TouchSmart 610 Touchscreen is not working (windows 7)

Hey guys,
I have had my TouchSmart for about 2 years, and it's been near a year that my touch input hasn't been working, but since I wasn't really using it, I never followed up until last week. But I was pretty upset when I realized I had a 2 year warranty which was just expired on 02/02/14. I have tried all be basic things that has been suggested on this site or any other sites, such as running Windows update (and yes I installed the optional updates as well). I have also checked and updated all the drivers, and at this point is running out of options. I have a bit of IT experience so I think I know what I'm doing but I'm running out of ideas. Any suggesstions?
HP TouchSmart 610-1100z CTO Desktop PC
Windows 7 Home Premuim - Service Pack 1
Product no: QB912AV
Everything in Device Manager seems normal (no warning signs)
Thank you for help in advance

Hello ShawnShamlou,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your t ouch screen on your HP TouchSmart 610-1280qd CTO Desktop PC is not working and you are now out of warranty. I am providing you with an HP Support document: Troubleshooting Touch Screen Issues in Windows 7 that will give you troubleshooting steps to help you resolve this issue. I would focus my attention on the subject "Pressing the touch screen does not do anything" as that is the section that applies to your issue.
Please re-post with the results of this document. Thank you for bringing your issue to the HP Forums. Enjoy the rest of your day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Autofill function is not working, 'window' sticks through it not functional!

autofill function is not working, 'window' sticks through it not functional!

Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Quit and relaunch Safari.
2. Select your card in Contacts. Then select
Card ▹ Make This My Card
from the menu bar. Also select
Contacts ▹ Preferences ▹ vCard
and uncheck the box marked
Enable private me card
if it's checked.
3. In Safari, select
Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
If the box was already checked, uncheck it and then check it again.
4. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!

This topic has been moved to Operating Systems.
MSI Live Update not working Windows XP Professional 64bit Edition!!!

Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I?

ThinkPad internal microphone not working - Windows 8.1

Hello everyone,
I'm back on this forum because I had another issue... See my first one : http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440p-camera-not-working-windows-8-1/m-p/18...
There was a problem with the cable between the camera/microphone combo card and the daughter card. Now the camera is working properly. A technician replaced the cable.
But I realized that my internal microphone is not working. I don't remember if it worked once...
My microphone is not muted, and I reinstalled the real-teck drivers. When I try to use the "listen" option in the microphone properties, I here a sort of wideband noise (let's call it white noise).
Do you have any suggestions that might help?
Thank you very much
Moderator edit: Correct version of Windows in thread subject

Anyone ? Thank you !
EDIT : sorry I'm on Windows 8.1 not 7

HP Envy Touchsmart 4-1118TU - Audio not working - Windows 8.0

Hello,
The audio on my HP ENVY touchsmart notebook has stopped working - notebook is approx 12 months old.
This occured seceral months ago, uninstalled the driver, reinstalled the driver and it fixed the problem.
Has now happened again, sometimes resetting fixes the problem but after several events it has now stopped working.
Tried uninstalling and reinstalling the driver again, but has not worked this time.
Currently running Windows 8. Have thought updating to Windows 8.1 may help rectify any bugs - but have not tried the upade as of yet.
Any help would be appreciated.
Jamie

Hi,
Please use the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03257712
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

2nd gen shuffle not working windows 7

I connected my 2nd gen shuffle to my laptop (Windows 7) and it told me I need to restore it, but Itunes keeps crashing every time i tried. I restared my pc, then it stopped showing in Itunes but showed on devices, and was on. Now it does nothing at all, no lights or anything. Any help appreciated

I have two suggestions. There is an iPod Reset Utility
http://support.apple.com/kb/HT1238
that is only for the 1st and 2nd gen shuffle. It does something like a Restore in iTunes, but works at a "lower" level in cases when a Restore in iTunes does not work (or cannot be used). For it to work, the shuffle does need to be seen by the system, and it sounds like yours meets that requirement.
Unfortunately, I don't think it works with Windows 7. If you happen to have an older PC with 32-bit Windows, you can use that PC to run the utility on the shuffle. Or, maybe you have a friend with a Mac or 32-bit Windows PC that can run it for your. Or, if you have an Apple Store nearby, you can make a reservation at the Genius Bar and ask them to look at it and run the reset utility.
The second suggestion, if you don't have a convenient way to use the reset utility, is to use Windows to reformat the shuffle's storage like it was a flash drive. Use a "full" format (not the "quick" option). Use the "FAT" format type. Make sure iTunes is NOT running. After it is reformatted, it will be blank. When you run iTunes, it should recognize the shuffle and ask you to Restore it (to re-install the software and set it to default settings). Hopefully, it will work this time.

All of the App Tabs you have set when you close Firefox will open as App Tabs when you start Firefox again. This is not working, windows XP system. Bug or fix?

