TouchSmart 610z CyberLink Media Library Service issue with Windows Home Server Connector

After unboxing and configuring my TouchSmart 610z PC at one point I noticed that they TouchSmart "Photo" app stopped working.  Whenever I launched the app, I would get an error message stating that "Cyberlink MediaLibrary Service has stopped".  
I called HP support and after trying several things, the rep advised me to do a full system recovery (Factory Defaults).   After the recovery, I started configuring (installing software and tweaking settings) and at some point the same thing happened again.  I tried to go back to various system restore points, but once the problem starts ocurring, it persists.
After another fully system recovery, I started installing/configuring things 1-by-1 and testing the Photo app after each step (VERY time-consuming).  Finally I discovered that the "Windows Home Server Connector" software is what seems to cause the problem.  The connector itself works as intended, but there seems to be some conflict with the TouchSmart Photo app that causes the error message to appear/persist.   For what it's worth, my Home Server is an HP MediaSmart Server EX475.
Anyone successfully connect their TouchSmart 610 to their home server and successfully run the TouchSmart Photo App?
Seems like this might be a bug of some sorts.

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

Similar Messages

  • ITunes very slow downloads of apps, podcasts, and music with library stored on a Windows Home Server (WHS)

    First, some history.  I setup a Windows Home Server (WHS) to store all my media.  I had configured itunes to store its library at \\server\music (this would be whatever shared folder you choose to store your music on for your WHS (and possibly NAS box)) and itunes was managing my library.  Once everything was imported into the server, I found I was getting horrible speeds for downloading apps, podcasts, and music.  We are talking 10 minutes to download a 14Mb file on a Fibre connection where I consistently get 25 to 30Mb / second performance.  Syncing my iPad / iPhones was a nightmare due to the time needed to be invested in it.
    The server, the PC, the router and corresponding switches were all gigabit and yet I was getting dial-up speeds.  Transfering files between systems was well within spec, but itunes was running as if it were using smoke signals.  I spent some time searching various user groups and support sites to no avail.
    To correct this, I only had to log onto the WHS (or NAS) and disable the iTunes Server.
    Reboot of the server, reboot your iTunes PC, and you are good to go.  My podcasts went from a 20 minute download time for an average episode of T.W.I.T. to about 7 to 10 seconds.

    UPDATE
    Please disregard the above.  While the above did improve performance for a short time, the problem returned.  I spent the next week running a full Spinrite on all 4 1TB HDDs that were in the NAS.  All drives were fine.  I then did some research on the individual drives, and it turns out that 3 of them were 7200RPM Hitachi's and the latest drive added was a 1TB Western Digital GREEN drive (WD10EADS).  This was the source of the issue.
    Additional information available at http://www.readynas.com/forum/viewtopic.php?f=24&t=32179
    I replaced the WD10EADS with another 7200RPM drive (seagate this time) and the NAS has been working flawlessly again (again, disregard the above post)

  • How can I istall Windows Server 2012 on a computer with Windows Home Server

    I have troubles to install Windows Server 2012 R2. Quite in the beginning of the install I get the following announcement:
    "Remove the installation media and restart your Computer so that Windows starts normally. Then, insert the installation media and restart the Computer."
    In the first resrart Windows Home Server is starting and I can't go on installing Server 2012.
    How can I bypass this problem?
    Best regards
    Nikorios
    Nikorios

    Hello,
    on the Windows Core machine itself follow:
    Determine the index number for a Server with a GUI image (for example, SERVERDATACENTER, not SERVERDATACENTERCORE) with Get-WindowsImage-ImagePath<path to wim>\install.wim.
    •Run Install-WindowsFeatureServer-Gui-Mgmt-Infra,Server-Gui-Shell –Restart –Source c:\mountdir\windows\winsxs
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Mavericks Broke connection with Windows Home Server - SMB

