Touchup-Objektwerkzeug - Probleme mit Illustrator CS4

Hoffe das mir jemand rasch bei meinem Problem mit dem Acroabt 9 Touchup-Objektwerkzeug und Illustrator CS4 helfen kann.
Ich habe seit heute das Phänomen, das wenn ich bei einem PDF etwas mit dem TouchUp-Objektwerkzeug anwähle und im Illustrator bearbeiten möchte, ich nach dem schliessen und speichern im Illustrator, im PDF das ausgewählte Objekt versetzt angezeigt wird und alle aus Illustrator anwählbaren Marken (Schnittmarken, Passermarken usw.) mit angezeigt und plaziert werde.

Das habe ich befürchtet.
Danke für den Tipp.
Hoffentlich finde ich heute Abend Zeit dafür ;-)
Liebe Grüße
Anand

Similar Messages

Problem Mit Illustrator

Hallo,
ich habe ein kleines aber unschönes Problem mit Illustrator. Ich möchte mir Illustrator eine Broschüre erstellen, klappt auch alles gut, und ist auch so weit fertig. Nun habe ich auf der startseite ein Hintergrundbild, oben und unten eine Welle und über der Welle ein Bild.
Das bild, welches über die welle geht, habe ich vorher freigestellt. Nun habe ich aber an der stelle, wo das bild über die welle geht, eine weiße Stelle.
Diese stelle sieht man nicht in der aus ID erstellten PDF Datei, nur wenn man diese PDF auf einen Drucker schickt oder lokal als PDF ausdruckt. Wenn man sie auf den Drucker schickt auch nur dann, wenn man alle seiten druckt. Wenn man nur die erste Seite druckt, sieht man diese Stelle nicht.
Das ganze macht mich irgendwie Wahnsinng.
Die AI datei ist folgendermaßen augebaut:
Weiße Hintergrund welle und darüber eine grüne welle + eine "schmale" grüne welle mit einer Transparenz von 30%
Ich hoffe ihr könnt mir helfen.
Anbei die Stelle, die ich meine. Man kann gut sehen, dass das bild in dem Grünen bereich einfach weiß wird. In dem weißen bereich (zwischen den beiden grünen) sieht man sogar noch was von dem bild. Für mich macht das ganze keinen sinn.
Gruß
DasPabst

Okay, ich versuche mal alles zu beantworten
Habe die welle in Illustrator und die Broschüre in Indesign gebaut.
Das grün hat den Farbwert CMYK - 31 - 3 - 31 - 0
Überdruckenvorschau ? .. wo finde ich die ...
Die PDF ist als PDF/X-4:2008 Erstellt.
Adobe Illustrator und Indesign
Indesign Version 7.0 CS5 ... Illustrator kann ich gerade nicht sagen ...
Windows 7 x64
Kann es dadurck komme, dass ich in Illustrator transparenz verwendet habe ? sollte ich es mal mit farbton 30% anstatt transparenz 30% versuchen? habe leider Illustrator gerade nicht hier, kann es also nicht testen ...

Problem reinstalling Illustrator CS4 on Mac Intel

I had Illustrator CS4 installed in my Mac Mini Intel OS 10.6.8 and it worked fine, but I had to reinstall it and now I cannot print from Illustrator, it freezes Illustrator.
I already uninstalled using the Uninstaller and reinstalled it three times and the same problem remains.
If I open the Illustrator file in Photoshop CS4 I can print with no problem.
Any help is welcome .
Thanks

Illustrator acesses different parts of the .ppd so possibly could be part of the problem. Look at your print settings, try bitmapping everything, by sliding raster balance to rasters. Will say custom after you click ok, not medium resolution. Then check the Graphics tab above advanced and what postcritpt level you have set.
Is your iMac that works using the same exact .ppd?

Snap to Grid problem in Illustrator CS4

I found a weird problem with the "snap to grid" feature in Illustrator CS4 running on MAC OS X Snow Leopard.
To reproduce it, on my system, it is enough to:
1. Make sure to have the Snap To Grid enabled (View->Snap to grid)
2. Draw a rectangle (see BEGIN.JPG)
3. Select the Direct Selection Tool
4. Try to increase the width of the rectangle, by dragging one side of the shape (not a single point, but the whole side in a move).
5. On my system, I see that Illustrator behaves in a wrong way; it is like Illustrator is snapping to a not aligned grid, and the rectangle begins to be distorted (see END.JPG).
If I try to move a on point at a time, instead of moving one complete side, everything seems to works fine.

