Touchsmart, 610-112it fully switched off by a program
Running a game, Call of Duty MW3, sometime my computer fully switches off, without any warning and without any regular log out preocedure, it just swithes off as if someone pulls the electric wire. It's like something very dungerous is happening and the pc decides to quit at all. This happens only using this game. Any idea on why this happens or when this should happens if, it's a safety feature?
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!
Similar Messages
-
''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1038650 /questions/1038650]''
After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus. Although i can switch them on and reboot firefox to fix it, but it is a little bit boring. How can i solve this problem?Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus.
After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus. Although i can switch them on and reboot firefox one more time to fix it, but it is a little bit boring. How can i solve this problem?
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
TouchSmart 610-1115uk Randomly Shuts Off Without Warning
i have had this TouchSmart for about 2 years now and it is in immaculate condition. physically apart from dust, which i clean out regularly, you'd be mistaken for thinking it was new. in terms of operation i have always been careful to look after it too, running regular scans of the HDD and hardware, updating drivers and being careful when it comes to what i download.
i have recently upgraded to Windows 8 Pro x64 (within the last 2 months) but didn't do a clean install, i simply upgraded from Windows 7 Pro x64, and to be honest after a few tweaks the computer was working better than ever, it was faster both running programs and in terms of startup time, and graphics looked better than ever.
then about 2 weeks ago it just shut off without warning, not shut down like if you'd asked it to, but just went blank like loss of power, i powered it up and it didn't do it again for quite a while and so i assumed it was a one off. but it soon started doing it regular. i've gone through every thing i can possibly think of trying to diagnose what the problem is, i've checked all wires and connectors, cleaned out all dust and checked for overheating, updated drivers, removed the extra RAM i'd installed not long after purchase, wiped the system and reinstalled Windows 8 from scratch, deactivated Threading on the CPU, and have reduced power to the CPU down to 50%.
this last action did reduce the frequency of the shut off issue significantly but it just seems completely random, i can be running any number of programs and it can work fine for hours, and then i can be doing nothing on it and it will just die.
i have run no end of diagnostics on it and they all say everything is fine, no viruses, no errors and no build up of heat (i've monitored the temperature rise when running and it never gets over 40 now with the CPU power turned down).
please can someone tell me if i'm missing anything, and if i can solve this without HP as my warranty ran out a few months ago, thank you.
updated: the shut off problem seems to occur more often when the computer isn't really having to process very much like when it is left idle or when i'm just using the internet, whereas if i play a game or use a resource hungry application it rarely happens.I'm going to reply here just in case someone else happens upon this post and wants a definite answer like I did...
My Problem
My computer randomly shut down as if the power had gone out. I didn't shut it down on purpose, hit a button, put it to sleep nor was it running updates and needed to restart... it simply, shut off. It shut off much like the power goes out in a home, however all of my lamps and other electronics in my room were on. It was only my computer that shut down.
I followed a lot of advice in the forums and it did turn back on a few times but only for a few minutes before turning off and never coming back on.
I feared it would be the motherboard but a friend informed me it could be the Power Supply (the brick) and I saw THIS post and thought... it has to be that... or at least I HOPED it was that... or I was switching to Mac.
Never heard a response back to my reply to this post, and I didn't see a follow up to the guy above seeing if it worked for him.
The Solution
I decided to go ahead and purchase the power supply part for my computer which is the HP TouchSmart 610-1130f All-in-One series. It needed to be a 150W (hard to find but is sold in the HP Parts store).
This is the part info: 609919-001 In stock Powersupply - Madeline-R 150W 19V EPS2.0 Shasta
Upon receiving the part and plugging it into my computer, it worked. That was 9 hours ago (currently using fixed computer) and it is running just fine. I'm STILL holding my breath and hoping it doesn't go out again. If it does I will come back to the forum and let everyone know.
Hopefully I won't be back again in 2 years to purchase a new part. Lucky it wasn't something worse like the motherboard... having a computer that only lasts 2 years?
Anyways. Thought you should know random person reading this. Best of luck. -
Nokia Lumnia 610 problem when switched off
when I switch the mobile fully off then switch it back on again and/or the battery is discharged, it doesn't record any calls or texts received when the phone is switched off [fully] or the battery is flat. Can anybody help please
It wont record anything if switched off,some operators provide a call catcher service,ie you get an sms that you have had a missed call.
If you turn on your phone and no sms come through it simply means you got none.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
Switch off asistant in program
Hi,
How to switch on or off the asistant in any ABAP program
this ption is there in edit->modification operations->switch off asistant.
