Touchsmart IQ845uk Windows 7 Ultimate

After upgrading from Windows Vista to Windows 7 Ulitmate via a clean install, I can no lnger access the webcam. I've downloaded the software and installed it, but the p[rogram isn't showing anywhere. Can anyone help?
This question was solved.
View Solution.

Zareeba, welcome to the forum.
Is this the software that you installed? If not, try installing it. If so, reinstall it. It is an update for Win 7.
To test the webcam, you can always use Skype. It is easy to setup and use.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Problems with Fingerprint Reader on Touchsmart TX2-1274NR Notebook and Windows 7 Ultimate (64-bit)

I have just upgraded my tx2-1274nr to windows 7 ultimate (64-bit) [my university released the upgrade a week early] and I followed the directions provided by technical support and downloaded/installed all the updated drivers and software. Everything works great (actually better than great) except for two problems.
The fingerprint reader does not work. It shows up in the device manager, but when I try to register a fingerprint, Windows says no reader found.
This problem is not really effecting the performance, but it states on the device stage that I am missing a driver for the keyboard filters? I am not sure if this is important.
Any assistance would be greatly appreciated. I am really loving the new system, especially the multi-touch (installed the drivers from N-trig)!!
Thanks

Hi,
dclane wrote:
The fingerprint reader does not work. It shows up in the device manager, but when I try to register a fingerprint, Windows says no reader found.
Check this and this thread. You need Authentec TrueSuite.
dclane wrote:This problem is not really effecting the performance, but it states on the device stage that I am missing a driver for the keyboard filters? I am not sure if this is important.
If You have any version of Quick Lunch Buttos installed uninstall them and install this here which is provided by HP for Win7.
Message Edited by Daniel_Potyrala on 10-16-2009 12:35 AM
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

"Windows Explorer Has Stopped Working" Error Message Loop upon Startup of WIndows 7 Ultimate 64-bit

Ok I have a HP Touchsmart 6000 running Windows 7 Ultimate 64 bit OS. It is my 74 year old mothers computer and about 3 months ago it started acting up. First thing that happened was the internal DVD Burner started working intermitently, recognizing
her QuickBooks backup DVD files occasionally. I got her a new internal DVD burner and it worked for a while. during that time on Startup Help and Support would all of a sudden popup right away. Then recently Adobe Acrobat would
launch a PDF file about Flash and keep opening multiple instances of it. Now her new DVD doesnt work again and on startup at the windows desktop she gets an error "Windows Explorer has Stopped Working". No matter what I click the error
keeps looping. No program has been opened that causes it to crash because the error happens immediately and keeps repeating. I have tried to boot to Safe Mode, Safe Mode with Networking and have tried System Restore to no avail.
I have ran Malwarebytes Antivirus, Malwarebytes AntiExploit, AntiRootkit as well as Combofix. I have run the AntiMalware software from Microsoft and have updated all the drivers for the HP system. To no succcess.
At one point the system did load and an error came up JAN2OSD failed to start due to missing ACPI or something like that. For that brief moment Explorer stopped crashing. When I finished updating driverss though the error came back.
Please Help as she is about to cry and no one wants to make a 74 year old woman cry.:)
Thanks,
Jeff

Hi,
According to the steps you have performed, we have followed the steps mentioned in this KB article?
Error: Windows Explorer has stopped working
Hvae you tried the repair install of Windows 7? Follow the steps here:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
Besides, if issue insists, please follow the steps below to generate a dump file:
1. Create a new folder (named New folder)under C: drive.
2. Please save the below as a .reg file, and then import it to registry, reference here:
===
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\explorer.exe]
"DumpFolder"=hex(2):43,00,3a,00,5c,00,4e,00,65,00,77,00,20,00,66,00,6f,00,6c,\
00,64,00,65,00,72,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
===
3. After that , if Windows Explorer stops working again, please check the
C:\New folder for dump files and then upload them.
Meanwhile, please also make a contact with the manufacturer to see if we could get any further help from there.
Best regards
Michael Shao
TechNet Community Support

I have a touchsmart running windows 7 and i cannot get my screen saver to work

i have a touchsmart running windows 7 and i cannot get my screen saver to work

Hello. You need to change the energy use setting that computer uses max it out. Then it will work just fine. My is touchsmart 600-1050. The computer was preset to use minimum amount of electricity when in idle. I changed all the setting to high. Now every thing runs just like a Windows XP version computer. Thats how I got my screen savors to work. I also upgraded my Windows 7 to Windows 7 Ultimate now I am able to run a lot more XP software. Test your pond screen saver make sure that working with windows open. That will tell you if it is a software issue if it doesn't work. That is the case then restore it from your D: drive.

