Tour De Flex GoogleMaps Importing problems

I am trying to do googlemaps examples.
I am always getting same error codes 1046 1180.
Forexample at line
" var customOverlay:TooltipOverlay = new TooltipOverlay(latlng, "Marker #" + number); "
I think i got problems at importing
"import com.google.maps.examples.TooltipOverlay;" or "import com.google.maps.extras.markertracker.MarkerTracker;"
I got problems while using types from examples of extras.
I am using flex 3.2
How can i fix this examples and extras problems?

Did you download the Google maps SDK and add the SWC file to your project property?

Similar Messages

Error when using a Tour de Flex effect in my page

Hi,
I'm trying to use a 3DCube effect for my states. I found the animation in tour de flex and I downloaded the project.
After I import it, I couldn't try it. I have the following error :
unable to open 'D:\FlexWorkSpace\MXViewStackEffectExample\as3' MXViewStackEffectExample Unknown 1292545043357 311
Any help will be heavly apreciated.
Thank's.

UP !

Twitter in the Tour de Flex no connect

Hi,
I downloaded and installed in FLEX 4 the sample to connect to Twitter existing in the Tour de Flex,
and I do not work, when I enter the username and password is put on hold with the clock,
if I try to go directly to the Tour de Flex the program made the same.
My username and password are correct in Twitter.
Does anyone know what can be the problem?
thanks

Hello,
Solution is very simple, just uncheck the "Group items by category" to display last version of Tour de Flex feauture which is default checked
and if you uncheck the "Show only the latest versions.." you will see all other versions.
Regards,
Goze

Tour de Flex "Comments" button

Hi,
I'm still working with Tour de Flex and i noticed another little issue ^^
On the Web version the "Comments" button is desabled if there is no dedicated post to comment. However on the AIR version the button is enabled and when you click on it you have a little error message poping.
Problem is the message is hidden by samples (see the picture).
I guess the web version way of dealing with missing comments link should be ported to the AIR version
hope it helped.

http://forums.adobe.com/thread/496954?tstart=0

Tour De Flex is currently not working - desktop or web version. Why?

I'm trying to install the TourDeFlex air app. from this link:
http://www.adobe.com/devnet/flex/tourdeflex.html
When doing so, the app installs and I can run it, but when trying to select 'What's Flex', then I get 'NOT FOUND'.
Can anyone help me?

Sure, there are folks with the authority, but it isn't me. I forwarded your prior post to the person I think can make the decision. We'll see what happens. Basically, Paul is correct. The TDF sources have been donated to Apache, the problem now is that Apache folks don't have the bandwidth to resurrect it on Apache servers. Apache is a volunteer community so if folks want to pitch in to help, let us know on the [email protected] mailing list.
I just lurk on this forum trying to help when I can, mostly to try to get folks to move to Apache Flex. It is no longer under my set of responsibilities. I am still and Adobe employee, but I'm supposed to spend 100% of my time trying to make Apache Flex as good as it can be. Over at Apache, we've even got an alpha of a next-gen Flex SDK and tool chain called FlexJS that outputs MXML and AS to JS. A different set of folks support Adobe Flex and Adobe Flash Builder, but only via issues raised via Adobe Support. I don't believe they watch this forum.
The future of Flex is in the hands of the Flex developers who get involved with Apache Flex. Adobe has only promised five years of support for Flex 4.6 (since it announced the donation to Apache) and has no plans to make any future releases. Over at Apache, Adobe has no influence over Flex. There Flex can live on forever with out fear of surprises from corporate strategy changes. So, if you like Flex and want to keep using it, join the Apache Flex mailing lists and contribute code, testing, answers and help upgrade Tour De Flex. Over 400 bugs that are in Adobe Flex 4.6 have been fixed in Apache Flex releases.
There is no big company like Adobe pouring big money into Flex like it used to. It is up to you, the folks reading this forum, to contribute what you can and collectively create its future. Adobe is actually spending serious money to help by paying me and some others, but it isn't like it used to be. Flex is now truly a community project.
Hope to see you over at Apache,
-Alex

Can Tour de Flex run without internet connection

Hi
I have installed TourDeFlex.air, but unfortunately it requires internet connection to browse the components.
Do you know if it is possible to run Tour de Flex without internet connection?

