Touchscreen unresposive and pressing buttons on it's own
Hello,
I have the Xperia Z3 for three weeks now, and yesterday the touchscreen started to be unresponsive and doing things on its own. I have reset my phone and left it off for 12 hours but there is no difference in it's behavior. I also did the PC Companion Software repair but still no difference at all. Also I haven't dropped the phone a single time and it haven't touched any water at all. So if anyone have had the same experience I would gladly like to know what could be the problem.
With regards,
Connery M. A.
You should contact your local Xperia Care
http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
Similar Messages
-
BDC read screen value and press button
Hi,
How can i read a screen value and press button by BCD??
Regards,
KitHi ,
There is table bdcmsgcoll which holds the values so if do like below you can find out the values
data: it_tab2 type table of bdcmsgcoll with header line.
call transaction 'BGM1' using it_tab3 mode 'E' messages into it_tab2.
now it_tab2 will hold the values and you can check that in debugging mode
do reward if helpful -
Volume up and standby button both have double purposes
Hello,
I got a problem with my iPod Touch 2G 32GB. It worked perfectly all the time, until yesterday. The buttons look like the got a second purpose. When I push the volume up button, my volume indeed goes up, BUT... after I release the button, I hear the click and my screen goes to standby (and if I push my volume button long enough, I even get to see the red "power off" slide). Some goes for the power button, when I push it, it indeed powers off the screen, but it also turns up the volume.
In other words; The volume up and power button both have their own fuction, but also the function of the other. Can someone please tell me how to fix this?
Things I already tried;
-Restore the settings via iTunes.
-Go to settings-->regular settings (the button above the music button)-->restore all settings.
-Go to settings-->regular settings-->Delete all content and settings.
I really hope you guys can help me, because I really need this thing. I can't just bike 70 minutes a day without an iPod...
Regards,
Donny
P.S. I am from the Netherlands, so pardon me for my lack of English knowledge.Hi, once again,
I bought this one used, so didn't buy it new at the store (well, it was, I traded my first hand iPod Touch 2G 16GB for the 32GB with someone :P ). So I don't even have prove I even bought it.
Well, guess I am out of luck. Thanks for answering my question . -
On my ipod touch the screen is white, and i've tried pressing the home button and lock button at the same time and nothing happens... what do i do?
On my Ipod touch the screen will not work. I can't slide it to unlock
Try here > iPod touch: Troubleshooting touchscreen response -
My ipad won't turn on even i press home and sleep button together
My Ipad Won't Turn On Even Press Home And Sleep Button Together..Its Happen When Charging Yesterday Night..Its That My Ipad Need To Repair The Sleep Button?Because Cannot Connect To Itunes..Help...
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
http://support.apple.com/kb/ts1827
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Qosmio x770/00x - button 1 does not work pressing 6 and other button
This is going to sound so weird, but bear with me...
I just got a Qosmio x770/00x a couple of weeks ago, mostly for gaming purposes.
I play in left-handed configuration, using the Num pad as directional keys, with some of the other non-directional numbers mapped to things like 'jump' and 'melee', etc.
I have the '1/End' key mapped usually to the 'Crouch' motion in games, and noticed that if I press the '6/Right' key, in combination with any other number key, the '1/End' key won't register!
This means if I'm moving Forwards in a game, and Strafe to the right, I can't simultaneously crouch.
I've done a bit of playing around, and it seems that this bug isn't limited to my unit, or to any particular program. If you try a similar thing in any other program (eg Notepad), and hold the '6' key down along with any other number key, the '1' key won't register.
However it seems that it *has* to be the '6' key in the combination (eg. if you press '4' and '7' together, and then press '1', the '1' will still register.
Have also tried this on the store demo model at the local computer place, and it seems that it's a problem with this particular model.
The store computer runs Windows 7 Home Premium.
I'm running Win7 Pro. BIOS and Windows are fully updated.
Have also tried it on my older P-series Satellite, and that doesn't have the same problem.
Any ideas?Hi
>I've done a bit of playing around, and it seems that this bug isn't limited to my unit, or to any particular program. If you try a similar thing in any other program (eg Notepad), and hold the '6' key down along with any other number key, the '1' key won't register.
>However it seems that it has to be the '6' key in the combination (eg. if you press '4' and '7' together, and then press '1', the '1' will still register.
Ive got 2 notebooks from two different manufactures and the button 1 does not register if 6 + other button is pressed.
Dont think its a really a keyboard bug because this happen with my two notebooks which are not really similar to each other -
I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I create HTML5 help projects from a package called MadCap Flare. It uses what they call an HTML5 'skin' that sets the style/layout of the page and also includes 'Navigate previous' and 'Navigate next' buttons. When viewing the help and pressing these navigate buttons in IE8 or Chrome 32 there is no problem, but in Firefox 27 I get the following: (typical error for pressing a button on any page)
"File not found"
"Firefox can't find the file at /C:/SVN/FlareEnglishOnLineHelp/Output/HTML5_Help_Modeller_Reference/4attrib/idh_jointinterface_element_meshes.htm?TocPath=Modeller Reference Manual|Chapter 5 : Model Attributes|Meshing|_____2."
