TouchSmart and dual monitors - lag time

I have the HP TouchSmart 320 PC and have set up the connection with a second and third monitor. I had to purchase a seperate piece to connect them. When I first connected them, they were working perfectly. However, I had to take my PC to get it cleaned due to some viruses. Now there is a huge lag time between my main PC and dual monitors. For example: if I play a video, it will not show up on the dual monitor but will play on my main PC. How can I fix this to where they sync up better?

Hello,
What is the exact model of the 320 PC you have?
What are the other monitors brand and models and what piece have you bought to connect those monitors to your unit?
Can you explain the setup or even provide pictures of the setup?
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Similar Messages

Laptop - Docking and Dual Monitors

Hi there,
I have a personal HP Dv4t Laptop, work has purchased for me a an Elitebook with docking station and dual monitors - I am trying to figure out when I am using my personal non work PC how to now connect this Laptop to least one of the monitors.
I have a single dongle connected to the docking staition for one monitor, but it's too short and only a single one and not to able attached to my personal laptop.
I know it's probably pretty easy if you are use to configuriung, but I am not. Any help is appreciated.
Thanks,
Eileencat

Hi ecat,
I wanted the product number so that I could check the specs on your notebook to see what ports you have on your notebook. However, your model is a CTO which means Custom to Order so I can't pull up the specs.
This HP document Using Two or More Monitors with One Computer will show you the types of video connections and how to extend the desktop. This will be a guideline to show you how to setup the external monitor.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HP Pavilion dv7-2250ed and dual monitor setup

Good evening,
Currently I own a HP Pavilion dv7-2250ed notebook using a dual monitor setup (notebook display + extra monitor)
I wondered if it would be possible to hook 2 monitors to this laptop? (notebook display + extra monitor + extra monitor)
If this causes the problem, the notebook display isn't requered.
Also, if not, is there a dockingstation for this brand which supports the above?
Kind Regards,
Cor van Noorloos
Edit: a note to the devs of these forums, using multiple tags is done by comma's, not by spaces. You might wish to rephrase this phrase.

wgarn wrote:
I have attempted to connect one monitor via HDMI and the other one via the VGA interface.
Using Windows 7 OS and "default configurations" (Control Panel\Appearance and Personalization\Display\Screen Resolution) it is possible to use both external monitors as desktop. However the laptop screen will go blank. So at any time it appears to be possible to have an extended desktop with only two screens.
- Does HP have any drivers/solutions that make it possible to extend the desktop from "Mobile PC" display to two additional desktops?
- Has anyone tried third party software (e.g.. UltraMon)?
- Is there a technical restriction (e.g.. Videocard capability)?
- How about using a Linux OS (e.g.. Ubuntu)?
- What external Hardware exists that would enable me to extend my desktop to three or more monitors simultaneously?
Many thanks in advance.
It's the graphics card and the number of physical connections available. You might have 3 connections (notebook display being one) but the graphics card likely does not support more than 2 monitors. Intel graphics only support 2, however you may be able to find some AMD chips that will support more however that would be a major upgrade.
________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

T420 and dual monitors using eGPC?

Hello all,
I just purchased my first ThinkPad, a T420 (4180 62U). So far I really love this machine.
Unfortunately for me, I didn't realize that this model does not support dual external displays with the built-in graphics processor.
I was wondering if anyone has had success with using a external graphics card along with the dock so that they can have the dual external monitors and the laptop screen running.
If so, what hardware should I be looking at? I would welcome any advice or recommendations.
Thanks
Zim

Thanks for the quick reply!
I haven't actually tried the dock yet. I was going to order one, then I read that you had to have the Nvida Optimus graphics card to actually do a dual monitor + laptop screen set-up which my ThinkPad does not have.
It's my understanding that the intel graphics HD 3000 allows another monitor, it just doesn't support tow external monitors.
Am I mistaken about this?
If so, then I'll be real happy, because using 3 screens will be a great help when using Cisco Packet Tracer simulator, reading instructions and taking notes.
Zim

Dual Monitor Lag in CS6

I've been running CS6 on my laptop for the past month with no issues regarding lag.
Today I decided to start using an old monitor as a second display, but whenever it's plugged in there is a huge amount of lag within Photoshop - so much lag that it is pretty much unusable.
From what I can tell, most other programs run fine with this setup (I've tried Sai and After Effects, and both are lag free).
I've tried searching this issue - and there's a lot about configuring refresh rates on the individual monitors so they're the same. Tried that - makes no difference.
Just wondering if anyone knew of a setting within Photoshop I could tweak to make it run better?

Sounds like your GPU is underpowered for 2 displays, or there is a problem with the driver.
Have you tried turning off GPU drawing in Photoshop's preferences?
What OS version are you using?
What GPU?

T60 Vista and Dual Monitor Support

I have a Lenovo T60 running on Vista 32-bit. I have the latest Video Drivers, but whenever my laptop comes out of hibernation I lose dual monitor support. Is there a solution to this problem?