From an earlier post by Nicolas Mertens:
"here's what I got from Customer Services about this problem:
[Help] files are located in the following location:
C:/Program Files/Common Files/Adobe/Help/en_us/InDesign/6.0. Also
from that location, you can launch the file 'index.html' and this
should direct you to *the online help that you would access through
the program itself.*"
I found that the files are not at that location, but at C:/Program
Files/Common Files/Adobe/Help/en_GB/InDesign/6.0 (this is in Windows
Vista, by the way). "
Yours would presumably be at [the German equivalent of
..]/de-DE/InDesign6.0, or whatever your locale is (AT, CH...)
Noel

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Final Cut Pro/GY-HD111E import problems?

Final Cut Pro/GY-HD111E import problems?
With a brand new Mac Pro and very latest Final Cut Studio complete with updates I'm having a little problem trying to import footage directly from a JVC GY-HD111E (yes I'm in PAL land, UK) via FireWire into FCP.
Footage is 720p/25p and timeline is set up in FCP that way.
I'm doing a 'capture now'. The first clip I'm trying to import is about 45 minutes long with no cuts/breaks whatsoever.
What happens is after about 60 seconds or so, it FCP automatically breaks the clip for no reason and starts a new one, trouble is, when it does this I lose about 4 seconds of footage at that point.
It continues to break clips randomly, sometimes after 40 seconds or so, sometimes after 95 seconds, but usually between 30 seconds and 2 minutes and each time it starts a new clip I lose between 1 and 6 seconds.
As I say, there are zero breaks or cuts in this clip, I have a 45 minute clip that was shot in one take, not even a pause anywhere.
Is this a JVC issue or a Final Cut issue?
It's a pain as it simply means I can't import my 9 hours of footage hence I can't get on with this project.
Any ideas why this phenomenon is happening?
Thanks guys.

I mean I get the same errors.
Let me explain again.
There are NO start/stop/pauses in this clip.
I'm trying to import just ONE clip with no breaks, again, there are NO start/stop/pause, it is one continuous clip of 15 minutes duration.
The JVC creates some sort of errors at the Firewire output stage, it drops frames or other errors, FCP gets confused and creates a new clip, even though it is the same clip, but due to the GoP structure, it looses a few seconds too hence I can't import the footage as I keep loosing bits here and there mid clip. It is randam, every 30 to 100 seconds or so it will do this.

Annoyed with JVC/Final Cut Pro import problem; will they ever fix this?

Annoyed with Final Cut Pro JVC import problem; will they ever fix this?
I've shot footage on JVC GY-HD111E in the UK in 720p/25p PAL mode.
I'm trying to import lots of short clips (average 10 seconds) into Final Cut Pro (latest version with 720p/25p support) with a new Mac Pro maxed out with ram and 3 extra internal HDs.
Problem is, on a scene-break i.e. pause/stop, Final Cut detects this and creates a new clip, but it takes about 5 seconds to 'searching for media" before it starts the new clip. Because some clips are only very short, this 5 second delay sometimes means I only get the final few frames of a clip, rather than the entire 5 seconds or so of it.
JVC UK are blaming Apple and are saying it is up to them to fix it as Premiere and Edius does not have this problem.
However, Symbiosis in the UK (who do HD-Connect box) say that the JVC ProHD cameras do not wrap the shots up properly at the end, they are kind of left open and this creates problems on scene-breaks.
I've tried turning off the "create new clip on timecode break" etc, but it does not make any difference, when I do this it simply quits capturing on a scene break. Besides I have about 300 cutaways like this and I don't want to spend the rest of the year breaking them up on the timeline as this would be a futile and long workflow.
I'm importing and working on a native HDV 720p/25p timeline and this is the way I want to work. I've already imported and edited 4 hours of footage, but these 4 hours were easy as all 4 tapes had no start/stop points, they were recorded continuously from beginning to end of tape for 64 minutes each time so importing was no problem; 1 clip per tape.
But now I've come to my 5 tapes containing hundreds of cutaways I'm kind of screwed and need some advise on how I can import them natively in HDV without losing this 5 seconds off the beginning of each clip whilst FCP searches for the media each time.
I've been told this issue is definately with FCP, any ideas how I can get around this?