Windows vista Ultimate does not recognize ipod

Hello,
I have Windows Vista Ultimate and whe I plug my 30GB 5G Ipod it asks for the driver. It does not appear nor on explorer nor itunes.
I have itunes 7.1.5 installed.
i did try reseting the ipod but still the same problem.
I did try my Ipod on an XP computer and it works.
have anyone solved this compatibility problem or knows how to solve it?

perhaps try MarkTaylor46's technique from the following post:
http://discussions.apple.com/thread.jspa?threadID=892874&tstart=15

Windows Vista Ultimate and Error -42018

Hi there,
I upgraded to Windows Vista Ultimate about a month ago. I was trying to play music and download new content and the new content downloads would stop with -42018 - unexpected error.
I had to run the compatability wizard and allow Windows XP SP2 settings with administrator access to correct the issue.
I also lost most of my licensing when I upgraded. Hold off for I-Tunes to work with Vista if you are thinking about upgrading.
And on a side note, I think that the new Windows Media "Experience" in Vista is not all that great.

Hi there,
I upgraded to Windows Vista Ultimate about a month ago. I was trying to play music and download new content and the new content downloads would stop with -42018 - unexpected error.
I had to run the compatability wizard and allow Windows XP SP2 settings with administrator access to correct the issue.
I also lost most of my licensing when I upgraded. Hold off for I-Tunes to work with Vista if you are thinking about upgrading.
And on a side note, I think that the new Windows Media "Experience" in Vista is not all that great.

Live! Cam Voice - Microphone compatibility w/ Windows Vista Ultimate

I recently got the Live! Cam Voice for my computer with Windows Vista Ultimate. And for some reason the built in microphone won't work at all - even the voice recorder, the Yahoo! Messenger in which it was built for and Windows Live Messenger. However the actual webcam works fine. Is there anyway to get the microphone to be compatible with Ultimate?

HELLO CREATIVE!!!
CAN YOU MAKE THIS CAMERA USEFUL?
NEED NEW DRIVER!

Unable to uninstall sql server 2012 from Windows 7(ultimate) 64-bit SP1 version.

I am trying to install sql sever 2012 on my m/c but it's giving me error after partial installation.
Now I have successfully installed Sql Server 2008 R2 on my machine but when I am trying to uninstall 2012 sql server from my machine its giving an error regarding unsupported OS. However as mentioned earlier I have Windows 2007 Ultimate SP1 (64-bit) installed
on my machine which is included in valid platform for sql server 2012. Also I installed visual studio 2013 on my machine but it existed with error SqlServer\LocalDB not installed.

Hi pritamk,
According to your error message, as other post, you can uninstall SQL Server from command line, inaddition, another workaround is that change the compatibility mode of setup.exe to Vista SP2, then run “Remove” option from the control panel. You can refer
to the following steps.
Browse to your SQL setup bootstrap folder, For SQL Server 2012, this is the path "C:\Program Files \Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\".
Go to Setup.exe file and right click on Setup.exe. Then go to properties and click on "Compatibility" tab. Under "Compatibility mode", click on Run this program in compatibility mode for "Windows Vista (Service Pack 2)". Then Click on "Apply" then "OK".
After that go to control panel -> Programs and Features -> and remove SQL Server 2012
There is similar issue about uninstalling SQL Server 2012 RC0 from control panel. You can review the following post.
https://connect.microsoft.com/SQLServer/feedback/details/707706/unable-to-uninstall-sql-server-2012-rc0-from-control-panel
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Windows 7 Ultimate 64bit upgrade to Windows 8 Pro RTM 64bit hangs

I am trying to upgrade Windows 7 Ultimate 64bit on a Dell Alienware Aurora R3 desktop PC via DVD to Windows 8 Pro 64bit (RTM) and it freezes on the Windows Splash Screen after the installation and then after the restart. It looks like it has put the PC into
standby mode with the Windows logo frozen on one screen, however I cannot get PC out of 'sleep or hibernate mode' which is what it looks like it's done (flashing yellow Alienware logo).
When it happened the first time I had to manually shut it down and then restart it as the Win8 installation just stalled. After restart it said Windows 8 installation has failed and it successfully rolled back to my instance of Windows 7. I've
tried it again and it's done the same thing.
This is very frustrating as I did a clean install of Windows 8 Pro 64bit (RTM) on my Sony Vaio VGN-Z46GD laptop with no problems.
I have an Alienware Aurora R3 (only 8 months old):
Intel Core i7-2600K
8GB RAM
1.5GB Nvidia GeoForce GTX580

Just thought the Win 8 upgrade would be easy so long after launch but I am getting all of the above! I have done the following:-
Disable options: XD-Bit Capability, Intel SpeedStep Technology and Intel
C-state Tech.
http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=dhs&docid=586909
Override the current Intel chipset, it appears to be the issue, and run this older one (Intel Chipset Software Installation Utility, v.9.2.0.1015, A00) for now:
http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/alienware-aurora-r3?driverId=R284186&osCode=W764&fileId=2731115303
also install this: Renesas Integrated USB 3.0, v.2.0.4.0, A00
http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/alienware-aurora-r3?driverId=R286402&osCode=W764&fileId=2731116122
Still it won't reboot/come out of sleep - is there no answer from Dell/Microsoft to get this working?
Peter
Regards, Peter

Windows 7 Ultimate x64 BOOT Failure on HP ProBook 450 G1...

