Touchsmart IQ 506 Freezes with nvidia drivers installed

Hello all, i have installed xp tablet edition on my Touchsmart iq506. every driver i located works great. the only problem i am having is with the Nvidia 9300m GS drivers, when i install the nvidia drivers the computer gets just a few seconds past the startup screen and just locks up. video looks great and works fine for about 10 seconds then thats it. i can boot to safe mode and uninstall the nvidia drivers and the computer works normal but with poor resolution so i am def lookin at a video driver problem here, any ideas would be greatly appreciated

bump??

Similar Messages

  • Yet another black screen on TTY with nvidia drivers

    Hi everyone,
    I've just changed my hardware and immediately installed a fresh Arch on it. Everything was fine until I installed the nvidia drivers: from that moment, once the boot is complete I get a normal (and working) GDM login screen, but I cannot switch to TTY with Ctrl+Alt+Fn. If I do, the screen goes black, but even worse, the monitor goes into sleep mode and I cannot get back to X (with Ctrl+Alt+F1).
    The machine is still working correctly though, as I can get access to it via SSH. The only problem is that I cannot use the virtual consoles unless I want to lose all X display until the next reboot (restarting it via systemctl restart gdm doesn't work).
    I also tried lightdm as a replacement but it's still the same.
    However, when using the nouveau driver, everything works as expected and I can switch from one TTY to another as much as I want. Of course, I'd like to keep the nvidia driver for various reasons.
    I found a lot of similar issues on the web and on this forum but none had this "additional little annoying thing" which is the sleep mode that can't be reverted but with a reboot.
    Any help will be appreciated. Thanks in advance.
    My specs:
    - MSI GeForce GTX760
    - Intel i7-4771
    - Gigabyte Z87-D3HP
    - Boot UEFI
    Last edited by nanawel (2014-03-24 14:54:03)

    I found that at https://help.ubuntu.com/community/UEFI
    Set up the BIOS in EFI or Legacy mode
    Some recent computers (>2011) allow to set up the boot either in UEFI mode or in Legacy (not-EFI) mode. The way to carry out this setting depends on the computers, but generally this setting is located in the "Boot order" tab of the BIOS (to access the BIOS screens, it is generally necessary to press a key during the PC startup).
    Note: Some BIOSes (e.g. American Megatrends' "Aptio", found on the Asus vivobook series) call Legacy mode "Compatibility Support Module" or simply "CSM".
    So if that applies to your machine, you might be able to boot Windows7 with UEFI mode and Arch+Nvidia with Legacy BIOS mode, without changing anything to the installation (the BIOS boot loader seems to be compatible wih GPT partition table, but there is to configure something for it to work see https://wiki.archlinux.org/index.php/GPT#BIOS_systems).
    If you can't do that and you really do not want to use the nouveau driver, you have no other choice than to wait for Nvidia to release an UEFI compatible driver, and not to work in tty console mode.
    You can also try to search how some has succeeded to use the efifb frame buffer with the nvidia driver, with special configurations.
    But, apart from the BIOS switch between boot loaders,  the two easiest approaches for you are either to use the nouveau driver or to not work in tty console mode when using the nvidia driver.
    Maybe you could find something better but it will be more complicated, I don't know if you have time and motivation to go this way...
    Nvidia will surely release a UEFI compatible driver sooner or later...
    Regards.
    Last edited by berbae (2014-03-26 14:42:01)

  • [SOLVED] Error with Nvidia Drivers (following the Beginner's Guide)

    I followed the beginner's installation guide and everything worked fine all the way up untill updating the kernel module dependencies using the "depmod -a" command..
    First I created the "xorg.conf" file with the "nvidia-xconfig" command and it said:
    Make sure all instances of DRI are commented out:
    #    Load        "dri"
    However, there are no instances of "dri" in my xorg.conf file, so i skipped this step and moved on.
    Next it said:
    Double check your /etc/X11/xorg.conf to make sure your default depth, horizontal sync, vertical refresh, and resolutions are acceptable.
    But I don't know what they should be set to, so I skipped this and moved on again.
    This is where everything fails:
    The next step is to use the following command to update the kernel module dependencies for the nVidia drivers.
    depmod -a
    But when i do that, it fails.
    Anyone know possibly why or has had this issue?
    Last edited by trusktr (2010-02-19 07:22:32)

    PirateJonno wrote:um, I don't think you can just 'do' a kernel update, you have to wait for a new one to come out first
    You can run any kernel version you wish on Arch, if you compile yourself, of course.
    trustktr wrote:Hmmmm, yeah, that is a good question: When to run depmod -a?
    When you first install the proprietary drivers. That's it, unless you will be maintaining a custom kernel system or something. In fact, the proprietary drivers might even run the depmod script themselves, I don't know, since it is a black box binary. Makes sense, but someone else would need to answer that.
    EDIT: Also wanted to add that many shell commands throw no output whatsoever upon successful completion. Therefore, the absence of error output can be interpreted as no error. Just FYI.
    Last edited by Misfit138 (2010-02-21 02:58:04)

  • [SOLVED] Extra resolutions for games with Nvidia drivers

    When using the nouveau drivers, games and other such applications will allow me to select any resolution my screens (one 1920x1080, the other 1680x1050-- the latter of which is to the left of the first) will support, as well as 3600x1080, the combined total (spanning both screens). For instance, I can make something like Tux Racer 1280x800, and either windowed or fullscreen. However, with the Nvidia proprietary drivers, the only resolutions that I can select are 1920x1080, 1680x1050, and 3600x1080. This prevents me from playing windowed games in such a way that they don't cover my whole screen, or playing fullscreen games at lower resolutions for higher performance. How can I use the Nvidia drivers and the "extra" resolutions? (Ideally, all those listed in the Xinerama output below)
    Xrandr outputs this:
    Screen 0: minimum 8 x 8, current 3600 x 1080, maximum 16384 x 16384
    DVI-I-0 connected 1920x1080+1680+0 (normal left inverted right x axis y axis) 510mm x 287mm
    1920x1080 60.0*+
    1680x1050 60.0
    1600x1200 60.0
    1440x900 59.9
    1400x1050 74.8 60.0
    1280x1024 75.0 60.0
    1280x960 60.0
    1280x800 59.8
    1152x864 75.0
    1024x768 75.0 70.1 60.0
    832x624 74.6
    800x600 75.0 72.2 60.3 56.2
    700x525 149.5 120.0
    640x480 75.0 72.8 59.9
    512x384 140.1 120.0
    400x300 144.4
    320x240 145.6 120.1
    DVI-I-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
    1680x1050 59.9*+ 60.0
    1440x900 75.0 59.9
    1400x1050 60.0
    1280x1024 75.0 60.0
    1280x960 60.0
    1152x864 75.0
    1024x768 75.0 70.1 60.0
    832x624 74.6
    800x600 75.0 72.2 60.3 56.2
    700x525 149.5 120.0
    640x480 75.0 72.8 59.9
    512x384 140.1 120.0
    400x300 144.4
    320x240 145.6 120.1
    DVI-I-2 disconnected (normal left inverted right x axis y axis)
    HDMI-0 disconnected (normal left inverted right x axis y axis)
    DVI-I-3 disconnected (normal left inverted right x axis y axis)
    My xorg.conf is:
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    FontPath "/usr/share/fonts/local"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Acer G235H"
    HorizSync 30.0 - 83.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTS 450"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "CRT-0"
    Option "TwinViewOrientation" "CRT-1 LeftOf CRT-0"
    Option "metamodes" "CRT-0: nvidia-auto-select, CRT-1: nvidia-auto-select"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Last edited by DrKillPatient (2012-07-06 19:29:15)

    brebs wrote:
    Maybe these help:
    http://www.nvnews.net/vbulletin/showthread.php?t=184711
    http://www.nvnews.net/vbulletin/showthread.php?t=184968
    Thanks. The first link worked, in the sense that my games now have all those resolution options, but now there's a new bug.
    To future readers: a solution has been found for this bug as well, see below.
    My metamodes setting now reads:
    Option "metamodes" "CRT-0: nvidia-auto-select, CRT-1: nvidia-auto-select; nvidia-auto-select {ViewPortI n=1920x1080}; nvidia-auto-select {ViewPortIn=1680x1050}; [b]nvidia-auto-select {ViewPortIn=1600x1200};[/b] nvidia-auto-sele ct {ViewPortIn=1440x900}; nvidia-auto-select {ViewPortIn=1400x1050}; nvidia-auto-select {ViewPortIn=1280x1024}; nvi dia-auto-select {ViewPortIn=1280x960}; nvidia-auto-select {ViewPortIn=1280x800}; nvidia-auto-select {ViewPortIn=115 2x864}; nvidia-auto-select {ViewPortIn=1024x768}; nvidia-auto-select {ViewPortIn=832x624}; nvidia-auto-select {View PortIn=800x600}; nvidia-auto-select {ViewPortIn=700x525}; nvidia-auto-select {ViewPortIn=640x480}; nvidia-auto-sele ct {ViewPortIn=512x384}; nvidia-auto-select {ViewPortIn=400x300}; nvidia-auto-select {ViewPortIn=320x240}
    Because I now have included a resolution whose height is 1200 (or so I suppose-- if I remove that part, the issue does not occur), this happens:
    Xrandr output:
    Screen 0: minimum 8 x 8, current 3600 x 1200, maximum 16384 x 16384
    My X screen has the right length, but the wrong height! Now, my desktop seems to span the right area (3600x1080), but if I move my mouse to the bottom of that area, it pans down another 120 pixels. In that area, there's just graphical gibberish, often whatever I had on the screen last time.
    If I use Xrandr to set my screens' output, it works again, butthere a solution within the Nvidia driver settings...
    EDIT: It occurs to me that the setting seems to be taking the largest possible resolution for the X screen based on those metamodes.
    EDIT 2: This is likely intended behavior. The proper virtual resolution (X screen resolution) may be restored by adding
    Virtual 3600 1080
    to the "Display" subsection under the "Screen" section.
    I'll mark this as solved.
    Here's my working xorg.conf, by the way. I've posted only the "Screen" section because that's all I've changed. The rest is in my first post.
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "CRT-0"
    Option "TwinViewOrientation" "CRT-1 LeftOf CRT-0"
    Option "metamodes" "CRT-0: nvidia-auto-select, CRT-1: nvidia-auto-select; nvidia-auto-select {ViewPortIn=1920x1080}; nvidia-auto-select {ViewPortIn=1680x1050}; nvidia-auto-select {ViewPortIn=1600x1200}; nvidia-auto-select {ViewPortIn=1440x900}; nvidia-auto-select {ViewPortIn=1400x1050}; nvidia-auto-select {ViewPortIn=1280x1024}; nvidia-auto-select {ViewPortIn=1280x960}; nvidia-auto-select {ViewPortIn=1280x800}; nvidia-auto-select {ViewPortIn=1152x864}; nvidia-auto-select {ViewPortIn=1024x768}; nvidia-auto-select {ViewPortIn=832x624}; nvidia-auto-select {ViewPortIn=800x600}; nvidia-auto-select {ViewPortIn=700x525}; nvidia-auto-select {ViewPortIn=640x480}; nvidia-auto-select {ViewPortIn=512x384}; nvidia-auto-select {ViewPortIn=400x300}; nvidia-auto-select {ViewPortIn=320x240}"
    SubSection "Display"
    Virtual 3600 1080
    Depth 24
    EndSubSection
    EndSection
    Last edited by DrKillPatient (2012-07-06 19:31:18)

  • SCCM Driver Injection : What am I missing? Need help with getting drivers installing correctly in my environment.

    Everyone,
    I'm not new to using SCCM, but i'm VERY new to setting up and managing it.  I have just laid it down for the school district that I manage, and i'm loving it.  Imaging is going great, all but one thing now...drivers installing.
    Let me tell you what I've been doing, so hopefully a kind soul out there can tell me where my logic of the driver "injection" process is lacking and might can fill in some gaps. 
    I downloaded all drivers pertaining to the 7-8 series of computers we have in our environment currently, and imported them based on a criteria such as this:
    x86.LenovoEdge71.Desktop
    x86.DellOpti755.Desktop
    so forth and so on
    I created packages based on the same exact naming scheme.  I update my distribution point at the end of the import, and all the drivers/packages/categories are in place.  When I go to Monitoring/Distribution Status/Content Status, all of my packages
    show up , but under targeted it says 0.
    My thoughts from reading online, is I upload all these drivers and during my task sequence where it says it's "applying device drivers" it's set to "install only the best matched compatible drivers" and "consider drivers from all
    categories".  I also checked "do unattended installation of unsigned drivers no versions of Windows where this is allowed".
    so correct me if my thinking is incorrect, it should search through all series of the computers we have in our environment and grab the best drivers from the overall database.  Is this not right?
    The reason I ask this, is we have a few hundred HP 6000 Pro desktops.  WHen I image them, it comes up with 2 unknown devices.  OF these, I can manually point them at the folder from which I uploaded the drivers for this series/category and it installs
    100% successfully...MANUALLY.  What's the reasoning behind this?
    I can't help but think there's something missing in my process / logic and I need to be set straight. 
    Can someone out there tell me what i'm doing wrong?  We're planning a district-wide re-imaging before summer's over, and the clock's ticking...but the drivers being installed are all that's keeping us from starting our migrations.
    Any help on this is GREATLY appreciated, thank you very much!