I haven't heard of this JVC/FCP problem, so I can't comment on it. However, whoever shot the cutaways didn't do you, the editor, any favors.
I've been doing video since 1984, and I've got to say, anyone who shoots a scene that is only 5 or 6 seconds long on tape is making a huge mistake, and it's been that way since the beginning of computerized editing in the late 70s.
Shoot at least 5 seconds of pre-roll before the shot begins, then roll tape for at least 5 seconds after you've got the shot. That's the protocol I've followed for 22 years now. Tape is cheap, edit suite time isn't.
But laying down only 5 to 6 seconds for a scene is wrong, IMO.

Tour de Flex app and plugin crash

I launch Tour de Flex in Mac OS with latest version of AIR
installed and I get this error:
This application requires a version of Adobe AIR which cannot
be found.
Please download the latest version of the runtime from
http://www.adobe.com/go/getair,
or contact the application author for an updated version.
Please help!
Thanks,
Ben

Weird - it doesn't require any specific version of AIR.
Are you guys running AIR 1.1 or 1.5?
Is it only when launched from Eclipse or standalone or both?
Greg Wilson
Adobe
http://gregsramblings.com

Tour de Flex Samples needed Adobe AIR plugin to PC to run ?

Where I may find free/open-source sample autonomus Adobe AIR Apps?
How I test if Adobe AIR success installed?
Tour de Flex Samples needed Adobe AIR plugin to PC to run ?

Hello,
Solution is very simple, just uncheck the "Group items by category" to display last version of Tour de Flex feauture which is default checked
and if you uncheck the "Show only the latest versions.." you will see all other versions.
Regards,
Goze

Imovie Mac importing problem or Camcorder problem?

I run a small business for kids parties. I video the kids dancing along to a track they have recorded (played on a cd player). Then i import the video, turn off the camcorder sound and import the finished mixed track of their singing and sync the picture and audio together. This has been working perfectly for over a year. But unfortunately in the last month when i try to sync up the audio track with the video, it starts off synced up perfectly, but gradually as the video goes on the video and audio become out of sync and by the end the video is either too fast or too slow. this is a huge problem! I thought it may the tapes in the video camera so i changed them and it's still doing it. Is this a video camera problem or computer importing problem. Can anyone help as it's ruining the kids DVDs!

I am surprised it has ever worked. That can normally only be done with synched professional equipment. Maybe they changed the CD player at the performance and the old one happened to play at the same rate as your Mac when it imports? (There is a slight difference between the playback speed between different players)
Or perhaps your video camera has become slightly worn, so it pulls the tape slower?
There are endless possibilities for problems with your setup.
I think you should take a look at the "add scaled" tip at the bottom here:
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
(Instead of adding the extracted audio from iMovie, you should add the CD audio.)

Import problem with DMP file

Hi all
I am using oracle 9i and I have problem in import problem.........
when i try to import the DMP file it gives me the error,
IMP-000200: long column Too larege for column buffer size <22>
can any body please tell me how to get out of this error....
actually I have a table in export file that has round about 2 lac rows....
The problem occurs on that table.
Any help will be highly appreciated
Thanks in advance
Regards
Shayan
[email protected]

The correct error code is IMP-00020 not 200
What's your current buffer set to when imp?
IMP-00020: long column too large for column buffer size (number)
Cause: The column buffer is too small. This usually occurs when importing LONG data.
Action: Increase the insert buffer size 10,000 bytes at a time (for example). Use this step-by-step approach because a buffer size that is too large may cause a similar problem.
As adviced, increase 10000 and try again.

Tour De Flex GoogleMaps Importing problems

Similar Messages

Maybe you are looking for