recognized. Then, maybe, fire up Audio MIDI. your speaker system should show up there. something might have gotten set incorrectly. You can test it there. I guess you are using the good ol' analog cable for connection, and it works on your iPhone, so the cable isn't bad. You could try this. it 's an adapter which might solve your problem
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
depending on which model of Bose speaker you have, you might try doing a product reset
turn off speakers...unplug power cord from outlet...wait 1 minute..plug cord into outlet..turn on speakers..
\\turning off automatic standby||
press and hold top of control pod for 6 seconds until you hear 2 tones that go from high to low
other than that ,I don't know
John B

Our HP 1150us g7 has stopped recognizing our dual USB 2.0 Port. It is not listed to uninstall and

Our HP 1150us g7 has stopped recognizing our dual USB 2.0 Port. It is not listed to uninstall or update its' drivers. Only the one USB port works on the right side facing the notebook.
It is only 21 days out of warranty and I am told they can be replaced however it takes a huge amount of labor, then someone else told us it can not be exchanged only the entire Motherboard. I have found the exact part on sale so I believe it is replaceable.
Here is a link to order the part we believe can be replaced.
http://www.machinaelectronics.com/store/buypart.cfm?pn=NL028516
Does anyone know if it is replaceable or not?
We are sick about this we only had the notebook one year and for the warranty to run out only 21 days before this died we are disappointed with HP for not providing some assistance.
This question was solved.
View Solution.

The link you provided is not the same model as yours. While it may work, I haven't verified it.
Have you performed any hardware troubleshooting on the unit yet?

Touchscreen stops recognizing finger once in a while

Similar Messages

Maybe you are looking for