Just installed v5 of Firefox over v4.1 to XP system, 2Gb memory. Reinstalled 2Java updates, Silverlight and adobe reader as recommended in post firefox installation window. Rebooted and tried to make the new AppTabs work to no avail.
I"m not sure what else you need. The new AppTabs are not working. When Firefox is closed, AppTabs do not reappear when it is reopened later. They were installed by right-click on open tab as instructed on your upgrade website. Tabs were for yMail, gMail, and iGoogle. I have not tried to pin any other apps or sites. Is there anything I can do to make this work, or is this a bug? Thanks for the assist. mikeS

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See also:
* http://kb.mozillazine.org/Session_Restore

Wi-Fi Sync not working Windows 7 64 bit iOS 5 Itunes 10.5

The computer where Itunes is installed is hard wired to a switch which is connected to my wireless router. I am unable to sync wirelessly to my Iphone 4. I have iOS 5 installed and am running itunes 10.5. I connected iPhone to computer with the USB cable for initial sync and checked sync this iphone over wi-fi under iphone > summary > options in itunes. I can use the apple remote to control my itunes library so I do know that I am connected on the network, yet Wi-Fi sync will not work. My hardware configuration is as follows Windows 7 Profeesional 64 bit, Cisco Lynksis switch, Netgear WNDR 3700 router, I am running Norton 360 but I had completely removed it and tried syncing but that made no difference. Any help would be appreciated. Thanks in advance.

Update
After trying ever tip posted in these discussion threads (firewall, restarting itunes, resetting phone, disabling and re enabling UPnP on router, etc. etc.) the only thing that worked was uninstalling itunes and then re-installing. At first the phone appeared after unplugging right away but then disappeared after 5 minutes. After restarting itunes it seems to have fixed itself and I couldn't be happier. Anyone having problems with the wireless sync should try uninstalling itunes and then re-installing. It worked for me.

Skype mic will not work (windows 7 64-bit using re...

I recently built a new pc and everything has worked besides this. I have tried for a month to figure out what is the problem. No matter what I do I cannot get my mic in skype to work. The mic functions in everything but skype and it worked with skype on my old pc. The only thing that happens when I click on mic in audio settings is a one second green bar then nothing.
have updated realtek audio manager
I have gone into the audio settings on skype and have it selected
I have gone into sounds and messed around with recording devices
I have uninstalled and reinstalled skype ( I'm using the current version)
The mic works with everything but skype.
I would really appreciate some help with this issue

I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.

HP Touchsmart 600-1047 - Password does not work - Locked out

I read all the posts and did not find this particular issue. I powered down my PC, unplugged it, and pushed the power button to remove all electricity. Turned it on, chose my user account, and entered my password. I know I am entering the correct password because I has just used it 15 minutes prior, however, it will not accept that password. I cannot perform the change password because my cd/dvd drive does not work and I do not have a disk anyway. Please help!!! Thank you!

Hello msnhra31.
This is bummer. You need to do a factory restore. Because you can not excess any Windows. Turn on your computer and tap your f-11 key. This will automatically start your recovery manger. Use a simpler pass word when you reset up your computer. Make it so you do not accidentally hit other keys while typing in your new pass word. If your cd/dvd drive was working you are given that option to back up your personnel files. Are you sure it does not work. These computers are fussy and only use Memory EX Cd-R / DVR discs. They won't play DVD's movies or open up software disks. Unless it has certain codes. I purchased an usb cd/dvd drive witch cost alot less then purchasing the update for hp's player. If your computer's cd/dvd (optical drive) is bad I recommend you to buy an usb external hard drive. That way you will always have your personnel stuff stored on it.
Have fun restoring your computer. At first it will be unstable until it downloads 244 updates so bare with it. Your Internet Explorer 8 will defiantly be hard to use because we currently on Internet Explorer 11-12 . So I recommend to down load fire fox to use until your windows gets updated.
frrw

THX TruStudio Pro not working (Windows 8.1 64-bit) GT60 0nc - help !!

THX TruStudio Pro not working there is no effects, like doing any thing on THX TruStudio Pro will give no change in the sound
i have the latest realtek sound driver
any help please !

Quote from: adybrasov on 13-January-14, 20:41:25
Have you tried the original one from windows 7 x64? >> thx_pro_nb_w7_3264_10211 THX TruStudio Pro(W7 3264,1.02.11)
I suggest you delete the Windows Registry in connection with THX then restart and try your luck in >>> this case MSI version on the website of your laptop goes. Let me know and I'll give you my kit.
THX TruStudio Pro Settings from windows 7
not working at all on 8.1

URI Scheme Not Working - Windows

The URI scheme is not working on Internet Explorer or any browser in Windows 8. I am using the URI scheme from the microsoft technet site. Oddly enough, it works flawlessly on apple computers - it launches the microsoft remote desktop app when i click on
the link that contains the URI scheme. On Windows 8, it says that no apps are installed to read that file type (rdp). I really need the use of this. Why is it working on macs but not on pc's running windows?
Here is the URI scheme i am using - obviously the server name and domain have been replaced
rdp://full%20address:s:servername&domain:s:domainhere