    You have setup everything correct, but for your desired result you need to use "Apply Driver Package" Task rather than "Auto Apply Drivers".
    Auto Apply drivers will install the best matched/compatible drivers for only the PNP devices.For more info on this:http://technet.microsoft.com/en-us/library/bb680990.aspx
    Whereas "Apply Driver Package" would install all drivers you have in the package and hence you don't see the unknown drivers in device manager. For more info on this: http://technet.microsoft.com/en-us/library/bb680403.aspx
    If you have multiple models, create this task for each model individually and then associate with a WMI query condition under Options tab to check the manufacturer/model
    Example: Select * from Win32_ComputerSystem where Manufacturer = "HP" and Model Like "6000%"
    Regards,
    Manohar Pusala

  • [SOLVED] Xorg freeze with nvidia GeForce 210 when resizing terminal

    Hello,
    I am working on Archlinux. My computer freeze when I resize a terminal window.
    To reproduce the problem, I follow the below steps :
         1- launch openbox (with tint2, xcompmgr and nitrogen)
         2- start the "terminal" console emulator (with true transparent background)
         3- launch opera and go to a website which take a while to load (with a lot of data) (I used http://www.lemonde.fr)
         4- while the website is loading, switch to the terminal window and double click on the title bar to maximize it
         5- the box freeze
    I am not able to take the control back. I cannot exit or kill Xorg / Openbox. I cannot switch to a text terminal (ttyx). No key sequence is working.
    Only a hard reset of the box is working.
    I have tried to disable the transparent background of the terminal window without success.
    I have tried to not start xcompmgr without success.
    The problem also occurs with rxvt-unicode instead of terminal.
    It seems the problem happens more often when using console emulator based on vte.
    vte itself has the same issue.
    The only workaround I have found is to disable the harware acceleration with the below parameter in the xorg.conf file:
    Option    "RenderAccel"    "true"
    The problem with this workaround are poor graphical performances.
    Could you please let me know if you have any idea / clue to identify / fix this problem ?
    Thanks and regards
    uname -a
    Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz GenuineIntel GNU/Linux
    versions
    nvidia 270.41.06-1
    nvidia-utils 270.41.06-1
    kernel26 2.6.38.4-1
    openbox 3.4.11.2-2
    xcompmgr 1.1.5-1
    .xinitrc
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    # exec gnome-session
    # exec startkde
    # exec startxfce4
    # ...or the Window Manager of your choice
    exec ck-launch-session openbox-session
    .config/openbox/autostart.sh
    # This shell script is run before Openbox launches.
    # Environment variables set here are passed to the Openbox session.
    # Set a background color
    BG=""
    if which hsetroot >/dev/null 2>&1; then
    BG=hsetroot
    else
    if which esetroot >/dev/null 2>&1; then
    BG=esetroot
    else
    if which xsetroot >/dev/null 2>&1; then
    BG=xsetroot
    fi
    fi
    fi
    test -z $BG || $BG -solid "#303030"
    # D-bus
    if which dbus-launch >/dev/null 2>&1 && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
    eval `dbus-launch --sh-syntax --exit-with-session`
    fi
    # Make GTK apps look and behave how they were set up in the gnome config tools
    if test -x /usr/libexec/gnome-settings-daemon >/dev/null; then
    /usr/libexec/gnome-settings-daemon &
    elif which gnome-settings-daemon >/dev/null 2>&1; then
    gnome-settings-daemon &
    # Make GTK apps look and behave how they were set up in the XFCE config tools
    elif which xfce-mcs-manager >/dev/null 2>&1; then
    xfce-mcs-manager n &
    fi
    # Preload stuff for KDE apps
    if which start_kdeinit >/dev/null 2>&1; then
    LD_BIND_NOW=true start_kdeinit --new-startup +kcminit_startup &
    fi
    # Run XDG autostart things. By default don't run anything desktop-specific
    # See xdg-autostart --help more info
    DESKTOP_ENV="OPENBOX"
    if which /usr/lib/openbox/xdg-autostart >/dev/null 2>&1; then
    /usr/lib/openbox/xdg-autostart $DESKTOP_ENV
    fi
    xcompmgr &
    nitrogen --set-zoom-fill /mnt/data/pictures/flower.jpg &
    tint2 &
    xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "extmod"
    Load "glx"
    Load "record"
    Load "dbe"
    Load "dri2"
    EndSection
    Section "InputClass"
    Identifier "Keyboard Defaults"
    MatchIsKeyboard "yes"
    Option "XkbLayout" "fr"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    Option "RenderAccel" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Xorg.0.log
    [ 485.566]
    X.Org X Server 1.10.1
    Release Date: 2011-04-15
    [ 485.566] X Protocol Version 11, Revision 0
    [ 485.566] Build Operating System: Linux 2.6.38-ARCH i686
    [ 485.566] Current Operating System: Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686
    [ 485.566] Kernel command line: root=/dev/sda3 ro
    [ 485.566] Build Date: 16 April 2011 12:05:35PM
    [ 485.566]
    [ 485.566] Current version of pixman: 0.20.2
    [ 485.567] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 485.567] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 485.567] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 27 20:00:28 2011
    [ 485.567] (==) Using config file: "/etc/X11/xorg.conf"
    [ 485.568] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 485.568] (==) ServerLayout "X.org Configured"
    [ 485.568] (**) |-->Screen "Screen0" (0)
    [ 485.568] (**) | |-->Monitor "Monitor0"
    [ 485.568] (**) | |-->Device "Card0"
    [ 485.568] (**) |-->Input Device "Mouse0"
    [ 485.568] (**) |-->Input Device "Keyboard0"
    [ 485.568] (==) Automatically adding devices
    [ 485.568] (==) Automatically enabling devices
    [ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 485.568] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 485.568] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 485.568] (**) Extension "Composite" is enabled
    [ 485.568] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 485.568] (WW) Disabling Mouse0
    [ 485.568] (WW) Disabling Keyboard0
    [ 485.568] (II) Loader magic: 0x81f4ee0
    [ 485.568] (II) Module ABI versions:
    [ 485.568] X.Org ANSI C Emulation: 0.4
    [ 485.568] X.Org Video Driver: 10.0
    [ 485.568] X.Org XInput driver : 12.2
    [ 485.568] X.Org Server Extension : 5.0
    [ 485.569] (--) PCI:*(0:1:0:0) 10de:0a65:1043:8334 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
    [ 485.569] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 485.569] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "dri" will be loaded by default.
    [ 485.569] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) LoadModule: "extmod"
    [ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 485.569] (II) Module extmod: vendor="X.Org Foundation"
    [ 485.569] compiled for 1.10.1, module version = 1.0.0
    [ 485.569] Module class: X.Org Server Extension
    [ 485.569] ABI class: X.Org Server Extension, version 5.0
    [ 485.569] (II) Loading extension MIT-SCREEN-SAVER
    [ 485.569] (II) Loading extension XFree86-VidModeExtension
    [ 485.569] (II) Loading extension XFree86-DGA
    [ 485.569] (II) Loading extension DPMS
    [ 485.569] (II) Loading extension XVideo
    [ 485.569] (II) Loading extension XVideo-MotionCompensation
    [ 485.569] (II) Loading extension X-Resource
    [ 485.569] (II) LoadModule: "glx"
    [ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 485.588] (II) Module glx: vendor="NVIDIA Corporation"
    [ 485.588] compiled for 4.0.2, module version = 1.0.0
    [ 485.589] Module class: X.Org Server Extension
    [ 485.589] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:11:28 PDT 2011
    [ 485.589] (II) Loading extension GLX
    [ 485.589] (II) LoadModule: "record"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 485.589] (II) Module record: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.13.0
    [ 485.589] Module class: X.Org Server Extension
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension RECORD
    [ 485.589] (II) LoadModule: "dbe"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 485.589] (II) Module dbe: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.0.0
    [ 485.589] Module class: X.Org Server Extension
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension DOUBLE-BUFFER
    [ 485.589] (II) LoadModule: "dri2"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 485.589] (II) Module dri2: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.2.0
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension DRI2
    [ 485.589] (II) LoadModule: "dri"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 485.589] (II) Module dri: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.0.0
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension XFree86-DRI
    [ 485.589] (II) LoadModule: "nvidia"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 485.590] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 485.590] compiled for 4.0.2, module version = 1.0.0
    [ 485.590] Module class: X.Org Video Driver
    [ 485.590] (II) NVIDIA dlloader X Driver 270.41.06 Mon Apr 18 14:55:51 PDT 2011
    [ 485.590] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 485.590] (--) using VT number 7
    [ 485.593] (II) Loading sub module "fb"
    [ 485.593] (II) LoadModule: "fb"
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 485.593] (II) Module fb: vendor="X.Org Foundation"
    [ 485.593] compiled for 1.10.1, module version = 1.0.0
    [ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 485.593] (II) Loading sub module "wfb"
    [ 485.593] (II) LoadModule: "wfb"
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 485.593] (II) Module wfb: vendor="X.Org Foundation"
    [ 485.593] compiled for 1.10.1, module version = 1.0.0
    [ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 485.593] (II) Loading sub module "ramdac"
    [ 485.593] (II) LoadModule: "ramdac"
    [ 485.593] (II) Module "ramdac" already built-in
    [ 485.593] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 485.593] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 485.593] (==) NVIDIA(0): RGB weight 888
    [ 485.593] (==) NVIDIA(0): Default visual is TrueColor
    [ 485.593] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 485.593] (**) NVIDIA(0): Option "RenderAccel" "true"
    [ 485.593] (**) NVIDIA(0): Enabling RENDER acceleration
    [ 485.953] (II) NVIDIA(GPU-0): Display (LG Electronics L222W (CRT-0)) does not support NVIDIA
    [ 485.953] (II) NVIDIA(GPU-0): 3D Vision stereo.
    [ 485.986] (II) NVIDIA(GPU-0): Display (PANASONIC-TV (DFP-1)) does not support NVIDIA 3D
    [ 485.986] (II) NVIDIA(GPU-0): Vision stereo.
    [ 485.987] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
    [ 485.987] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 485.987] (--) NVIDIA(0): VideoBIOS: 70.18.39.00.17
    [ 485.987] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 485.987] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 485.987] (--) NVIDIA(0): Connected display device(s) on GeForce 210 at PCI:1:0:0
    [ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0)
    [ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1)
    [ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0): 400.0 MHz maximum pixel clock
    [ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): 165.0 MHz maximum pixel clock
    [ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): Internal Single Link TMDS
    [ 486.026] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 486.026] (==) NVIDIA(0):
    [ 486.026] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 486.026] (==) NVIDIA(0): will be used as the requested mode.
    [ 486.026] (==) NVIDIA(0):
    [ 486.026] (II) NVIDIA(0): Validated modes:
    [ 486.026] (II) NVIDIA(0): "nvidia-auto-select"
    [ 486.026] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
    [ 486.054] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
    [ 486.054] (--) NVIDIA(0): option
    [ 486.054] (--) Depth 24 pixmap format is 32 bpp
    [ 486.054] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 486.056] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 486.056] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 486.056] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 486.056] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 486.056] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 486.056] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 486.056] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 486.056] (II) NVIDIA(0): Config Options in the README.
    [ 486.058] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 486.286] (II) Loading extension NV-GLX
    [ 486.314] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 486.314] (==) NVIDIA(0): Backing store disabled
    [ 486.314] (==) NVIDIA(0): Silken mouse enabled
    [ 486.314] (==) NVIDIA(0): DPMS enabled
    [ 486.314] (II) Loading extension NV-CONTROL
    [ 486.315] (II) Loading extension XINERAMA
    [ 486.315] (II) Loading sub module "dri2"
    [ 486.315] (II) LoadModule: "dri2"
    [ 486.315] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 486.315] (II) Module dri2: vendor="X.Org Foundation"
    [ 486.315] compiled for 1.10.1, module version = 1.2.0
    [ 486.315] ABI class: X.Org Server Extension, version 5.0
    [ 486.315] (II) NVIDIA(0): [DRI2] Setup complete
    [ 486.315] (==) RandR enabled
    [ 486.315] (II) Initializing built-in extension Generic Event Extension
    [ 486.315] (II) Initializing built-in extension SHAPE
    [ 486.315] (II) Initializing built-in extension MIT-SHM
    [ 486.315] (II) Initializing built-in extension XInputExtension
    [ 486.315] (II) Initializing built-in extension XTEST
    [ 486.315] (II) Initializing built-in extension BIG-REQUESTS
    [ 486.315] (II) Initializing built-in extension SYNC
    [ 486.315] (II) Initializing built-in extension XKEYBOARD
    [ 486.315] (II) Initializing built-in extension XC-MISC
    [ 486.315] (II) Initializing built-in extension SECURITY
    [ 486.315] (II) Initializing built-in extension XINERAMA
    [ 486.315] (II) Initializing built-in extension XFIXES
    [ 486.315] (II) Initializing built-in extension RENDER
    [ 486.315] (II) Initializing built-in extension RANDR
    [ 486.315] (II) Initializing built-in extension COMPOSITE
    [ 486.315] (II) Initializing built-in extension DAMAGE
    [ 486.317] (II) Initializing extension GLX
    [ 486.364] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 486.364] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 486.364] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 486.364] (II) LoadModule: "evdev"
    [ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.365] (II) Module evdev: vendor="X.Org Foundation"
    [ 486.365] compiled for 1.10.0, module version = 2.6.0
    [ 486.365] Module class: X.Org XInput Driver
    [ 486.365] ABI class: X.Org XInput driver, version 12.2
    [ 486.365] (II) Using input driver 'evdev' for 'Power Button'
    [ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.365] (**) Power Button: always reports core events
    [ 486.365] (**) Power Button: Device: "/dev/input/event1"
    [ 486.376] (--) Power Button: Found keys
    [ 486.376] (II) Power Button: Configuring as keyboard
    [ 486.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 486.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 486.376] (**) Option "xkb_rules" "evdev"
    [ 486.376] (**) Option "xkb_model" "evdev"
    [ 486.376] (**) Option "xkb_layout" "fr"
    [ 486.397] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 486.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 486.397] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 486.397] (II) Using input driver 'evdev' for 'Power Button'
    [ 486.397] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.397] (**) Power Button: always reports core events
    [ 486.397] (**) Power Button: Device: "/dev/input/event0"
    [ 486.413] (--) Power Button: Found keys
    [ 486.413] (II) Power Button: Configuring as keyboard
    [ 486.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [ 486.413] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 486.413] (**) Option "xkb_rules" "evdev"
    [ 486.413] (**) Option "xkb_model" "evdev"
    [ 486.413] (**) Option "xkb_layout" "fr"
    [ 486.415] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2)
    [ 486.415] (II) No input driver/identifier specified (ignoring)
    [ 486.418] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
    [ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
    [ 486.418] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
    [ 486.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.418] (**) Microsoft Wired Keyboard 600: always reports core events
    [ 486.418] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
    [ 486.430] (--) Microsoft Wired Keyboard 600: Found keys
    [ 486.430] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
    [ 486.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.0/input/input3/event3"
    [ 486.430] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
    [ 486.430] (**) Option "xkb_rules" "evdev"
    [ 486.430] (**) Option "xkb_model" "evdev"
    [ 486.430] (**) Option "xkb_layout" "fr"
    [ 486.430] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
    [ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
    [ 486.430] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
    [ 486.430] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.430] (**) Microsoft Wired Keyboard 600: always reports core events
    [ 486.430] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found relative axes
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found absolute axes
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found keys
    [ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as mouse
    [ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
    [ 486.446] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
    [ 486.446] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
    [ 486.446] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 486.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.1/input/input4/event4"
    [ 486.446] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
    [ 486.446] (**) Option "xkb_rules" "evdev"
    [ 486.446] (**) Option "xkb_model" "evdev"
    [ 486.446] (**) Option "xkb_layout" "fr"
    [ 486.447] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
    [ 486.447] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
    [ 486.447] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
    [ 486.447] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
    [ 486.447] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
    [ 486.447] (II) No input driver/identifier specified (ignoring)
    [ 486.447] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
    [ 486.447] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 486.447] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    [ 486.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.447] (**) Logitech USB Optical Mouse: always reports core events
    [ 486.447] (**) Logitech USB Optical Mouse: Device: "/dev/input/event5"
    [ 486.473] (--) Logitech USB Optical Mouse: Found 12 mouse buttons
    [ 486.473] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 486.473] (--) Logitech USB Optical Mouse: Found relative axes
    [ 486.473] (--) Logitech USB Optical Mouse: Found x and y relative axes
    [ 486.473] (II) Logitech USB Optical Mouse: Configuring as mouse
    [ 486.473] (II) Logitech USB Optical Mouse: Adding scrollwheel support
    [ 486.473] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 486.473] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 486.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/input/input5/event5"
    [ 486.473] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
    [ 486.473] (II) Logitech USB Optical Mouse: initialized for relative axes.
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 486.473] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    [ 486.473] (II) No input driver/identifier specified (ignoring)
    [ 525.530] (WW) NVIDIA(0): The NVIDIA X driver has encountered too many errors. Falling
    [ 525.530] (WW) NVIDIA(0): back to write-back cached memory.
    dmesg.txt
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110415 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
    [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238 09/30/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-DFFFF uncachable
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 01800000
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
    [ 0.000000] RAMDISK: 7fdd0000 - 7ff80000
    [ 0.000000] Allocated new RAMDISK: 3764e000 - 377fd262
    [ 0.000000] Move RAMDISK from 000000007fdd0000 - 000000007ff7f261 to 3764e000 - 377fd261
    [ 0.000000] ACPI: RSDP 000fae70 00024 (v02 ACPIAM)
    [ 0.000000] ACPI: XSDT 7ff90100 0004C (v01 MSTEST OEMXSDT 09000830 MSFT 00000097)
    [ 0.000000] ACPI: FACP 7ff90290 000F4 (v03 MSTEST OEMFACP 09000830 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 7ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
    [ 0.000000] ACPI: FACS 7ff9e000 00040
    [ 0.000000] ACPI: APIC 7ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 7ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 7ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
    [ 0.000000] ACPI: HPET 7ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1159MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007ff90
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0007ff90
    [ 0.000000] On node 0 totalpages: 524062
    [ 0.000000] free_area_init_node: node 0, pgdat c1450b00, node_mem_map f664d200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2320 pages used for memmap
    [ 0.000000] HighMem zone: 294530 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27392 r0 d21760 u1048576
    [ 0.000000] pcpu-alloc: s27392 r0 d21760 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519966
    [ 0.000000] Kernel command line: root=/dev/sda3 ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 10483200 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff90)
    [ 0.000000] Memory: 2061020k/2096704k available (3182k kernel code, 35228k reserved, 1259k data, 424k init, 1187400k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc1457000 - 0xc14c1000 ( 424 kB)
    [ 0.000000] .data : 0xc131bacb - 0xc1456a00 (1259 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc131bacb (3182 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f500c000 soft=f500e000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3066.221 MHz processor.
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6134.96 BogoMIPS (lpj=10220736)
    [ 0.003418] pid_max: default: 32768 minimum: 301
    [ 0.003486] Security Framework initialized
    [ 0.003528] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006682] Mount-cache hash table entries: 512
    [ 0.006865] Initializing cgroup subsys ns
    [ 0.006906] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.006960] Initializing cgroup subsys cpuacct
    [ 0.007007] Initializing cgroup subsys memory
    [ 0.007052] Initializing cgroup subsys devices
    [ 0.007092] Initializing cgroup subsys freezer
    [ 0.007133] Initializing cgroup subsys net_cls
    [ 0.007172] Initializing cgroup subsys blkio
    [ 0.007238] CPU: Physical Processor ID: 0
    [ 0.007277] CPU: Processor Core ID: 0
    [ 0.007317] mce: CPU supports 6 MCE banks
    [ 0.007361] CPU0: Thermal monitoring enabled (TM2)
    [ 0.007402] using mwait in idle threads.
    [ 0.008216] ACPI: Core revision 20110112
    [ 0.013386] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.013726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.046907] CPU0: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz stepping 0a
    [ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.049997] ... version: 2
    [ 0.049997] ... bit width: 40
    [ 0.049997] ... generic registers: 2
    [ 0.049997] ... value mask: 000000ffffffffff
    [ 0.049997] ... max period: 000000007fffffff
    [ 0.049997] ... fixed-purpose events: 3
    [ 0.049997] ... event mask: 0000000700000003
    [ 0.056745] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.070012] CPU 1 irqstacks, hard=f50d6000 soft=f50d8000
    [ 0.070017] Booting Node 0, Processors #1
    [ 0.006666] Initializing CPU#1
    [ 0.166676] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.169997] Brought up 2 CPUs
    [ 0.170040] Total of 2 processors activated (12270.81 BogoMIPS).
    [ 0.171248] devtmpfs: initialized
    [ 0.171248] NET: Registered protocol family 16
    [ 0.171248] ACPI: bus type pci registered
    [ 0.171248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.171248] PCI: not using MMCONFIG
    [ 0.171248] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
    [ 0.171248] PCI: Using configuration type 1 for base access
    [ 0.171248] bio: create slab <bio-0> at 0
    [ 0.173388] ACPI: EC: Look up EC in DSDT