    I have the original version of Windows home server and all connections were fine over SMB, but after the upgrade to maverick I cannot connect to my shares.
    Before I used the guest account, so I created an addtional account for testing. I can see this account get locked out on the WHS, so I know its talking to it.
    I have 6tb of photos and itunes data on my server and looking for any way possible to configure my imac to connect again. When I try now there is no error, the user name and pw box just shakes and produces no errors.
    Please help
    Thanks,
    Tom

    Reinfire,
    I tried your terminal window patch but it failed to solve my issue.  Most people seem to be trying to connect to NAS devices from their Macs.  In my case, all my data is on a Drobo hanging off my Mac Pro.  I've been using SMB to share video from my Mac to both a Boxee Box and a Raspberry Pi running  Openelec (XBMC).  While both these devices can handle afp, the old Boxee Box is less than astute with afp so SMB was the method of choice for stability.
    Anyway, both devices can no longer see the SMB shares off the Mac Pro, even after your patch.  After runnig you patch, I restarted and the nsmb.conf file is created.  But, no luck on connecting with these apparently non SMB2 devices.
    I can change all my shares over the afp but this will take a lot of button pushing that I'd rather not do.  Any suggestions for this scenario?

  • Networking issues with Windows SBS Server 2003

    I have 3 G5 running on a recently installed 10.4.8, they were all previously running 10.3.9. They all connect to a network drive with folders that have color labels on them (only 2 blue and green). In 10.3.9 the labels were fine, now when the machine connects to the server the labels do not refresh utill you have been throught them and selected them all. I have tried delabeling and then relabeling them in 10.4 but it does not help. I have also tried it on another site and it does exactly the same. It also does not seem to matter what protcol you use to connect to the server (AFP, SMB, TCP/IP).
    Anyone come across this before and know any fixes?

    I dont really have much to offer here except that we use afp with our SBS server and this hasnt come up... on any of our 10.4.x machines.

  • Restoring Itunes library on a windows home server

    Help everyone! I have had my itunes library stored on my HP WHS for the past year. Over the holidays I reformatted my Imac HD as it was sooo slow. Reinstalled OSX 10.6 and the latest version of Itunes.
    I have my WHS mounted and have clicked on the option key while opening Itunes, I for the life of me can't get Itunes to see the remote library. The error I get when trying to open this library is: An Itunes library file could not be found in the folder "Itunes Share". Please chose a different folder.
    I have tried different folders within the share but no luck, I do notice there are files withing the music folder called "Musiclib.xml.lock" Is my problem that this file is locked and Itunes can't see it?
    Please help, I urgently need my music back and my Apple TV content back.

    I am trying to find the itunes library file on my windows home server. I believe all the files are on there. Yes it is logged into my WHS automatically, I can see the files on there ect.
    Yes the WHS management software is installed on the Mac.
    Just went to ilounge, but not sure what I should be doing. I've read about consolidating libraries but I can't open this library that is on my WHS.

  • Itunes issues with windows 8... laggy?

    anyone one else having abit a of laggy issue with playing music on windows 8?
    i just upgraded to windows 8 con. preview, and its great and fast.
    i use to have windows 7 and itunes never skipped a beat.
    i have a sony viao with an upgraded ram and ssd hdd.
    and its pretty fast.
    so i dont think its my computer and windows 8 seems to be fine.
    anyone else having this issue? but it only happens now and then.......
    NOTE:
    i have my music all copied to my sdd hdd aswell
    and thats all thats really on there as i have ext. hdd's.
    i have a average size library in itunes with around about 50gb of music.

    I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
    I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
    I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
    How?
    Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
    Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
    Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
    Further down under "Privilege level" check off "Run this program as an administrator".
    Click "Apply" and "OK".
    Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
    Hope I helped!

  • Itunes issues with Windows having to do with Apple's patent

    I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.

    I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
    I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
    I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
    How?
    Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
    Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
    Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
    Further down under "Privilege level" check off "Run this program as an administrator".
    Click "Apply" and "OK".
    Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
    Hope I helped!