Dear forum viewes and experts...
I hope you can provide me with your insights on this problem i am having...
I bought a new laptop HP ProBook 450 G1 (i5 4200M, 8GB RAM, 1TB HDD, 2GB ATI Graphics card). The laptop comes with DOS free operating system.
I installed Windows 7 Ultimate from ISO file on a USB stick, and then activated the Windows.
After updating all drivers and having a clean device manager with no hardware left as unknown, i figured out that the laptop fails to make a cold BOOT.
After several trials, and installations. the problem remained the same. I changed the installation to Windows 8.1 Pro and the problem remained the same.
On cold booting, the laptop after showing HP logo in start-up starts to show Windows Logo animation but in Super Slow Motion for about 6-8 minutes, then followed by strange sounds which force me to shut it down by pressing power button for long until it shuts down.
After huge number of trail and error, i found out that if I entered BIOS Setup (by pressing esc then F10) and then exiting it without doing any changes or even without saving, the Laptop boots Windows 7 very smoothly (in about 15-18 seconds) and works fine. it also can make endless number of smooth restarts without any problem.
If it is shut down then turned on, the boot failure is the outcome.
The only way to make a successful cold BOOT (i.e after a shut down) is to enter BIOS setup mode (by pressing esc then F10), then exiting it within seconds without changing anything or saving, then it boots smoothly.
I tried MBR fixes through command prompt in Recovery Mode, I tried to change booting to make it boot as LEGACY or UEFI Hybrid. The BIOS is updated to the latest frimware on HP website verion 1.2 dated 15 July 2014.
NO HELP.....All lead to the same disappointing result.
Any idea whether this is a hardware issue/software issue/BIOS issue?
Your insights will be highly appreciated

Hello,
I'd ask in the
Windows 7 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) USB controller not working

I am having problems with my HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) Intially Windows 8 was installed but I got windows 7ultimate for it and now I'm missing the drivers for it.
I don't know how to fix this problem, I have tried everything. I downloaded an program called DeviceDocter and it downloaded the thing but then an error saying. Your system does not meet the miniumum requirements for this update. Update has been cancelled. (9996). It says AMD USB Controller Driver. It should work on my computer since it's Windows 7 Ultimate x64. Please help me fix my ports. Just my 2 ports on my left side of the computer isn't working. The right side of the computer port is working.

Thanks for the help, but I found the program to fix it. After searching for hours. I stumbled upon this link and it finally worked and the unknown device was only my headset and the other one I just updated by making it search online for the software. Here is the link for other people to use to fix their usb port problems. - http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?javax.portlet.begCac...

Windows 7 Ultimate x64 Drivers not working

When I installed Windows 7 Ultimate N x64 on Boot Camp, it worked fine, I could get into the Windows Partition no problem. When I try to install the Boot Camp drivers for Windows, it says that it can't run the program or that it is incompatible with my version of Windows. I can't connect to the internet or use the trackpad. Any help? It was a subscription version of Windows 7 Ultimate from MSDN.

How did you obtain the BC drivers? Please post the year/model of your Mac.

Hp probook 4530s drivers for windows 7 ultimate 32bit

I am running Windows 7 Professional 64bit on my hp probook 4530s notebook, and I am going to upgrade to Windows 7 Ultimate 32bit. but I will need the drivers for the new windows, because i will have to format the laptop to change from 64 bit to 32 bit.
So where can i download all the drivers.
kind regards
Jean Meintjes

Hi, Jean:
Below is the link to the support and driver page for your notebook:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5060882&lang=en&cc=us...
Just use the W7 Pro 32 bit drivers for your W7 Ultimate installation.
They will work just fine.
Best regards,
Paul

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

MSI 785GM-E51 - Amount of usable RAM in Windows 7 Ultimate 64bit

Hello i have the following system:
Mobo: MSI 785GM-E51
Bios: AMI v 2.3
CPU: AMD Phenom II 955 BE @ 3.2Ghz
Memory: 2 dimms of ( KINGSTON KVR1333D3N9/2G DDR3 2GB PC10666 1333MHZ VALUE RAM ) , Total 4Gb
GPU: Sapphire Radeon X1950 Pro with 256mb RAM
OS: Windows 7 Ultimate 64bit
The specific motherboard has an onboard ATI 4200 vga. I've installed the Radeon x1950 pro from day 1 and in the bios settings the onboard vga option reads disabled. However windows 7 during install always recognize both x1950 pro an 4200 and provide drivers. In windows device manager i have the 4200 disabled. However windows display that from the 4GB of installed ram only 3,75GB is usable. Is this normal? Isn't supposed to have all my memory available since the onboard vga is disabled? And if it is disabled from start how windows 7 detect it during installation and suggest corresponding drivers ? I'm looking forward for your opinions and suggestions
Thanks in advance...

Turn memory >4GB remapping on, see your manual how to do it.
And stop bumping your message, it's NOT allowed.
>>Please read and comply with the Forum Rules.<<

Touchsmart IQ845uk Windows 7 Ultimate

Similar Messages

Maybe you are looking for