Win Vista 64-bit AI CS4. Can't seem to reproduce your issue. I drag on the right side of a rectangle with grid snap on and show grid and it snaps exactly to the grid, not anywhere in between even if I start with a rectangle that was created "not-on-grid". When it snaps it snaps to distances equal to the grid spacing, though it won't snap to the grid itself. It's as if it snaps to its own internal grid. I guess that's a problem in and of itself since once you have grid snapping turned on no matter where the original rectangle was you would like it to snap to the grid lines.
EDIT: Now I see how you created the problem--with direct selection (white arrow) as opposed to full selection with bounding box (black arrow). Black arrow selection snaps to its internal grid while white arrow snaps to rhombus-like snapping. I guess it's designed to be used with individual points and not with edges. (AI doesn't have edge-snapping).

Problem installing Illustrator CS4

Please help -- I'm trying to reinstall my Illustrator CS4 after changing computers...and it won't allow me to install.

You need to provide proper system info. nobody can help you without it.
Mylenium

Problemer med illustrator cs4 i windows xp / skift til windows 7, 64 bit

What could be the reason for illustrator cs4 change artboards size, and change the type on a path will also be changed
It happened after I changed the computer from Windows XP to Windows 7, 64-bit
mvh. Mr. Mox

Monica
I hawe the originale document and its ok, and when it's reopened in the reinstalled version, The content of the artborad which was made first and that is ok. Floats beyond artboards in the document when it is loaded again in the newly installed illustrator. There will not be made other than opening the document. It looks strange when it is the same version and everything seems to be the same.
Mox

Probleme mit Photoshop CS4 und Softproof

Es geht um eine nicht korrekte Darstellung des Softproofs:
Hab da mal nen Test gestartet:
Ein Bild welches kein Profil hat in PSD CS4 geöffnet. Beim öffnen dem ersten Bild ein sRGB Profil zugewiesen. Der Kopie des Bildes ein AdobeRGB Profil zugewiesen. (nicht konvertiert, nur rein zugewiesen)
Dann bei dem Bild mit AdobeRGB einen Softproof angelegt welcher sRGB simulieren soll. (Nummern beibehalten)
Tataaa, das Ergebnis stimmt NICHT mit dem ersten Bild überein welches in sRGB geöffnet wurde. Hier das Bild:
Als Beweis:
Das komplett selbe Szenario in Photoshop CS3 gemacht.
Hier stimmt der Softproof (rechts) mit dem linken Bild (wo das sRGB zugewiesen wurde) überein. So solls ja auch sein.
Nun, ich bin auch schon auf den "Fehler" draufgekommen, jedoch macht mich das ganze stutzig. Und zwar gibt es in der CS4 ja die neuen OpenGL Einstellungen.
Wenn man hier die Einstellung (Für Bildanzeige verwenden) abhakt, funktioniert das ganze wieder wie unter CS3.
Ich frage mich allerdings, warum dem so ist?
Inkompatibilitäten mit meiner Grafikkarte (GeForce GT 8800)?
Bug in Photoshop?
Ich find das ehrlich gesagt nicht i.O.
Denn wenn ich den Test nicht mache, werde ich beim softproofen ja eigentlich jedesmal auf eine falsche Fährte gelockt...
Kann jemand weiterhelfen?
lg
Gerry

Das sind irgendwelche Fehler im Wacom-Treiber in Kombination mit bestimmten Grafikkarten und PS' Hardwarebeschleunigung. Eine wirkliche Lösung zu dem Problem habe ich noch nirgendwo gesehen, aber vielelicht hilft ja das Ausknipsen von OpenCL oder andere Grafikeinstellungen im System.
Mylenium

Brush Problems with Illustrator CS4... the line does not draw with my mouse movement

When I use any other brush besides the Calligraphic Brushes from the "Artistic Ink" brush library, I press down with either my Wacom Tablet or mouse, and the line does not appear to draw. Then I release the button on the mouse or lift my pen tablet up, the lines appears. Sometimes, a little "dot dot dot" line appears when the brush stroke it going to appear. But most of the time, it's just nothing, and then the line appears after I've drawn it.
However, with the preselected brushed at the top, and the Calligraphic Artistic Brushes, the line appears as I am drawing it. This is what I want for the other brushes.
Is this normal?! I just recently upgraded to Windows 7, and reinstalled the Adobe Suite. I can't remember if Illustrator did this before I reinstalled it, but I'm not sure it did otherwise it would have annoyed me as much as it does now. Can anybody help me?

Hi!
Hope I'm not hijacking this thread.
First time posting to a forum.
I'm having the same problem and followed the advice for changing the file name in the Illustrator CS# Settings folder.
This solved the problem of seeing predicted brush paths for very basic brushs, but I still can't get a preview path for any of the ink brushs.
I've seen video tutorials which demonstrate inking techniques and the ink brush predicted path was clearly working in those tutorials.
I'm assuming therefore that I should be able to see some type of preview when using the ink brushs.
Any advice would be great!
Cheers!