    [ 0.174194] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.179022] ACPI: SSDT 7ff9e0c0 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
    [ 0.179316] ACPI: Dynamic OEM Table Load:
    [ 0.179408] ACPI: SSDT (null) 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
    [ 0.179643] ACPI: SSDT 7ff9e2d0 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
    [ 0.179932] ACPI: Dynamic OEM Table Load:
    [ 0.180025] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
    [ 0.180248] ACPI: Interpreter enabled
    [ 0.180292] ACPI: (supports S0 S3 S4 S5)
    [ 0.180445] ACPI: Using IOAPIC for interrupt routing
    [ 0.180500] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.180904] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.180958] PCI: Using MMCONFIG for extended config space
    [ 0.185933] ACPI: No dock devices found.
    [ 0.185973] HEST: Table not found.
    [ 0.186014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.186114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.186260] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.186304] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.186346] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.186398] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.186450] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
    [ 0.186509] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
    [ 0.186539] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
    [ 0.186562] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.186564] pci 0000:00:01.0: PME# disabled
    [ 0.186592] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.186625] pci 0000:00:1a.0: reg 20: [io 0xa880-0xa89f]
    [ 0.186660] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.186692] pci 0000:00:1a.1: reg 20: [io 0xac00-0xac1f]
    [ 0.186724] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.186740] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
    [ 0.186797] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.186801] pci 0000:00:1a.7: PME# disabled
    [ 0.186817] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.186829] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
    [ 0.186873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.186876] pci 0000:00:1b.0: PME# disabled
    [ 0.186891] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.186935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.186938] pci 0000:00:1c.0: PME# disabled
    [ 0.186956] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
    [ 0.187000] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.187003] pci 0000:00:1c.4: PME# disabled
    [ 0.187019] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
    [ 0.187063] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.187066] pci 0000:00:1c.5: PME# disabled
    [ 0.187082] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.187114] pci 0000:00:1d.0: reg 20: [io 0xa400-0xa41f]
    [ 0.187137] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.187170] pci 0000:00:1d.1: reg 20: [io 0xa480-0xa49f]
    [ 0.187193] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.187226] pci 0000:00:1d.2: reg 20: [io 0xa800-0xa81f]
    [ 0.187256] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.187272] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
    [ 0.187329] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.187333] pci 0000:00:1d.7: PME# disabled
    [ 0.187346] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.187393] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
    [ 0.187462] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
    [ 0.188664] pci 0000:00:1f.2: [8086:2821] type 0 class 0x000106
    [ 0.188677] pci 0000:00:1f.2: reg 10: [io 0xa080-0xa087]
    [ 0.188684] pci 0000:00:1f.2: reg 14: [io 0xa000-0xa003]
    [ 0.188690] pci 0000:00:1f.2: reg 18: [io 0x9c00-0x9c07]
    [ 0.188696] pci 0000:00:1f.2: reg 1c: [io 0x9880-0x9883]
    [ 0.188703] pci 0000:00:1f.2: reg 20: [io 0x9800-0x981f]
    [ 0.188709] pci 0000:00:1f.2: reg 24: [mem 0xf9fff000-0xf9fff7ff]
    [ 0.188733] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.188736] pci 0000:00:1f.2: PME# disabled
    [ 0.188747] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [ 0.188756] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
    [ 0.188778] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
    [ 0.188824] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
    [ 0.188832] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.188841] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.188849] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
    [ 0.188856] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f]
    [ 0.188862] pci 0000:01:00.0: reg 30: [mem 0xfbc00000-0xfbc7ffff pref]
    [ 0.188895] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
    [ 0.188903] pci 0000:01:00.1: reg 10: [mem 0xfbcfc000-0xfbcfffff]
    [ 0.188969] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.189011] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
    [ 0.189014] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
    [ 0.189017] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.189048] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
    [ 0.189091] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.189094] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.189098] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.189144] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
    [ 0.189223] pci 0000:03:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
    [ 0.189236] pci 0000:03:00.0: reg 30: [mem 0xfbee0000-0xfbeeffff pref]
    [ 0.189263] pci 0000:03:00.0: PME# supported from D3hot
    [ 0.189268] pci 0000:03:00.0: PME# disabled
    [ 0.189293] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
    [ 0.189315] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
    [ 0.189327] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
    [ 0.189339] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
    [ 0.189351] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
    [ 0.189363] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
    [ 0.189426] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.189491] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.189533] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.189536] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.189540] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.189589] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
    [ 0.189609] pci 0000:02:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
    [ 0.189620] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
    [ 0.189658] pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
    [ 0.189693] pci 0000:02:00.0: supports D1 D2
    [ 0.189694] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.189698] pci 0000:02:00.0: PME# disabled
    [ 0.193338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.193385] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.193390] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.193397] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.193434] pci 0000:05:02.0: [1033:0035] type 0 class 0x000c03
    [ 0.193452] pci 0000:05:02.0: reg 10: [mem 0xfbffd000-0xfbffdfff]
    [ 0.193514] pci 0000:05:02.0: supports D1 D2
    [ 0.193516] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot
    [ 0.193519] pci 0000:05:02.0: PME# disabled
    [ 0.193533] pci 0000:05:02.1: [1033:0035] type 0 class 0x000c03
    [ 0.193546] pci 0000:05:02.1: reg 10: [mem 0xfbffe000-0xfbffefff]
    [ 0.193601] pci 0000:05:02.1: supports D1 D2
    [ 0.193602] pci 0000:05:02.1: PME# supported from D0 D1 D2 D3hot
    [ 0.193605] pci 0000:05:02.1: PME# disabled
    [ 0.193619] pci 0000:05:02.2: [1033:00e0] type 0 class 0x000c03
    [ 0.193633] pci 0000:05:02.2: reg 10: [mem 0xfbfffc00-0xfbfffcff]
    [ 0.193687] pci 0000:05:02.2: supports D1 D2
    [ 0.193689] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
    [ 0.193692] pci 0000:05:02.2: PME# disabled
    [ 0.193711] pci 0000:05:03.0: [104c:8023] type 0 class 0x000c00
    [ 0.193726] pci 0000:05:03.0: reg 10: [mem 0xfbfff000-0xfbfff7ff]
    [ 0.193735] pci 0000:05:03.0: reg 14: [mem 0xfbff8000-0xfbffbfff]
    [ 0.193786] pci 0000:05:03.0: supports D1 D2
    [ 0.193787] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
    [ 0.193791] pci 0000:05:03.0: PME# disabled
    [ 0.193806] pci 0000:05:04.0: [11ab:4320] type 0 class 0x000200
    [ 0.193823] pci 0000:05:04.0: reg 10: [mem 0xfbff4000-0xfbff7fff]
    [ 0.193831] pci 0000:05:04.0: reg 14: [io 0xe800-0xe8ff]
    [ 0.193867] pci 0000:05:04.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
    [ 0.193886] pci 0000:05:04.0: supports D1 D2
    [ 0.193888] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.193891] pci 0000:05:04.0: PME# disabled
    [ 0.193926] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
    [ 0.193971] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.193974] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
    [ 0.193978] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.193980] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.193982] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.193983] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.193985] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.193987] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    [ 0.194003] pci_bus 0000:00: on NUMA node 0
    [ 0.194005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.194127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.194156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.194243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [ 0.194277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    [ 0.194313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    [ 0.194355] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.199969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.200342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.200724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.201105] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    [ 0.201486] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.201868] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    [ 0.202249] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [ 0.202634] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.203051] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.203107] vgaarb: loaded
    [ 0.203206] PCI: Using ACPI for IRQ routing
    [ 0.203247] PCI: pci_cache_line_size set to 64 bytes
    [ 0.203358] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
    [ 0.203360] reserve RAM buffer: 000000007ff90000 - 000000007fffffff
    [ 0.203439] NetLabel: Initializing
    [ 0.203478] NetLabel: domain hash size = 128
    [ 0.203518] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.203565] NetLabel: unlabeled traffic allowed by default
    [ 0.203608] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.203653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.203797] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.210012] Switching to clocksource hpet
    [ 0.211034] pnp: PnP ACPI init
    [ 0.211084] ACPI: bus type pnp registered
    [ 0.211173] pnp 00:00: [bus 00-ff]
    [ 0.211175] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.211177] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.211179] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.211180] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.211182] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.211184] pnp 00:00: [mem 0x80000000-0xffffffff window]
    [ 0.211222] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.211229] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [ 0.211267] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.211311] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.211335] pnp 00:02: [dma 4]
    [ 0.211337] pnp 00:02: [io 0x0000-0x000f]
    [ 0.211338] pnp 00:02: [io 0x0081-0x0083]
    [ 0.211339] pnp 00:02: [io 0x0087]
    [ 0.211341] pnp 00:02: [io 0x0089-0x008b]
    [ 0.211342] pnp 00:02: [io 0x008f]
    [ 0.211343] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.211367] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.211374] pnp 00:03: [io 0x0070-0x0071]
    [ 0.211380] pnp 00:03: [irq 8]
    [ 0.211403] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.211412] pnp 00:04: [io 0x0061]
    [ 0.211435] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.211441] pnp 00:05: [io 0x00f0-0x00ff]
    [ 0.211444] pnp 00:05: [irq 13]
    [ 0.211469] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.211669] pnp 00:06: [irq 4]
    [ 0.211671] pnp 00:06: [dma 0 disabled]
    [ 0.211672] pnp 00:06: [io 0x03f8-0x03ff]
    [ 0.211721] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.211835] pnp 00:07: [io 0x0000-0xffffffff disabled]
    [ 0.211837] pnp 00:07: [io 0x0000-0xffffffff disabled]
    [ 0.211838] pnp 00:07: [io 0x0290-0x0297]
    [ 0.211879] system 00:07: [io 0x0290-0x0297] has been reserved
    [ 0.211922] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.211997] pnp 00:08: [io 0x0010-0x001f]
    [ 0.211999] pnp 00:08: [io 0x0022-0x003f]
    [ 0.212000] pnp 00:08: [io 0x0044-0x005f]
    [ 0.212002] pnp 00:08: [io 0x0062-0x0063]
    [ 0.212003] pnp 00:08: [io 0x0065-0x006f]
    [ 0.212004] pnp 00:08: [io 0x0072-0x007f]
    [ 0.212006] pnp 00:08: [io 0x0080]
    [ 0.212007] pnp 00:08: [io 0x0084-0x0086]
    [ 0.212008] pnp 00:08: [io 0x0088]
    [ 0.212010] pnp 00:08: [io 0x008c-0x008e]
    [ 0.212011] pnp 00:08: [io 0x0090-0x009f]
    [ 0.212012] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.212014] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.212015] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.212016] pnp 00:08: [io 0x0800-0x087f]
    [ 0.212018] pnp 00:08: [io 0x0400-0x03ff disabled]
    [ 0.212019] pnp 00:08: [io 0x0480-0x04bf]
    [ 0.212021] pnp 00:08: [mem 0xffafe000-0xffb0cbff]
    [ 0.212022] pnp 00:08: [mem 0xffb00000-0xffbfffff]
    [ 0.212024] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
    [ 0.212025] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
    [ 0.212026] pnp 00:08: [mem 0xfff00000-0xfffffffe]
    [ 0.212028] pnp 00:08: [mem 0xfebfe000-0xfebfec00]
    [ 0.212089] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.212132] system 00:08: [io 0x0800-0x087f] has been reserved
    [ 0.212174] system 00:08: [io 0x0480-0x04bf] has been reserved
    [ 0.212216] system 00:08: [mem 0xffafe000-0xffb0cbff] could not be reserved
    [ 0.212259] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
    [ 0.212302] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.212345] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.212388] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
    [ 0.212430] system 00:08: [mem 0xfebfe000-0xfebfec00] has been reserved
    [ 0.212473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.212521] pnp 00:09: [mem 0xfed00000-0xfed003ff]
    [ 0.212547] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.212580] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
    [ 0.212581] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
    [ 0.212625] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.212668] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.212712] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.212761] pnp 00:0b: [mem 0xe0000000-0xefffffff]
    [ 0.212801] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.212844] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.212967] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.212969] pnp 00:0c: [mem 0x000c0000-0x000cffff]
    [ 0.212971] pnp 00:0c: [mem 0x000e0000-0x000fffff]
    [ 0.212972] pnp 00:0c: [mem 0x00100000-0x7fffffff]
    [ 0.212974] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
    [ 0.213025] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.213068] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.213111] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.213154] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
    [ 0.213198] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.213198] Switched to NOHz mode on CPU #0
    [ 0.213237] Switched to NOHz mode on CPU #1
    [ 0.213286] pnp: PnP ACPI: found 13 devices
    [ 0.213326] ACPI: ACPI bus type pnp unregistered
    [ 0.249481] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
    [ 0.249526] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.249579] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
    [ 0.249632] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.249675] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80800000-0x808000ff]
    [ 0.249720] pci 0000:00:1f.3: BAR 0: set to [mem 0x80800000-0x808000ff] (PCI address [0x80800000-0x808000ff])
    [ 0.249775] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.249816] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
    [ 0.249859] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
    [ 0.249902] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.249956] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
    [ 0.250011] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.250055] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
    [ 0.250099] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.250154] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.250195] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.250239] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.250283] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.250338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.250380] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.250424] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.250468] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref]
    [ 0.250523] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
    [ 0.250565] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.250609] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
    [ 0.250653] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.250702] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.250746] pci 0000:00:01.0: setting latency timer to 64
    [ 0.250750] pci 0000:00:1c.0: enabling device (0106 -> 0107)
    [ 0.250792] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.250836] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.250840] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.250884] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.250890] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.250933] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.250938] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.250941] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.250943] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.250944] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.250946] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.250948] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.250949] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
    [ 0.250951] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbcfffff]
    [ 0.250953] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.250955] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
    [ 0.250956] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
    [ 0.250958] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.250960] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.250961] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
    [ 0.250963] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.250965] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 0.250966] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
    [ 0.250968] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
    [ 0.250970] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
    [ 0.250972] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
    [ 0.250973] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.250975] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.250977] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.250978] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.250980] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.251002] NET: Registered protocol family 2
    [ 0.251085] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.251263] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.251592] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.251779] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.251822] TCP reno registered
    [ 0.251861] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.251907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.252025] NET: Registered protocol family 1
    [ 0.295104] pci 0000:01:00.0: Boot video device
    [ 0.295141] PCI: CLS 32 bytes, default 64
    [ 0.295174] Unpacking initramfs...
    [ 0.317387] Freeing initrd memory: 1728k freed
    [ 0.318002] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [ 0.318046] apm: disabled - APM is not SMP safe.
    [ 0.318193] audit: initializing netlink socket (disabled)
    [ 0.318243] type=2000 audit(1303935493.316:1): initialized
    [ 0.318520] highmem bounce pool size: 64 pages
    [ 0.318562] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.320047] VFS: Disk quotas dquot_6.5.2
    [ 0.320145] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.320261] msgmni has been set to 1709
    [ 0.320435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.320488] io scheduler noop registered
    [ 0.320527] io scheduler deadline registered
    [ 0.320574] io scheduler cfq registered (default)
    [ 0.320710] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.320734] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.320771] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.320798] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.320848] pcieport 0000:00:1c.4: setting latency timer to 64
    [ 0.320875] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
    [ 0.320923] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.320950] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
    [ 0.321092] intel_idle: MWAIT substates: 0x22220
    [ 0.321094] intel_idle: does not run on family 6 model 23
    [ 0.321105] ERST: Table is not found!
    [ 0.321155] isapnp: Scanning for PnP cards...
    [ 0.676796] isapnp: No Plug & Play device found
    [ 0.676877] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.697390] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.920667] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.973728] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.976563] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.976631] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.976752] mousedev: PS/2 mouse device common for all mice
    [ 0.976847] rtc_cmos 00:03: RTC can wake from S4
    [ 1.000070] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 1.000137] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.000200] cpuidle: using governor ladder
    [ 1.000240] cpuidle: using governor menu
    [ 1.000436] TCP cubic registered
    [ 1.000476] NET: Registered protocol family 17
    [ 1.000521] Registering the dns_resolver key type
    [ 1.000569] Using IPI No-Shortcut mode
    [ 1.000679] PM: Hibernation image not present or could not be loaded.
    [ 1.000682] registered taskstats version 1
    [ 1.001054] rtc_cmos 00:03: setting system clock to 2011-04-27 20:18:14 UTC (1303935494)
    [ 1.001128] Initalizing network drop monitor service
    [ 1.001211] Freeing unused kernel memory: 424k freed
    [ 1.005982] <30>udev[38]: starting version 167
    [ 1.107427] SCSI subsystem initialized
    [ 1.127245] libata version 3.00 loaded.
    [ 1.131006] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
    [ 1.131057] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.131134] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [ 1.131436] scsi0 : pata_jmicron
    [ 1.131554] scsi1 : pata_jmicron
    [ 1.132024] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
    [ 1.132068] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
    [ 1.142526] ahci 0000:00:1f.2: version 3.0
    [ 1.142536] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.142608] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.142644] ahci: SSS flag set, parallel bus scan disabled
    [ 1.142711] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [ 1.142765] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
    [ 1.142819] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.174032] scsi2 : ahci
    [ 1.174136] scsi3 : ahci
    [ 1.174235] scsi4 : ahci
    [ 1.174335] scsi5 : ahci
    [ 1.174434] scsi6 : ahci
    [ 1.174532] scsi7 : ahci
    [ 1.174699] ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 44
    [ 1.174752] ata4: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 44
    [ 1.174804] ata5: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff200 irq 44
    [ 1.174856] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff280 irq 44
    [ 1.174908] ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff300 irq 44
    [ 1.174960] ata8: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 44
    [ 1.175036] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level,