Regards,
SonikaHi,
i am trying to modify a Z program and the switch on option is alreday activated there.I can switch off that option.
but i want to how to activate it in Zprogram?
Regards,
Sonika -
Where can I find the wireless switch on a hp touchsmart 610-1230?
I have just purchased a new HP TouchSmart 610-1230 and when connecting to the wireless network it informs me that the wireless is turned off. It says that I need to find a button to turn it on but I can't find this button anywhere on the computer. Does anyway know where I can find it?
Hi,
Is it a dv6-1245dx ? The switch is on the top right corner. Page #11 of the following manual shows you where:
http://h10032.www1.hp.com/ctg/Manual/c01758220.pdf
More manuals are in the following link:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&product=3979380
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
My HP Touchsmart 610 screen is blank when I switch it on. only less that a second screen flash.
when I turn on my computer hp touchsmart 610 desktop the screen has only less than a second flash and then it's blank and I can't see anything. I used some instructions like pushing f10 key for 5 seconds and reseting the bios and blo blo but it won't work. I also removed cd or usb but it still not working. plesae somebody help.
Hi Fanoos,
Although this post is a couple years old, I figured I would give it a reply anyway just so other people with similar issues have a little more up to date info.
AugyTek is actually the name of my repair shop, and this is a "fun" problem that I see all the time.
Regarding specifically the Touchsmart 610 system, when you see the flash like that, there is an easy way to tell exactly where the problem is originating from.
First, check your power supply "brick". It should be warm to the touch with it plugged in and machine running. If it feels like it is going to burn your hand, your PS is probably the culprit. I recommend taking it to your local technical shop, or using a voltmeter if you have one to see exactly what it is putting out. It should be 19v give or take a couple tenths of a volt. Anything more than a couple of tenths off and your power supply is probably the culprit, and may have done some additional damage to the PC itself.
If everything is good there, now it's time to assess internally. Power off the machine, disconnect the power supply, hold the power button in for a couple of seconds until the green light on the back is no longer lit. Follow the instructions on the HP website to removing both the left and right covers on the back of the PC. (Take proper precautions for static electricity.)
Take out the Hard Drive and the RAM. replace the covers, but no need to screw them in. Plug your power supply back in and power the machine on.
You should get one short and one long beep and nothing should display on the screen. This is testing for proof of life from the board. If you get no beeps, your board is malfunctioning and sadly with these it often is easier and cost effective to just get a new machine than replace the board.
If you get beeps, the board is fine and you need to replace one stick of ram after powering off properly again and then start it up. You should be able to see the "no boot media" message it displays because the system will halt.
If the lettering is fuzzy, diminished, in a low resolution, or looks anything other than normal, the likely cause is video related. You now have to determine to what extent the video is malfunctioning.
(Yes, I know that you probably arrived at this conclusion already that the something was messed in the video/display area, but I can't tell you how many times I have asked people if they have tested for other things and they say no or how do you do that? By ruling out other malfunctions, you arrive with the correct solution faster.)
You can power the machine down and remove the back covers and carefully reseat ALL micro style cables that you can see. There should be 3 in the top left, 2 on the inverter (the thing with the cover), and then 4 in the top right that are kind of hard to manage. These cables are all related to power, with some related to video and the touchscreen itself.
So now boot the system up normally, if you still have the one second screen, then attempt to plug in USB devices, insert a CD/DVD, and if you have one handy, use a USB to VGA adapter. If any of these things do not initalize/work properly with the typical windows sound when you plug them in, the likely cause is your motherboard, related to power issues.
If your board is not able to route enough power through it past the graphical chip, into the inverter, and the LCD, power USB devices, etc., this is a tell tale sign that your machine has issues supplying enough power to all these things. This is why you will see the one second screen everytime you turn the screen on or wake it out of standby, because there isn't enough or consistent power to keep the system running normally.
Because it is fairly cost prohibitive and time consuming to replace the board, you can pretty much write off the system.
Now if your USB devices and Optical drive work fine and everything initializes, you may be able to get away with replacing the inverter. These parts do go bad, and the inverter, which sits on top of the optical drive in the system is naturally exposed to heat from the DVD drive and is a really bad design flaw. Replacing this may solve your problem.
If it is replaced and you still have the same issue, likely your problem is with the LCD screen itself, and again... not really worth it to replace it.
If it is your board and power issues, if you are hell bent on repairing this, and you are familiar with how to reflow a board, or know a professional that can attempt it, you certainly can give it a whirl. DO NOT attempt the unprofessional ways to reflow a board as you see on some videos. Whereas these methods can work, you need to have an intricate knowledge of electronics and temperature effects on circutry to even warrant attempting them.