Problems with illustrator CS4 and win 7 64 bit pencil and bruch tools

I just bought a computer with Windows 7 64 bit version. Whenever I use the Pencil tool and the brush tool, I can't see my lines as I draw them, only after I draw. Also sometimes the first item I draw disappears, and lines will sometimes be randomly broken, with pieces missing.
Is anyone else experiencing this? And have you found a way to get around it?
I tried changing the compatability mode for the program to work for Windows XP, but that hasn't helped.

I tried changing the compatability mode for the program to work for Windows XP, but that hasn't helped.
Nor should it. Issues such as you describe them are usually graphics driver issues or problems with specific input devices such as tablets which compatibility modes can't fix, as they use the same drivers. So what is it you are using on that end?
Mylenium

Problems Installing Adobe Illustrator CS4 on Mac OS X Yosemite

Hi all,
When trying to install Illustrator CS4 on Mac OS X Yosemite, I receive an error: "required resources are missing."
Previously, I had problems using Illustrator CS4 when I upgraded to Yosemite, due to an error with the plugin "photoshopimport.aip." I had attempted to uninstall Illustrator, but the uninstall also gave me errors. I ultimately used the CC Cleaner Tool to remove Illustrator.
Now, however, I can't reinstall Illustrator CS4 either! I use the version provided on Adobe's website, so it's not a problem with a physical DVD.
Any ideas for potential solutions? Many thanks!

I don't have an Adobe installation log, and it's not hidden either. I tried installing Illustrator CS4 again, and I noticed that the install fails while ~80% through an "initializing" step. So, it fails before it even starts to generate an install log! I re-downloaded it and had the same error.
I did notice that I have some errors in the Adobe CC Cleaner Tool when I was removing Illustrator CS4. If you look at my first post, I couldn't use it, or uninstall it, so I simply used the Cleaner Tool to remove it. There are some errors in the Cleaner Tool log, such as this one:
2014-11-02 15:11:19.319 Adobe Creative Cloud Cleaner Tool[1573:8801317] The following session will be removed: bf2f18d647916c8449e4a221e4609a2
2014-11-02 15:11:19.324 Adobe Creative Cloud Cleaner Tool[1573:8801317] Deleting the payload: {78F4C3FA-BE2D-4392-A98A-68A3498E3E94} from the table ribs_payload and other associated tables for payloads
2014-11-02 15:11:19.324 Adobe Creative Cloud Cleaner Tool[1573:8801317] ERROR: Cannot delete the payload due to constraint: {78F4C3FA-BE2D-4392-A98A-68A3498E3E94}
To make things worse, Adobe Support Advisor has been discontinued, which could interpret errors contained in Adobe logs.
I contacted Adobe support via chat, and they simply told me that Illustrator CS4 was not supported for Yosemite, and did not offer any further help or information...
Any other ideas? Or am I simply stuck??
Thanks for all of your advice!

Illustrator CS4 view doesn't match view of same file in Acrobat

We're seeing a pretty strange problem with Illustrator CS4 (Mac and PC). The problem seems to happen ins CS5 and CS6 as well. We have a complex piece of artwork for a foil blister and we use a paragraph of text that has 3 transforms applied to which effectively step and repeat the paragraph of text in a repeat pattern across the artwork. This setup very precisely as it needs to be 100% accurate for print purposes as several units are printed side by side and the repeat runs across the units. Everything is setup correctly in Illustrator and then we re-save as a PDF with 'Preserve Illustrator Editing Capabilities' on.
We genearally save as a PDF 1.6 but we have tried all the combinations now. The file still looks perfect in Illustrator but when the PDF is opened in Acrobat (any version) the step and repeat (transform) on the paragraph of text is now no longer in alignment on onside of the artwork but still OK on one side. No matter what we do we can't fix this problem andit's recreatable each time. Also it's not file specific as we can build a new file and it will also exhibit the problem. We're only talking about a tiny jump here - <0.2mm but this means the artwork is out of spec. Any help is gratefully received!!!!