    Hi jasonwryan,
    Your thread helps a lot. I saw a lot of posts but not this one.
    This workaround is fine for me to wait the fix.
    Thanks a lot
    Workaround :
    It seems the problem might be linked to transparent items like background.
    As explained in the above thread :
    According to the bug report the nVidia driver is freaking out and creating too many events, which causes an event buffer in Xorg to overflow.  It works OK with the older Xorg, though.
    So the temporary solution is to downgrade 3 packages.
    Install the tool to downgrade
    > yaourt -Sy downgrade
    Downgrade
    Note the item number can change
    > downgrade xf86-input-evdev
    Hit "s" key
    Choose 2 (xf86-input-evdev-2.6.0-2-i686.pkg.tar.xz)
    > downgrade xorg-server
    Hit "s" key
    Choose 1 (xorg-server-1.9.4.901-1-i686.pkg.tar.xz)
    > downgrade xorg-server-common
    Hit "s" key
    Choose 1 (xorg-server-common-1.9.4.901-1-i686.pkg.tar.xz)
    Be carefull : don't update these 3 packages when updating your system (pacman -Syu) since it is not fixed.
    Last edited by shefla (2011-04-27 22:36:37)

  • X starts then locks up with nvidia drivers

    I've just done a fresh install of arch 64 which boots to cli and runs fine.
    I installed the xorg group and nvidia package, copied over my xorg.conf file from my arch 32 bit setup and started X. I get twm with 3 windows and a clock but the machine locks up and needs a hard reset.
    I also tried installing the official nvidia driver package but that caused the same problems and also gave me errors about libGL.so being corrupt so took that off and went back to the arch package.
    dbus, acpid and hal are all loaded and running.
    I have two 8600GT video cards which are working fine with the same config file in both debian and recently in arch 32 bit.
    The Xorg.0.log file is empty so I've not much to go on.
    What can I do to debug this further?

    i had same preoblem earlier today and im on intel drivers (64bit). worked like a charm yesterday then today when logging into X keyboard and mouse froze, with no help from any logs, althou i run without xorg.conf. tried alot of things and suddenly it worked. sorry i dont know what exactly made it work but thing i looked up was: .xinitrc, rc.conf (removed @ from hal,dbus etc), inittab (had som stupid autostart X that was dodgy, got me into wrong WM), my windowmanager start file, started from both /usr/bin/xinit and startx and then suddenly.. it took me over one hour thou.