Some people say a hair dryer will work, but the problem is then you dont know exactly how much heat you are at temperature wise, and a hair dryer will auto cool and heat it's coils as it sees fit to maintain it's own stability, where as a genuine heat gun will not. Again, if you don't have experienced knowlege in reflowing boards, I wouldn't recommend doing it.
By reflow, I am referring to reflowing the solder in the board. Unless a visible malfunctioned blown or bulged capacitor is present, reflowing the solder to it's original paths is done by the way of keeping the board level, and gradually and evenly heating the board up to a temperature to where solder melts. Solder will naturally go back into it's original form at a certain temperature and reseal any cracks or breaks in the solder, thereby repairing the flow of electricity for that certain component. This is also assuming the component that has the solder is not damaged as well.
This process is best left to professionals with proper equipment, because you can in fact to irrepariable damage to the board if you are inexperienced. Being careful will not save you in this instance.
The one thing you want to remember with All in ones, and especially touch screens, is that they generate an AMAZING amount of heat. Any blockage from dust or covered vent ports can quickly lead to your machines demise. Due to the design of any All in one, heat has been, and probably always will be an issue with these units. -
Macbook Pro retina display 13 inch 2014 model stopped charging. Charger LED also not on while plugged in. The battery fully drained off so the system can not be started but the system can detect the charger when earlier it was switched on before draining off the charge. Charger type magsafe 60W.
Once you have examined the power inlet on the computer for dirt, and made certain that the pins on the end of the MagSafe cord are free to move in and out to make contact, there is very little you can do yourself.
You will need to visit your Apple Store (FREE with appointment) or your Apple-Authorized Service Provider (policy varies). They work on these all the time and have good expertise and lots of spare parts to try to determine the problem. -
Hi
my ipod recently has only been working when it is on charge. Once i take it off charge it switches off automatically, could you tell me the problem or how i can resolve this?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipad just flashes green and then switches off. i cant switch it on. its fully charged.help!
My ipad just flashes green and then switches off.its fully charged.help!!!
Dear Barry...thank you for your reply.I am afraid it still doesnt work. Theres a white flash and a shutter sound and it wont stay swited on. I only had it since Jan 2013.
-
Hey my ipad 3 was fully charged. But all of a sudden it got switched off and I cannot switch it back. I connected it to a charger but there was no improvements. I also tried pressing the top button for 30 seconds. Nothing seems to switch it on. Could you please tell me what to do?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
HT201412 the iphone keep switching off even the battery is fully charged.
please can you help me solve this problem? My iphone keep switchs off. even the battery is fully charged.
some one should help....
-
HT201401 my iphone 4 is charged fully however it switches off automatically oftne
I bought Iphone 4 from US during May 2011. It is working fine till now. But it often switches off automatically. Though it is fully charged this also does not displayed in Itunes in the system.
Any solution to thisThere is likely a hardware problem.
If your iPhone randomly powers completely off, there is a major problem.
If no change after restoring your iPhone with iTunes as a new iPhone, if you are in the U.S. call AppleCare or make an appointment at an Apple store if there is one nearby. -
IPad 4 switches off when i am using it, even when battery is fully charged. Restore function (holding down both buttons) often does not work. Cannot power up iPad. I have updated software, restarted computer, but no success. I did restore the iPad about 8 times during the past 2 weeks. Just completed another restore. iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready. That was 30 minutes ago. iPad still won't start. I am looking down the barrel of yet another fruitless restore. What a crap product.
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.
Maybe you are looking for
-
I can write and send emails in Yahoo mail when I use Internet Explorer. But I hate Internet Explorer. For the past two days, I have been unable to use the keyboard to enter email recipients, unable to enter anything in the cc, bcc or subject lines, a
-
How to add objects to panel from another class?
Hi this is what i am trying to do. I have a drag and adrop tool working where the users and select objects on a small panel and drag them to another panel called the tpan. What i want to do is create another class, which creates objects and now i wan
-
How to get back to the three security questions?
I was in the app store on ipod touch and got the three security quistions. I proceeded to answer them. On the third quistion I went to type an answer and evidently hit something and the that screen disappeared. Not sure if I completed it or maybe
-
How can I find out if someone registers my stolen iPod?
My iPod has been recently stolen. I'm pretty sure it has been cleared and i want to know if someone else registers its serial number in apple. Any suggestions?
-
How to Park the single invoice for multiple purchase orders
Hi, How to Park the single invoice for multiple purchase orders?