  • Major Issues with Windows XP and Sound Blaster Audig

    As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

    Thanks for the helpful reply Dan
    I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
    However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
    I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

  • EA6500 Issue With Running HTTP Server

    I use Windows Home Server 2011 to host media and all sorts of things. One of the features is remote access over the web to files through a Dynamic DNS Service Homeserver.com. Currently whenever I try to connect even though my ports are forwarded properly, I get forwarded to the login page of the router to change router settings. Is there a setting I need to change that I'm missing? I've waiting over an hour for live chat and never got connected.

    Wanted to check where your NAT is. IF the ISP modems is bridged fully then single NAT should be on the router. Having double NAT can cause problems. 
    I presume the configuration of the ports maybe the issue on the router. How are the ports configured? Try using Port Triggering instead of PF. Disable uPnP if your using PF. 

  • Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

    I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

    I have called HP-Support and the answer was:
    «Thank you for contacting HP Active Chat Support.
    This is in continuation to our response with regards to your chat ID: 63381567
    As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
    Start the computer.
    Press the F10 key to enter the BIOS setup.
    Select Restore Defaults .
    Under Load Defaults , select Yes .
    Choose Save Changes and Exit .
    Under Save Changes and Exit , choose Yes .
    If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
    The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
    Open Control Panel .
    Expand View by: and select Large Icons .
    Click Administrative Tools .
    Double-click Services .
    Double-click Telephony .
    Under the General tab, expand Startup Type , then select Automatic .
    Click Apply , click Start , then click OK .
    Restart the system.
    If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
    The issue was not resolved.
    So I'm waiting for the release of the new driver...

  • Library Service Poartl 9.2 Sql Server 2000

    I am trying to add a repository and enable the Library Services. I have a XA driver datasource. I am using the MS sql driver. The connection all checks out. I can add the repository. I can add content, folders, types, but as soon as I turn on the Library Services I get an error
    <Aug 17, 2006 3:50:45 PM MDT> <Error> <PortalAdminTools> <BEA-415097> RepositoryException was thrown: Your repository does not support this operation.
    com.bea.content.RepositoryException: Your repository does not support this operation.
    at com.bea.content.manager.internal.WorkflowOpsBean.getWorkflowOps(Workf
    etc.....
    Does anyone have the library service working with a MS Sql server 2000 DB?
    Thanks
    Jeff

    Standard RepositoryImpl does not implement some advanced features(workflow, nested type, ..etc) in 9.2 content management. You should use the extended repository impl as you can.
    ExtendedRepositoryImpl is an implementation class of com.bea.content.spi.ExtendedRepository. The implmentation class is probably not exposed to the public, but you should find the javadoc of ExtendedRepository.

  • URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

    Hello SAP community,
    I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
    When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
    But when I click than on NWA (example), I am getting "http 500 server error".
    I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
    But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
    Than it is working without problems with Windows 7 and Internet Explorer.
    I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
    We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
    Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
    Thanks for your help.
    Best regards
    Carlos

    Hi all,
    I think I found the solution.
    The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
    That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
    When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
    Internet Explorer Options => Settings for compatibility view => Add domain
    Best regards
    Carlos

  • Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

    Hi,
    I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
    In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
    During the process, I faced some issue with the output server in printing the labels.
    When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
    The file is move to the error folder and an error file is getting generated which contains the error message as given below:
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
    2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
    The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
    I also verified the license and it is a valid licence.
    Kindly help me out in solving this issue.
    Thanks
    Senthil

    I assume this is too late to help you, but other might need a hint.  I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
    It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
    Hope this helps anyone....
    Vegard

  • Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

    Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

    You are going to have to contact Adobe on this one. We are other users.
    Sounds like it's not even an Apple question? Not sure.
    But the Adobe program changed, nothing changed in iTunes, right?

Maybe you are looking for