  • Can't get display to work with nvidia drivers...

    hi everyone,
    on my new system i can't get my nvidia geforce 6600 to work with the proprietary drivers.
    i went through a new xorg.conf hassle to get a working display. vesa driver was suggested, it worked but slowly. nv driver works somewhat slowly as well.
    using nvidia driver 8774, screen goes blank, my monitor fells asleep, and i don't have a clue about what's going on. i cannot switch to a text-based console (ctrl+alt+F2), all i can do i ctrl+alt+backspace to restart (?) X server, and after a few second, my system seems to reboot by itself.
    any advice is appreciated. thanks !
    xorg.conf
    Section "ServerLayout"
    Identifier "Original Layout"
    Screen "Default Screen" 0 0
    InputDevice "Mouse" "CorePointer"
    InputDevice "Keyboard" "CoreKeyboard"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    # Load "dri"
    # Load "extmod"
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    # Load "speedo"
    EndSection
    Section "InputDevice"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Identifier "Keyboard"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"
    Option "AutoRepeat" "500 30"
    EndSection
    Section "InputDevice"
    Identifier "Mouse"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/input/mouse0"
    Option "Buttons" "7"
    Option "ZAxisMapping" "4 5"
    Option "Resolution" "800"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Identifier "Card0"
    Driver "nv"
    VendorName "All"
    BoardName "All"
    EndSection
    #Section "Device"
    # Insert Clocks lines here if appropriate
    # ChipSet "GeForce2 MX/MX 400"
    # Card "nv GeForce2 MX/MX 400"
    # Identifier "card0"
    # Driver "nvidia"
    # Option "Coolbits" "1"
    # Option "CursorShadow" "true"
    # Option "NoLogo" "1"
    # Option "NvAGP" "1"
    # Option "AllowGLXWithComposite" "true"
    # Option "RenderAccel" "true"
    # Option "backingstore" "true"
    # Option "UseEdidFreqs" "false"
    #EndSection
    Section "Screen"
    Identifier "Default Screen"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
    Depth 1
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    #Section "DRI"
    # Mode 0666
    #EndSection
    #Section "Extensions"
    # Option "Composite" "Enable"
    # Option "RENDER" "Enable"
    #EndSection
    Xorg.0.log
    X Window System Version 7.1.1
    Release Date: 12 May 2006
    X Protocol Version 11, Revision 0, Release 7.1.1
    Build Operating System: UNKNOWN
    Current Operating System: Linux hal 2.6.18-ARCH #1 SMP PREEMPT Mon Oct 16 10:36:48 CEST 2006 i686
    Build Date: 19 September 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 19 15:59:00 2006
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Original Layout"
    (**) |-->Screen "Default Screen" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse"
    (**) |-->Input Device "Keyboard"
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) XKB: rules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) XKB: model: "pc105"
    (**) Option "XkbLayout" "fr"
    (**) XKB: layout: "fr"
    (==) Keyboard: CustomKeycode disabled
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Option "AllowMouseOpenFail" "true"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.0
    X.Org XInput driver : 0.6
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
    (II) Module bitmap: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules/libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
    (II) PCI: 00:00:1: chip 10de,01eb card 10de,0c17 rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:2: chip 10de,01ee card 10de,0c17 rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:3: chip 10de,01ed card 10de,0c17 rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:4: chip 10de,01ec card 10de,0c17 rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:5: chip 10de,01ef card 10de,0c17 rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
    (II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
    (II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
    (II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
    (II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
    (II) PCI: 00:05:0: chip 10de,006b card 1043,0c11 rev a2 class 04,01,00 hdr 00
    (II) PCI: 00:06:0: chip 10de,006a card 1043,8095 rev a1 class 04,01,00 hdr 00
    (II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
    (II) PCI: 00:0c:0: chip 10de,006d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0d:0: chip 10de,006e card 1043,809a rev a3 class 0c,00,10 hdr 00
    (II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
    (II) PCI: 01:07:0: chip 1102,0002 card 1102,8026 rev 07 class 04,01,00 hdr 80
    (II) PCI: 01:07:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
    (II) PCI: 01:09:0: chip 109e,036e card 0070,13eb rev 11 class 04,00,00 hdr 80
    (II) PCI: 01:09:1: chip 109e,0878 card 0070,13eb rev 11 class 04,80,00 hdr 80
    (II) PCI: 01:0a:0: chip 10ec,8139 card 4554,434e rev 10 class 02,00,00 hdr 00
    (II) PCI: 01:0b:0: chip 1095,3112 card 1095,6112 rev 02 class 01,04,00 hdr 00
    (II) PCI: 02:01:0: chip 10b7,9201 card 1043,80ab rev 40 class 02,00,00 hdr 00
    (II) PCI: 03:00:0: chip 10de,00f2 card 0000,0000 rev a2 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000a000 - 0x0000bfff (0x2000) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:12:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xd5000000 - 0xd6ffffff (0x2000000) MX[b]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0x50000000 - 0x500fffff (0x100000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 3 non-prefetchable memory range:
    [0] -1 0 0xd7000000 - 0xd9ffffff (0x3000000) MX[b]
    (II) Bus 3 prefetchable memory range:
    [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b]
    (--) PCI: (1:9:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xd4000000/12
    (--) PCI:*(3:0:0) nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] rev 162, Mem @ 0xd7000000/24, 0xc0000000/28, 0xd8000000/24
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) PCI Memory resource overlap reduced 0xd0000000 from 0xd3ffffff to 0xcfffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xd6000000 - 0xd600007f (0x80) MX[b]
    [1] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[b]
    [2] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[b]
    [3] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[b]
    [4] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[b]
    [5] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[b]
    [6] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[b]
    [7] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[b]
    [8] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[b]
    [9] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[b]
    [10] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[b]
    [11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
    [12] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[b](B)
    [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
    [15] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b](B)
    [16] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[b]
    [17] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[b]
    [18] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[b]
    [19] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
    [20] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[b]
    [21] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
    [22] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
    [23] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[b]
    [24] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
    [25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [26] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[b]
    [27] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [28] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
    [29] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xd6000000 - 0xd600007f (0x80) MX[b]
    [1] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[b]
    [2] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[b]
    [3] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[b]
    [4] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[b]
    [5] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[b]
    [6] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[b]
    [7] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[b]
    [8] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[b]
    [9] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[b]
    [10] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[b]
    [11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
    [12] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[b](B)
    [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
    [15] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b](B)
    [16] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[b]
    [17] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[b]
    [18] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[b]
    [19] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
    [20] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[b]
    [21] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
    [22] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
    [23] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[b]
    [24] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
    [25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [26] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[b]
    [27] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [28] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
    [29] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd6000000 - 0xd600007f (0x80) MX[b]
    [5] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[b]
    [6] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[b]
    [7] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[b]
    [8] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[b]
    [9] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[b]
    [10] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[b]
    [11] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[b]
    [12] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[b]
    [13] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[b]
    [14] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[b]
    [15] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
    [16] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[b](B)
    [17] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [18] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
    [19] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b](B)
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [22] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[b]
    [23] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[b]
    [24] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[b]
    [25] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
    [26] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[b]
    [27] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
    [28] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
    [29] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[b]
    [30] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
    [31] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [32] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[b]
    [33] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [34] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
    [35] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
    (II) LoadModule: "ddc"
    (II) Loading /usr/lib/xorg/modules/libddc.so
    (II) Module ddc: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.0
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.8774
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "bitmap"
    (II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
    (II) Loading font Bitmap
    (II) LoadModule: "type1"
    (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Type1
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.1.1, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.8774
    Module class: X.Org Video Driver
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
    (II) LoadModule: "keyboard"
    (II) Loading /usr/lib/xorg/modules/input/keyboard_drv.so
    (II) Module keyboard: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
    (II) NVIDIA dlloader X Driver 1.0-8774 Tue Aug 1 20:55:35 PDT 2006
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 03:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset NVIDIA GPU found
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/lib/xorg/modules/libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd6000000 - 0xd600007f (0x80) MX[b]
    [5] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[b]
    [6] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[b]
    [7] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[b]
    [8] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[b]
    [9] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[b]
    [10] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[b]
    [11] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[b]
    [12] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[b]
    [13] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[b]
    [14] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[b]
    [15] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
    [16] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[b](B)
    [17] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [18] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
    [19] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b](B)
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [22] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[b]
    [23] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[b]
    [24] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[b]
    [25] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
    [26] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[b]
    [27] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
    [28] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
    [29] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[b]
    [30] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
    [31] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [32] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[b]
    [33] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [34] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
    [35] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd6000000 - 0xd600007f (0x80) MX[b]
    [5] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[b]
    [6] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[b]
    [7] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[b]
    [8] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[b]
    [9] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[b]
    [10] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[b]
    [11] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[b]
    [12] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[b]
    [13] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[b]
    [14] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[b]
    [15] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
    [16] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[b](B)
    [17] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [18] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
    [19] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b](B)
    [20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [25] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[b]
    [26] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[b]
    [27] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[b]
    [28] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
    [29] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[b]
    [30] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
    [31] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
    [32] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[b]
    [33] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
    [34] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [35] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[b]
    [36] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [37] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
    [38] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
    [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
    (==) NVIDIA(0): RGB weight 565
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): NVIDIA GPU GeForce Go 6600 GT at PCI:3:0:0
    (--) NVIDIA(0): VideoRAM: 262144 kBytes
    (--) NVIDIA(0): VideoBIOS: 05.43.02.61.00
    (II) NVIDIA(0): Detected PCI Express Link width: 16X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce Go 6600 GT at
    (--) NVIDIA(0): PCI:3:0:0:
    (--) NVIDIA(0): Iiyama AS4314UT (CRT-0)
    (--) NVIDIA(0): Iiyama AS4314UT (CRT-0): 400.0 MHz maximum pixel clock
    (II) NVIDIA(0): Assigned Display Device: CRT-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1280x1024"
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): "800x600"
    (II) NVIDIA(0): "640x480"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config option
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[b]
    [1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b]
    [2] 0 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b]
    [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [7] -1 0 0xd6000000 - 0xd600007f (0x80) MX[b]
    [8] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[b]
    [9] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[b]
    [10] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[b]
    [11] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[b]
    [12] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[b]
    [13] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[b]
    [14] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[b]
    [15] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[b]
    [16] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[b]
    [17] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[b]
    [18] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
    [19] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[b](B)
    [20] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
    [21] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
    [22] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b](B)
    [23] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [24] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [25] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [27] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [28] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[b]
    [29] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[b]
    [30] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[b]
    [31] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
    [32] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[b]
    [33] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[b]
    [34] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
    [35] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[b]
    [36] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
    [37] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [38] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[b]
    [39] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [40] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[b]
    [41] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
    [42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [43] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x00000000, 0x00000508, 0)
    (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x00000000, 0x00000508, 0)
    (II) NVIDIA(0): Setting mode "1280x1024"
    (WW) NVIDIA(0): WAIT (2, 1, 0x8000, 0x00000000, 0x000005a8, 0)
    (WW) NVIDIA(0): WAIT (1, 1, 0x8000, 0x00000000, 0x000005a8, 0)
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (**) Option "dpms" "true"
    (**) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (WW) NVIDIA(0): WAIT (2, 3, 0x8000, 0x00000000, 0x00000aec, 0)
    (WW) NVIDIA(0): WAIT (1, 3, 0x8000, 0x00000000, 0x00000aec, 0)
    (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x00000000, 0x00000b1c, 0)
    (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x00000000, 0x00000b1c, 0)
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Initializing extension GLX
    (**) Option "Protocol" "ExplorerPS/2"
    (**) Mouse: Device: "/dev/input/mouse0"
    (**) Mouse: Protocol: "ExplorerPS/2"
    (**) Option "CorePointer"
    (**) Mouse: Core Pointer
    (**) Option "Device" "/dev/input/mouse0"
    (**) Option "Buttons" "7"
    (==) Mouse: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) Mouse: ZAxisMapping: buttons 4 and 5
    (**) Mouse: Buttons: 11
    (**) Option "Resolution" "800"
    (**) Mouse: Resolution: 800
    (**) Option "CoreKeyboard"
    (**) Keyboard: Core Keyboard
    (**) Option "Protocol" "standard"
    (**) Keyboard: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard: XkbModel: "pc105"
    (**) Option "XkbLayout" "fr"
    (**) Keyboard: XkbLayout: "fr"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
    (II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
    (II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
    (II) Mouse: ps2EnableDataReporting: succeeded
    (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x00000000, 0x00000ba4, 0)