Hi,
Yes, this URI Scheme only works for Android, Mac and IOS devices.
Remote Desktop Client URI Scheme Support
http://technet.microsoft.com/en-us/library/dn690096.aspx
For Windows Client, you need to register an application to a URI Scheme, such as associate mstsc.exe with rdp://
Registering an Application to a URI Scheme
http://msdn.microsoft.com/en-us/library/aa767914(v=vs.85).aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

HP Pavilion Touchsmart (DTS Sound) external sound not working

I recently bought my HP laptop a few days ago and when I turn it on I hear an annoying clicking sound. At first I thought it was the Hard Drive, so I called HP and they walked me through some tests to check out the Hard Drive, but eveything came out fine. Now when I tried to play a video the sound is not working. The clicking sound seems to be coming from the speakers but when I mute them I can still hear the clicking. Can someone please help me on this.

Hello saalomi,
Welcome to the HP Forums! I hope you enjoy your experience!
I understand you were troubleshooting hard drive issues, and now you do not hear any sound when you play videos. I apologize for the delayed response, but I will do my best to assist you! In order to assist you properly, I do require a little more elaboration on the issue, and the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Locating the Model Number of the Computer
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Have you installed any new hardware on this computer, before the issue appeared?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Please respond as soon as possible. Thanks for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Start Menu, Notification center, project spartan not working - Windows 10 TP 10049

I updated to windows 10 technical preview (Build 9926) from windows 8.1 OEM. The start menu and notification center were not working. I tried PowerShell method but that didn't help. Then I updated to Build 10049 hoping things would get better, but start
menu and notification center still didn't work. Project Spartan opened and closed. I setup an additional user account to try if it had same issue but I was not able to switch accounts. I am using Lenovo Y50-70

Hi patanai,
Regarding DISM command, you may take use of Windows 10 build 10041 ISO:
you should mount the ISO as a drive first, or take use the install Media (USB or the DVD drive), right click the ISO and choose to
mount, after that, you could access the ISO through Window Explorer.
Then open CMD with admin rights, type the following command:
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Sources\Install.wim:1 /LimitAccess
Where the X: drive is the mounted drive letter.
Before that, please try to create a new User account and check if the issue insists.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Recovery not working, Windows now won't start

I have recently received a Yoga Thinkpad. I was testing the recovery process and the laptop will no longer boot.
The USB recovery drive I'm using was created on the same laptop, prior to this problem. I disabled secure boot, so that I can boot off it. The recovery process appears to work, but when the laptop reboots, it doesn't see Windows on the HDD and so boots from the recovery drive again. When resetting the PC, selecting "keep the existing partitions" doesn't work - Windows complains about a required drive partition being missing. However, diskpart is showing that the all the partitions are still there (Windows, Windows recovery environment, recovery partition, plus one called SYSTEM_DRV).
I tried installing a retail copy of Windows, but it won't install since the disk is GPT (and I'm not willing to try completely resetting the disk yet). I've tried restoring the factory keys in the BIOS. I *haven't* yet tried resetting to Setup Mode.
What else can I try to get the laptop going again?
I'm guessing if I delete all the the partitions on the disk, recovery might work, but I wanted to check in here first to see if anyone can advise. I've been using the Ultimate Boot CD to have a look around, but not make any changes, since I'm not sure if the tools support GPT disks. I guess dropping to the command-line and using diskpart will do the trick.

I have recently received a Yoga Thinkpad. I was testing the recovery process and the laptop will no longer boot.
The USB recovery drive I'm using was created on the same laptop, prior to this problem. I disabled secure boot, so that I can boot off it. The recovery process appears to work, but when the laptop reboots, it doesn't see Windows on the HDD and so boots from the recovery drive again. When resetting the PC, selecting "keep the existing partitions" doesn't work - Windows complains about a required drive partition being missing. However, diskpart is showing that the all the partitions are still there (Windows, Windows recovery environment, recovery partition, plus one called SYSTEM_DRV).
I tried installing a retail copy of Windows, but it won't install since the disk is GPT (and I'm not willing to try completely resetting the disk yet). I've tried restoring the factory keys in the BIOS. I *haven't* yet tried resetting to Setup Mode.
What else can I try to get the laptop going again?
I'm guessing if I delete all the the partitions on the disk, recovery might work, but I wanted to check in here first to see if anyone can advise. I've been using the Ultimate Boot CD to have a look around, but not make any changes, since I'm not sure if the tools support GPT disks. I guess dropping to the command-line and using diskpart will do the trick.

TouchSmart 610 Touchscree​n is not working (windows 7)

Similar Messages

Maybe you are looking for

TouchSmart 610 Touchscreen is not working (windows 7)