The issue you're facing is a combination of a Vista "bug" and the video drivers. If you are using the latest video drivers, check to see that Vista is not managing the TMM - Vista has a bad habit of just remembering the initial setup, therefore when you take your computer off the dock, Vista doesn't like the change and will "conveniently" forget any variation of settings you may introduce.
Read this article on TMM for Vista (.doc file - read the first section)
Hope that helps
Message Edited by icantux on 04-28-2008 08:34 PM

Video resolution and dual monitor assistance

Trying to set up a show running on a windows XP Pro PC with dual monitor (ATI HD3870 card) so that videos run using Windows Media Player (or maybe something else if needed?) on the second monitor (actually a large projector).
The videos are synchronised to DMX lighting using software so can't just be run from a DVD.
All the videos have been developed using HDV anamorphic PAL 25fps footage but are rendered out using Premiere CS3 at 1280 x 720 (to keep 16:9 ratio at the highest resolution the projector/card (plus VGA extender cable) can handle.
The videos can be launched quite happily on a single monitor system at this resolution and in any format (WMV, AVI, etc). The videos are launched via software using DirectShow (this is 3rd party software). BUT, when outputting to the second monitor the video playback doesn't work at any resolution above 720 x 576. It works fine at 720 x 576, but obviously when projected the image is way smaller than we need.
Note that Windows Media Player will play higher resolution files on the dual monitor but not in full screen mode.
So, the question is where does the problem lie and how can we fix it? Can Windows Media Player not run higher resolutions in dual monitor mode? Do we need a specific graphics card to handle this? Is Windows XP an issue? (PS we had the PC running Vista previously but found that the TMM module in Vista was affecting the screen resolution settings). Do we need to render out of Premiere in some specific way? Has anyone got any experience of something similar?
Thanks!

Thanks guys. There's no issue with playing the video when launching it direct in Windows Media Player. Its just when launched from the DirectShow API. We've now got a 3rd party looking at that API and have a temporary fix.
So for future reference there are no specific problems with the rendering, codecs or resolutions, but there may be an issue with applications that launch high res media on to a 2nd monitor with the DirectShow API.
thanks

Touchsmart and Multiple Monitors

Has anyone out there actually connected an HP Touchsmart to multiple monitors? I am aware that USB-to-DVI or USB-to-VGA adapters are required. However, I learned from one adapter manufacturer out there (StarTech) that there are known issues with these adapters and the Touchsmart. Has anyone had success? esp with synchronizing video? What brand/type of adapter did you use? My goal is to get one Touchsmart and 4 extra monitors working together. thanks

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers that are all different. Without this information it may be difficult or impossible to assist you in resolving your issue.
You shouldn't need to disable the "Touch" feature to enable "Extended Display" mode... however if don't disable it, you may have issues getting to the extended display or you may experience unpredictable results. Using a mouse should allow you to reach the alternate screen. Depending on your hardware, there may or may not be an option to disable "Touch (Use your finger as an input)" in the Windows Control Panel. You can, however, disable the touchsceen input device in the Windows Device Manager as shown below;
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Mac Pro, Leopard 10.5.2, Photoshop CS3, 8800GT and Dual Monitors - Crashing

Hi, I received my Mac Pro (with Nvidia 8800GT) earlier this week and set it up with my dual monitors. I soon discovered that Photoshop CS3 crashes when scrolling a 'zoomed in' image with dual monitors. Photoshop is setup so that all palettes are on the smaller samsung monitor and the main image window I'm working on is on the 23" cinema display.
I've updated both the OS and CS3 but cannot solve the problem unless I switch to a single view setup, ie, drag all the palettes over to the larger monitor so that photoshop is no longer dual monitor. Then it works fine. Although it's a workaround, it's not an ideal situation. Has anyone else found this to be an issue? Have you found a solution?
I've also re-installed Photoshop, visited a genius bar and changed mice!
Thanks, any help would be appreciated.
-N

My Mac Pro had been running 3 Dell monitors on two NVIDIA GeForce 7300 GT cards for months, and with the (I think) Safari update all of a sudden the Mac freezes, 1 monitor displays garbledy gook, and the other is blank with a blinking power light. That is, until yesterday when the power light refused to come on. So I says to myself, "Self, how about testing them on my iBook?" The 1704FPT will not power on, plugged in to a computer or not. The 1707FP shakes like crazy when starting up on the iBook, then settles in and seems to work. Meanwhile, the SP2008WFP is working alone on the Mac Pro, but not totally trouble-free. What the heck is going on?

PS CS5 & Lightroom 4.3 and Dual monitors

Hi
I am using dual monitors.
When editing in CS5 I can work directly on the second screen containing the main image. All the palettes etc are on the 1st screen.
When using LR 4.3 it is not possible. The main image shows on the second screen and the cursor appears correctly on both screens.
However I cannot work directly on the main image.
As an example: If I wish to use the White Balance Selector, the "Pick a white target" grid box appears only on the screen containing the main elements and not on the main image.
On moving to the main image the cursor appears as a + sign and will only zoom in and out.
This situation is the same whether using a mouse or my Wacom tablet.
This does make editing a nightmare on LR 4.3 but simple on PS CS5.
Could anybody help.
Bob Spree
England

Bob
I am confused as to which screen/image you refer to as the main screen/image. Lightroom has limited options and no editing possibilities on its '2nd display'. These include Loupe view which may be what you call the main image. Screen 1 image is where to do all Lightroom editing in any module screen 2 is where the active image(s) is/are displayed as reference. CS5 may have different options for dual displays (including editing possibilities on what LR may use as screen 2, I do all editing on Screen 1). You need to identify which is screen 1 and which 2 - by turning off screen 2 in LR (click on the little screen symbol far left of the toolbar - click 'T' if it is not showing.