    here's my latest attempt, thanks to chrismortimore :
    xorg.conf
    Section "ServerLayout"
    Identifier "Simple Layout"
    Screen "Default Screen" 0 0
    InputDevice "Mouse" "CorePointer"
    InputDevice "Keyboard" "CoreKeyboard"
    EndSection
    Section "Files"
    # FontPath "/usr/share/fonts/corefonts"
    # FontPath "/usr/share/fonts/CID"
    # FontPath "/usr/share/fonts/Speedo"
    # FontPath "/usr/share/fonts/TrueType/"
    # FontPath "/usr/share/fonts/freefont/"
    # ModulePath "/usr/X11R6/lib/modules"
    # RgbPath "/usr/share/X11/rgb"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi"
    # FontPath "/usr/share/fonts/local"
    EndSection
    Section "Module"
    # Load "dri"
    # SubSection "extmod"
    # Option "omit xfree86-dga" # don't initialise the DGA extension
    # EndSubSection
    Load "type1"
    # Load "speedo"
    Load "freetype"
    # Load "xtt"
    Load "glx"
    # Load "v4l"
    Load "bitmap"
    Load "dbe"
    Load "ddc"
    Load "extmod"
    Load "int10"
    Load "record"
    Load "vbe"
    EndSection
    Section "InputDevice"
    # Option "XkbVariant" "nodeadkeys"
    Option "XkbRules" "xorg"
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Identifier "Keyboard"
    Driver "kbd"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"
    Option "AutoRepeat" "500 30"
    EndSection
    Section "InputDevice"
    Identifier "Mouse"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    # Option "Emulate3Buttons" "true"
    Option "Buttons" "7"
    Option "ZAxisMapping" "4 5"
    Option "ButtonMapping" "1 2 3 6 7"
    Option "Resolution" "800"
    Option "Corepointer"
    EndSection
    Section "Monitor"
    Identifier "Monitor"
    HorizSync 30.0 - 130.0
    VertRefresh 50.0 - 160.0
    # Option "DPMS"
    EndSection
    #Section "Device"
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    # Identifier "Standard VGA"
    # Driver "vga"
    # VendorName "Unknown"
    # BoardName "Unknown"
    #EndSection
    Section "Device"
    # Insert Clocks lines here if appropriate
    # ChipSet "GeForce2 MX/MX 400"
    # Card "nv GeForce2 MX/MX 400"
    Identifier "NVIDIA GeForce 6600"
    Driver "nvidia"
    # Option "Coolbits" "1"
    # Option "CursorShadow" "true"
    # Option "NoLogo" "1"
    # Option "NvAGP" "1"
    # Option "AllowGLXWithComposite" "true"
    # Option "RenderAccel" "true"
    # Option "backingstore" "true"
    # Option "UseEdidFreqs" "false"
    EndSection
    Section "Screen"
    Identifier "Default Screen"
    Device "NVIDIA GeForce 6600"
    Monitor "Monitor"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "true"
    # Option "RENDER" "Enable"
    EndSection
    here's the resulting Xorg.0.log
    X Window System Version 7.1.1
    Release Date: 12 May 2006
    X Protocol Version 11, Revision 0, Release 7.1.1
    Build Operating System: UNKNOWN
    Current Operating System: Linux hal 2.6.18-ARCH #1 SMP PREEMPT Sat Oct 21 13:20:13 CEST 2006 i686
    Build Date: 19 September 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 26 13:40:28 2006
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Default Screen" (0)
    (**) | |-->Monitor "Monitor"
    (**) | |-->Device "NVIDIA GeForce 6600"
    (**) |-->Input Device "Mouse"
    (**) |-->Input Device "Keyboard"
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.0
    X.Org XInput driver : 0.6
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
    (II) Module bitmap: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules/libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.0
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
    (II) PCI: 00:00:1: chip 10de,01eb card 10de,0c17 rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:2: chip 10de,01ee card 10de,0c17 rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:3: chip 10de,01ed card 10de,0c17 rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:4: chip 10de,01ec card 10de,0c17 rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:00:5: chip 10de,01ef card 10de,0c17 rev c1 class 05,00,00 hdr 80
    (II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
    (II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
    (II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
    (II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
    (II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
    (II) PCI: 00:05:0: chip 10de,006b card 1043,0c11 rev a2 class 04,01,00 hdr 00
    (II) PCI: 00:06:0: chip 10de,006a card 1043,8095 rev a1 class 04,01,00 hdr 00
    (II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
    (II) PCI: 00:0c:0: chip 10de,006d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0d:0: chip 10de,006e card 1043,809a rev a3 class 0c,00,10 hdr 00
    (II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
    (II) PCI: 01:09:0: chip 109e,036e card 0070,13eb rev 11 class 04,00,00 hdr 80
    (II) PCI: 01:09:1: chip 109e,0878 card 0070,13eb rev 11 class 04,80,00 hdr 80
    (II) PCI: 01:0a:0: chip 10ec,8139 card 4554,434e rev 10 class 02,00,00 hdr 00
    (II) PCI: 01:0b:0: chip 1095,3112 card 1095,6112 rev 02 class 01,04,00 hdr 00
    (II) PCI: 02:01:0: chip 10b7,9201 card 1043,80ab rev 40 class 02,00,00 hdr 00
    (II) PCI: 03:00:0: chip 10de,00f2 card 0000,0000 rev a2 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000a000 - 0x0000bfff (0x2000) IX[B]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[B]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:12:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xd5000000 - 0xd6ffffff (0x2000000) MX[B]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0x50000000 - 0x500fffff (0x100000) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 3 non-prefetchable memory range:
    [0] -1 0 0xd7000000 - 0xd9ffffff (0x3000000) MX[B]
    (II) Bus 3 prefetchable memory range:
    [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
    (--) PCI: (1:9:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xd4000000/12
    (--) PCI:*(3:0:0) nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] rev 162, Mem @ 0xd7000000/24, 0xc0000000/28, 0xd8000000/24
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xd0000000 from 0xd3ffffff to 0xcfffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xd6000000 - 0xd600007f (0x80) MX[B]
    [1] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[B]
    [2] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[B]
    [3] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
    [4] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[B]
    [5] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[B]
    [6] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[B]
    [7] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[B]
    [8] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[B]
    [9] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[B]
    [10] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[B]
    [11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
    [12] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
    [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    [14] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[B](B)
    [15] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
    [16] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[B]
    [17] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
    [18] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
    [19] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
    [20] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
    [21] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
    [22] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
    [23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
    [24] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
    [25] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [26] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [27] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xd6000000 - 0xd600007f (0x80) MX[B]
    [1] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[B]
    [2] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[B]
    [3] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
    [4] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[B]
    [5] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[B]
    [6] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[B]
    [7] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[B]
    [8] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[B]
    [9] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[B]
    [10] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[B]
    [11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
    [12] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
    [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    [14] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[B](B)
    [15] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
    [16] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[B]
    [17] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
    [18] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
    [19] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
    [20] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
    [21] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
    [22] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
    [23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
    [24] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
    [25] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [26] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [27] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xd6000000 - 0xd600007f (0x80) MX[B]
    [5] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[B]
    [6] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[B]
    [7] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
    [8] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[B]
    [9] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[B]
    [10] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[B]
    [11] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[B]
    [12] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[B]
    [13] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[B]
    [14] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[B]
    [15] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
    [16] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
    [17] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    [18] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[B](B)
    [19] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [22] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[B]
    [23] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
    [24] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
    [25] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
    [26] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
    [27] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
    [28] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
    [29] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
    [30] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
    [31] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [32] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
    (II) LoadModule: "type1"
    (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Type1
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.1.1, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.8776
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "bitmap"
    (II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
    (II) Loading font Bitmap
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "ddc"
    (II) Loading /usr/lib/xorg/modules/libddc.so
    (II) Module ddc: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.0
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.0
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules/libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.1.0
    ABI class: X.Org Video Driver, version 1.0
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.8776
    Module class: X.Org Video Driver
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
    (II) NVIDIA dlloader X Driver 1.0-8776 Mon Oct 16 21:57:32 PDT 2006
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 03:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset NVIDIA GPU found
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/lib/xorg/modules/libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xd6000000 - 0xd600007f (0x80) MX[B]
    [5] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[B]
    [6] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[B]
    [7] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
    [8] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[B]
    [9] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[B]
    [10] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[B]
    [11] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[B]
    [12] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[B]
    [13] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[B]
    [14] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[B]
    [15] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
    [16] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
    [17] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    [18] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[B](B)
    [19] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [22] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[B]
    [23] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
    [24] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
    [25] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
    [26] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
    [27] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
    [28] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
    [29] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
    [30] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
    [31] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [32] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xd6000000 - 0xd600007f (0x80) MX[B]
    [5] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[B]
    [6] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[B]
    [7] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
    [8] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[B]
    [9] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[B]
    [10] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[B]
    [11] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[B]
    [12] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[B]
    [13] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[B]
    [14] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[B]
    [15] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
    [16] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
    [17] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    [18] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[B](B)
    [19] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
    [20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
    [21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
    [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [25] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[B]
    [26] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
    [27] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
    [28] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
    [29] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
    [30] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
    [31] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
    [32] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
    [33] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
    [34] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [35] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [36] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
    [37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
    [38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce Go 6600 GT at PCI:3:0:0
    (--) NVIDIA(0): VideoRAM: 262144 kBytes
    (--) NVIDIA(0): VideoBIOS: 05.43.02.61.00
    (II) NVIDIA(0): Detected PCI Express Link width: 16X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce Go 6600 GT at
    (--) NVIDIA(0): PCI:3:0:0:
    (--) NVIDIA(0): Iiyama (CRT-0)
    (--) NVIDIA(0): Iiyama (CRT-0): 400.0 MHz maximum pixel clock
    (II) NVIDIA(0): Assigned Display Device: CRT-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1600x1200"
    (II) NVIDIA(0): "1280x1024"
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): "800x600"
    (II) NVIDIA(0): "640x480"
    (II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
    (WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute
    (WW) NVIDIA(0): DPI from EDID.
    (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[B]
    [1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
    [2] 0 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[B]
    [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [7] -1 0 0xd6000000 - 0xd600007f (0x80) MX[B]
    [8] -1 0 0xdb000000 - 0xdb0001ff (0x200) MX[B]
    [9] -1 0 0xdb001000 - 0xdb0010ff (0x100) MX[B]
    [10] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
    [11] -1 0 0xdc085000 - 0xdc08503f (0x40) MX[B]
    [12] -1 0 0xdc084000 - 0xdc0847ff (0x800) MX[B]
    [13] -1 0 0xdc087000 - 0xdc087fff (0x1000) MX[B]
    [14] -1 0 0xdc000000 - 0xdc07ffff (0x80000) MX[B]
    [15] -1 0 0xdc083000 - 0xdc083fff (0x1000) MX[B]
    [16] -1 0 0xdc081000 - 0xdc081fff (0x1000) MX[B]
    [17] -1 0 0xdc086000 - 0xdc086fff (0x1000) MX[B]
    [18] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
    [19] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
    [20] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    [21] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[B](B)
    [22] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
    [23] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    [24] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    [25] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [27] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [28] -1 0 0x0000c000 - 0x0000c07f (0x80) IX[B]
    [29] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
    [30] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
    [31] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
    [32] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
    [33] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
    [34] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
    [35] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
    [36] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
    [37] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [38] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [39] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
    [40] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [41] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x00000000, 0x00000508, 0)
    (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x00000000, 0x00000508, 0)
    (II) NVIDIA(0): Setting mode "1600x1200"
    (WW) NVIDIA(0): WAIT (2, 1, 0x8000, 0x00000000, 0x000005a8, 0)
    (WW) NVIDIA(0): WAIT (1, 1, 0x8000, 0x00000000, 0x000005a8, 0)
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) Loading extension NV-CONTROL
    (WW) NVIDIA(0): WAIT (2, 3, 0x8000, 0x00000000, 0x00000aec, 0)
    (WW) NVIDIA(0): WAIT (1, 3, 0x8000, 0x00000000, 0x00000aec, 0)
    (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x00000000, 0x00000b1c, 0)
    (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x00000000, 0x00000b1c, 0)
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Initializing extension GLX
    (**) Option "Protocol" "ExplorerPS/2"
    (**) Mouse: Device: "/dev/input/mice"
    (**) Mouse: Protocol: "ExplorerPS/2"
    (**) Option "SendCoreEvents" "true"
    (**) Mouse: always reports core events
    (**) Option "CorePointer"
    (**) Mouse: Core Pointer
    (**) Option "Device" "/dev/input/mice"
    (**) Option "Buttons" "7"
    (==) Mouse: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) Mouse: ZAxisMapping: buttons 4 and 5
    (**) Option "ButtonMapping" "1 2 3 6 7"
    (**) Mouse: Buttons: 11
    (**) Option "Resolution" "800"
    (**) Mouse: Resolution: 800
    (**) Option "CoreKeyboard"
    (**) Keyboard: Core Keyboard
    (**) Option "Protocol" "standard"
    (**) Keyboard: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard: XkbModel: "pc105"
    (**) Option "XkbLayout" "fr"
    (**) Keyboard: XkbLayout: "fr"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
    (II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
    (II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
    (II) Mouse: ps2EnableDataReporting: succeeded
    there seems to be troubles with acpi and edid frequencies. i tried to uncomment the UseEdidFreqs line, with no luck.
    i don't have any idea about what to try next...