" Check the file name for capitalisation or other typing errors."
" Check to see if the file was moved, renamed or deleted."
- Because the files and buttons work in other browsers I'm wondering just what is going on here with Firefox>>>>I should correct that last entry and state that the | charactacters are generated automatically in the Toc-Path for each 'book' name in the online help, and are not something manually created, whereas the : characters have come from the TOC book topic names (which were manually entered names and are what we would ideally require). But, because 'previous' and 'next' topics within nested TOC books without colon (:) characters CAN be browsed successfully when just | characters are present in the Toc-Path, the limitation would appear to be solely due to the : characters.
-
MY ipod touch 5 wont turn on. i tried holding the power and home button together to reboot but didnt work. i tried pressing only the home or power button but no response . it doesn't show up in itunes. i tried keeping i in charge but it doent even show the charging icon! it does not show the no battery icon either. i tried leaving it with no disturbance for a few hours but still no luck . it has no response . My 1 year warranty is already expired. is my ipod officially and completely DEAD????
See if you missed anything here
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free. No warranty required
Apple Retail Store - Genius Bar -
Sorry about the long title.....its my first post.
My kid just got a brand new iPod 5th generation (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line on left and lightning symbol below. There is no other response at all no matter what I do, including holding both buttons down for extended period. My other kid got one and it works perfectly.....I have interchanged usb cables ports etc. but still no response....I would really appreciate any help.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem with the iPod. This is because as you said the same cable works with another iPod.
Apple Retail Store - Genius Bar -
ok, so heres my problem . I have this ipod touch 4g and i was updating it to the newst version and the screen turned white i tried connecting it to the computer and nothing i pressed the home and main button but still nothing i dont want to pull it apart or anything but please help what do i do
Let the battery fully drain. After charging for an hour try the reset (both buttons) and restore as necessary.
-
my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.
You need to connect to iTunes and restore.
iOS: Not responding or does not turn on
You may need to put the device into recovery mode, this is covered in the link on this page.
Did you back up the device? -
I have reached out to this community as my Iphone display gone black and got the solution to keep home and power button pressed. It worked but I would like to know
1. Why it went black and is there a permanent fix for this
2.Will the IOS gets automatically updated as I feel the IOS was 5 when I got the phone in 2012 december
3.Do you suggest 7.1 for Iphone 41. There is no way of knowing. These things happen.
2. The iOS only gets updated when you want it to be.
3. You should always update to the latest iOS your phone will support. Apple do not write the updates to make your experience worse. -
I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?
If it is otherwise working, you can change the battery. If you want to do it yourself, you can buy the part on eBay and other online sources. Just make sure you know the type of iPod you have so that you get the right part.
http://support.apple.com/kb/HT1353
There are online guides, including the ones on this web site
http://www.ifixit.com/Device/iPod
(Note: Most replacement batteries come with plastic/nylon tools seen in the guides.)
You can also have a repair business do the work.
If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes. -
As the title says, this is a brand new iPod touch bought from a store, I plugged it in a commenced the "setting up" process through iTunes on may iMac. It got to the stage where it said allow this computer to access the device (or something along those lines), i clicked yes, and then a message came up "to allow access, please respond on your iPod touch. however the ipod screen is black, and pressing the buttons doesn't work. How can i fix this? or do I need to return it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
When im on the phone my ear keeps pressing the apps how do i stop it
when im on my phone my ear only has to touch an app and it keeps beeping how do i stop it from happening
-
Weblogic 8.1 with Xalan 2.6.1 and Xerces 2.6.2 ?!?
Hi, I'm trying to use Xalan 2.6.1 and Xerces 2.6.2 with Weblogic 8.1SP2, but no result yet... I found docs on bea website: http://edocs.bea.com/wls/docs81/pdf/faq.pdf http://e-docs.bea.com/wls/docs81/xml/xml_admin.html where I found this: "Warning: I
-
I recently up dated my OS to 10.7.3 and I get a "can't open application because PowerPC applications are no longer supported. Can this be restored? If not do you know if Epson has drivers for my scanner that work around this?
-
Would like to monitor teaming with snmp
Hello, I would like to use snmp to monitor the state of teaming/vibe. I can't seem to find much information on the subject in general and none specifically to do with teaming/vibe. Does teaming/vibe have an OID? If not, is there some way I can give i
-
How I can associate shh protocol to putty in firefox or windows?
How I can associate ssh protocol to putty in firefox or windows? == This happened == Every time Firefox opened