Windows Photo Viewer and dual monitor slideshow

Why does Slideshow only works on a main display?
why can't i move Photo Viewer to the secondary monitor then start slideshow there? if i do that in Win7 RC the secondary display will turn all black and the main one will start the slideshow.

that seems to have worked for me, but the inactive screen is still blackened, do you think the photo viewer doesn't fully support dual monitors? I also noticed the picture is the same display size as the primary monitor, as in whatever size is is during
a slideshow on the primary is the same when switched to the secondary.
I could juy st tap the window key to get the primary back, but then the unused portions of the secondary revert to the background...this seems like a strong candidate for a windows update that actually changes the way the OS works... can I has some cash
now?
hey, MS, WTF?
pictures viewer unable to work with few monitors?
i checked - by pressing "Window Key+Shift and tap either the left or right arrow"
it changes monitor, but other one hold black!
i checkerd win7, win2008srv, win2003

Dreamweaver and dual monitor

Dreamweaver version CS4
OS: MAC OS 10.5
Issue: I have dual monitors. Sometimes Dreamweaver will open the file browswer window in the left monitor and the title bar, or the top bar of the application is situated above the top of my monitor so I can't access the icons and tools, and there is no way to move the file browsing window because my mouse can't get to the top bar to adjust it. It's stuck on my left screen and I can't move the window.
In photoshop there's a "workspace", but in Dreamweaver I can't see a way to resituate the workspace so that the window in question will once again behave correctly. Any ideas?
Dreamweaver in all its bugginess is the only application that does this. It's like it has the monitor coordinates incorrect.
thanks

bellevuefineart wrote:
In photoshop there's a "workspace", but in Dreamweaver I can't see a way to resituate the workspace so that the window in question will once again behave correctly. Any ideas?
Dreamweaver also has a workspace menu. It's on the Application bar. In the Windows version, all the main menus are on the Application bar, but the Mac version respects the Mac convention of putting the program menus at the top of the monitor. Consequently, the Dreamweaver Application bar has very few items on it on a Mac, so it can be turned off.
To see the workspace menu, turn on the Application bar from the Window menu. Alternatively, use the Workspace Layout submenu of the Window menu, which has all the same options. You should be able to save your own workspace layout. If panels get out of alginment, select Reset <workspace name>.

10.6.3 and dual monitors- no mirroring!

Is anyone else having issues running dual monitors with 10.6.3? My Mac Book Pro works fine, but a black Mac Book will not mirror for power point. The local screen is distorted, the projector (2nd screen) still works. It will also work in extended mode, just not in mirror mode. Unplugging the display port restores the local monitor.
Anyone else having this issue?

It should give you a list of all resolutions that you can try. I have an external monitor hooked up to my white Macbook via mini-DVI to DVI, and have not had a problem. Try putting both in their maximum native resolution before mirroring, and then turn on mirroring. The computer should then find the best resolution for both.
If it doesn't, then you could try the 800x600 if it's available. I think this is the old standard.

Captivate and Dual Monitor Setups

I am running a dual monitor setup and it seems captivate does
not play too well in this environment. When i record a project, i
select the window that i want to record which is our software
product that is open in full screen. Resolution on the monitor is
1024x768. Id i click the button for Snap to fit, it does not snap
around the program, it captures some of the second monitor and the
Recording size shows 1032x746. I am unable to record a project in
1024x768. Anyone else have this issue??

I have dual monitors and capture on it frequently. I'm not
sure I've had
the problem you describe, but I almost always just set the
size manually
(which maybe I do because I had problems with the auto
settings).
So I select Custom Size the resize the red border to my
monitor settings...
Erik
Matt Leach wrote:
> I am running a dual monitor setup and it seems captivate
does not play too well
> in this environment. When i record a project, i select
the window that i want
> to record which is our software product that is open in
full screen. Resolution
> on the monitor is 1024x768. Id i click the button for
Snap to fit, it does not
> snap around the program, it captures some of the second
monitor and the
> Recording size shows 1032x746. I am unable to record a
project in 1024x768.
> Anyone else have this issue??
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Issue with dock and dual monitors

After unplugging my MacBook (Late 2008) from my Samsung External Monitor, my dock disappears and requires a "killall Dock" in Terminal to reappear. Does anyone know how I can fix this? Thanks.
PS- Running 10.5.8 and it happens all the time.
Thanks again.

could have something to do with how you are sharing your desktop b/t the laptop and the monitor... try resetting your monitor to "clone" or resetting your home screen to the laptop BEFORE unplugging the external monitor--

TouchSmart and dual monitors - lag time

Similar Messages

Maybe you are looking for