  • [Solved] 1366x768 Resolution with nVidia drivers

    I am trying to set up my monitor at full resolution (1366x768) and I am having issues getting it to display correctly. Out of the box, I was able to get 1024x768, but when I tried to manually set the full resolution using xrandr, it will only go up to 1280x768 with a black bar on the right. Below are the relevant files;
    xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 325.15 (buildmeister@swio-display-x64-rhel04-07) Wed Jul 31 19:31:53 PDT 2013
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: builtin, VertRefresh source: builtin
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "CRT-1"
    HorizSync 28.0 - 55.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "CRT-1"
    Option "metamodes" "nvidia-auto-select +0+0"
    Option "SLI" "Off"
    Option "MultiGPU" "Off"
    Option "BaseMosaic" "off"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Xorg.log.0
    [ 10.475]
    X.Org X Server 1.14.3
    Release Date: 2013-09-12
    [ 10.475] X Protocol Version 11, Revision 0
    [ 10.475] Build Operating System: Linux 3.11.1-1-ARCH i686
    [ 10.475] Current Operating System: Linux steinbeck 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:40:32 CEST 2013 i686
    [ 10.475] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=646d074d-3ed6-4e3c-982e-43395ef95493 rw quiet
    [ 10.475] Build Date: 08 October 2013 08:51:37PM
    [ 10.475]
    [ 10.475] Current version of pixman: 0.30.2
    [ 10.475] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 10.475] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 10.475] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 9 19:41:27 2013
    [ 10.534] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 10.574] (==) No Layout section. Using the first Screen section.
    [ 10.574] (==) No screen section available. Using defaults.
    [ 10.574] (**) |-->Screen "Default Screen Section" (0)
    [ 10.574] (**) | |-->Monitor "<default monitor>"
    [ 10.594] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 10.594] (==) Automatically adding devices
    [ 10.594] (==) Automatically enabling devices
    [ 10.594] (==) Automatically adding GPU devices
    [ 10.656] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 10.656] Entry deleted from font path.
    [ 10.656] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 10.656] Entry deleted from font path.
    [ 10.672] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 10.672] Entry deleted from font path.
    [ 10.672] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 10.675] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 10.675] Entry deleted from font path.
    [ 10.675] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 10.675] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 10.675] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 10.675] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 10.676] (II) Loader magic: 0x8259620
    [ 10.676] (II) Module ABI versions:
    [ 10.676] X.Org ANSI C Emulation: 0.4
    [ 10.676] X.Org Video Driver: 14.1
    [ 10.676] X.Org XInput driver : 19.1
    [ 10.676] X.Org Server Extension : 7.0
    [ 10.676] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 10.678] (--) PCI:*(0:1:0:0) 10de:0622:3842:c866 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 10.678] Initializing built-in extension Generic Event Extension
    [ 10.678] Initializing built-in extension SHAPE
    [ 10.678] Initializing built-in extension MIT-SHM
    [ 10.678] Initializing built-in extension XInputExtension
    [ 10.678] Initializing built-in extension XTEST
    [ 10.678] Initializing built-in extension BIG-REQUESTS
    [ 10.678] Initializing built-in extension SYNC
    [ 10.678] Initializing built-in extension XKEYBOARD
    [ 10.678] Initializing built-in extension XC-MISC
    [ 10.678] Initializing built-in extension SECURITY
    [ 10.678] Initializing built-in extension XINERAMA
    [ 10.678] Initializing built-in extension XFIXES
    [ 10.678] Initializing built-in extension RENDER
    [ 10.678] Initializing built-in extension RANDR
    [ 10.678] Initializing built-in extension COMPOSITE
    [ 10.678] Initializing built-in extension DAMAGE
    [ 10.678] Initializing built-in extension MIT-SCREEN-SAVER
    [ 10.678] Initializing built-in extension DOUBLE-BUFFER
    [ 10.678] Initializing built-in extension RECORD
    [ 10.678] Initializing built-in extension DPMS
    [ 10.678] Initializing built-in extension X-Resource
    [ 10.678] Initializing built-in extension XVideo
    [ 10.678] Initializing built-in extension XVideo-MotionCompensation
    [ 10.678] Initializing built-in extension XFree86-VidModeExtension
    [ 10.678] Initializing built-in extension XFree86-DGA
    [ 10.678] Initializing built-in extension XFree86-DRI
    [ 10.678] Initializing built-in extension DRI2
    [ 10.678] (II) LoadModule: "glx"
    [ 10.722] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 11.897] (II) Module glx: vendor="NVIDIA Corporation"
    [ 11.897] compiled for 4.0.2, module version = 1.0.0
    [ 11.897] Module class: X.Org Server Extension
    [ 11.897] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:38:58 PDT 2013
    [ 11.897] Loading extension GLX
    [ 11.897] (==) Matched nouveau as autoconfigured driver 0
    [ 11.897] (==) Matched nvidia as autoconfigured driver 1
    [ 11.897] (==) Matched nv as autoconfigured driver 2
    [ 11.897] (==) Matched nouveau as autoconfigured driver 3
    [ 11.897] (==) Matched nvidia as autoconfigured driver 4
    [ 11.897] (==) Matched nv as autoconfigured driver 5
    [ 11.897] (==) Matched vesa as autoconfigured driver 6
    [ 11.897] (==) Matched modesetting as autoconfigured driver 7
    [ 11.897] (==) Matched fbdev as autoconfigured driver 8
    [ 11.897] (==) Assigned the driver to the xf86ConfigLayout
    [ 11.897] (II) LoadModule: "nouveau"
    [ 11.904] (WW) Warning, couldn't open module nouveau
    [ 11.904] (II) UnloadModule: "nouveau"
    [ 11.904] (II) Unloading nouveau
    [ 11.904] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 11.904] (II) LoadModule: "nvidia"
    [ 11.904] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 11.953] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 11.953] compiled for 4.0.2, module version = 1.0.0
    [ 11.953] Module class: X.Org Video Driver
    [ 11.954] (II) LoadModule: "nv"
    [ 11.954] (WW) Warning, couldn't open module nv
    [ 11.954] (II) UnloadModule: "nv"
    [ 11.954] (II) Unloading nv
    [ 11.954] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 11.954] (II) LoadModule: "vesa"
    [ 11.955] (WW) Warning, couldn't open module vesa
    [ 11.955] (II) UnloadModule: "vesa"
    [ 11.955] (II) Unloading vesa
    [ 11.955] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 11.955] (II) LoadModule: "modesetting"
    [ 11.955] (WW) Warning, couldn't open module modesetting
    [ 11.955] (II) UnloadModule: "modesetting"
    [ 11.955] (II) Unloading modesetting
    [ 11.955] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 11.955] (II) LoadModule: "fbdev"
    [ 11.955] (WW) Warning, couldn't open module fbdev
    [ 11.955] (II) UnloadModule: "fbdev"
    [ 11.955] (II) Unloading fbdev
    [ 11.955] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 11.957] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 18:17:17 PDT 2013
    [ 11.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 11.957] (++) using VT number 1
    [ 11.961] (II) Loading sub module "fb"
    [ 11.961] (II) LoadModule: "fb"
    [ 11.961] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 11.973] (II) Module fb: vendor="X.Org Foundation"
    [ 11.973] compiled for 1.14.3, module version = 1.0.0
    [ 11.973] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.973] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 11.973] (II) Loading sub module "wfb"
    [ 11.973] (II) LoadModule: "wfb"
    [ 11.973] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 11.976] (II) Module wfb: vendor="X.Org Foundation"
    [ 11.976] compiled for 1.14.3, module version = 1.0.0
    [ 11.976] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.976] (II) Loading sub module "shadow"
    [ 11.976] (II) LoadModule: "shadow"
    [ 11.976] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 11.977] (II) Module shadow: vendor="X.Org Foundation"
    [ 11.977] compiled for 1.14.3, module version = 1.1.0
    [ 11.977] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.977] (II) Loading sub module "ramdac"
    [ 11.977] (II) LoadModule: "ramdac"
    [ 11.977] (II) Module "ramdac" already built-in
    [ 11.985] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 11.985] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 11.985] (==) NVIDIA(0): RGB weight 888
    [ 11.985] (==) NVIDIA(0): Default visual is TrueColor
    [ 11.985] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 11.989] (**) NVIDIA(0): Enabling 2D acceleration
    [ 12.996] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 13.056] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 13.057] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
    [ 13.057] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 13.057] (--) NVIDIA(0): VideoBIOS: 62.94.61.00.60
    [ 13.057] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 13.059] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
    [ 13.059] (--) NVIDIA(0): CRT-0
    [ 13.059] (--) NVIDIA(0): CRT-1 (boot, connected)
    [ 13.059] (--) NVIDIA(0): TV-0
    [ 13.059] (--) NVIDIA(0): DFP-0
    [ 13.059] (--) NVIDIA(0): DFP-1
    [ 13.059] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 13.059] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [ 13.059] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
    [ 13.059] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
    [ 13.059] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
    [ 13.059] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
    [ 13.059] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    [ 13.059] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 13.059] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 13.059] (**) NVIDIA(0): all display devices.)
    [ 13.062] (==) NVIDIA(0):
    [ 13.062] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 13.062] (==) NVIDIA(0): will be used as the requested mode.
    [ 13.062] (==) NVIDIA(0):
    [ 13.062] (II) NVIDIA(0): Validated MetaModes:
    [ 13.062] (II) NVIDIA(0): "CRT-1:nvidia-auto-select{}"
    [ 13.062] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 13.090] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
    [ 13.090] (WW) NVIDIA(0): from CRT-1's EDID.
    [ 13.090] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 13.090] (--) Depth 24 pixmap format is 32 bpp
    [ 13.090] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 13.093] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 13.093] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 13.093] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 13.093] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 13.093] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 13.093] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 13.093] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 13.093] (II) NVIDIA(0): Config Options in the README.
    [ 13.096] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select{}"
    [ 13.155] Loading extension NV-GLX
    [ 13.189] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 13.189] (==) NVIDIA(0): Backing store disabled
    [ 13.189] (==) NVIDIA(0): Silken mouse enabled
    [ 13.190] (==) NVIDIA(0): DPMS enabled
    [ 13.191] Loading extension NV-CONTROL
    [ 13.191] Loading extension XINERAMA
    [ 13.191] (II) Loading sub module "dri2"
    [ 13.191] (II) LoadModule: "dri2"
    [ 13.191] (II) Module "dri2" already built-in
    [ 13.191] (II) NVIDIA(0): [DRI2] Setup complete
    [ 13.191] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 13.191] (--) RandR disabled
    [ 13.209] (II) Initializing extension GLX
    [ 13.417] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 13.417] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.417] (II) LoadModule: "evdev"
    [ 13.417] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 13.433] (II) Module evdev: vendor="X.Org Foundation"
    [ 13.433] compiled for 1.14.3, module version = 2.8.2
    [ 13.433] Module class: X.Org XInput Driver
    [ 13.433] ABI class: X.Org XInput driver, version 19.1
    [ 13.433] (II) Using input driver 'evdev' for 'Power Button'
    [ 13.433] (**) Power Button: always reports core events
    [ 13.433] (**) evdev: Power Button: Device: "/dev/input/event5"
    [ 13.433] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 13.433] (--) evdev: Power Button: Found keys
    [ 13.433] (II) evdev: Power Button: Configuring as keyboard
    [ 13.433] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
    [ 13.433] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 13.433] (**) Option "xkb_rules" "evdev"
    [ 13.434] (**) Option "xkb_model" "pc104"
    [ 13.434] (**) Option "xkb_layout" "us"
    [ 13.462] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 13.462] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.462] (II) Using input driver 'evdev' for 'Power Button'
    [ 13.462] (**) Power Button: always reports core events
    [ 13.462] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 13.462] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 13.462] (--) evdev: Power Button: Found keys
    [ 13.462] (II) evdev: Power Button: Configuring as keyboard
    [ 13.462] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 13.462] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 13.462] (**) Option "xkb_rules" "evdev"
    [ 13.462] (**) Option "xkb_model" "pc104"
    [ 13.462] (**) Option "xkb_layout" "us"
    [ 13.462] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 13.463] (II) config/udev: Adding input device Chicony Saitek Eclipse Keyboard (/dev/input/event0)
    [ 13.463] (**) Chicony Saitek Eclipse Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 13.463] (II) Using input driver 'evdev' for 'Chicony Saitek Eclipse Keyboard'
    [ 13.463] (**) Chicony Saitek Eclipse Keyboard: always reports core events
    [ 13.463] (**) evdev: Chicony Saitek Eclipse Keyboard: Device: "/dev/input/event0"
    [ 13.463] (--) evdev: Chicony Saitek Eclipse Keyboard: Vendor 0x6a3 Product 0x8020
    [ 13.463] (--) evdev: Chicony Saitek Eclipse Keyboard: Found keys
    [ 13.463] (II) evdev: Chicony Saitek Eclipse Keyboard: Configuring as keyboard
    [ 13.463] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/input/input0/event0"
    [ 13.463] (II) XINPUT: Adding extended input device "Chicony Saitek Eclipse Keyboard" (type: KEYBOARD, id 8)
    [ 13.463] (**) Option "xkb_rules" "evdev"
    [ 13.463] (**) Option "xkb_model" "pc104"
    [ 13.463] (**) Option "xkb_layout" "us"
    [ 13.464] (II) config/udev: Adding input device Chicony Saitek Eclipse Keyboard (/dev/input/event1)
    [ 13.464] (**) Chicony Saitek Eclipse Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 13.464] (II) Using input driver 'evdev' for 'Chicony Saitek Eclipse Keyboard'
    [ 13.464] (**) Chicony Saitek Eclipse Keyboard: always reports core events
    [ 13.464] (**) evdev: Chicony Saitek Eclipse Keyboard: Device: "/dev/input/event1"
    [ 13.464] (--) evdev: Chicony Saitek Eclipse Keyboard: Vendor 0x6a3 Product 0x8020
    [ 13.464] (--) evdev: Chicony Saitek Eclipse Keyboard: Found keys
    [ 13.464] (II) evdev: Chicony Saitek Eclipse Keyboard: Configuring as keyboard
    [ 13.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.1/input/input1/event1"
    [ 13.464] (II) XINPUT: Adding extended input device "Chicony Saitek Eclipse Keyboard" (type: KEYBOARD, id 9)
    [ 13.464] (**) Option "xkb_rules" "evdev"
    [ 13.464] (**) Option "xkb_model" "pc104"
    [ 13.464] (**) Option "xkb_layout" "us"
    [ 13.464] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 13.464] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 13.464] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 13.464] (**) Logitech USB Receiver: always reports core events
    [ 13.464] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
    [ 13.464] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 13.464] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 13.464] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 13.464] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 13.464] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 13.464] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 13.464] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 13.464] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 13.464] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 13.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input2/event2"
    [ 13.465] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
    [ 13.465] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 13.465] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 13.465] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 13.465] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 13.465] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 13.465] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 13.465] (II) No input driver specified, ignoring this device.
    [ 13.465] (II) This device may have been added with another device file.
    [ 13.465] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
    [ 13.465] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 13.465] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 13.465] (**) Logitech USB Receiver: always reports core events
    [ 13.465] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
    [ 13.465] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 13.466] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 13.466] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 13.466] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 13.466] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 13.466] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 13.466] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 13.466] (--) evdev: Logitech USB Receiver: Found keys
    [ 13.466] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 13.466] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 13.466] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 13.466] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 13.466] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 13.466] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/input/input3/event3"
    [ 13.466] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
    [ 13.466] (**) Option "xkb_rules" "evdev"
    [ 13.466] (**) Option "xkb_model" "pc104"
    [ 13.466] (**) Option "xkb_layout" "us"
    [ 13.466] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 13.466] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 13.466] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 13.466] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 13.466] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 13.466] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 13.466] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 13.466] (II) No input driver specified, ignoring this device.
    [ 13.466] (II) This device may have been added with another device file.
    [ 13.467] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10)
    [ 13.467] (II) No input driver specified, ignoring this device.
    [ 13.467] (II) This device may have been added with another device file.
    [ 13.467] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event11)
    [ 13.467] (II) No input driver specified, ignoring this device.
    [ 13.467] (II) This device may have been added with another device file.
    [ 13.467] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event12)
    [ 13.467] (II) No input driver specified, ignoring this device.
    [ 13.467] (II) This device may have been added with another device file.
    [ 13.467] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event13)
    [ 13.467] (II) No input driver specified, ignoring this device.
    [ 13.467] (II) This device may have been added with another device file.
    [ 13.468] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event14)
    [ 13.468] (II) No input driver specified, ignoring this device.
    [ 13.468] (II) This device may have been added with another device file.
    [ 13.468] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7)
    [ 13.468] (II) No input driver specified, ignoring this device.
    [ 13.468] (II) This device may have been added with another device file.
    [ 13.468] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event8)
    [ 13.468] (II) No input driver specified, ignoring this device.
    [ 13.468] (II) This device may have been added with another device file.
    [ 13.468] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
    [ 13.469] (II) No input driver specified, ignoring this device.
    [ 13.469] (II) This device may have been added with another device file.
    [ 13.469] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
    [ 13.469] (II) No input driver specified, ignoring this device.
    [ 13.469] (II) This device may have been added with another device file.
    [ 18.412] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 18.412] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 18.412] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 18.412] (**) NVIDIA(0): all display devices.)
    [ 23.193] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 23.193] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 23.193] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 23.193] (**) NVIDIA(0): all display devices.)
    [ 266.255] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 266.255] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 266.255] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 266.255] (**) NVIDIA(0): all display devices.)
    [ 266.971] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 266.971] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 266.971] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 266.971] (**) NVIDIA(0): all display devices.)
    [ 268.486] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 268.486] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 268.487] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 268.487] (**) NVIDIA(0): all display devices.)
    [ 289.743] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 289.743] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 289.743] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 289.743] (**) NVIDIA(0): all display devices.)
    [ 879.365] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 879.365] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 879.365] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 879.365] (**) NVIDIA(0): all display devices.)
    [ 74720.901] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 74720.901] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 74720.901] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 74720.901] (**) NVIDIA(0): all display devices.)
    [ 74734.644] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 74734.644] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 74734.644] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 74734.644] (**) NVIDIA(0): all display devices.)
    [ 74741.124] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 74741.124] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 74741.124] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 74741.124] (**) NVIDIA(0): all display devices.)
    [ 74741.272] (II) NVIDIA(0): Setting mode "DVI-I-1: 1368x768_60.00 @1368x768 +0+0 {ViewPortIn=1368x768, ViewPortOut=1368x768+0+0}"
    [ 74741.409] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 74741.409] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 74741.409] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 74741.409] (**) NVIDIA(0): all display devices.)
    Any suggestions?
    Last edited by fuzzyonethree (2013-10-13 23:14:48)