Hi Russell
Never a dumb question if it it had pointed us in the right direction. Yes the fonts are all embedded (legally). We tried the Acrobat Preferences but the don't make any difference. If we outline the fonts in Illustrator the problem still happens when we do a save as so it doesn't seem to be a font issue.
regards
Michael

Illustrator CS4 crashes when Photoshop is open

Hi, I have a problem with Illustrator CS4. Whenever I have Photoshop CS4 open at the same time as it, the program crashes completely, giving no error message to indicate why.
It runs totally fine as long as Photoshop isn't already open, or as long as you don't open Photoshop while it is still running. This is a nightmare when I want to draw certain things in Illustrator and then copy them over to Photoshop.
Anyone else experienced this or have any idea how to fix it?
My system specs:
Intel Core 2 Quad CPU [email protected]
3.5gb Ram
XP service pack 3

Opened up task manager as suggested before opening the programs, and noticed there were more processes running than expected. I ran Spybot Search & Destroy which seems to have picked up a few things ad-aware hadn't, and following a reset, the problem now seems to have disappeared.
Hopefully this is what was causing the problem and it isn't just pure chance that it is working ok for now...
Cheers for the suggestions

Illustrator cs4 photoshopexport.aip, photoshopimport.aip error osx 10.10

Hello
I have a problem with Illustrator CS4 Illustrator CS3 is working properly, reinstall did not help. Any ideas?
21.06.2014 22:02:14,724 Adobe Illustrator[12457]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
21.06.2014 22:02:37,834 Adobe Illustrator[12457]: Error loading /Applications/Adobe Illustrator CS4/Plug-ins.localized/Photoshop Formats.localized/PhotoshopImport.aip/Contents/MacOS/PSImport: dlopen(/Applications/Adobe Illustrator CS4/Plug-ins.localized/Photoshop Formats.localized/PhotoshopImport.aip/Contents/MacOS/PSImport, 262): no suitable image found. Did find:
/Applications/Adobe Illustrator CS4/Plug-ins.localized/Photoshop Formats.localized/PhotoshopImport.aip/Contents/MacOS/PSImport: mach-o, but wrong architecture
21.06.2014 21:59:22,195 Adobe Illustrator[12429]: Error loading /Applications/Adobe Illustrator CS4/Plug-ins.localized/Photoshop Effects.localized/Photoshop Adapter.aip/Contents/MacOS/PhotoshopAdapter: dlopen(/Applications/Adobe Illustrator CS4/Plug-ins.localized/Photoshop Effects.localized/Photoshop Adapter.aip/Contents/MacOS/PhotoshopAdapter, 262): no suitable image found. Did find:
/Applications/Adobe Illustrator CS4/Plug-ins.localized/Photoshop Effects.localized/Photoshop Adapter.aip/Contents/MacOS/PhotoshopAdapter: mach-o, but wrong architecture
21.06.2014 22:02:37,853 Adobe Illustrator[12457]: Error loading /Applications/Adobe Illustrator CS4/Plug-ins.localized/Photoshop Formats.localized/PhotoshopExport.aip/Contents/MacOS/PSExport: dlopen(/Applications/Adobe Illustrator CS4/Plug-ins.localized/Photoshop Formats.localized/PhotoshopExport.aip/Contents/MacOS/PSExport, 262): no suitable image found. Did find:
/Applications/Adobe Illustrator CS4/Plug-ins.localized/Photoshop Formats.localized/PhotoshopExport.aip/Contents/MacOS/PSExport: mach-o, but wrong architecture

it wasn't designed to be, and mac os updates don't make an effort to be backward compatible, but you can check other users' experiences, http://roaringapps.com/apps:table

Illustrator CS4 Error loading photoshopimport.aip

After I update system to Yosemite 10.10.2.....
I got a great problem with Illustrator CS4 which can't link to photoshop tif eps psd...........
I get the message "Error loading plugins". The plugin in question is "photoshopimport.aip".
I had re-installed all CS4 but still not work.
That mean I can't do my job by CS4 any more....OMG
I haven't use time machine......how can I go back the to systemX 10.9 ?
I hate Yosemite!!!!!!!!
Pls help!!!!!!

CS4 was - I don't know - 5 years ago?
In the meantime Apple has changed the development platform (you need software to develop other software) at least once. It would be kind of an effort to update all the old code. You first need to port it to the new development platform then update what doesn't work then go through all the testing etc. etc.
Kind of like the old yearbook you did back in the days in Quark XPress 3 and now that you have long switched to InDesign they ask you to dig that up to change some of the images and fix those 7 typos in the articles. I mean why do you charge that much for it, should be done in 20 minutes.

Keyboard shortcuts in Illustrator CS4

I have tried to customise keyboard shortcuts in CS4 but each time I quit I lose all settings. (they work fine til I quit). I have saved new sets, overwritted previous sets but they dont seem to save. What am I doing wrong.
Otherwise, speaking as a recent convert from Freehand, CS4 is wonderful now multiple pages have been added

We are experiencing the same problem in Illustrator CS4. We have saved a custom keyboard shortcut set only to have some of the shortcuts revert back when Illustrator is restarted. We have cleared the shortcut for "Reselect" and assigned command-6 to "Select Same Fill". The shortcut works fine until we quit Illustrator the the shortcut reverts back to "Reselect".

Touchup-Objektwerkzeug - Probleme mit Illustrator CS4

Similar Messages

Maybe you are looking for