    Drop that xorg.conf completely, it doesn't contain any relevant settings. The problem is that the driver can't get the display's EDID:
    [ 13.090] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID
    Try a different cable. Or, if you can, use a digital connection (DVI, HDMI) instead of VGA.

  • Trouble with mac drivers installing correctly on windows xp on macbook

    i just got my new macbook and have figured out how to get boot camp and got a version of windows xp.
    everything successfully installed except what seems to be the most important part. when my mac osx driver cd comes to one of the last steps where it says its "registering" something. then the box comes up where it gives me the choice of the recomended STOP instalation or to continue the instalation. i chose cotinue instalation as intructed in the bootcamp set up guide and the same choice box appears again. after i choose to continue for the second time a fatal error message occurs and says that nothing really got installed.
    If anybody could help me out at all with this is would be greatly appreciated.
    thanks in advance for any and all advice!

    There is a discussion group for Boot Camp. Search in that group for answers, this has been covered before.
    Remember you are not only using beta software you are using it to install Windows.
    Before heading off in a great search in the Boot Camp discussions... Be absolutely certain that you have WinXP (Pro or Home) with Service Pack 2 (SP2) installed. While in WinXP right click on "My Computer" and select "Properties", it will tell you if this is true.
    Some folks have resorted to unpacking the driver file & installing each one at a time. The drivers can be unpacked using a command line switch. I don't remember the exact syntax - but a quick search in the Boot Camp discussion group should bring you the answer.
    Good luck! And remember... BACK UP your OSX data!
    Steve

  • X11 and Intel graphics – occasional freeze with recent drivers.

    Hi guys,
    Has anyone else experienced a noticeable freeze (lasting between a fraction of a second to several seconds) in X11 with xf86-video-intel on an up-to-date Arch install? This seems more noticeable on less-powerful hardware, particularly my Netbook!
    The multi-system emulator Retroarch really used to perform well (i.e. sustained smooth scrolling) under Arch, but now seems to lock up for a moment every 10-20 seconds. This only happens in full-screen mode with vsync enabled and it is NOT the emulator that is at fault. I have an older Arch install on a USB stick that works fine with the current build of Retroarch. Very strange indeed.
    I know there isn't a lot of information here in terms of package versions, but I wanted to put the feelers out before I start churning through older versions of xf86-video-intel and X11 packages to narrow down the point at which this started.

    This behaviour was introduced in xf86-video-intel-2.99.912-1. With the previous package - xf86-video-intel-2.99.911-2-x86_64.pkg.tar.xz - this did not occur.
    EDIT: could this be related? :
    http://www.phoronix.com/scan.php?page=n … px=MTc0Nzk
    Did v2.99.912 make the jump to DRI v3?
    Last edited by Modeler (2014-07-24 16:17:34)

  • [solved-ish]hardware / 3D acceleration problems with Nvidia drivers

    Hi,
    I am getting really slow response with 3d applications. I just tried glxgears and am not getting any more than 3 fps!!!!!!!!!!!!!!!
    Any ideas would be appreciated.
    xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder63) Fri Aug 14 17:55:55 PDT 2009
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "ServerFlags"
    Option "Xinerama" "0"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "NCI NEC CI A727"
    HorizSync 30.0 - 70.0
    VertRefresh 50.0 - 150.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "TV-0"
    HorizSync 28.0 - 55.0
    VertRefresh 43.0 - 72.0
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 6200"
    Option "RenderAccel" "True"
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 6200"
    BusID "PCI:1:0:0"
    Screen 1
    Option "RenderAccel" "True"
    EndSection
    Section "Screen"
    # Removed Option "metamodes" "1280x1024_60 +0+0"
    # Removed Option "metamodes" "CRT: 1280x1024_60 +0+0"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "CRT-0"
    Option "metamodes" "1280x1024_60 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    # Removed Option "metamodes" "TV: 720x480 +0+0"
    Identifier "Screen1"
    Device "Device1"
    Monitor "Monitor1"
    DefaultDepth 16
    Option "TwinView" "0"
    Option "metamodes" "TV: 720x480 +0+0; TV: 640x480 +0+0"
    SubSection "Display"
    Depth 16
    EndSubSection
    EndSection
    I thought this was originally a separate issue to nvidia, original post http://bbs.archlinux.org/viewtopic.php? … 47#p690547
    Last edited by ninjaprawn (2010-02-14 00:56:16)

    Vegita wrote:What I did with my install was (as root):
    Xorg -configure
    then     cp xorg.conf.new /etc/X11/xorg.conf
    and after this I used nvidia-xconfig utility! I did it the same way on many other distros even. And for the very last: try with one nvidia card only.
    followed this to a 't' as below;
    Xorg -configure
    cp xorg.conf.new /etc/X11/xorg.conf
    nvidia-xconfig
    and it produced the following xorg.conf;
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder75) Tue Dec 8 21:04:28 PST 2009
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dri2"
    Load "dbe"
    Load "extmod"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "NV44A [GeForce 6200]"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    which then  produced the following from glxgears;
    [user@ArchLinux ~]$ glxgears
    Running synchronized to the vertical refresh. The framerate should be
    approximately the same as the monitor refresh rate.
    17 frames in 5.2 seconds = 3.271 FPS
    16 frames in 5.1 seconds = 3.132 FPS
    9 frames in 5.2 seconds = 1.745 FPS
    8 frames in 5.1 seconds = 1.575 FPS
    9 frames in 5.5 seconds = 1.623 FPS
    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
    after 46 requests (45 known processed) with 0 events remaining.
    [user@ArchLinux ~]$

  • Sync freeze with SD card installed

    Hi,
    I find I am unable to sync media when an SD card is installed in my Bold 9900. When I attempt to sync music, the process freezes at 'Processing.' When I remove the SD card, the phone syncs as normal. Media card is enabled. What do I do to fix this?
    Thanks!

    As this is a peer support forum there is not much anyone here can do. If you tried two cards with the same issue I'd suggest either handing the phone in to a Nokia Care point or if available have it shipped to a Nokia Repair facility. I'd suggest you try the 'Contact us' link on the bottom of this page.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • [SOLVED] Problem with nvidia driver install/uninstall

    A while ago I installed the 177.70 driver from nvidia's site, then I was trying to install the 177.80 and to remove the .70 first, I tried
    sh NVIDIA-filename.177.70.run --uninstall
    And the installer told me no nvidia driver was found. I haven't been able to install a newer driver since every time I tried X would give me a driver mismatch error on start-up. I am hesitant to manually remove any files, how would I fully get rid of 177.70 so I can install a newer one??
    TIA
    Last edited by colbert (2008-12-05 02:58:10)

    See script for the command you should be running:
    sh NVIDIA-Linux-x86-180.11-pkg1.run -a -q -s -N --no-opengl-headers
    Assuming you're on 32-bit. To let Nvidia's installer sort out your mess.
    Last edited by brebs (2008-12-04 21:52:19)

  • Upgrading mesa with Catalyst drivers installed

    With the recent changed to the mesa drivers (the drivers have been combined into one package called "mesa-dri"), "mesa-dri" is now a dependency of the "mesa" package. This is a problem for me because I do not want the mesa drivers since I am using the Catalyst proprietary drivers. I cannot simply remove the "mesa" package either because it is a dependency for some other packages on my system that I need. I am using the Catalyst drivers from the unofficial repo. Here is the output when I try to upgrade:
    :: Synchronizing package databases...
    xorg112 is up to date
    catalyst-hd234k is up to date
    core is up to date
    extra is up to date
    community is up to date
    multilib is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    :: lib32-mesa-dri and lib32-catalyst-utils are in conflict (lib32-ati-dri). Remove lib32-catalyst-utils? [y/N]
    Is there a way to resolve this conflict while keeping both "lib32-mesa" and "lib32-catalyst-utils"?

    bboy716 wrote:I see from the wiki that the maintainer of the Catalyst unofficial repositories is Vi0L0. How do I go about contacting him about this issue?
    You can contact him directly at the website of the AUR package. I already did and I'm waiting for his answer (I'm using the catalyst-total-hd234k package).

Maybe you are looking for